Is there a Security Plus trial license available for the ASA 5500 series? I currently have one sitting around that I would like to use for testing, but it only has the base license.
View 2 Replieswe just got brand new 3560X with LANBASE license installed. Wanted to confirm with a "show license"
To my surprice (output below) I hav IP Services evaluation. I tried to test with an "show ip route" and "ip route..." in configuration mode with no success. How do I use the trial license?
Switch#show license
Index 1 Feature: ipservices
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Priority: None
[Code]...
I have two ASA 5510 with Security Plus license and Shared SSL VPN licensing enabled.
The problem is that the client get “Session could not be established: session limit of 25 reached” but ther is only 6 ssl vpn user connected with AnyConnect.The software on the firewall’s is 8.2(1)Is there any BUG in this software related to this problem?
I am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?
View 1 Replies View RelatedI purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
Is it required for the 3des license upgrade for the asa5510 to reboot for the further configuration of site2site tunnels.
View 1 Replies View RelatedI bought a 5500 series ASA and SecPlus license for example. Suddenly my ASA hardware got broken and changed for a new one. What about my old license? How i could activate this license on new ASA?
View 2 Replies View RelatedI have a 2 X 4510E switch with dual sup-7E running as the core switches of my company. we would like to enable BGP on these switches, according to cisco released datasheet IPBase license does NOT support BGP. When i typed question mark, BGP commands did show up. I just wonder does BGP really works on this image/license or we need to upgrade to ent license?
View 1 Replies View RelatedWe are working with a contractor to upgrade our network, and I heard from them that the 5596/5548 might not need the Layer 3 module for our inter-VLAN routhing. They have yet to give me an answer.
We do have a few static routes on our current layer-3, core switch too.
I have a customer who accedentally got a AIR-LAP-1141. He needs it to be autonomous. If I convert from LWAP to Autonomous, will there be a licensing issue?
View 1 Replies View RelatedCurrently we have a CISCO 3020 VPN Concentrator to terminate Lan-to-Lan tunnels and have our mobile workers connect via CISCO VPN client (300 users-employees and contractors-). Since this device is coming to an EOL this year we purchased a CISCO 5520 (below are the current licenses on it)
The licensing seems rather complicated, therefore this is my question:
- What VPN solution do you recommend for our users and contractors? it is my understanding the CISCO VPN client does not work with ASA 5500 series devices
- Is there a license needed to deploy VPN solutions for our remote users(employees/contractors)?
what license do I need to create a IPSEC tunnel? I have an ASR 1001, running? [code]
View 2 Replies View RelatedWhat's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedBasically, I downloaded a trial and it eventually expired but I heard something like, if you format your hard drive and re-install your operating system you can download and use the trial again. Does this work? And are there any other easier ways to do it
View 3 Replies View RelatedA client of mine has an RV042 and wanted a trial of the ProtectLink Web content filtering. The trial has expired but the RV042 is still blocking websites such as Facebook. They have requested a user to have access but I can no longer modify the ProtectLink settings.
View 1 Replies View RelatedI have one firewall need to be configured in transparent mode. I have inside and outside router. What is the configuration of transparent firewall ASA8.2. I didn't find the configuration on Cisco site.
View 17 Replies View RelatedCan any ASA 5500 in particular the ASA5510 firewall support jumbo frames (i.e. greater than the default standard 1500 Bytes frames)?. I plan to use the ASAs to setup a point-to-point IPSec tunnel and need an Application frame of 4Kbytes intact and not segment it.I have done little checking on the Cisco Website and see it mention of Jumbo frames on the 5580 on 10Gig interface but didn't see mention 5510. 5580s are way over-kill and expensive for what I need is to run a mission critical one IPSec point-to-point with maximum of no more than 100Kbps so 5510 is perfect for me but not sure if it can carry the jumbo frame?
On the routers and switches it's the MTU settings and they are configurable per interface and I am OK and the circuit is T1 which the Telcos said it's OK since it's physical layer so the only unkown is the firewall.
I am very confused on how I setup a Pix 515 that I just got to route traffic out a cable modem. First, let me give you a little details on my current network setup and what I am trying to accomplish with this Pix 515. Currently all my users go out the proxy for any internet access, however I have certain users that need to go out the cable modem instead of the proxy server. Below is an example of the current IP setup of a user A:The cable modem that we currently have has DHCP so I would need the external PIX address to accept a DHCP address. I also don't really understand what else I need to setup so if I have say four users hitting the cable modem through the pix how do I direct their web traffic to the correct computer (NAT ?),I will be plugging the PIX into a cisco switch that all ports are in VLAN 48 so hopefully a static internal address on the pix of 10.24.48.254 will keep me from having to do any routes since all traffic will be originating from the 10.24.48.0 network.
View 1 Replies View RelatedWe have purchased a new Websense 10000 Appliance and I'm not a hundred percent how to set this up. I see that URL Filtering is a possibility and WCCP, which way to move forward on implementing this?
View 4 Replies View RelatedI am trying to set up my Cisco 520 router with a firewall that will: Allow port 80 traffic to the vlan 20,Block all other incomming ports to vlan 20 (unless initalised from inside),Allow all outgoing ports on vlan 20,Block all access from vlan 20 to vlan 10 (unless initalised from vlan 10)
View 35 Replies View RelatedI'm in the process of migrating a rather big NAT configuration from a customer running pre 8.2 ASA software.The customer has 2 Dynamic Policy NAT configured which have overlapping source addressesOther Dynamic Policy NAT has the destination address of "any"
Other Dynamic Policy NAT has a single host address as destination address towards InternetThe Dynamic Policy NAT configured with the "any" destination is applied to all translations for the source host towards Internet
What I'm interested in is the following
Since both NAT statements are equal in a sense (because they are of same type) what is the next deciding factor for ASA decides which translation rule to use?
Does the "nat_id" parameter define which rule is checked first? Is the NAT rule with the lowest "nat_id" value used regardless what the order of the NAT rules is when you check them on the CLI? (with "show run global" and "show run nat")I'm just interested on how the NAT operates in this case, even though were generally using 8.4 at the moment.
I upgraded my ASA 5520 with the latest image. Now I get an error upon launching ASDM.Your ASA image has a version number 7.2(4) which is not supported by ASDM 6.4(1), use Device Manager version 5.2(x)Continue Anyway?
What are the newest, recomended image versions of ASA and ASDM I should be using?I will also be using the SSM-20 module with this setup, so I would like to stay with a working version of ASDM.
I have a problem with the configuration of the ACL of my ASA 5505 router.However, the syntax seems okay,access-list 121 extended deny icmp 192.168.0.0 255.255.255.0 .
View 3 Replies View RelatedI am looking into buying an ASA5505 but I would like to know if it is going to work in my setup. I have an Internet connection and 2 seperate networks. I know that the ASA5505 has 8 ports and I would like to know if I can assign each port to a different network zone? I dont want to use VLAN but physical networks. I know it is possible with ASA5510 and above but I want to make sure I can do the same with a ASA5505 (Without the security upgrade). I want to get an ASA5505 unlimited users.
So an Internet connection (with multiple IPs), 2 seperate networks, I want to filter traffic between all 3 and route between them also.
i have to open ports for vedio conferencing in my Firewall configuration ,
View 1 Replies View RelatedI am looking at upgrading an HA pair of ASA5520's from 8.2(2) to 8.3(1), and am just wondering why the huge upgrade in memory is needed. How are Cisco justifying where the additional memory is going to? Are there supposed to be some massive improvements in performance?
View 2 Replies View RelatedI have existing Sonic FW in my company we are moving from sonic FW to ASA 5510 Security plus lice. I have two ISP currently connected to sonic Firewall I am planning to implement Dual ISP configuration on ASA5510.
View 12 Replies View RelatedI have an ASA 5501 running latest code. Per the article at [URL], I need to open the below ports. I have 5 Xboxes (when people come over) and they all have a static IP. My network is 192.168.0.x and is a /24 network.Xbox LIVE requires the following ports to be open: Port 88 (UDP)Port 3074 (UDP and TCP)Port 53 (UDP and TCP)Port 80 (TCP)port 1863 (UDP and TCP) (Kinnect) I defined the various network ports as a service and then created 5 hosts called xbox1, 2, etc with a static IP. I dont have access from the command line (forgot telnet and ssh passwords) , so from the gui, what do I do next?
View 7 Replies View RelatedI have a 5505 configured with a active/standby dual wan setup using the sla tracked connection settings. Is there a way to configure the ASA to stay on the backup connection after activating? We had a situation where the main T1 was bouncing, so the backup connection was being activated and deactivated very often. The problem is that there is an app being used that does not allow users to reconnect to dropped connections immediately, so every time the asa switches wan connections it causes a significant disruption.I should note that I already set monitor options frequency to 240 seconds. I could set it higher, but then we have a longer delay when the main connection dies.
View 2 Replies View RelatedI have an ASA 5500 Firewall. I need to figure out how to log all events using Port 25 to determine if there are any rogue devices on our network. I was trying to figure out how to do this via the Real-Time Monitoring (filter) but have had no success.
View 1 Replies View RelatedI have an issue with a Cisco ASA 5520. It seems to block some emails incoming from some recipients. The sender's mail server clearly reports my ASA as cause of the problem (see attached image). Unfortunately I have not the logs about that event and the time frame to close this issue is very narrow.
View 5 Replies View RelatedWe have to set up voip for our network(for 50 phones not he cisco phones).
I need to just the route the voip traffic to gateway address of telephonic company(1.1.5.7) where they provide us the connectivity for the setination call.
What sort of protocols should i have to enable in pix i saw the concepts like sip, h323, ras, skinny.
We are using only voip for asa and no data or other traffic should be allowed.
inside adrees: 10.10.10.0/24 for all voip phones
outside:121.21.22.1
telephoneic gateway: 1.1.5.7
Is there a way to shut down the AUX port on the ASA?
View 1 Replies View Related