Cisco Switching/Routing :: High Memory Utilization Of 3560 Switch After Upgrade IOS

Mar 5, 2013

I upgrade the IOS of my switch 3560 from   C3560-IPBASE-M), Version 12.2(25)SEB4,  To   C3560-IPBASEK9-M), Version 12.2(55)SE5 after that the utilizatio of the memory increase to 80% I attached the output of show memory statistics history

View 5 Replies


Cisco Switching/Routing :: C2960-24-TT-L - Switch Memory Utilization High After Upgrading IOS

Nov 8, 2011

I upgraded the newest IOS 15.0(1)SE for our SW C2960-24-TT-L, the process was succeseful. However, we found SW memory utilization raised to 82% this morning in normal situation. (Momery: Total 21341260, Used17471692) Did you guys meet the same problem after upgrading to 15.0(1)SE? I also would like to know what the normal memory utilization is? and what is the impact of memory utilization highly?

View 8 Replies View Related

Cisco Switching/Routing :: High Memory Utilization SW 3750

Sep 6, 2012

I have a Switch WS-C3750E-48PD-SF with IOS 12.2(58)SE2 which reports more than 80% in utilization of memory I don't know what is causing the high memory utilization.

View 14 Replies View Related

Cisco Switching/Routing :: 6509 High Memory Utilization?

Dec 6, 2011

I've noticed that my 6509's running VSS seem to have high I/O memory utilization.
I/O memory: Sw/Mod         Bytes:       Total           Used           %Used
             1/1                      8126344        7886544             97%
             1/2                     11796240       11442472             97%
             1/5  RP                 12058384       10715832             89%
             1/5  SP                  8388608        8104304             97%
             1/7                      8126344        7886544             97%


View 5 Replies View Related

Cisco Switching/Routing :: 2960 High Memory Utilization

May 2, 2013

I noticed on the 2960 switches we have deployed that are running the latest IOS, 12.2(58)SE2, memory utilization is really high (almost 80 percent). I have not noticed any side effects but I wanted to verify this is acceptable. My question is does the high memory utilization matter? I see this may be related to bug CSCtw83946 but no resolution is mentioned.
I did some testing various IOS revisions and below is what I have found using a WS-C2960-48TC-L with default configuration and only my laptop connected to a switchport in vlan1. You will notice memory utilization will grows with each version but jumps drastically with 58. One difference with 58 I needed to use a different command to retrieve memory utilization. The output was gathered by pasting the output of the show command into the Cisco Output Interpreter on their website.
Show Command
show memory

View 8 Replies View Related

Cisco Switching/Routing :: High Memory Utilization In WS-C2960-48TT-L

Nov 9, 2012

I am facing high memory utilization in Cisco 2960 switch having IOS version 12.2(55)SE3.
The error we are getting is:
A "LiveHealthAlarm" event has occurred, from SwCiscoIOS device, named Switch2960.  eHealth Alarm Start Time - Fri 09 Nov,2012 - 03:02:48 eHealth. Switch2960-RH-MemoryPool-Processor-Processor-1.Memory utilization high-Threshold set at 70%SPECTRUM ALARM ID|22233284 I have attached the logs also.

View 3 Replies View Related

Cisco Switching/Routing :: 3750 Stack - High Memory Utilization?

Jan 21, 2012

I have a new cisco 3750 stack comprised of 8 members (6 x 3750G-48PS and 2 x 3750V2-48PS) running 'c3750-ipservicesk9-mz.122-58.SE2.bin'. I am seeing high memory utilisation, it seems to sit fairly stable and I do not see an increase but this has only been running a few days. No errors or performance issues. Should this be a cause for concern?

View 3 Replies View Related

Cisco Switching/Routing :: 3750g And 3750x High Memory Utilization?

Jun 11, 2013

We had a stack of 4 qty 3750g running IP base on ver 12.2.32, then installed a 3750x to the stack and upgraded the whole stack to 15.0.2 SE3. In doing so, we noticed that the memory utilization jumped from 60-70% to 83-84%.
We had the same issue occur when upgrading to 15.0.2 SE3 on another stack that was 6 qty 3750g running ip-services, but this one jumped to 90%.  On the 6 qty stack, we downgraded to 12.2.55 and the memory util went back down to 60-70%. 
On the mixed stack, we replaced the 3750x with another 3750g and downgraded the whole stack to 12.2.55, however, the memory utilization did not drop down.  As far as I can tell, no config changes have changed from the original IOS. 

View 4 Replies View Related

Cisco Switching/Routing :: High Memory Utilization On Line Card 6748 And 6724?

Apr 15, 2012

I am writing with regard to a high memory utilization that we have on a pair of line card WS-X6748-GE-TX and WS-X6724-SFP for a VSS 6500. I am enclosing a little part of the "show tech"of this VSS 6500 where is possible to see the high memory utilization of the line cards 1/1, 1/2, 2/1, and 2/2, in despite of having some ports in state connected.  In addition of this, the IOS installed on VSS 6500 is s72033-ipservicesk9_wan-vz.122-33.SXI6.bin for checking if there are some bugs affecting the behaviour of the Switch for this case.
 System Resources
  PFC operating mode: PFC3C
  Supervisor redundancy mode: administratively sso, operationally sso
  Switching resources: Sw/Mod    Part number               Series      CEF mode
1/1      WS-X6748-GE-TX            CEF720           CEF
1/2      WS-X6724-SFP              CEF720           CEF


View 1 Replies View Related

Cisco Switching/Routing :: High Fabric Utilization On 3560-e

Nov 2, 2010

I am looking at the utilization on a Catalyst 3560-E.  I am running a test with eight 1 GIGE links RXing at 95 % utilization.  All of the traffic is going to a TenGigE port.  The device on the TenGigE port is echoing back all of the traffic received, so the 1 GIG links are TXing at 95% as well.When I do a "show controllers utilization", the port utilization numbers are correct, but the fabric utilization is higher than I would expect.  The fabric should be 128 gigbits / second in this switch, and there is 7.6 gigabits TX/RX to the ten gig port.  The fabric utilization is at 49%.  I would expect 7.6 / 128 = 5.9% or possible double that. [code]

View 8 Replies View Related

Cisco WAN :: High CPU Utilization On 3560 Switch

Oct 6, 2009

We are facing a weird problem of high CPU utilization on 3560 switch. Even without connecting  a single PC to switch, CPU utilization is showing 22 %. Any particular reason for this? Can configuration affect the CPU utilization even though there is no PC connected?

View 5 Replies View Related

Cisco Switching/Routing :: High Memory And CPU With 3750 Stack Switch?

Dec 26, 2012

We are having 3750 Stack switch as our edge switch. Here we are having some issues as low memory & itermediate High CPU utilization.For memory when we checked its shwoing maximum memory is allocated to DHCPD receive & ARP Input as follows
Processor Pool Total:   70829380 Used:   56809532 Free:   14019848
      I/O Pool Total:   12582912 Used:    8554920 Free:    4027992
Driver te Pool Total:    1048576 Used:         40 Free:    1048536


i want to understand why this 2 proceses (DHCPD & ARP input) taking more memory?High CPU: We also facing intermediate high CPU utilization (above 95%). When CPU is high there were 2 processes consuming more CPU are 'Spanning Tree' (about 20%) & ARP Input (about 66%). we also checked the ARP entries, there were 1500 ARP entries & 2 incomplete ARP (out of 6000 ARP supported)

View 6 Replies View Related

Cisco Switching/Routing :: High CPU Utilization In 3750 Switch

Oct 19, 2012

In Cisco 3750 facing high CPU utilization for specific period. During this period traffic response times across the switch degrades. Steps to identify interface potentially generating traffic. I have attached 'sh proc cpu history' , ' sh ip traffic', 'sh proc cpu sorted'  during troubled period .

View 5 Replies View Related

Cisco Switching/Routing :: High CPU Utilization On Switch 2960?

Feb 16, 2012

I am a new network engineer on a retail company and I am having a problem on the High utilization of my 3-stack switch 2960 only during Peak Hours of the Store Sales.
Note: on Peak hours, it is peaking at 90-95 %
here is the utilization after Peak hours:


View 4 Replies View Related

Cisco Switching/Routing :: High CPU Utilization On 4006 Switch CAT OS?

Sep 5, 2012

I have been facing High CPU Utilization issue with few of my Cisco 4006 Switches together from last one month. Out of which 1 switch issue sorted out auto after 2 days however the problem is still exists with rest 3 switches.They are 6-7 year old and having one SUP engine and other are switch port modules.

View 5 Replies View Related

Cisco Switching/Routing :: EWA14 - High CPU Utilization In Core Switch

Dec 20, 2011

I am experiencing high cpu utilization in my 4000 series core switch.
I checked the loggs. i saw some strange loggs.
Please see the below logs:


What is the "invalidsourceaddresspacket" ?
Is this is due to some virus attack or something?? Also one more thing this switch is the Active router in HSRP.

View 12 Replies View Related

Cisco Switching/Routing :: High Utilization On 3750x Switch Stack?

Feb 25, 2013

i am seeing very high utilization on a random basis on the stack. and the logs indicate me that there is a pattern where there is a stack power cable shows inserted (which was never unplugged) followed by sudden spike in the utilization.
001018: *Mar  6 16:21:22.138: %PLATFORM_STACKPOWER-6-CABLE_EVENT: Switch 4 stack power cable 1 inserted
001019: *Mar  6 18:18:37.982: %SYS-1-CPURISINGTHRESHOLD: Threshold: Total CPU


View 16 Replies View Related

Cisco Switching/Routing :: Very High CPU Utilization Core Switch 4503?

Feb 14, 2012

We  had a core switch(30 vlans) in our environment and it's noticed that  CPU utilization of the core switch is showing high during recent days. I  have checked logs and processes, but couldn't find the root cause. The  issue found only in the office hourly only(after that the cpu  utilization is idle and normal). I have already referred the following  link to troubleshoot the issue " [URL]
see the following outputs from the core switch
CPU utilization for five seconds: 99%/0%; one minute: 99%; five minutes: 99%
PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process
  30   6687557041432420936        466 47.52% 47.10% 45.98%   0 Cat4k Mgmt LoPri
  55  30667074884269560256          0 45.36% 45.50% 45.85%   0 IP Input
  29  28552856922870089254          0  3.59%  3.50%  3.57%   0 Cat4k Mgmt HiPri

Note: Each Invalid source mac entry in each day from same port (above is the output after clearing logs before 3 days)
My queries regarding the issues are following
1) How can we find root cause regarding the high cpu utilization?

2) Is a single invalid mac address makes the cpu highly utilized for suppressing it?

View 10 Replies View Related

Cisco Switching/Routing :: High CPU Utilization On 4510R Switch With Dual SUP V -10G

Feb 14, 2012

We have a problem of igh CPU Utilization in Cisco 4510R-with dual SUP V-10G modules.
Cisco 4510R switch is the CORE switch and have 30 no's of VLans. It was running PVST/PVST+ previously. But Now we have migrated to MST. But after upgradation the CPU utilization reached alomst 98%.

View 2 Replies View Related

Cisco Switching/Routing :: ME3400 Switch High CPU Utilization Due To ARP Input

Sep 3, 2012

We have Cisco ME3400 switch, with configuration described below.
GE0/1 port is uplink:
interface GigabitEthernet0/1
description ***MATED-IUB_C&U-Plan***
port-type nni
switchport trunk allowed vlan 331,450,4085
switchport mode trunk
GEo/2 is configured as below:

interface GigabitEthernet0/2
description ***From NIB***
port-type nni
switchport access vlan 4085
We have also tried Loopguard feature enabled on all ports: but after some period same problem is repeated.
version information is below:
Cisco IOS Software, ME340x Software (ME340x-METROIPACCESSK9-M), Version 12.2(25)SEG3, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 25-Jul-07 22:56 by amvarma

View 8 Replies View Related

Cisco Switching/Routing :: 2960 - Switch Port High Utilization

Aug 16, 2012

In my network we use all cisco 2960 switches, problem is when someone copying  4gb data or high from one switch to another switch, by that time rto (Request time out) is coming.

1. when user 1 copy data from server ,at that time who is in switch2 behind like user2 ,he is getting problem like when ping to default-gateway,or rto is coming and network is very slow .
2. when i open sw2,sw1,sw3,trunk ports utilization is very high except sw4 to sw1 trunk ports,who behind sw4 like user4 ,he is not getting problem.
3.all switches trunkport in my network is faster ethernet and i have no option to connect trunkport to gigaehternet and ethernet channel.

View 2 Replies View Related

Cisco Switching/Routing :: WS-C3750G-24TS-S1U High CPU Utilization In 3750 Switch Stack

Jan 30, 2012

WS-C3750G-24TS-S1U switch stack with high CPU utilization. 3 switches are stacked and using PBR on that. I am attaching the show cpu process as an attachment.The current template is "desktop routing" template.The selected template optimizes the resources in the switch to support this level of features for 8 routed interfaces and 1024 VLANs. [code]

View 0 Replies View Related

Cisco :: LMS 4.0.1 - High Memory Utilization

Oct 12, 2011

What causes LMS 4.1 to have high memory utilization?

View 4 Replies View Related

Cisco WAN :: High Memory Utilization In 7206 Router

Jul 29, 2012

We have a 7206 router which acts as a MPLS Hub router for around 100+ remote locations. Bandwidh at mpls hub(terminated on this router) is 50 Mbps.
We have noticed that Memory utilization in this router gradually increases and when it reaches 100% this router hangs. It happence in frequesncy of 10 days and we have to restart the router when memory is 100%.
CPU utilization is normal i.e below 20%, WAN bandwidth will never cross 30mbps.
We are running OSPF on this router

View 1 Replies View Related

Cisco Firewall :: Very High Memory Utilization In PIX 515e?

Feb 15, 2012

We had two PIXes in our environment and working as a active-failover mode. Its noted in now a days the active PIX memory utilization is 98% and for standby PIX it is 96%. And also in some times we were experiencing packet loss to the ip of active PIX and which reflects in the inside servers access also. During that time the active pix was not accessible via ssh as well as ASDM. We have tried reloading the PIX and changing failover state of the PIX, but it results only a temporary solution. Current memory installed is 128 MB (maximum upgraded), so a upgrade is also not possible. Please see the show command outputs from the PIX. Current Software version is 7.2(4)
sh memory output (PIX 1 - active)
 Free memory:         4850944 bytes ( 4%)
Used memory:       129366784 bytes (96%)

1) How we can pin point the root cause of this high memory utilization?

2) What might be the reason for the high memory utilization for the standby pix (96%), still the PIX is in idle state?

3) Is it a hardware issue or a memory leak issue, then how can we find out?

4) Is a software upgrade to new version resolves the memory issue?

View 10 Replies View Related

Cisco Infrastructure :: 2960 - High I / O Memory Utilization

Oct 26, 2011

We recently installed two 2960, both of them with this fw version:

Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)
The switches see very few traffic (under 40MB on all interfaces, summed, so far), however, I/O memory utilization is about 80% as can be seen from the show memory command:
Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)
Processor    2B89A18    73969000    27198964    46770036    45060368    29367536
      I/O    6200000    14680064    12185292     2494772     2323116     2380896
Driver te   1A00000     1048576          44     1048532     1048532     1048532
The memory allocated is almost all Packet Data, by init, "sho memory io dead" returns  zero, the memory usage seems constant, there are no errors on the log, the switches operate correctly, no packet has ever been dropped, CPU usage is about 4%.
Here I showed info for one switch, the other is in the same situation. I just want to know if this behavior is expected, I don't want to find out problems when the switches will be in production whit real traffic.

View 5 Replies View Related

Cisco :: High Memory Utilization After Few Days - Ciscoworks LMS 4.0.1

Sep 18, 2011

I have the problem that our ciscoworks server gets out of memory after few days. The memory utilization is always getting higher an higher (above 95%). Sometimes it is only after 3 days and sometimes it is after 1 week. So it happens not regularly. I have made an screenshot from the services which use a lot of memory. And at this time the memory utilization is getting higher and higher again....I think there is a problem with tomcat or dbsrv10.exe, there are also a lot of cwjava.exe running.

View 8 Replies View Related

Cisco Firewall :: High Memory Utilization On ASA 5510

Sep 13, 2012

We recently added about 400 users to our network for a total of 1000.  Looking at the ASDM we are holding very tight to 75% utilization and we have 256mbs.  This is also running IOS 8.2(1).  Our firewall recently crashed after a major download was forced through it.  This was after only being booted up for about a week.  We had reloaded it a week prior after having ran it for about a year without issue.  We havent made any changes in the last month other than adding more users to our network.

View 3 Replies View Related

Cisco Switching/Routing :: Upgrade TAR IOS Image In 3560 Switch?

Oct 31, 2012

I wanted to upload image having .tar extension in Cisco 3560 switch. What are the steps to upload.

View 1 Replies View Related

Cisco Switching/Routing :: 2960-S High Memory Use In 15.0 (2) SE

Dec 9, 2012

I am noticing high memory used on my 2960-S I am running 15.0(2)SE.  I am concerned that there is a problem with this model and IOS. 

View 2 Replies View Related

Cisco Switching/Routing :: 3560 - CEF Has Been Disabled Due To Low Memory

Jul 15, 2009

I have a 3560 connected to an edge device and I keep etting this error.  I have turned off proxy arp and turned off ip cef under the interface, however I lot connectivity to the internet when I did that.  I can't seem to find any documentation on this error. I understand what it means, I just don't know how to resolve the problem.

View 3 Replies View Related

Cisco Switching/Routing :: 3560 CEF Has Been Disabled Due To Low Memory

Jun 7, 2013

I have a 3560 connected to an edge device and I keep etting this error.  I have turned off proxy arp and turned off ip cef under the interface, however I lot connectivity to the internet when I did that.  I can't seem to find any documentation on this error. [code]

View 5 Replies View Related

Cisco Switching/Routing :: High Process Memory 6509?

Nov 13, 2011

which process is consuming high memory with my c6509 switch.

View 17 Replies View Related

Copyrights 2005-15, All rights reserved