I bought a 5500 series ASA and SecPlus license for example. Suddenly my ASA hardware got broken and changed for a new one. What about my old license? How i could activate this license on new ASA?
View 2 RepliesI purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
Is there a Security Plus trial license available for the ASA 5500 series? I currently have one sitting around that I would like to use for testing, but it only has the base license.
View 2 Replies View RelatedSince the 5500X series firewalls use a software IPS SSM that is set up differently from the old ones, I am a little confused on the initial setup.
[URL]
we see a proposed setup for L3 management of the IPS
interface GigabitEthernet0/0
nameif outside security-level 0
ip address 203.0.113.1 255.255.0.0
[Code].....
Our requirement with that appliance is to do URL blocking and filtering.Are there any other options we can consider or is it SaaS only. Would have preferred Trend Micro, but don't this is possible with this appliance.Will content security be offered on the Cisco ASA 5500-X Series?At this time, content security services are not supported on the Cisco ASA 5500-X Series appliances. However, the ASA 5500-X Series Cisco Cloud Web Security ready. Cisco Cloud Web Security provides content security as a cloud-based software as a service (SaaS).
View 1 Replies View RelatedI tried looking in ASA documentations but unable to find out that how many IPSec Tunnels can be terminated to an ASA cluster. I have 5545 running only two IPSec Tunnels so far but need to terminate 18 sites all up and would like to confirm how many tunnels we could terminate? Is there a limitaion to it?
View 2 Replies View RelatedWe are retiring our current radius server. It is windows 2003 IAS server (also a DC) that we use for 802.1X authentication. We are moving to server 2008r2. I have already installed NPS and Network Authentication services on the server.
On the existing IAS server I exported the settings (using iasmig reader.exe) and was able to import the profiles (I see the 5500 as a radius client etc) Our 5500 is still pointing to the old server.
Is it as simple as changing the ip of the RADIUS server to point to the new server? It looks like I actually have to add the new server and create a new pres hared key on the NPS server but only find documents on adding a new 5500 (vs flipping it to a new NPS server).
We have the ASA firewalls in our environment - two 5510's and one 5520.Our 5510's are currently used in our production environment and the 5520 is our firewall for pre-production and support personnel. My question is about the AnyConnect VPN licenses we have. Currently we have 100 seats for AnyConnect on our production ASA's, but we'd like to see if we can move half of these to the 5520 ASA?
View 1 Replies View RelatedI bought 1921-SEC-k9 so i have security license installed: Technology Package License Information for Module:'c1900' [code] Now I'd like to know if SSL VPN comes with that license or do I need to buy additional VPN SSL license to use it? If so.. i'd just use IPsec... i need client-to-site configuration.. can you point me to tutorial or just a basic config.. because for ipsec i just find site-to-site tutorials on internet.
View 8 Replies View Relatedare there any AP models which support 5500 series and dont support 4400 series. Actually we are looking to get some new AP with higher bandwidth and External Antenna How to differentiate between AP models with clean air feature supported and not
View 5 Replies View Related: %DATACORRUPTION-1-DATAINCONSISTENCY: unterminated string in buffer of length 129, counted: 129 -Traceback= 4027CB2C 402B1E88 4052884C 40528A48 40528D08 40529188 40529358 403247E8 403247D4
Cisco Internetwork Operating System Software
IOS (tm) C5RSM Software (C5RSM-ISV-M), Version 12.2(46), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Thu 26-Apr-07 19:41 by pwade
Image text-base: 0x40010948, data-base: 0x410F41D0
[code]....
The access point is reply when I ping it from WLC. But until know it can't join, even discovery packet isn't arrive in WLC.
WLC software version = 6.0.199.4
Management interface address = 192.168.120.10 /24
Model = 5508
Access point software = 1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1) AP Model = cisco AIR-LAP1242G-E-K9 Interface address = 192.168.121.151
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedWe have ASR 1006 with IOS XE and i want to see the Software License but somehow i cant!!! ...i googled it but i could not find anything.how can i see the available license on ASR 1006 or 9000 series?
View 1 Replies View RelatedI have this version Ap "c1200-rcvk9w8-tar.124-21a.JA2" and a WLC 5500. When i connect the ap to the network i can ping from ap to wlc and the wlc to ap, but the proccess of lwapp messages give errors on the Ap when the Ap try to download the image from wlc and could not join the wlc. why this could be? this is the info of the wireless lan controller.
View 6 Replies View RelatedI understand that Cisco have at long last provided a facility to separate HTTP web authentication from HTTPS WLC management on WLC code 7.2.x for the new 5500 series WLCs.
My question is does Cisco intend to provide the same much needed functionality on the 4400 series WLCs that are running 7.0.x code? I was looking through the release notes for v7.0.235.3 code and that did not seem to mention this functionality. I know we can get around the problem by purchasing an SSL certificate so that guest users with web authentication do not have to see the same security warning each time they log in but the idea to separate the HTTP web authentication from HTTPS WLC management seems so much simpler.
I have a brand new 2901 and I'm trying to work out what licence features I have. The output of show licence shows I have ipbasek9 feature and datak9 as EvalRightToUse feature. Is BGP included in the base feature? What will happen when the datak9 evaluation period expires?
View 1 Replies View RelatedThe Release Notes for 7.0.116.0 of WLC 5500 has a table which title is "Client Type", and it shows wireless adapters. My question is,
what kind of customer means? Wireless clients or clients for an specific application? If it was the first option, does it mean tha just this adapters could connect to my wireless network?
We are working with a contractor to upgrade our network, and I heard from them that the 5596/5548 might not need the Layer 3 module for our inter-VLAN routhing. They have yet to give me an answer.
We do have a few static routes on our current layer-3, core switch too.
Can any ASA 5500 in particular the ASA5510 firewall support jumbo frames (i.e. greater than the default standard 1500 Bytes frames)?. I plan to use the ASAs to setup a point-to-point IPSec tunnel and need an Application frame of 4Kbytes intact and not segment it.I have done little checking on the Cisco Website and see it mention of Jumbo frames on the 5580 on 10Gig interface but didn't see mention 5510. 5580s are way over-kill and expensive for what I need is to run a mission critical one IPSec point-to-point with maximum of no more than 100Kbps so 5510 is perfect for me but not sure if it can carry the jumbo frame?
On the routers and switches it's the MTU settings and they are configurable per interface and I am OK and the circuit is T1 which the Telcos said it's OK since it's physical layer so the only unkown is the firewall.
I am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?
View 1 Replies View RelatedI have an 887, I'm having trouble wrapping my head around the ZBF. I would like to change it to the old style firewall, but using the CCP it says I must delete the ZBF policys first - fair enough, I deleted all the rules so the firewall looks blank, but it still doesn't want to let me change the firewall mode - saying I must remove all the policies first.
View 5 Replies View Relatedi have to open ports for vedio conferencing in my Firewall configuration ,
View 1 Replies View RelatedI have two ASA 5510 with Security Plus license and Shared SSL VPN licensing enabled.
The problem is that the client get “Session could not be established: session limit of 25 reached” but ther is only 6 ssl vpn user connected with AnyConnect.The software on the firewall’s is 8.2(1)Is there any BUG in this software related to this problem?
I am looking to change my Failover Int IPs on my PIX 515E Bundle, Cisco PIX Firewall Version 6.3(5)123 with the least impact on the network.
For example:
interface ethernet5 "state"
IP address 172.18.0.245, subnet mask 255.255.255.252
ip address state 172.18.0.245 255.255.255.252
failover ip address state 172.18.0.246
I want to change these lines to .....
interface ethernet5 "state"
IP address 172.18.0.185, subnet mask 255.255.255.252
ip address state 172.18.0.185 255.255.255.252
failover ip address state 172.18.0.186
I added a new server and created a new static NAT assignment on the ASA 5510 to the server's IP. When I browse to the web to check what public IP it's reporting, it shows the wrong IP. I disabled the network interface on the server, ran "clear xslate", reenabled the network interface, ran "sho xlate" and while the correct translation was in the table, the server still reported the wrong IP address.I even ran a packet trace and it showed the IP address being correctly translated to the proper public IP, but when I browse to the web I get the same erroneous public IP. [code]
View 8 Replies View RelatedI have 2 cisco asa 5540's configured in active/standby mode. I need to change the hostname and domain name as per our standards. Does changing the hostname has any impact on the traffic flow?
View 1 Replies View RelatedWe have 2 x ASA 5520s in active/standby and we have a block of 30 public IP's that NAT to many servers etc and we use it for our Corp VPN. We are changing ISPs soon and we will be getting a new block of public IPs where do I even start to plan the migration and how? Can I overlap somehow and do a slow migration or must I do it in one big swoop?
View 1 Replies View RelatedI have an ASA 5500 Firewall. I need to figure out how to log all events using Port 25 to determine if there are any rogue devices on our network. I was trying to figure out how to do this via the Real-Time Monitoring (filter) but have had no success.
View 1 Replies View RelatedI have an issue with a Cisco ASA 5520. It seems to block some emails incoming from some recipients. The sender's mail server clearly reports my ASA as cause of the problem (see attached image). Unfortunately I have not the logs about that event and the time frame to close this issue is very narrow.
View 5 Replies View RelatedWe have to set up voip for our network(for 50 phones not he cisco phones).
I need to just the route the voip traffic to gateway address of telephonic company(1.1.5.7) where they provide us the connectivity for the setination call.
What sort of protocols should i have to enable in pix i saw the concepts like sip, h323, ras, skinny.
We are using only voip for asa and no data or other traffic should be allowed.
inside adrees: 10.10.10.0/24 for all voip phones
outside:121.21.22.1
telephoneic gateway: 1.1.5.7
Is there a way to shut down the AUX port on the ASA?
View 1 Replies View RelatedWe are now using image 8.0(4) for my ASA 5510. Later on, I would like to upgrade the image to 8.4(3).May I have to know what difference for those images, what should I take care of the script?
View 1 Replies View Related