Cisco Firewall :: ASA 5501 - Need To Open Required Ports
Nov 27, 2011
I have an ASA 5501 running latest code. Per the article at [URL], I need to open the below ports. I have 5 Xboxes (when people come over) and they all have a static IP. My network is 192.168.0.x and is a /24 network.Xbox LIVE requires the following ports to be open: Port 88 (UDP)Port 3074 (UDP and TCP)Port 53 (UDP and TCP)Port 80 (TCP)port 1863 (UDP and TCP) (Kinnect) I defined the various network ports as a service and then created 5 hosts called xbox1, 2, etc with a static IP. I dont have access from the command line (forgot telnet and ssh passwords) , so from the gui, what do I do next?
View 7 Replies
ADVERTISEMENT
Apr 18, 2012
We have setup new ip camera system and as per our vendor to access the camera from outside we need to open,TCP ports and in firewall and forward to our camera server.
Let say our public ip address is 207.114.111.22 and our local ip address for the camera is 11.11.1.30. We have cisco asa 5510.
View 2 Replies
View Related
Dec 1, 2011
I just finished implementing a VOIP install and I am trying to setup some softphones and in order to allow the softphones to work I need to open some specific ports for outbound. I am not a Cisco guy, I am a Windows Administrator that also has to maintain my Cisco infrastructure.
View 3 Replies
View Related
May 9, 2013
I have an ASA 5505 with ASA version 7.2(2) and ASDM version 5.2(2) and I am attempting to open ports 88 and 5445 and forward them to the IP address of my DVR. This is all new for me. I see several posts for other software version to do this same thing but my version appears to be older?
View 1 Replies
View Related
Jul 10, 2012
what are default ports are open on asa 5520 from outside interface (Zero level Security ) to inside interface (Security level 100)
View 3 Replies
View Related
May 5, 2013
I'm working on setting up a PBX server in our office, and I'm having trouble getting a port opened for SIP on my ASA 5505.I created static NAT rule for SIP traffic from internal server to the outside IP address.I created access rules on outside interface to forward port 5060 to internal PBX server (192.168.1.8)I also disabled sip packet inspection on the ASA.I'm still receiving a message from the PBX that the firewall is configured incorrectly.
[code]....
View 5 Replies
View Related
May 8, 2011
I need to open the following ports on a pix:
-tcp 3230 to 3235
-udp 3230 to 3253
How do I open the ports?
View 2 Replies
View Related
Aug 23, 2012
I need top open ports 80, 443 and 1882 to a specific external client (IP address).
View 8 Replies
View Related
Feb 19, 2012
I got a situation here for Nat-ed IPs i configured. I expected to open some ports on the interface to allow certain traffics to pass through, yet there are some of them are failed. Down is my current config.
object-group service DM_INLINE_SERVICE_1
service-object icmp
service-object tcp destination eq https
[Code]....
The only ports opened are 443, www, 3389 while ports domain, 5061,3478,3389. how to open domain, 5061, 3478, and 3389 ports on my ASA .
View 6 Replies
View Related
Oct 12, 2011
How to list ports open on Cisco ASA 5505 appliance? I have tried to see using Cisco ASDM launcher, but no luck.
View 1 Replies
View Related
Feb 5, 2013
-I need to configure the following on my PIX:
TCP port 2195 - outbound
-TCP port 2196 - inbound
How would I configure this via ASDM?
View 3 Replies
View Related
May 23, 2012
I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies
View Related
Feb 10, 2012
I have a Cisco 877 connected to a VSAT modem, and I can't open ports outside, I dont know why?The Cisco 877 Fa0 port is connected to the VSAT modem at VLAN9, and the rerst of ports are connected to the local lan network at Vlan2. I can enter to Internet, but I can't open port outside. ADSL over pots is not used here.I need to open port 81 for ip address 192.168.1.130 and I dont know why this isn't working. Also if I do: sh ip nat translations I see this:
sh ip nat translations
cisco877#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 172.30.xx.122:81 192.168.1.130:81 --- ---
udp 172.30.xx.122:81 192.168.1.130:81 --- ---
[code].....
View 5 Replies
View Related
Feb 2, 2013
How can I allow all ports to be open? I don't really want my 1811 to block any traffic. I tried the command access-list 1 permit any which allows me to surf the internet, but when I check my web server, and port 3389 (Remote desktop) on yougetsignal.com it says those ports are blocked.
View 6 Replies
View Related
Dec 26, 2010
I need to open ports 25, 993, 995, 443 and 465 to setup MS-Exchange. I don't have an inhouse IT guy and this seems pretty straight-forward in theory but I can't figure it out I need to open ports 25, 993, 995, 443 and 465 to setup MS-Exchange.
View 5 Replies
View Related
Jan 22, 2013
I'm setting up a second exchange 2010 server at a DR location and have been experiencing some problems. The two sites are connected via a pair of ASA5510's using the point to point VPN. I want to rules out any possible VPN issues that may be blocking ports and wanted to see if there is an easy way to do this and simply allow all traffic without any restrictions between the two ASAs. I've attached the scrubbed configs here...Ewing is the primary site and DBSi is the DR site.
View 2 Replies
View Related
May 14, 2011
what command should I use to see all open TCP and UDP ports on my router?
View 2 Replies
View Related
Mar 9, 2011
I was told i need to open certain ports to certain IP's,what ports need to be opened to what IP's for the folowing game as im close to giving up.The games are as follows - Call of Duty 4, Counter Strike 1.6 and Source, Warcraft III, and StarCraft 2
View 2 Replies
View Related
May 15, 2012
The problem is I don't know what to do to open my modem's ports because every single of them except of 80 is blocked,im having some latency problems on online games etc, I asked my ISP and they didnt probably understand what the port is they offered me changing my IP to PUBLIC IP for onetime payment, seeing as they probably dont know what the port is im confused now, will the public ip unblock the other ports?
View 19 Replies
View Related
Apr 6, 2012
No ports seem to open up when they are supposed to be open according to the routers GUI.When i use "port checker"-websites, they even say that port 80 is closed until i actively open it in the router, then it shows up as open. This however only applies to port 80, no other ports shows as open OR allow any traffic through.The same thing happens when the router is in DMZ.What I have done so far is google my butt off without any results, I have tried a new router, a new network card, formated, re-installed windows and made sure that my ISP is not blocking the ports that i have tried to open.My purpose of opening a port is to run a mumble server, which I have run on a Hamachi VPN so far, and that has worked fine.
View 10 Replies
View Related
Sep 15, 2011
I can't open up any ports.I've tried using applications such as Simple Port Forwarding, PFPortChecker and manually by opening my router gateway (192.168.1.1).I can open a port, but if I check whether the port is open, it says that the port is closed. I tried opening ports through Windows Firewall and even disabling firewall, still won't work.
View 14 Replies
View Related
Apr 3, 2011
My reports say that my listen ports are blocked even though I removed my router already. I've enabled these ports in Windows firewall already. Why are they still blocked?
View 4 Replies
View Related
Nov 26, 2011
I have 3 xbox 360s in the house and im having nat trouble with them, i am currently using an actiontec pk5000, from centrylink. i need to know if there is a way to open all ports on this router or if i should get a router/switch that i can open the ports on and use dmz on the actiontec for the new router to make this work.
View 2 Replies
View Related
Dec 6, 2012
I am thinking about opening a port for a certain multi-player game. I was just hoping to know if opening a port for this game could leave me vulnerable to hacking or other stuff like that.
View 4 Replies
View Related
Feb 9, 2011
I have this problem i can't open my ports on my D-link 524, i have opened about 6 ports so that my XBOX 360 works with a open nat, i have also set the DMZ to my xbox's IP which is static btw, my PC is also static. This is how i basically tested and it told me that it was not opened. I went into:
192.168.0.1 -> Advanced -> Virtual Servers ->
Enabled
Name: XBL1
Private IP: 192.168.0.100 ( because i was testing it on the computer - if it
were 360 it would be .141 )
Both UDP and TCP at port 3074
Schedule=Always
Apply -> Then restarts modem/router i waited for 2 minutes before turning them on again, i turned router on first because some guide told me to do that.
I did exactly what they did on portforwarding.com then i opened up portchecker and typed in 3074 and pressed check -> This port is NOT opened. What is wrong? This is how my net is set up.
Modem ZyXEL -> D-Link 524 -> D-Link DGS 1005D -> Computer/XBOX.
View 19 Replies
View Related
Aug 22, 2012
I am pretty new to Cisco - and I have a little 506E that I love. I got it working with my first scenario where I have one server that is my web, and e-mail server.I also opened the RDP port so I can remote into it. The IP's for the old server are internal 192.168.1.23 name ferbweb-external 71.12.111.219 name ferbwebpub. Now - I need to add another server in the exact same way with the same ports 80, 25, and 3389 open to the outside - IP's internal 192.168.1.31 name ferbmail and external 71.12.111.220 name ferbmailpub.I can get to all of these ports on the new server on the inside network - so that is not the problem.So, I went into the config, copied the statements for the old server, and changed them for the new server and added them to the config. I can still get to the old server from the outside fine, but cannot get to any ports on the the new server from the outside at all.I have done a lot of research, and cannot find what I am doing wrong.
View 6 Replies
View Related
Apr 6, 2012
I have open my 25, 110, 80 port on my Server from local i can telnet all those via my private ip but from public ip its not responding.
2nd thing I can ping both ips of My server through private ip and through public ip.
View 1 Replies
View Related
Mar 13, 2011
I need to open ports 5000 and 5001 on my Cisco PIX 501 to enable some users to be able to connect to our CCTV from outside, how should I open these 2 ports?
View 1 Replies
View Related
Jan 30, 2012
I'm using a WRVS4400N and have all the proper ports open as well as the corresponding ones in the windows firewall. I've tested this with multiple port checkers online, such as grc.com. I've even go so far as to put one computer on a dmz and turn off the firewall on others. I've tested multiple ports on different computers. As well as from different remote gateways (other people's computers) just to see if it was a loopback problem.
I have the latest firmware installed and have done this from a clean install as well. This problem won't go away. My addy is nbcr [dot] dyndns.info if you'd like to have a test yourself and see that 118 is indeed closed.
I have an extensive computer repair background and run my own shop repairing computers, however networking is my weak area. Oh and its version 2.
View 4 Replies
View Related
Nov 29, 2011
How do FPS's open UDP ports without needing to configure the router to forward them?I never have to forward ports from my router to my PC. Every game i have somehow manages to open the UDP ports it needs without me having to configure my router. Yet when i check to see if those ports are open (prior to starting the programs) they always come back as blocked or closed. Now I'm currently working on a UDP Internet program and need to know how to do the same thing - open ports on a router without having to make the customer configure their routers. I'm THINKING that other programs start with a TCP/IP connection on the desired port and that opens the UDP port. Is this the answer or is there another method used?
View 5 Replies
View Related
Sep 12, 2011
by saying "open ports" in a router or PC or other Network System what we mean basically? what is opposite terminology, "closed ports"?-used or unused-sensitive-vulnerable or non vulnerable to attacks-exploited easily and when so may attacked and have much bad/serious consequences/results
View 2 Replies
View Related
Jan 31, 2011
Been trying for hours to open the ports on a motorola 2210-02-1022. I have a linksys wireless router. I think the default IP is 192.168.0.1 I put this in browser and get a user name and password window. What do I do from there. I have the port numbers from xbox.
View 2 Replies
View Related
Jun 25, 2011
to access VOD database i must open three ports on the router - not sure how to
View 3 Replies
View Related
