Cisco Switching/Routing :: Error Log On 5500 Series?
Feb 3, 2012
: %DATACORRUPTION-1-DATAINCONSISTENCY: unterminated string in buffer of length 129, counted: 129 -Traceback= 4027CB2C 402B1E88 4052884C 40528A48 40528D08 40529188 40529358 403247E8 403247D4
Cisco Internetwork Operating System Software
IOS (tm) C5RSM Software (C5RSM-ISV-M), Version 12.2(46), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Thu 26-Apr-07 19:41 by pwade
Image text-base: 0x40010948, data-base: 0x410F41D0
[code]....
View 6 Replies
ADVERTISEMENT
May 16, 2013
We are working with a contractor to upgrade our network, and I heard from them that the 5596/5548 might not need the Layer 3 module for our inter-VLAN routhing. They have yet to give me an answer.
We do have a few static routes on our current layer-3, core switch too.
View 3 Replies
View Related
Nov 15, 2011
We have the ASA firewalls in our environment - two 5510's and one 5520.Our 5510's are currently used in our production environment and the 5520 is our firewall for pre-production and support personnel. My question is about the AnyConnect VPN licenses we have. Currently we have 100 seats for AnyConnect on our production ASA's, but we'd like to see if we can move half of these to the 5520 ASA?
View 1 Replies
View Related
May 16, 2013
Since the 5500X series firewalls use a software IPS SSM that is set up differently from the old ones, I am a little confused on the initial setup.
[URL]
we see a proposed setup for L3 management of the IPS
interface GigabitEthernet0/0
nameif outside security-level 0
ip address 203.0.113.1 255.255.0.0
[Code].....
View 1 Replies
View Related
May 25, 2012
are there any AP models which support 5500 series and dont support 4400 series. Actually we are looking to get some new AP with higher bandwidth and External Antenna How to differentiate between AP models with clean air feature supported and not
View 5 Replies
View Related
Jul 23, 2012
The access point is reply when I ping it from WLC. But until know it can't join, even discovery packet isn't arrive in WLC.
WLC software version = 6.0.199.4
Management interface address = 192.168.120.10 /24
Model = 5508
Access point software = 1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1) AP Model = cisco AIR-LAP1242G-E-K9 Interface address = 192.168.121.151
View 19 Replies
View Related
Jan 20, 2013
Our requirement with that appliance is to do URL blocking and filtering.Are there any other options we can consider or is it SaaS only. Would have preferred Trend Micro, but don't this is possible with this appliance.Will content security be offered on the Cisco ASA 5500-X Series?At this time, content security services are not supported on the Cisco ASA 5500-X Series appliances. However, the ASA 5500-X Series Cisco Cloud Web Security ready. Cisco Cloud Web Security provides content security as a cloud-based software as a service (SaaS).
View 1 Replies
View Related
Nov 20, 2012
I have this version Ap "c1200-rcvk9w8-tar.124-21a.JA2" and a WLC 5500. When i connect the ap to the network i can ping from ap to wlc and the wlc to ap, but the proccess of lwapp messages give errors on the Ap when the Ap try to download the image from wlc and could not join the wlc. why this could be? this is the info of the wireless lan controller.
View 6 Replies
View Related
Aug 8, 2011
I bought a 5500 series ASA and SecPlus license for example. Suddenly my ASA hardware got broken and changed for a new one. What about my old license? How i could activate this license on new ASA?
View 2 Replies
View Related
Oct 1, 2012
I understand that Cisco have at long last provided a facility to separate HTTP web authentication from HTTPS WLC management on WLC code 7.2.x for the new 5500 series WLCs.
My question is does Cisco intend to provide the same much needed functionality on the 4400 series WLCs that are running 7.0.x code? I was looking through the release notes for v7.0.235.3 code and that did not seem to mention this functionality. I know we can get around the problem by purchasing an SSL certificate so that guest users with web authentication do not have to see the same security warning each time they log in but the idea to separate the HTTP web authentication from HTTPS WLC management seems so much simpler.
View 6 Replies
View Related
Aug 4, 2012
I tried looking in ASA documentations but unable to find out that how many IPSec Tunnels can be terminated to an ASA cluster. I have 5545 running only two IPSec Tunnels so far but need to terminate 18 sites all up and would like to confirm how many tunnels we could terminate? Is there a limitaion to it?
View 2 Replies
View Related
Mar 12, 2013
The router 1841 is connected directly to the layer switch. the network diagram is below:
Office A --> Switch (L3) --> Router 1841 --> Internet --> Office B
However, when I transfer the file from Office A to office B, the speed very slow ( only around 40 kb/second), and there are an input error and CRC error:
Cisco-R1841#sh interfaces FA0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 0019.e02f.03dd (bia 0019.e02f.03dd)
[Code]......
View 5 Replies
View Related
Jul 5, 2011
The Release Notes for 7.0.116.0 of WLC 5500 has a table which title is "Client Type", and it shows wireless adapters. My question is,
what kind of customer means? Wireless clients or clients for an specific application? If it was the first option, does it mean tha just this adapters could connect to my wireless network?
View 1 Replies
View Related
Dec 19, 2012
I have two cisco asa firewalls connected through a VPN, one is 5505 and the other is a 5510. From the 5505 I can ping the internal interface of the 5510, but not vice versa. Would that be a NAT issue? I used the ASDM to configure the VPN tunnels with the wizard for IPsec site to site.
View 3 Replies
View Related
Mar 4, 2012
I've recently installed ssl certificates for our web auth guest interface on our WLC's. I discoverd the they required a Level 2 certificae to work properly. We are getting an untrusted certicate on our 802.1x ssids that authenicate against a 5500 ASA..A certificate was insatlled and has an error, show the certificate as untrusted, my questionis, does the 5500 ASA require a level 2 certifate as well?
View 5 Replies
View Related
Apr 19, 2013
How to you setup ip routing on a Nexus 5500 I want to do vlan routing between an Nexus 5500 and Catalyst 3750. Nothing clever just have the 2 switches talk and vlans route between the two.
View 3 Replies
View Related
Jul 15, 2012
How many VMs can a pair of 5548s support? Remember, for each VM, I will have an ARP entry in the 5500 ARP Table (assume 5500 is the L3 default gateway).
View 3 Replies
View Related
Mar 17, 2012
Is there an official Cisco-Page with the always-up-to-date recommended NX-OS-Releases for the Nexus 5000, just as there is URL
If there is no such page: What Release can be recommended?
We got new N596 & N2232 this week, and are using L2-LAN only, no L3,no FCoE- or FC-Ports. The command 'vPC orphan-ports suspend' is the newest feature used, so 5.0(3)N2(1) would be the oldest possible release.
Before I install 5.1(3)N1(1a) and then have to do a distruptive downgrade to 5.0(3)N2(2b), I'd like to be assured that the new one is already recommended as mature enough.
View 1 Replies
View Related
Jul 5, 2012
I have one 5500 and about 15 Cisco 3502 APs.
The problem is that one of the clients loses the connection to the network time to time ,The error in the WLC logg is
*Dot1x_NW_MsgTask_0: Jul 06 17:42:38.934: %DOT1X-3-INVALID_WPA_KEY_MSG_STATE: 1x_eapkey.c:843 Received EAPOL-key M2 msg has invalid information when mobile is in START state - invalid secure bit; KeyLen 24, Key type 1, client 00:21:6a:af:be:70
View 4 Replies
View Related
Nov 20, 2012
Having an issue with my WLC 5500 and client connectivity. This just started today. Clients will connect for a short period of time and then drop off. WLC appears fine with the exception of a bunch of trap errors. I've rebooted the WLC but this did not clear the issue.
View 3 Replies
View Related
Jan 16, 2012
IOS we used for limiting access for a group we used configuration of snmp-server views like following
snmp-server group backupgroup v3 priv read backupview write backupview access 20 snmp-server view backupview ccCopyTable included could not find out how to achive this config in NX-OS on Nexus5500
View 2 Replies
View Related
Dec 17, 2007
how to configure the ASA 5500 with "Directed Broadcast" for Wake of lan from other networksegment. we want pass traffic from 192.168.10.0 network to 192.168.100.0 DMZ Network to turn on the server with Wake on Lan.
I read something about "Static NAT" but how do i make this one?
View 3 Replies
View Related
Jun 26, 2012
Are there any dependencies on VTP on the Nexus platforms like the 5500 or 7000? In IOS P V LAN required VTP Transparent mode however I cannot find any reference to this for the Nexus platform. Are there any other features that would require the use of VTP? By default VTP is turned off on nexus and has to be enabled with the feature command so is there any benefit to running VTP in transparent mode vs off?
View 1 Replies
View Related
May 4, 2011
There is very little and quite diverse Information regarding the if, where and how of a Nexus 5000 or 5500 series Switch and support for IEEE 802.1AE Link Layer Encryption (also called MACsec).
For example: the official FAQ denies that the Nexus 5500-series supports 802.1AE at all, while the data sheet says that only "downlink ports" are supported (host access).
On the Nexus 7000 platform the 802.1AE link layer encryption is part of TrustSec (feature cts) and much better documented.
The Question is: If and under which circumstances (configuration, L3 modules, license, NX/OS version) does a Nexus 5k or 5500 series Switch support 802.1AE on 1G or 10G interfaces that are directly connected to a Nexus 7000 (with the necessary cts feature licensed/configured)?
View 2 Replies
View Related
May 7, 2013
We have successfully peered two 5548UP switches together and separately we have successfully peered two 5596UP switches together. Works great and is our standard going forward for data center switching. I've been casting about Google and Cisco looking for an answer to this question:
Is it possible to have more than two 5500 class Nexus switches participate in a peered vPC configuration? For instance, can I connect a single FEX to four 5500 class switches in a vPC configuration? The question is more academic than actionable. Even if the answer is yes we probably wouldn't be in a position to implement something like this for a while.
View 3 Replies
View Related
Sep 12, 2012
I am getting this error on our Cisco 5500 switch. What it means
2012 Sep 13 14:49:37 PDT -07:00 %SPANTREE-2-RX_1QNONTRUNK: Rcved 1Q-BPDU on non-trunk port 3/20 vlan 72
2012 Sep 13 14:49:37 PDT -07:00 %SPANTREE-2-RX_1QPVIDERR: Rcved pvid_inc BPDU on 1Q port 3/20 vlan 72
2012 Sep 13 14:49:37 PDT -07:00 %SPANTREE-2-RX_BLKPORTPVID: Block 3/20 on rcving vlan 72 for inc peer vlan 235
2012 Sep 13 14:49:37 PDT -07:00 %SPANTREE-2-PORTUNBLK: Unblock previously inc port 3/20 on VLAN 72
View 3 Replies
View Related
Jan 8, 2013
Does the Nexus 5548/5596 switch support OSPF ECMP?
Also on OSPF and ECMP, the load-balancing method at the multiple links for Catalyst 3750 is per IP packet or per destination IP?
View 2 Replies
View Related
Nov 24, 2012
I am experiencing inconsistent echo-replay from devices connected via VPC to Nexus 5500s while pinging from the Nexus exec prompt.
In some cases I receive normal response when pinging from one Nexus, but no response when pinging from the other switch. In other instance I receive normal response to one Nexus, and duplicate replays to the other. It looks like a VPC related bug. NXOS is 5.1.3.N2.1
5501# ping 10.12.12.232
PING 10.12.12.232 (10.12.12.232): 56 data bytes
64 bytes from 10.12.12.232: icmp_seq=0 ttl=253 time=8.585 ms
64 bytes from 10.12.12.232: icmp_seq=0 ttl=254 time=9.227 ms (DUP!)
64 bytes from 10.12.12.232: icmp_seq=1 ttl=253 time=1.011 ms
64 bytes from 10.12.12.232: icmp_seq=2 ttl=253 time=8.097 ms
64 bytes from 10.12.12.232: icmp_seq=2 ttl=254 time=9.429 ms (DUP!)
64 bytes from 10.12.12.232: icmp_seq=3 ttl=253 time=18.195 ms
64 bytes from 10.12.12.232: icmp_seq=4 ttl=253 time=8.807 ms(code)
View 5 Replies
View Related
Jan 24, 2013
For intervlan routing, Is 'IP routing' command enabled by default on a 6500 series switches based on the IOS?and on 3750 switches, do we need to enable the "ip routing" command manually for intervlan routing?
View 1 Replies
View Related
Mar 19, 2013
I have peculiar challenge ahead of me and would like to get new perspectives.
The objective is to route specific VLAN traffic and the caveat is that I have multiple VLANs with the same network address.
For example:
VLAN100 10.10.10.0/28 VLAN101 10.10.11.0/28 VLAN102 10.10.12.0/28
VLAN103 10.10.12.0/28
VLAN104 10.10.11.0/28
I need traffic going from VLAN100 with a destination of 10.10.11.0 forwarded to VLAN101 and NOT VLAN104.
This task is currently being completed by a multi context firewall and we're trying to decommission the asset.
View 5 Replies
View Related
Oct 30, 2011
For intervlan routing, Is 'IP routing' command enabled by default on a 6500 series switches based on the IOS?hes, do we need to enable the "ip routing" command manually for intervlan routing?
View 2 Replies
View Related
Jul 28, 2012
Nexus 5500 support auto negotiation on 1gig sfp port? There is an end device that only support auto negotiation and cannot be manually set speed/duplex.
View 0 Replies
View Related
Jan 20, 2013
I have a Nexus 5500 which is the core of our network and we have access layer switches uplinked to it. I know by default the qos markings will be trusted.
1. On a trunk uplink from an access layer switch to the Nexus, I have "mls qos trust dscp". Will the DSCP marking be preserved when it reaches the Nexus?
2. How do I do prioritization of voice traffic on an uplink on Nexus based on DSCP EF?
View 3 Replies
View Related
