We got the below alert when we ran the PCI scan on our VPN firewall (use it for remote access VPN).
OpenSSL SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG Ciphersuite Disabled Cipher Issue
Solution- Upgrade to OpenSSL 0.9.8j or later.
ASA 5510 running 8.2(2)
I have an 5510 running 8.4(1) I can ssh into the system with no problems until I scan the device with Nessus security scanner. After that I just get timeouts from the client when I try to connect and the only way to fix the problem is to reload the device. I have included 2 syslog dumps one showing ssh into the device before(working) the scan and one after(not working).I do not have any acls on that int and I have turned off basic threat detection. The devices is still running I can login via the serial console and via ASDM it just appears ssh is someone shutdown or hung.
WORKING
4/21/2011 11:33:43 AM 192.168.11.108 Debug %ASA-7-609002: Teardown local-host testing:192.168.65.106 duration 0:00:104/21/2011 11:33:43 AM 192.168.11.108 Informational %ASA-6-302014: Teardown TCP connection 50 for testing:192.168.65.106/4462 to identity:192.168.11.108/22 duration 0:00:10 bytes 3691 TCP Reset-O4/21/2011 11:33:43 AM 192.168.11.108 Informational %ASA-6-315011: SSH session from 192.168.65.106 on interface testing for user "test" terminated normally4/21/2011 11:33:40 AM 192.168.11.108 Informational %ASA-6-605005: Login permitted from 192.168.65.106/4462 to testing:192.168.11.108/ssh for user "leeh"4/21/2011 11:33:40 AM 192.168.11.108
[code]....
NOT WORKING
4/21/2011 12:38:17 PM 192.168.11.108 Informational %ASA-6-302014: Teardown TCP connection 86 for testing:192.168.65.106/1954 to identity:192.168.11.108/22 duration 0:05:01 bytes 0 Connection timeout4/21/2011 12:38:17 PM 192.168.11.108 Debug %ASA-7-609002: Teardown local-host testing:192.168.65.106 duration 0:05:014/21/2011 12:33:15 PM 192.168.11.108 Debug %ASA-7-609001: Built local-host testing:192.168.65.1064/21/2011 12:33:15 PM 192.168.11.108 Informational %ASA-6-302013: Built inbound TCP connection 86 for testing:192.168.65.106/1954 (192.168.65.106/1954) to identity:192.168.11.108/22 (192.168.11.108/22)
Im having problems with google saying we generate to much traffic to [URL]
I need to know which machines on the inside are talking so much with google. Can this be done via ASA 5510? do i need a third party program for this?
I have a cisco ASA 5510 that I have set up currently to access via ASDM through the Inside interface. When I VPN in using our older VPN server I can connect to it fine. I recently set up the ASA to also be a VPN server which will eventually replace the older server for our HQ. I noticed that when I'm VPN using the ASA as the VPN server, I can only ASDM to the public which I prefer not to allow. Access to the inside doesn't seem to work this way. What configurations if any would be causing this. I'm assuming it's some thing I need to adjust in the VPN configuration.
View 3 Replies View RelatedI have a Cisco 5510 which has remote access VPN configured.Now I have new block of IP address, is there a way I can just change the outside interface IP so that people can remote in without doing anythng else?Or if I coulds be taught to create a new one.Or best way to approcah this issue?For example: it was 67.64.x.x now I need to change to 64.44.x.x.
View 1 Replies View RelatedHow to designate access-list for the remote access vpn users in order to let them access specific subnet or host,asa 5510 and acs is in the picture
View 9 Replies View Relatedis there any method on the asa 5510 let u see the history of the remote access vpn connection for the last week
View 6 Replies View RelatedI have a remote VPN with split tunnelling enabled. Currently, users connected to this VPN browses internet with his/her internet connection. Now, my requirement is that a roaming user connecting to the vpn must use our company's internet connection for his browsing purposes. How can I do this?Equipment we are using: ASA 5510
View 3 Replies View RelatedI am using two firewalls to connect two different offices. Firewall 5510 is running ASDM 6.3 and 5505 is running ASDM 6.2, Problem is that even after connecting two sites, i am unable to ping remote network from either side. I am mentioned static route as tunneled.
View 1 Replies View RelatedHow would I go about configuring RADIUS based AAA for remote access VPN users? I have an OSX RADIUS server and an ASA 5510
(I want to keep console and SSH using LOCAL, so I keep this: "aaa authentication ssh console LOCAL", right?)What does the rest of the config look like to get RADIUS based AAA for remote access VPN users?
I am try to configure ASA 5510 with 8.3 IOS version.My internal users are 192.168.2.0/24 and i configured dynamic PAT and are all internet .
i want configure identity NAT for remote access VPN.Remote users IP pool is 10.10.10.0 to 10.10.10.10
i know to configure NAT exemption in IOS 7.2 version. But here IOS 8.3 version. configure NAT exemption for 192.168.2.0/24 to my remote pool( 10.10.10.0 to 10.10.10.10).
keep getting this message from my firewall:A port scan was detected. Local IP:192.168.xxx Remote IP: 192.168.1.xxx. Protocol: UDP.Action Taken: BlockedWhat does this mean?!!? And what effect will it have? Simple question for pro's.
View 2 Replies View RelatedI have a remove access vpn configured on my ASA 5510 which works fine, VPN pool easily allocates IP to all remote used , but they have few network drivers shared on their machines & most of them are linked using the computer name rather than the IP which normally doesnt work as VPN pool doesnt provides the DNS IP to the remote clients . Is it possible to allocate DNS IP with the VPN IP ?
View 1 Replies View Related I have a problem with a Remote Access VPN on a ASA 5510 8.6.2 .I have created a IPSEC Remote Access VPN through the wizard this is pretty much a base install on the ASA without much configuration.
I can connect to the ASA via the Remote Access client and get TX just no RX therefore i cannot access any of the LAN resources. [code]
I want to setup remote access for my Android phones and tablets using Cisco ASA 5510 . Is there any particular Android client which perform the specified functionality.
View 1 Replies View RelatedI have not really set up ASAs nor VPNs on Cisco devices before. I'm currently attempting to configure a remote access VPN between ASA devices, a 5505 and a 5510. The 5510 is meant to be the server and the 5505 is meant to be the easyvpn client. The reason I am opting for remote access as opposed to site to site is that I have many 5505s at remote sites that I will need to configure in the future, and they will be moving around a bit (I would prefer not to have to keep up with the site-to-site configs). The 5510 will not be moving. Both ASA devices are able to ping out to 8.8.8.8 as well as ping each other's public facing IP.
Neither ASA can ping the other ASA's private IP (this part makes sense), and I am unable to SSH from a client on the 5510 side to the 5505's internal (192) interface. I have pasted sterilized configs from both ASAs below.
ASA 5510 (Server)
ASA Version 8.0(4)
!
hostname ASA5510
domain-name <domain>
enable password <password> encrypted
passwd <password> encrypted
[code].....
I have an end user who uses the Anyconnect VPN client to connect to our network through an ASA5510. He has a satellite ISP provider and is experiencing latency issues. Since latency issues are inherent with satellite services and since he has no other ISP alternative, any tweaks that may boost performance/reduce latency with his connection. Typcally, he sees slow performance and also network drives being intermittently available on his Windows 7 computer. he also has an internal wireless router at his home when he connects remotely. Performance when connected through a standard cable broadband connection is fine.
View 2 Replies View RelatedI have configured a remote access VPN on my Firewall ASA5510. Everything worked fine and I can successfully connect through the VPN. The problem is I cannot ping or connect to any of my internal network resources. I tried to add a new NAT route from outside to my internal servers using the defined pool but due to a new ASA version there are many changed I see in the NAT routes
View 37 Replies View RelatedI am trying to configure remote access VPN to my network, i have a Cisco ASA 5510 IOS 7.0(7).
I configured the VPN using ASDM 5.0.9 and below is the configuration received:
access-list 90 extended permit ip 192.xxx.xxx.0 255.255.255.0 192.xxx.xxx.248 255.255.255.248
access-list ClientVPN_splitTunnelAcl standard permit 192.xxx.xxx.0 255.255.255.0
ip local pool VPNIpPool 192.xxx.xxx.250-192.xxx.xxx.252 mask 255.255.255.0[code].....
I am having asa 5520 in my head office and in branches 2811 routers.i connected two branches with my HO through VPN.now i configured remote vpn client in HO asa . now i need to access all the branches using this remote client.how i create route in HO ASA.
View 7 Replies View Relatedip local pool VPNPOOL 192.168.200.1-192.168.200.100.
i can access servers with remote vpn which they located at dmz zone at asa(write nonat access-lsit) but i can not 192.168.193.0 subnet at asa.i configurated proxy server. my proxy server inside interface get ip address my dmz zone(172.16.10.254) and outside is ip adddress asa outside interface (10.0.0.254).the users (192.168.193.0/24) go internet from proxy server.
[code]....
why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
!
ASA Version 8.2(5)
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.6.0.12 255.255.254.0
[code]....
I am having trouble making my remote access vpn decrypt traffic. I am using an ASA5510 and the cisco 5.0 vpn client. I have no problem getting the tunnel to come up. But the "decrypted traffic" stays zero and the "discarded traffic" increments continuously.Here is the ASA5510 crypto config:OK I guess this site doesn't allow pasting text so I attached the config.I am pretty sure that I can't pass traffic because I have not been able to figure out how to specify the interesting traffic for the vpn connection. What is the syntax for this? It looks like it should be some kind of tunnel- group commands.
Am I the only one who thinks that the Cisco documentation is worthless on this subject? The ASA config guide gives you everything you need to set up a tunnel, but has absolutely nothing on the config required to actually pass traffic.
Router: ASA 5510
We have changed the ISP, so therefore new wan ip-addresses.
Internet works, and site-to-site vpn works, but I'm failing to localice why the remote access vpn won't work.
I have a problem with ASA 5510 8.0(4) This is a remote-access VPN setup and it's functional, no problems here...
But I keep getting logs like this every few seconds:
Group = <censored>, Username = <censored>, IP = <censored>, Reaper overriding refCnt [0] and tunnelCnt [0] -- deleting SA!
Group = <censored>, Username = <censored>, IP = <censored>, SA lock refCnt = 0, bitmask = 00000080, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 0, qm_secret_key_cb = 0, qm_encrypt_cb = 0
I have a ASA 5510 configured for IPSec remote access VPN.It works nicely and can see the private LAN behind the ASA.My problem is that I have other networks connected to this ASA via site-to-site tunnels that I would like to open up to remote access.
I have added these networks to the split-tunneling ACL's and added NAT exemptions for those networks.This doesn't seem to work.
I need a way to block MAC OS X users connecting remotely to our coporate users over VPN. I know there is an option to block connections based on VPN client Version, but cant find a way to block users based on operating system.
We use Cisco ASA 5510 firewals one with v8.2(1) and other with v7.2(3). I need to do on both firewalls. They are both at diffrent sites.
why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?
I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
!
ASA Version 8.2(5)
!
interface Ethernet0/1
[Code]....
I'm configuring ASA 5510 Remote Access VPN, I can connect from Cisco VPN Client to the ASA VPN. I obtain from ASA some routes to inside networks, but I can't do any ping to those inside hosts. I have got those error in ASDM log file: [code]
View 1 Replies View RelatedIs the following sysntax correct in removing a remote access vpn address pool and inserting a new one on an ASA5510?
(config)# NO ip local pool BWCVPN 192.168.200.1-192.168.200.128
(config)# ip local pool BWCVPN 192.168.300.1-192.168.300.128
(confif)# tunnel-group BWCVPN ciscovpn general-attributes
(config-general)# address-pool BWCVPN
I have successfully installed and configured VPN Client - Version 5.0.07 to connect to ASA 5510 from a remote workstation. Here is the problem, I cannot ping any of the servers or workstations after I successfully connect. I can ping the ASA 5510 using its internal LAN IP, but no other nodes will respond on the remote LAN.
View 2 Replies View RelatedI have 2 sites :
site A :
ASA 5510
VPN gateway for remote users
LAN 192.168.192.0/22
site B :
ASA 5505
LAN 192.168.208.0/22
Both sites are connected through a site to site VPN.Remote clients (AnyConnect/VPN client) can connect to Site A LAN and see machines on LAN A but cannot see Site B LAN.
Here is a part of my configuration :
On Site A (ASA 5510)
--------------------------------
name 192.168.192.0 SiteA_Internal_Network
name 192.168.208.0 SiteB_Internal_Network
name 192.168.133.0 VPNPool_AnyConnect
name 192.168.133.32 VPNPool_VpnClient
[code]....
We have configured site to site VPN tunnel from offshore to client location using ASA5510 and accessing RDP from client location. Also configured remote VPN access at offshore location. But using remote VPN client we are able to get RDP from officeshore location but not able to access RDP from client location. Is there any additional changes required ?
View 4 Replies View Related