Linksys NAS200 - CIFS Share Mount Errors?
May 28, 2012
I'm trying to mount a network share from a Linksys NAS200 to Fedora 16.
The program I am trying to run won't accept network addresses to save to. I ran it without specifying the IP address of the server and it comes up with some random IP. I specified an IP and it can't find the device.
Here are the errors:
[root@HOME ~]# mount -t cifs -v //NAS_SERVER/public/ /mnt/ -o username=user,password=pass
mount.cifs kernel mount options:
[Code].....
View 3 Replies
ADVERTISEMENT
Jun 26, 2010
I am using ASA5520 with webvpn for file sharing. But recently we just upgraded the OS that accommodate file shared folder from win2003 R2 32bit to windows server 2008 R2 64bit. Now I have a problem with accessing file share by ASA webvpn, it appears error contacting host, we have tested the file shared of webvpn on the other OS windows 2003 and windows 2008, they are working on these OS except win2008 R2. Current the ASA OS version is 8.0(2). And the windows firewall has been disabed.
View 3 Replies
View Related
Sep 13, 2011
does e4200 have cifs support. I ask because I have a hard drive connected thru the usb and trying to setup nas storage. But for the hp touchpad to mount it it needs cifs I guess.
View 1 Replies
View Related
Sep 13, 2011
I'm thinking to buy a E2500 router for my house. Is it possible to wall mount it?
View 7 Replies
View Related
May 10, 2012
Can the EA4500 be wall mounted? I don't see any provisions on the underside EA4500 to support securing to a wall.
View 9 Replies
View Related
Jan 4, 2012
Is there a wall mount bracket for the E2500 or is there a way of attaching this to a wall.
View 1 Replies
View Related
Sep 13, 2011
I have a AIR-AP1121G-A-K9 running c1100-k9w7-tar.123-7.JA2 (Autonomous)We have monitoring setup with Orion NPM and we consistently see output errors, Transmit discards and big buffer errors The users at the site have not reporting any issues but was wondering how to prevent these or are these normal?What causes the output errors on Wireless Radio ? How to troubleshoot further ?
Radio0-802.11G
Total Output Errors 0 47749
Small Buffer Misses
4 misses
139 misses
[code]....
View 1 Replies
View Related
Jul 4, 2012
This is a multi site network. Site A has a Cisco 3825 router and connects to 3 other sites over ISP A and 2 other sites over ISP B. Both ISP A & B provide a layer 2 full mesh network. ISP A provides a 100mb pipe while ISP B provides a 20mb pipe.
File transfers (Windows - CIFS) over ISP A's fiber are fast enough and throughput is good. However, file transfers (Windows - CIFS) over ISP B's fiber are slow, even though latency is good. On the 100MB ISP A pipe, file transfer speeds up to 6 M Bps are achieved. On the ISP B 20MB pipe, speeds up to 300KBps are seen for file transfers.
ISP A connects to an on board gig port on the 3825. ISP B connects to a fast ethernet port on an HWIC-2FE card on the same 3825. Both ports then connect to ISP Switches and then full meshed to remote site Cisco routers. What could be the issue? Why am I facing these issues only with ISP B even though the configs for ISP A and ISP B are the same?
View 1 Replies
View Related
Jun 20, 2012
I currently have a problem with connecting to some CIFS shares on a EMC NAS. I have created some bookmarks for those shares to be used via the client less SSL VPN portal. I have also setup SSO which works properly for web-bookmarks and RDP stuff but not for the CIFS shares.
When I try to access those shares I'll always get a "authentication failed" error message. Afterwards a new log in-box is displayed. I have been able to log in to those shares by using the user-ID prefixed with the domain name [URL]. Log in fails when using only the user-ID or for example DOMAIN user-ID. I have also tried with a share on a different Server (windows2008 R2) which works without any problems.
View 1 Replies
View Related
Dec 5, 2012
I am having trouble accessing shares via client SSL VPN. I have an ASA 5505 running 8.4(4)1 The share is on on Ubuntu server 11.04 running Samba 3.5.8
This may not be strictly a Cisco issue and it seems to be an interoperbility issue between ASA and Samba. Or simply the smb.conf configuration.
I suspect the issue is down to the interpretation of Lanman on the ASA as I know the usernames and passwords work correctly when accesing the shares from other platforms (Windows Vista and Ubuntu desktop 12.04)
When monitoring the Samba logs I get the following errors: (amongst others)
ntlm_password_check: NT MD4 password check failed for user testuser
Storing account testuser with RID 1000
check_ntlm_password: sam authentication for user [testuser] FAILED with error
[Code].....
View 1 Replies
View Related
Dec 13, 2011
Any replacement bracket or some other way to easily mount the 942l in a window? i have a long window next to my front door i want to just stick this someone about shoulder high in that window looking right to the door so will see anyone who comes.
View 5 Replies
View Related
Jan 20, 2012
I mounted the router to the wall with the 2 screw holes and screws. Now I want to take it off from the wall, but it is stuck
View 4 Replies
View Related
Dec 5, 2012
anybody with 2 x rack mount kits for a SRW208P that they don't want? I need to rack mount these devices but my predecessor very wisely decided to throw them out and Cisco does not sell the racks as a separate SKU.
View 1 Replies
View Related
Mar 22, 2013
I am still new to wireless. I have been studing for my CCNA Wireless for about 6 months now so I still have a lot of questions.
Right now I have to deploy some new APs. We are using 3502e APs. I have a qustion on how to mount antennas for these access points. I have to make a mounting bracket the new installations. What was done with the previous APs was to mount a unistrut beam to an I beam in the building. There is 2 AIR-ANT-1728's and 2 AIR-ANT-5160V-R antennas mounted straight out on the unistrut. Then they put a T bracket on the unistrut and mounted a second bar 90 degrees from the main bar and connected the third 1728 and 5160 antennas on the second mounting bracket. So we have 4 antennas in a row, and two off to the side 90 degrees from the other 4 antennas.
My question, is this OK to have them this way, or would it be better to have all 6 antennas in a straight line when I fabricate my new AP brackets?
Here is a picture of what I am talking about. This would be looking at it from above.
Current New Proposal
__________o__o__o__o_ _________o__o__o__o__o__o
| AP AP
|
|o
|
|o
View 7 Replies
View Related
Nov 22, 2011
I need to install a AIR-AP1231G in one of our facilities. Its desired location is on a 1" thick solid steal wall filled with concrete. I thought maybe mounting it with a magnet would be easier than tap and die. Any reason I shouldn't use a high powered magnet to mount it with?
View 3 Replies
View Related
Mar 20, 2011
Recently i have been having LOADS of problems with my wireless router. Every now and then it will decide that 2 of my 3 computers will not be allowed to connect to the internet. and i will have to spend hours of resetting and rebooting computers to get it to work again.. only for the issue to start again a few hours later. I recently added the third computer but im not sure how that would be an issue.
the router is a Linksys (cisco) WRT54G2.. a
View 1 Replies
View Related
May 23, 2011
Im having dns problems ever since PSN went back online and i cannot connect to the internet with my PS3 or log onto PSN. At first i would get dropped as soon i joined an online game, and it was running very slowly, but now it wont connect at all.
View 4 Replies
View Related
Apr 26, 2012
I am looking for a wall mount bracket reference, for these 2 models of antennas :
- AIR-ANT5160V-R
- AIR-ANT2506
Something like that :I was not able to find any reference in cisco product list.
View 9 Replies
View Related
Sep 12, 2012
I want to replace existing 1242s with 1262s. Which are currently in a Heated Nema Enclosures with 12dBi Mast Mount AIR-ANT24120. The 5.0 Ghz Radio is off. So the question is can I use the same Antennas AIR-ANT24120 for the new 1262? I’m assuming yes as long I use connectors A & C are tx/rx; on the center would we leave open or put a rubber duck on it?
View 3 Replies
View Related
May 15, 2012
My issue occurs on ALL of my home computers (MacBook and iMac using wi-fi) and ALL of my browsers (Safari, Firefox, Chrome).The problem:- Security Certificates: They pop up daily for Facebook mostly, but also Twitter. I will click Continue, which takes me to...- 404 Error/Page Not Found Error: After the Certificate error mentioned above, this happens. Mostly to YouTube. It will stay like this for a few hours. I've cleared cache, rebooted, etc. etc. Nothing works.- Images turn into little blue boxes with a question mark in them. **When this happens, it's an indication that a Certificate box will pop up out of the blue.- Even on Google.com, it will say: Invalid URLThe requested URL "/", is invalid.Reference #9.df260e6b.1336506889.420cf4fSo what can I do? It happens on both my Macbook Pro and iMac - both connected wirelessly to a Linksys router/cable modem. The router is Wireless-N Broadband Router WRT160Nv3 with Firmware Version: v3.0.02.
View 1 Replies
View Related
Nov 24, 2011
I am directly plugged into the router on my computer, and it is used wireless for the rest of the computers in the house. Frequently (3-4 times a day usually, sometimes more like every 20 mins, other days not at all), the router and Network Magic will tell me my computer has lost internet connection, and browsers and any program I try to start won't be able to connect to the internet. However, I know the connection is still live because any program that was running and accessing the internet beforehand (multi player games and instant messaging programs, for example) still run fine with their connection and I can continue to play or chat online until I close that program.
Trying the 'Repair Connection' on network magic doesn't work, but unplugging and replugging the power cable to the router fixes the issue(again, so I know it's the router and not the internet)whatever reason the router is deciding to tell me it's not active and refuse access to the internet for new programs when existing connections don't show any problems.
View 3 Replies
View Related
Mar 14, 2011
what's the best antenna arrangement for wall mounting the WAP4410N?I see pictures of the antennas for desk mount but nothing for a wall or ceiling mount.Should I just fiddle with them and see what works best?
View 3 Replies
View Related
Jan 10, 2013
I have a question if your Cisco 800 series wireless in a rack mount installation in racks to place the signal strength materials very well ?
View 0 Replies
View Related
Feb 27, 2013
Is there a replacement rackmount kit available for a Smart Switch SF200-48?
View 1 Replies
View Related
Mar 1, 2011
I have been using DD-WRT firmware on my Linksys WRT160v3 for more than a year. I never used a PPPoE internet connection on my router. So, I don't know if I'm doing anything wrong which causes me "NO INTERNET CONNECTION". It seems to me that the router itself can connect to the internet. But, I cannot get any internet on my pc or wirless device (neither on LAN or WiFi). I tried sharing the internet through my laptop using connectify-me. And, I was able to share my internet to my mobile devices (WiFi) without any problem.
[URL]
View 2 Replies
View Related
Dec 11, 2011
I got a spare WAG160N lying around which I want to test to see if I can get a better range with it than my current router.My internet is connected via a cable modem which I connect to the ethernet port 1 on the WAG160N - which in my experience with other wireless routers - will work and broadcasts internet through wifi. However I can't seem to get it to work.After doing a bit of searching I found that some people say this isn't possible on the WAG160N while others say it's possible if I switch the port 1 to "Use as WAN port" in the ethernet setting tab page (Tried it, still doesn't work). I can obviously connect to the router setting page but no internet is flowing through (And the internet LED does not light up)
What settings do I need to use to make this work or is it indeed impossible? It's in bridge mode only at the moment with other settings untouched from factory defaults.One person says it's possible but I can only get it to work with 1 device because it's assigning the public IP on the cable modem onto the one device - but I couldn't get this to work either.
View 3 Replies
View Related
Jun 26, 2011
I recently purchased an E3200 and have successfully setup a USB printer from my desktop machine. However, I can't seem to figure out how to access that same printer through my laptop. The laptop is able to connect to the internet and the appropriate printer drivers were previously loaded.
View 3 Replies
View Related
Jan 2, 2013
Usb modem to router cisco linksys e900 how to share internet
View 1 Replies
View Related
Feb 16, 2012
I have a Maxtor 160Gb external HDD and want to use it as a network drive.So I go to the routers login page and choose for storage to set it up. I did this once and because I wanted to change a few things I deleted the share and changed the users and usergroup that I've made.Now I can't created a share anymore, also tried another disk(flashdrive) nothing seems to work.The only thing I didn't do is reset to factory default, but that's the last thing I want to do.I use the E3000 router with firmware 1.0.04
View 2 Replies
View Related
May 4, 2013
I replaced a WRT54G with an E2500. The wired PC is running XP SP3, the wireless PCs are (1) Win 7 and (1) XP SP3. Print sharing works fine, but all file shares on the "host" PC are failing. I ran "net share" and turned off all shared directories on the "host" and the same on the wireless PCs, then rebooted all. The Win7 PC sees the single directory I set up to share, but when I try to open it, I get a message that the directory is inaccessible (possibly because of permissions) and that "There is not enough server storage available to process the command".Wireless XP PC gives the same error, but can access the printer, and sees the directory share on the "host".
View 2 Replies
View Related
Jun 1, 2011
I have a 3G USB modem connected to my desktop and I would like to share the internet connection to other devices wirelessly using the WAG120n ADSL router. How do I set up the IP's manually on the router and my PC to do this? And which other setting do I need to set?
View 1 Replies
View Related
Dec 27, 2011
Just bought router and installed. I cannot create share in Storage settings in Advanced settings. I hit Create Share and it brings up the dialog box where I enter the display name. Share entire partition is checked already. I save settings and I see the box going to the form where you assign the Group roles, but then the box disappears and closes. All I see is the original Storage setting page with the Create Share button still there.I tried this on Win 7 using both IE8 and Chrome browsers.
View 4 Replies
View Related
Jun 23, 2012
I have got a Cisco EA4500 recently installed and it's great. I was very excited about the USB part as I attached a WD hdd to share the media. All good apart for two issues for which I can't seem to find a solution:
1. Transfer speed: Playing a movie over wi fi from the attached HDD works fine. However, if I try to copy the avi file from my mac to the attached hdd or vice versa the transfer speed is around 1 - 2 Mb / sec. How I can improve the speed?
2. Can't write files on the HTF+ partition
My hdd has two partitions: 1 x NTFS and 1 x HTF+.When I try to copy a movie from my mac through the Wi Fi on the HDD it would not let me on the HTF+ partition although I logged it as an Admin. I say I don't have the priviledges. However, on the NTFS partition works fine. Full r/w priviledges seem to work only on NTFS. Is there an issue with mac partitions?
View 2 Replies
View Related
