Cisco Switches :: Replacement Rack-mount Kit Available For Smart Switch SF200-48
Feb 27, 2013Is there a replacement rackmount kit available for a Smart Switch SF200-48?
View 1 Replies
ADVERTISEMENT
Cisco Switches :: Rack Mount Kit For SRW208P?
Dec 5, 2012anybody with 2 x rack mount kits for a SRW208P that they don't want? I need to rack mount these devices but my predecessor very wisely decided to throw them out and Cisco does not sell the racks as a separate SKU.
View 1 Replies View RelatedCisco Switches :: No Command Line Interface On SF200 Small Business Smart Switches?
Sep 20, 2012we just received 5 new SF200-48 Smart Switches for small business. I noticed only way I can configure them is by using the web gui. Is there a way to enable good old CLI?
View 6 Replies View RelatedCisco Switching/Routing :: 800 - Wireless In A Rack Mount Installation
Jan 10, 2013I have a question if your Cisco 800 series wireless in a rack mount installation in racks to place the signal strength materials very well ?
View 0 Replies View RelatedCisco Switches :: SF100 24 Switch Come With Brackets To Rack Mounted
Jul 26, 2012Simple question, does the SF100-24 switch come with the brackets to rack mount it on a standard 19" rack?
View 1 Replies View RelatedCisco Switches :: SR2024C / Lost Rack Brackets For Switch In Recent Move?
Sep 17, 2011I lost the rack brackets for my switch in a recent move. Where can I get more?
View 1 Replies View RelatedCisco Switches :: Mac Filtering On 8-Port SG 200-08 Smart Switch?
Apr 25, 2013Is this smart switch possible to do Mac Filtering? how to enable mac filtering on this device?
View 1 Replies View RelatedCisco Switches :: Series 200 Smart Switch Not Communicating - DHCP Blocked
May 29, 2011I have a small, simple small business network. There are 2 switches - an 8-port switch connected to my main Windows server (which is the DHCP provider for the network), and a 24-port switch which is plugged into the 8-port switch.
I replaced these switches (Dell unmanaged switches) with the Cisco 200 series smart switches (the 8-port and 26-port models). When I plug the 26-port switch into the 8-port switch, it is unable to get its DHCP address from the Windows server. Also, any device plugged into the 26-port switch cannot communicate with any other device, and all of the ethernet port lights flash at the same time at the same frequency - quite a light show!
If I plug the Windows server DIRECTLY into the 26-port switch it receives a DHCP address.
I have tried a 2nd Cisco 26-port swtich and it does the same thing, so I assume it is not a hardware issue.
Cisco Switches :: Difference Between SF200 And SF200E?
Oct 29, 2012I wonder what is the difference between SF200 and SF200E smart switch. They seem like having same spec.
View 2 Replies View RelatedCisco Switches :: SF200 Port Mapping Function
Mar 14, 2013i was able to configure (via SF200 web interface) a port mapping from port FE17 to FE7.i have supressed this port mapping.
when i try to reconfigure a port mapping from port FE17 to FE3. The SF200 web interface crash. the SF200 seems to reboot.
i have updated the SF200 firmware from V1.1.2.0 to V1.1.2.9.44.when i was able to configure (via SF200 web interface) a port mapping from port FE17 to FE7.But after having suppressed this port mapping again, i was not able to reconfigure a new port mapping from port FE1 to FE3 (the SF200 hangs).
Cisco Switches :: SF200 CAT6 Cable Incompatibility?
Feb 15, 2012I want to make an offer for a public tender for SF200 Switches (P/Ns SLM224GT and SLM248GT). The end user is already using Cat 6 cables and someone from the committee told that these Switches does not support Cat 6 cables and that the SLM224GT doesn't work correctly with an existing SG200 (SLM2008T) switch.
View 1 Replies View RelatedCisco Switches :: Management HTTPS Session To SF200-24 Suddenly Timeout
May 6, 2013what would be causing my management HTTPS session to a SF200-24 to suddenly timeout? I receive "The session has been timed out. You may log in again" few mins after logging into to switch.Sometime it happens within 45seconds, other times after 3mins, timouts are not consistent. And, i was not idle when it timed-out. My HTTPs idle time-out is set for 10mins.
I had a continuous PING going to managment IP, and it did not drop any pings when session timed-out.Interface stats are also clean. I tried IE, FireFox, Chrome and all are timming out.
I've changed the HTTP default idle-time out from 1 to 10 and my HTTPs stopped timing out. Management Access Authentication is cleary set for HTTPs, and the Idle-timeout for HTTPs was set for 10mins since install. Yet, adjusting the HTTP idle-timeout cleared the issue.
Cisco Switches :: SF200 Witches Will Simply Freeze / Blocking All Traffic Flow
Mar 18, 2013We have been deploying Cisco SF200-24P switches for our systems for over a year now. They connect to a Cisco 881 router. In many cases we are also deploying Cisco AP541s.Over the last few months, on an intermittent basis, the switches will simply freeze, blocking all traffic flow. The power LED also goes dark. It appears the switch has frozen. The only thing that seems to revive the switch is a hard reboot by pulling the power cord. In the last couple of weeks, one site in particular has gone down a handful of times. That client of our is fed up. Our patience is running thin too.
I cannot see any indications in the logs to any event that might give a clue as to the problem. We definitely see this problem with the 1.2.7.76 firmware and the 1.2.9.44 (latest as of typing this). Not sure if with earlier 1.1.2 firmware.Without a fix, we likely will have to change switches and possibly vendors as we need a reliable switch.I see some vague references to a similar problem. And one reference to a SG300 series having what sounds like the same issue.
Cisco Switching/Routing :: 3048 Rack Switch For Data Center
Jan 11, 2012Any recommendations for top of rack switch for within our data centre.Dual power is a requirement, but bandwidth and through put will not be huge as such I have been looking atthe WS-C3560X-48T-L and the Nexus 3048.
View 1 Replies View RelatedCisco Switching/Routing :: Connect SF200-48 Switch Via Mini-GBIC MGBLX1 Fiber Module To 3750?
Jun 25, 2012I am trying to connect a SF200-48 switch via Mini-GBIC MGBLX1 fibre module to a Cisco 3750 switch with a GLC-SX-MM fibre module installed both running a 1000 Mbps. When connected together they do not enable. Are there compatibility restrictions or is it that the Mini-GBIC modules cannot be used to uplink to a LAN?
View 2 Replies View RelatedSG300-10MP / Fiber From Home Office Switch To Equipment Rack?
Nov 10, 2011I just installed a 10 port Cisco SG300-10MP in my office, 9 of the ports are already in use. Connected to it are
PC
Laptop
Notebook
WIFI AP
B&W laser printer
Color inkjet printer
IP camera
Squeezebox SB3
Cat5e connection to basement HP 1810G-24 switch All of these devices are connected via a single Cat5e cable that was installed when the house was built. I had to re-terminate both ends of it when I moved in because the existing terminations were done very poorly. I have no idea how or where the cable is routed, nor what the quality of this Cat5e cable is. It did pass a test using my cable tester.
This single Cat5e is connected to my main HP switch in the basement equipment rack. Both of these switches have mini-GBIC ports that can utilize SFP transceivers and fiber. I priced out 2 MGBSX1 compatible modules along with a 30M multimode fiber patch 'cable' online at under $150. Although it would require at least a couple hours of work (including digging around in the attic and crawl space and drilling some holes), but running the fiber to the basement is very doable.
My question to my far more experienced forum members is if the performance gains would be worth the effort?My server is in the basement, and despite having an Intel GB NIC in my PC I am seeing read speeds of ~23MBs and writes of ~49MBs to/from my it. My server has teamed GB NICs (802.3ad LACP Layer 2) connected to trunked (LACP) ports on my HP switch.
Cisco Infrastructure :: Finding Replacement For Switch C4006?
Oct 3, 2012Right Now we are using Cisco switch model c4006.and we are looking to replacement for the same . Below are our requirements.
1: Around 120 Ports (100 Mbps)
2: Around 30 Ports (1Giga)
3: Layer2/Layer3
HP ProCurve 2520 - Network Switch Replacement
May 1, 2013we're running some HP ProCurve 2520's (24 port PoE for desktops/phones) and 2510's for our server racks. The CPU's are a bit weak from what we can tell and sometimes end up with issues on them. The specs on the EAS series look like a decent jump compared to the older HP's. However I've never worked with these ever.
My other option is to go back to Cisco. However to make it fit our budget, we have to dump gig switches for 10/100 + PoE. Which isn't really a major issue on the desktop switches. We'll naturally put gig versions on the server racks. I like our ProCurves, however they cause issues from time to time.
I've also considered going back to Adtran, however I haven't kept up with what they have to offer. I'm tempted to play it safe and go the Cisco route. We're using ASA5510's active/passive for routing/firewall (gig versions).
Cisco Switches :: Reconfigure Port Mirroring From Port FE17 To FE3 / SF200 Web Interface Crash
Mar 14, 2013i was able to configure (via SF200 web interface) a port mirroring from port FE17 to FE7.i have supressed this port mirroring.when i try to reconfigure a port mirroring from port FE17 to FE3. The SF200 web interface crash. the SF200 seems to reboot.
i have updated the SF200 firmware from V1.1.2.0 to V1.1.2.9.44 when i was able to configure (via SF200 web interface) a port mirroring from port FE17 to FE7.But after having suppressed this port mirroring again, i was not able to reconfigure a new port mirroring from port FE1 to FE3 (the SF200 hangs).
i have also tried to return to default factory setting but this does not solve the issue.i am working on SF200-24P
Cisco Switching/Routing :: Recommendations For A 3508-XL Fiber Switch Replacement
May 22, 2013This is an easy question for all the architechs and designers out there. I have a stack of 3508-XL switches and one of them failed. we have 2 spares but hese are more than 10 years old and have reaced EoL.What is the equivalent switch of a 3508-xl replacement today?
View 11 Replies View RelatedCisco Switching/Routing :: Obtain Replacement Rackmount Kit For 2960 48 Port Switch?
Dec 1, 2012Is it possible to obtain a replacement rackmount kit for a 2960 48 port switch? I've had a read of the manuals but can't see a part number specified. The part number suggested to me (by BT) is for the 8 port version, which is not much use.
View 2 Replies View RelatedCisco WAN :: Interface Netgear Smart Switch To 881 LAN Port
Dec 16, 2012we have 100 Cisco 881 routers in our network and they all work fine to Linksys, 3Com, etc switches. The problem we have encountered is interfacing to Netgear switches. Netgear switches use autosensing on their ports and it does not seem to be compatible with MDIX autosensing on the Cisco 881 4 port LAN hub that is standard on the 881 router. Would a cross over cable resolve the problem? Since both run autosensing MDIX they never synch - so likely a cross over would not do much. I see this with all types of Netgear smartswitches. If you put a small switch between the Netgear switch and the 881 Cisco router everything works fine except for getting port 9000 traffic through.
View 5 Replies View RelatedCisco Switches :: SG200 Apply The Smart Port Macro To Interface
May 23, 2012I´m a IOS CLI fanatic. Its the first tiem that I have to configure a SB switch. Its very confusing, I want setup a voice vlan id as 200. but I don see that this value change when I try to apply the smartport macro to the interface.Its possible change a smartport macro?
View 1 Replies View RelatedCabling / Cards :: Cisco Series 200 Smart Switch Not Communicating - DHCP Blocked
May 30, 2011I have a small, simple small business network. There are 2 switches - an 8-port switch connected to my main Windows server (which is the DHCP provider for the network), and a 24-port switch which is plugged into the 8-port switch.
I replaced these switches (Dell unmanaged switches) with the Cisco 200 series smart switches (the 8-port and 26-port models). When I plug the 26-port switch into the 8-port switch, it is unable to get its DHCP address from the Windows server. Also, any device plugged into the 26-port switch cannot communicate with any other device, and all of the ethernet port lights flash at the same time at the same frequency - quite a light show!
If I plug the Windows server DIRECTLY into the 26-port switch it receives a DHCP address.
I have tried a 2nd Cisco 26-port swtich and it does the same thing, so I assume it is not a hardware issue.
NETGEAR GS108E - Smart / Managed Switches That Allow Outbound From Mirror Port?
Nov 12, 2012I'm searching for a managed switch that allows me to not only mirror a port/ports, but also to still use the destination port for the mirrors as a link to the internet/the rest of the network. Aside from this, I still need the VLAN functionality of good switches, and ideally PoE provided, too.
I have seen the majority of the features of this in the NETGEAR GS108E (http:url...), but this doesn't provide PoE to the ports and also requires Windows to log into.Is this a feature of many switches? I can think of many snooping applications where it would be incredibly useful.
Cisco Wireless :: 3502e APs - How To Mount Antenna
Mar 22, 2013I am still new to wireless. I have been studing for my CCNA Wireless for about 6 months now so I still have a lot of questions.
Right now I have to deploy some new APs. We are using 3502e APs. I have a qustion on how to mount antennas for these access points. I have to make a mounting bracket the new installations. What was done with the previous APs was to mount a unistrut beam to an I beam in the building. There is 2 AIR-ANT-1728's and 2 AIR-ANT-5160V-R antennas mounted straight out on the unistrut. Then they put a T bracket on the unistrut and mounted a second bar 90 degrees from the main bar and connected the third 1728 and 5160 antennas on the second mounting bracket. So we have 4 antennas in a row, and two off to the side 90 degrees from the other 4 antennas.
My question, is this OK to have them this way, or would it be better to have all 6 antennas in a straight line when I fabricate my new AP brackets?
Here is a picture of what I am talking about. This would be looking at it from above.
Current New Proposal
__________o__o__o__o_ _________o__o__o__o__o__o
| AP AP
|
|o
|
|o
Cisco Aironet AP 1231G Mount With Magnet
Nov 22, 2011I need to install a AIR-AP1231G in one of our facilities. Its desired location is on a 1" thick solid steal wall filled with concrete. I thought maybe mounting it with a magnet would be easier than tap and die. Any reason I shouldn't use a high powered magnet to mount it with?
View 3 Replies View RelatedCisco Switching/Routing :: Possible To Connect SF200-48 To 300Series At 1G Speed Over Ethernet
Jan 15, 2013I have in my office switch Cisco Small business series SG300 with 50 x 1G ethernet ports. Now I wanna enlarge my network. I want to buy Cisco SF200-48 with 2 x combo Gigabit SFP . My question: is it possible to connect SF200-48 to 300Series at 1G speed over ethernet? Can I use ethernet port on combo Gigabit SFP on SF200 like uplink and connect it to any port in 300Series?
View 1 Replies View RelatedD-Link DCS-942L :: How To Mount In Window
Dec 13, 2011Any replacement bracket or some other way to easily mount the 942l in a window? i have a long window next to my front door i want to just stick this someone about shoulder high in that window looking right to the door so will see anyone who comes.
View 5 Replies View RelatedCisco Wireless :: Wall Mount Bracket For AIR-ANT5160V-R?
Apr 26, 2012I am looking for a wall mount bracket reference, for these 2 models of antennas :
- AIR-ANT5160V-R
- AIR-ANT2506
Something like that :I was not able to find any reference in cisco product list.
Cisco Wireless :: 12dBi Mast Mount On 1262 AP
Sep 12, 2012I want to replace existing 1242s with 1262s. Which are currently in a Heated Nema Enclosures with 12dBi Mast Mount AIR-ANT24120. The 5.0 Ghz Radio is off. So the question is can I use the same Antennas AIR-ANT24120 for the new 1262? I’m assuming yes as long I use connectors A & C are tx/rx; on the center would we leave open or put a rubber duck on it?
View 3 Replies View RelatedCisco Switching/Routing :: SG300-28P And SF200-24P Connected Via LAG Group / Configurations Won't Save
Dec 10, 2012I have a SG300-28P and a SF200-24P connected via LAG Group. SG300 routes. I also have 2 VC240 IP Cameras. They are connected on ports 18 and 19 on the SF300. If I lose power, reboot or anything that makes the switches restart, the configuration is not saved. I know this by the fact that after a reboot, ports 18 and 19 are placed in VLAN 4 Untagged. If I put them back in VLAN 2 Untagged, save the configuration and reboot, they are placed back in VLAN 4 Untagged.
I read something on here about firmware the other night from my iPad so today, I upgraded both switches to the latest firmware, 1.2.7.76. After the update, I could not access the IP Cams. I went back into the configuration and they were in VLAN 4 Untagged. I once again put them in VLAN 2 Untagged, saved the configuration and rebooted. They went back to VLAN 4UP.
There was previous discussion also about xml version of files or something and that a factory reset and setting the switch up from scratch would take care of it. I cannot do this, I am a seed corn salesman. Is there a simpler way? Like saving the config to TFTP and then uploading it after factory reset? There is LLDP settings for my IP Phones too that if I lost them, I would have no idea how to regenerate them to make my switch work again. Cisco tech support had issues with it when I first got them and they set it up via remote session so I am lost beyond this. I just know that I cannot keep going into the switches to change settings and not have them saved. I lose my security cameras and video recording.
D-Link DIR-825 :: Router Wall Mount Stuck
Jan 20, 2012I mounted the router to the wall with the 2 screw holes and screws. Now I want to take it off from the wall, but it is stuck
View 4 Replies View Related