Cisco Switching/Routing :: Upgrade IOS In 6500 VSS?
Mar 25, 2012how to upgrade IOS in switch 6500 connect in VSS from 12.2(33)SXI IOS to 12.2(33)SXJ?
View 3 Replies
ADVERTISEMENT
Cisco Switching/Routing :: Upgrade 6500 Non Modular IOS To Normal 6500?
Dec 21, 2011how can we upgrade 6500 non modular ios to normal 6500 ios?
View 5 Replies View RelatedCisco Switching/Routing :: Upgrade IOS In 6500 SUP 2T
May 21, 2012I have WS-C6509-E chassis with VS-S2T-10G supervisor.
Currently I have IOS " S2TIBK9-15001SY - Cisco CAT6000-VS-S2T IOS IP BASE FULL ENCRYPT "
Can I upgrade the IOS to " S2TISK9-15001SY - Cisco CAT6000-VS-S2T IOS IP SERV FULL ENCRYPT " without purchasing this IOS?
Will I face issue in TAC cases?
Cisco Switching/Routing :: Upgrade 6500 IOS 12.2(17d)SXB11a To 15.1SY?
May 1, 2013we have a customer who needs to perform upgrade on their Core 6500 Switch IOS from version 12.2(17d)SXB11a to 15.1SY.Is this a supported upgrade path and can it be done directly?
View 11 Replies View RelatedCisco Switching/Routing :: Upgrade 6500 Sup2T From 15.0 To 15.1
Jun 4, 2013I am trying to upgrade Sup2T from 15.0 to 15.1 (same feature sets). I have the new image in bootflash and have changed the boot system statement to boot from the new image and the config register is 0x2102. However, everytime it reboots it loads the old image. [code]
View 4 Replies View RelatedCisco Switching/Routing :: Upgrade Supervisors In 6500 VSS
Apr 15, 2013Today we have 2 VSS, and are about to buy another two 6500 chassies to bulid a new VSS. Our currens chassies have supervisor 720, and the new one will probably have SUP2T
We have a network design that allowes us to run on a single chassie per VSS if we have hardware failure. This means that in a really worst case scenario we need to move around hardware to have 3 system up and running (that would mean multiple failures on all systems... so really really worst case scenario )
So here is my first question. Can I run a VSS with different supervisors in the chassies? Second question: If I want to upgrade a VSS from SUP720 to SUP2T, cna I run 2 supervisors per chassie (quad supervisor VSS) where one supervisor is SUP720 and one is SUP2T?
Cisco Switching/Routing :: Dual Core / SUP 720 6500 IOS Upgrade?
Apr 29, 2012Doing a bug scrub on our dual core, dual Sup 720 6500s tonight. We are going from s72033-advipservicesk9_wan-mz.122-33.SXI4a.bin to SXI9. I want to get a second set of eyes on my script since I have not done this for about 1 1/2 years. Following this doc:[URL]
Script:
Backup
sh ver
remote command switch show version
[Code].....
Cisco Switching/Routing :: Upgrade Couple Of 6500 Series Switches
Apr 11, 2012My task is to upgrade a couple of 6500 series switches, 6513 with SUP720/MSFC3 (WS-SUP720) and Policy Feature Card 3 (WS-F6K-PFC3B) installed. How to upgrade those switches if in SSO redundancy mode with two SUPs installed?
I understand that it is good to connect to the MSFC3 via console and upgrade this first, is this correct?
I also have to upgrade some 6509 but I only can test it on one 6509-E, how to get everything up to date. [code]
Cisco Switching/Routing :: 6500 - Upgrade From SUP720 To SUP2T With New Chassis?
Apr 28, 2013We recently purchased 2 Cisco 6500 series switches (with Sup 2T). These switches will be replacing our old 2 6500 series switches (with Sup 720).
We have 70 vlans and 90+ closet switches (2900) connecting the core switches We have 2 WLC connected to the core switch. We also have a 1 x 1 connection to a VSS switch which in turn connects to our Server Co-Location data center utilizing IPSec & GRE tunnel to connect to our Server Co-Location data center.
Our routing protocol is EIGRP. Our VTP domain at Server Co-Location is separate from our location “A” campus. I was wondering what is the best way to migrate our Core switches at location “A” campus.
The requirement is we would like to replace these switches with minimum downtime.
Cisco Switching/Routing :: Any Challenge To Upgrade Core Switch 6500 Series From Nexus 7009 Which Runs NxOS
Jan 28, 2013Is there any challenge to upgrade core switch 6500 series from Nexus 7009 which runs NxOS, because i have 3750X series switches connected at distribution and access layer in my network topology??
Is there any challenge if we place NxOS in core and IOS in distribution and Access layer??? how we are able to match sh run config in existing 6500 switch to Nexus 7009 NXOS?
Cisco Switching/Routing :: 6500 Switching Fabric Bandwidth 720 Is Calculated?
Jan 21, 2012As per my understanding 6509 all slots are dual channel, so 9 slot * 40 per slot (20 g in and 20 g out) = 360 GB How cisco claim the 720 ?? What about the 6513 chassic switch fabric connection?
View 5 Replies View RelatedCisco Switching/Routing :: 6500 / High Switching Processor Utilization?
Sep 20, 2012I am seeing a strange situation on my 6500 switch?By having snmp walk on '1.3.6.1.4.1.9.9.109.1.1.1.1.3' (== cpmCPUTotal5sec), I came to know that there are two processor and the cpu util for switching processor is gone to 88 % and some time creeps to 99 %.
snmpwalk -v2c -c "removes" sw6500 '1.3.6.1.4.1.9.9.109.1.1.1.1.3'
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.3.1 = Gauge32: 12 (--- this is for CPU of Router Processor )
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.3.3 = Gauge32: 99 (--- this is for CPU of Switching Processor )
but when I do sh process cpu on the console, all looks normal as it shows cpu utilization of RP. why the value is so high on the switching processor ?
Cisco Switching/Routing :: IP Routing On 6500 Series Versus 3750?
Jan 24, 2013For intervlan routing, Is 'IP routing' command enabled by default on a 6500 series switches based on the IOS?and on 3750 switches, do we need to enable the "ip routing" command manually for intervlan routing?
View 1 Replies View RelatedCisco Switching/Routing :: 6500 / Restricting Inter-VLAN Routing?
May 9, 2013I'm looking to restrict Inter-VLAN routing through L3 switch (cisco 6500) and wanted to know best possible way to do it. I used VACL and achieved success to some extent, but my config is making clients take up to 5-6 mins to authenticate IP address from the DNS (bootps).My VACL config was as follows:
Subnet to restrict is 10.100.15.0 (VLAN 15)
STEP 1: Created extended ACL to allow bootpc/bootps through DNS
ip access-list extended EACL_DNS
permit udp any eq bootps any
permit udp any eq bootpc any
STEP 2: Created standard ACLs to allow only relevant subnet, server VLANs & some IPs from other subnets for printers/scanners etc.
ip access-list standard SACL_VLAN_15
permit 10.100.15.0 0.0.0.255 (the subnet I'm restricting)
permit 10.100.50.0 0.0.0.255 (server VLANs)
permit 10.100.25.45 0.0.0.0 (printer in another VLAN which has to have access in VLAN 15)
STEP 3: Created VLAN access list
vlan access-map VACL_15 10
match ip address EACL_DNS
action forward
vlan access-map VACL_15 20
match ip address SACL_15
action forward
STEP 4: Applying VLAN Access list on VLAN 15 vlan filter VACL_15 vlan-list 15 Though the above works, below is noted:
1. I'm still able to PING 10.100.15.2 (the switch virtual interface) from outside the subnet, which I don't intend to do so. Howeve all cients in the subnet have no connectivity from outside the VLAN 15.
2. As mentioned its taking quiet some time to negotiate with the DNS server at system boot time.
Cisco Switching/Routing :: 6500 MSFC No IP Routing Command
Jun 2, 2012I used to "ip routing" command in order to enable inter-vlan routing, for example with 3750 cisco. I have a 6503 cisco with SUP720 MSFC3. I was able to create some vlans but I can not configure inter-vlan routing.
sw#conf t
Enter configuration commands, one per line. End with CNTL/Z.
swsur(config)#ip routing
[Code]....
Cisco Switching/Routing :: IP Routing On 6500 Series Vs 3750?
Oct 30, 2011For intervlan routing, Is 'IP routing' command enabled by default on a 6500 series switches based on the IOS?hes, do we need to enable the "ip routing" command manually for intervlan routing?
View 2 Replies View RelatedCisco Switching/Routing :: IP Routing Command In 6500?
Mar 16, 2013Where is the "ip routing" command in Cisco switch 6500 series?
is the ip routing enable by default accoridng to the: [URL]
Cisco Switching/Routing :: Difference Between 6500 SXJ And SXI?
Nov 25, 2011i would like to check out what's the difference between the naming convnetion for the 6500 IOS.
I read the data sheet to support my POC deployment to support NCS v.1 the 6500 IOS need to upgrade to 12.2 (33) SXI
Is it able to work if i using SXJ instead of SXI, with the same IOS version 12.2 (33)?
Cisco Switching/Routing :: TFT On 6500 Using Different Vlans And VRF
Jul 24, 2012I have tried to test copy tftp: numerous time with no success. I believe the reason it is failing is my laptop to Ethernet port is in vlan 62 and the tftp process operates in a different IP space.I am using gig 7/1 and configuring my laptop nic for x.x.x.254 mask 255.255.255.0. I can ping from laptop to gateway) and I can ping from the switch to my laptop using ping vrf production x.x.x.254. Can you tell me what vlan I need to set my laptop connection in or if there is something else I need to change to make tftp work on vlan62?Does TFTP only work in vlan1 or can it be changed?
View 2 Replies View RelatedCisco Switching/Routing :: 6500 ACL Using QoS Not Working
Jul 16, 2012We are setup like a hotel style workers camp. We have wings full of rooms and residents with 3750 stacks in them. Those switches connect back to our core 6500's. The network is mostly all Layer 3, interfaces are routed with IPs.
When it was built before my time they included an ACL for each wing so that residents couldn't access internal devices (IE SSH to 6500) but I've come to notice it's not working.
I see hits on the ACL for accepts but nothing is hitting the deny rule at the top.Here is the configuration below:
mls qos aggregate-policer INTERNET1 24000000 80000 80000 conform-action transmit exceed-action drop
mls qos aggregate-policer INTERNET2 24000000 80000 80000 conform-action transmit exceed-action drop
mls qos aggregate-policer INTERNET 24000000 80000 80000 conform-action transmit exceed-action drop
[Code] ....
Cisco Switching/Routing :: Does OTV Supported On Cat 6500
May 6, 2013On googling I came across documents that say OTV (Overlay Transport Virtualization) is supported on Cat 6500. Any authentic information whether OTV is supported on Cat 6500, especially with Sup-720B? FYI, Cisco Feature Navigator does not mention it.
View 1 Replies View RelatedCisco Switching/Routing :: High CPU On 6500
Mar 19, 2012SUP2T-D#sh proce cpu hist
11111111111 1111 1111 1111 1111
0000000000099999000099999000099999999990000999900009999999
0000000000099999000099999000099999999990000999900009999999
100 **********************************************************
90 **********************************************************
80 **********************************************************
70 **********************************************************
60 **********************************************************
50 **********************************************************
40 **********************************************************
30 **********************************************************
20 **********************************************************
10 **********************************************************
0....5....1....1....2....2....3....3....4....4....5....5....
0 5 0 5 0 5 0 5 0 5
CPU% per second (last 60 seconds)
SUP2T-D#sh proce cpu sorted
CPU utilization for five seconds: 100%/83%; one minute: 99%; five minutes: 99%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
416 3324188 879928 3777 13.05% 14.42% 14.45% 0 Spanning Tree
633 104408 5091 20508 1.50% 0.53% 0.45% 0 Env Poll
75 22000 298 73825 1.10% 0.13% 0.07% 0 Per-minute Jobs
168 69696 163563 426 0.39% 0.23% 0.22% 0 slcp process
2 532 1010 526 0.07% 0.00% 0.00% 0 Load Meter (code )
Cisco Switching/Routing :: QOS On 6500 Switch?
Feb 17, 2013I am trying to guarantee 100mbps for a vlan across a gig link. I have done some research and found this command for switches
mls qos srr-queue input priority-queue 2 bandwidth 20
However it doesn't seem to work for my 6500. I know the 6500 uses PFC for QOS but I have no idea how it works. how I can guarantee a vlan 100mbps across a 1gig link?
Cisco Switching/Routing :: 6500 Quad VSS
Jul 12, 2011We are getting ready to start testing Quad VSS for our production VSS environments we have done the research and per documentation it seems pretty straight forward.
I want to make sure that the dual to quad VSS is easily done across our multiple VSS setups and I am curious of those that have done this already have you ran into any gotchas on the turn up of the ICS Sup?
Also, just a ICS in a single chassis instead of one in both chassis of the VSS?
In one of our environments we have all single home devices going to VSS switch 1 and only dual homed devices. going to switch 2 so may be desireable to only install an ICS in the switch 1 VSS.
Cisco Switching/Routing :: MLS On 6500 With Sup2T
Aug 9, 2012Cisco 6500 with 2T supervisor engine with following software Cisco IOS Software, s2t54 Software (s2t54-IPSERVICESK9-M), Version 15.0(1)SY1, RELEASE SOFTWARE (fc4)
The problem is that, I am not able to configure Multilayer Switching (MLS) (mls rp ip) in the global config command. Although the "mls" is visible on the config menu. but when I say "mls ?", the router prompt "unrecognize command"
Not sure if SUP 2T support MLS or it come with different name.
Cisco Switching/Routing :: 6500 - Hardware QOS Trust?
May 8, 2012I have a question which i am unsure of, on the 6500 i know i can set mls qos trust to cos or dscp since I don't have any trunks configured on that switch that i want to trust cos most of my ports trust dscp instead. The question is will packets coming in or going out at L3 with the TOS bits set get placed in the correct in/out queue. For example if a packet comes in on a port with a mls qos trust dscp and has the TOS set to XX will this XX get mapped to the correct COS value based on the default dscp to cos map and end up going out the correct queue which handles that specific COS number?
I mainly asked this because i saw the following on the cisco site and again i am suing dscp trust and not cos.
Weighted Round Robin (WRR), Deficit Weighted Round Robin (DWRR) and Shaped Round Robin (SRR). WRED and all the Round Robin scheduling options use the priority tag (CoS) inside an Ethernet frame to provide enhanced buffer management and outbound scheduling.
Cisco Switching/Routing :: 6500 - Stacking Over Fiber?
May 23, 2012Someone had told me the 6500 switches can be stacked via fiber. This feature is available for the 3750s?
View 7 Replies View RelatedCisco Switching/Routing :: 6500 DHCP Not Giving IPs
Jan 15, 2013I have this message "DHCP Timeout"on few cisco IP Phones .try to assign IP manually and it's working fine.. seems DHCP not giving IP's to those.. 6500 have configured as DHCP pool.
View 1 Replies View RelatedCisco Switching/Routing :: Server With 2 Link To 6500 Non-VSS
Dec 6, 2012i have server with two uplink to pair of 6500 non-VSS, this server member of vlan 100 sw-1 is active HSRP while sw2 is a standby HSRP , how can i make this server forward traffic on both Link . the server admin told me only one link is active (green) on the server while the other link is orange
View 5 Replies View RelatedCisco Switching/Routing :: CoPP Logging On A 6500
Mar 19, 2013I am looking for a way to see packets that are matched on certain ACLs in a CoPP policy map. I have read that it is not a good thing to add the log keyword at the end of an ACL when using that ACL for CoPP. I initially tried to use a logging policy map but the 6500 12.2sx doesn't support this.
how I can see source/destination IP for a certain class in a CoPP policy map?
Cisco Switching/Routing :: 6500 Migrating L2 To L3 With OSPF In LAN
Feb 4, 2013We have an existing network with a core 6500 as a VSS connecting 4 buildings with 4500 chassis under which number of L2 switches are connected. Currunlty we are using RSTP in ring for redundancy but we want to use OSPF in LAN for faster conversion.All the VLAN's are created on 6500.
View 4 Replies View RelatedCisco Switching/Routing :: 6500 What Happens When A Supervisor Fails
Feb 3, 2010We've been mocking up a test lab to test VSS on two 6500's. Each 6500 has one sup720 and a 6708-10ge blade and we've established the two 10ge links between the two chassis; the first from the each chassis' sup and the second from each 6708.My question is, what happens when the supervisor fails on one of the chassis?
View 10 Replies View RelatedCisco Switching/Routing :: Logging Commands On 6500
Oct 11, 2012I am looking for soem best-practice and useful logging commands on 6500 and 3750 platforms. Some of them I have listed below. Is there any important ones I am missing Also, I need to know what kind of recommended logging level is for buffer and what is loggign level for syslog server?
View 1 Replies View Related