Cisco Firewall :: ASA 5520 CIFS Doesn't Work For Share Folder On Windows Server 2008 R2
Jun 26, 2010
I am using ASA5520 with webvpn for file sharing. But recently we just upgraded the OS that accommodate file shared folder from win2003 R2 32bit to windows server 2008 R2 64bit. Now I have a problem with accessing file share by ASA webvpn, it appears error contacting host, we have tested the file shared of webvpn on the other OS windows 2003 and windows 2008, they are working on these OS except win2008 R2. Current the ASA OS version is 8.0(2). And the windows firewall has been disabed.
View 3 Replies
ADVERTISEMENT
Aug 9, 2008
I've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies
View Related
Mar 28, 2013
I installed Windows 8 on my Dell laptop and my bluetooth device doesn't work properly. When Windows 7 was installed and my laptop and my Samsung Galaxy S3 were paired I could play songs from my phone on my computer. But now it is not possible on Windows 8.
View 1 Replies
View Related
Jul 26, 2012
We are using the newest release of AD Agent (1.0.0.32.1, built 598). The ASA Firewalls 5520 are having the software release 8.4(3)8 installed.When somebody tries to connect thru the Identity based firewalls from a citrix published desktop environment (PDI) the connection is not possible. Checking the ip-of-user mapping on the firewalls (show user-identity ip-of-user USERNAME) mostly doesn't show the mapping of the USERNAME and the PDI the user is logged in. The user-of-ip mapping of the PDIs IP-address shows mostly other users, which then are used to authenticate the acces thru the firewalls.
What is interesting, that on the AD Agent using "adacfg.exe cache list | find /i "USERNAME"" i can't see the PDIs IP-address neither because it is mapped to another user.Is Citrix Published Desktop environment supported to connect thru Identity based Firewalls? How AD Agent, Domain Controllers and Firewalls are working together? On the firewalls with "show user-identity ad-agent we see, the following:
-Authentication Port: udp/1645
-Accounting Port: udp/1646
-ASA Listening Port: udp/3799
Why Cisco does use 1645 and 1646 and not 1812 and 1813?The Listening Port is used for what purpose? we tried the AD Agent modes full- download and on-demand with the same effect.
View 17 Replies
View Related
Feb 9, 2013
how can i share one folder from nas server to different network
View 1 Replies
View Related
Oct 18, 2012
I have a computer with some shared files on that I my LAN can access. However this is only on the immediate LAN The computers then all go in to a router which has NAT enabled and connects to the rest of the work network. I have opened up port 135 through 139 both UDP and TCP etc How can I add this folder as a network share on the computers outside of NAT (it even has a web address pointing to it that works for the web file server)
View 3 Replies
View Related
Jul 9, 2012
I want to configure ad agent on windows server 2008 R2 SP1 with all need patch installed.When i try to connect to DC with adacfg dc list, status is UP. Log ADOBserver's don't show any errors. But when try to do command "adacfg cache list", result - empty. In what may be the problem? Perhaps it is related to the language of the OS?
View 4 Replies
View Related
Sep 6, 2011
I came across a situation where a client had an old PIX 525 running PIX 6.2. There was a Windows 2008 R2 server running Exchange 2010 that was having trouble delivering email to a handful of email servers. We then found out that we could telnet to these servers on port 25 but got no return traffic. We then went back the old email server that was running Windows 2003 Server and could telnet to port 25 on these email servers and got a response, saw the banner and could issue commands. The first thought was reverse DNS which we thoroughly checked and it was not. I turned off the smtp fixup protocol and that didn't fix it either. From workstations on the network running XP or Windows 7 or Linux you could telnet to these servers and you would get a response but just not with 2008 server. I spent hours on the phone with Cisco support and it was determined that the packets were returning and we could capture the packets on the outside interface but they were then dropped by the firewall. Using the 6.2 version of PIX we could not determine why the packets were being dropped. I suggested upgrading to the next major version to be able to troubleshoot the issue further. We then upgraded the PIX to version 7.0(8). After the upgrade we were able to telnet to the problem mail servers from Windows 2008 Server and there were no issues. Is there a know issue with Windows 2008 Server and PIX 6.2?
View 1 Replies
View Related
May 6, 2012
[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
View 10 Replies
View Related
Sep 9, 2012
I have assigned a task to configure a vpn between windows 2008 server and cisco asa 5505, what kind of vpn should i go with as the windows 2008 server r2 is on cloud and is it possible to configure site-to-site vpn for this network senario or not.. i have try ikev1/ipsec remote access vpn with l2tp with (CHAP, MS-CHAP v2) and couldn't find any document which will allow me to configure windows 2008 server to behave a client and connect it to asa, well what i did is that i configured a dail-up connnect with l2tp and found the following debug message
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, Oakley proposal is acceptable
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, IKE SA Proposal # 1, Transform # 1 acceptable Matches global IKE entry # 1
[Code].....
View 1 Replies
View Related
Jun 7, 2011
I want to share any folder or drive only one user amongst 20 at windows xp.How?
View 1 Replies
View Related
Sep 11, 2011
Here is what we are trying to do: (server names have been changed to protect the innocent, etc.)3 servers at 3 different locations - all running Server 2008 R2 and all on the same domain
setup:
server01 (has the print server role and printers are shared out)
server02 (has the print server role and printers are shared out)
terminal_server (a terminal server)
We have printers on server01 and on server02 that we need to install on terminal_server.The printers install just fine onto terminal_server from server01 when browsing and connecting or opening the shared printers.
The printers on server02 give thes error message when trying to connect to or open them from terminal_server:"The operation could not be completed (error 0x00000709). Double check and make sure that the printer is connected to the network."However, the printers from server02 will install and work just fine IF I install them as IP printers.
View 6 Replies
View Related
Jan 14, 2013
i am setting up a windows server 2008 to be used as a nas on my bell modem network that my pc is also on. the bell modem is then connected to a dlink 655 router by lan on the bell modem to wan on the dlink. the dlink is used for wireless connections to the laptops in the house. my problem is that the laptops cant see my nas but have access to the internet. should i switch my program for the nas from windows server 2008 to something like free nas or can i change setting in my router and modam?
View 1 Replies
View Related
Jan 27, 2011
Normally, when one right clicks on a drive letter having opened 'My computer', then select 'Sharing' there is a warning about sharing a whole disk and the option to accept anyway.One laptop doesn't offer that. It just shows the admin share of C$ immediately. If I choose 'New' at the bottom of the panel a new drive letter and drive name can be entered but it can never be accessed over the network! It shows up in the workgroup but I get a network error 'Network path not found' if I try to access it. I can ping the laptop from anywhere by name and IP address.The laptop can access all the other PCs without any problem.
View 12 Replies
View Related
May 28, 2012
I'm trying to mount a network share from a Linksys NAS200 to Fedora 16.
The program I am trying to run won't accept network addresses to save to. I ran it without specifying the IP address of the server and it comes up with some random IP. I specified an IP and it can't find the device.
Here are the errors:
[root@HOME ~]# mount -t cifs -v //NAS_SERVER/public/ /mnt/ -o username=user,password=pass
mount.cifs kernel mount options:
[Code].....
View 3 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
Jan 13, 2012
My computer has today 3x2 TB WD Green disks and thay are really slowing my system down so now I need to move them to somekind of NAS.I was first lookin at the "Synology Disk Station DS411j" but then I found that I got some old hardware laying around (AMD 3200+ CPU, 1 GB ram,XFX GeForce 7600GT, Seasonic SS-300FT in a Thermaltake Xaser II chassi). So now I got some questions :
1. I was looking into running FreeNas on my NAS but if the NAS is crashing then it will be alot of work to get the data back? Is it right that its not possible to just mount a drive from the FreeNas in to my Windows7 computer and read the data?
2. If I install Windows 2008(not r2 that demands 64bits CPU) and then uses dynamic volums to get one big volume, what will happen if this Windows2008 craches? will it be able to place one of the disks in my windows7 computer and reda the data?
3. What happens if one disk i a dynamicvolume craches? will all data be lost?
4. Is there any sleepmode in Windows2008? If would be nice if the computer shutsdown at night and startsup when it is about to be used.
5. Will a finished product like the "Synology Disk Station DS411j" demand less power? Will I earn anything to buy the DS411j instead of my old hardware if we look on the economics?
View 2 Replies
View Related
Oct 2, 2012
We have a Cisco ASA 5520
We are attempting to setup RRAS on Windows 2008R2 using L2TP. Server is on the inside of the network at 10.10.10.20 our ASA is 10.10.10.1 its outside interface is 68.0.0.0.3/28.
I set a static NAT rule to allow all traffic pointed at 68.0.0.4 to be directed to 10.10.10.20 and have ACLs allowing the following.
esp, ah, udp/500, udp/4500, udp/1701
Mac Clients have no issues with but windows clients seem to hang and never connect. I know the ASA configuration is somehow to blame, if I attempt to connect to LAN IP (10.10.10.20) from withn the same network every thing works fine (making sure all the Windows Issues are covered).We have 2 other IPSEC tunnels established to teh ASA from our COLO and a Satalite office, not sure if this makes it any harder.
View 2 Replies
View Related
Sep 14, 2011
We are in the process of upgrading our win2003 radius server with a new win2008 radius server. We have an ASA5520 and FWSM in 6509, using anyconnect client. This has worked fine until we introduced the win2008 radius server. When in the asdm on the asa, you can click on the new server and click test and authenticate ok with your AD credentials. But when try to use anyconnect on your laptop, it takes the credentials password and the accept certificate, but then fails with "anyconnect was not able to connect to specified gateway.." message, then "the secure gateway has rejected the connection attempt due to network connectivity issue...host or network is 0" message. We thought we setup the new radius the same way, obviously not. is therw an easy way to use debug on the firewalls to see what is wrong? looked in event logs on radius server, have not found anything.
View 2 Replies
View Related
Feb 11, 2011
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies
View Related
Dec 14, 2010
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
View 19 Replies
View Related
Mar 7, 2013
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies
View Related
Aug 13, 2012
I have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies
View Related
Feb 8, 2009
Does WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies
View Related
Sep 4, 2012
I am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
View 4 Replies
View Related
Jul 17, 2011
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies
View Related
Mar 24, 2012
Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies
View Related
Jan 9, 2013
I have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies
View Related
Nov 5, 2011
i m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies
View Related
Jun 17, 2012
I want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies
View Related
Nov 8, 2011
Is it possible to use windows server 2008 as a webhost for a website i'm building?
View 6 Replies
View Related
Feb 7, 2012
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
View 17 Replies
View Related
Oct 25, 2011
How to successfully get a Dell Wireless 1397 to work with Windows 2008 x64? I have a Precision M4500 that I managed to install Windows 2008 x64 R2 on. I installed the Windows 7 drivers for the card and the Device Manager says the device is working properly. But when I go to enable the device, it acts like it is enabling it, but the properties always say "disabled".
View 1 Replies
View Related
