Cisco Firewall :: List Ports Open On ASA 5505 Appliance?
Oct 12, 2011How to list ports open on Cisco ASA 5505 appliance? I have tried to see using Cisco ASDM launcher, but no luck.
View 1 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5505 Open Ports For DVR?
May 9, 2013I have an ASA 5505 with ASA version 7.2(2) and ASDM version 5.2(2) and I am attempting to open ports 88 and 5445 and forward them to the IP address of my DVR. This is all new for me. I see several posts for other software version to do this same thing but my version appears to be older?
View 1 Replies View RelatedCisco Firewall :: Open Ports On ASA 5505 For VoIP?
May 5, 2013I'm working on setting up a PBX server in our office, and I'm having trouble getting a port opened for SIP on my ASA 5505.I created static NAT rule for SIP traffic from internal server to the outside IP address.I created access rules on outside interface to forward port 5060 to internal PBX server (192.168.1.8)I also disabled sip packet inspection on the ASA.I'm still receiving a message from the PBX that the firewall is configured incorrectly.
[code]....
Cisco WAN :: Open Ports On ASA 5505?
Dec 26, 2010I need to open ports 25, 993, 995, 443 and 465 to setup MS-Exchange. I don't have an inhouse IT guy and this seems pretty straight-forward in theory but I can't figure it out I need to open ports 25, 993, 995, 443 and 465 to setup MS-Exchange.
View 5 Replies View RelatedCisco Firewall :: ASA 5505 / Use The Ethernet Ports As Pure Physical Layer 3 Ports
Jun 9, 2013We have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?
View 3 Replies View RelatedCisco Firewall :: Open Ports On Firewall ASA 5510
Apr 18, 2012We have setup new ip camera system and as per our vendor to access the camera from outside we need to open,TCP ports and in firewall and forward to our camera server.
Let say our public ip address is 207.114.111.22 and our local ip address for the camera is 11.11.1.30. We have cisco asa 5510.
Cisco Firewall :: Open Ports On ASA 5510
Dec 1, 2011I just finished implementing a VOIP install and I am trying to setup some softphones and in order to allow the softphones to work I need to open some specific ports for outbound. I am not a Cisco guy, I am a Windows Administrator that also has to maintain my Cisco infrastructure.
View 3 Replies View RelatedCisco Firewall :: Defaults Ports Open On ASA 5520
Jul 10, 2012what are default ports are open on asa 5520 from outside interface (Zero level Security ) to inside interface (Security level 100)
View 3 Replies View RelatedCisco Firewall :: ASA 5501 - Need To Open Required Ports
Nov 27, 2011I have an ASA 5501 running latest code. Per the article at [URL], I need to open the below ports. I have 5 Xboxes (when people come over) and they all have a static IP. My network is 192.168.0.x and is a /24 network.Xbox LIVE requires the following ports to be open: Port 88 (UDP)Port 3074 (UDP and TCP)Port 53 (UDP and TCP)Port 80 (TCP)port 1863 (UDP and TCP) (Kinnect) I defined the various network ports as a service and then created 5 hosts called xbox1, 2, etc with a static IP. I dont have access from the command line (forgot telnet and ssh passwords) , so from the gui, what do I do next?
View 7 Replies View RelatedCisco Firewall :: 3230 - How To Open Range Of Ports On Pix
May 8, 2011I need to open the following ports on a pix:
-tcp 3230 to 3235
-udp 3230 to 3253
How do I open the ports?
Cisco Firewall :: CLI Command To Open Ports 80 / 443 And 1882
Aug 23, 2012I need top open ports 80, 443 and 1882 to a specific external client (IP address).
View 8 Replies View RelatedCisco Firewall :: ASA 5510 8.3 - Unable To Open Ports?
Feb 19, 2012I got a situation here for Nat-ed IPs i configured. I expected to open some ports on the interface to allow certain traffics to pass through, yet there are some of them are failed. Down is my current config.
object-group service DM_INLINE_SERVICE_1
service-object icmp
service-object tcp destination eq https
[Code]....
The only ports opened are 443, www, 3389 while ports domain, 5061,3478,3389. how to open domain, 5061, 3478, and 3389 ports on my ASA .
Cisco Firewall :: 2195 Open Inbound And Outbound Ports On PIX
Feb 5, 2013-I need to configure the following on my PIX:
TCP port 2195 - outbound
-TCP port 2196 - inbound
How would I configure this via ASDM?
Cisco Firewall :: ASA 5505 Vlans Routing & Access-list?
Jan 4, 2012ASA 5505 vlans routing & access-list?
View 4 Replies View RelatedLinksys Wireless Router :: WRT160N V2 - Open Up Ports To Get Open Connection On Xbox
May 23, 2012I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedCisco Firewall :: 5505 - Construct An Access List For Outside Interface Using External Address?
Sep 10, 2012I'm configuring a 5505 for a remote office. Until they are assigned a static ip by the provider I will have to use the providers dhcp address. How do I construct an access list for the outside interface using the external address if I don't know it yet? is there a commnd that will insert the ip address in to the access list once one is assigned?
View 5 Replies View RelatedCisco Firewall :: Open Port 52199 On ASA 5505?
Mar 11, 2011I am trying to open port 52199 on my ASA 5505 I have gone to firewall, access rules and then add tcpip.Not sure if that is the correct place but cannot get it to work?
View 1 Replies View RelatedCisco Firewall :: Email Port Open For ASA 5505?
Jan 16, 2012when I want to let email to come through the ASA5505 from outside to DMZ and Inside network, are the below command lines correct and good enough?
access-list outside_DMZ extended permit tcp outside-network-ip dmz-network-ip eq imap4
access-list outside_DMZ extended permit tcp outside-network-ip dmz-network-ip eq pop3
access-list outside_DMZ extended permit tcp outside-network-ip dmz-network-ip eq smtp
access-list outside_inside extended permit tcp outside-network-ip inside-network-ip eq imap4
access-list outside_inside extended permit tcp outside-network-ip inside-network-ip eq pop3
[code]....
Are there any other TCP ports want to be allowed and other command lines need to be added?
Cisco Firewall :: ASA 5505 Very Slow Speed - Can't Open Some Websites
May 22, 2011I just installed a Cisco ASA 5505 in my company's network,however the network became so slow and many websites cannot be opened or it takes toolong to open (yahoo, hotmail etc.) resulting to a request time out sometimes.
Here is my configuration:
ASA Version 8.2(1) !hostname xxxxxxenable password xxxxxx encryptedpasswd xxxxx encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif outside security-level 0 ip address
[Code].....
Cisco Firewall :: 5505 - Block Everything Except A Few Ports
Apr 15, 2013We have a client that is running a PC on a internet over satellite. To avoid any unessecery traffic over the satellite link (data traffic is quite expensive), we've suggested to use a 5505, as we had one handy already.
So basically what we wanted was to block everything outgoing and everything ingoing, except for example port 22 (ssh).
But I'm struggling a bit, since this is my first cisco router to be configured.
My interfaces are as follows.
Outside - DHCP
Inside (port 1) - 192.168.1.1
I'm only running ipv4.
in ASDM I made a static NAT rule for port 22, being forwarded to 192.168.1.5 (the computer)
in Access rules I made under outside (incomming rules) source=any destination=outside service=ssh action=permit
But when I try to add further rules to block everything else, it takes the SSH on port 22 with it. How should I do this the easiest way?
the hardware setup is pretty straight forward.
sat-terminal(with IP 192.168.0.1 running DHCP) -> 5505 (outside IP=DHCP - inside IP=192.168.1.1) -> computer (IP=192.168.1.5)
Cisco Firewall :: ASA 5505 - PAT Range Of Ports
May 31, 2011I've an ASA 5505 as my gateway for my internet at home. I've one public IP, so I use Port Address translatetion for my internal clients.
Now i wanna setup a FTP server, on a internal client. I will use Filezilla FTP server. I'm running the FTP server in passive mode, since the FTP server would be behind my ASA firewall/nat device.
I need 50 ports for the passive mode to be running.
I will use port range 50000-50050. I can easy make a firewall rule (access-list) that permit that port range.
But how do I PAT(NAT) a port-range on the ASA device? I can only figure out how to NAT one port at the time.
Cisco Firewall :: Forward Some Ports On ASA 5505 8.2?
Nov 7, 2011I need to forward some ports for remote desktop and remote outlook which I host on an internal server. I have looked all over the web and got close, but no hints on how to do it in the asa 8.2. there is an 8.3 guide, but it is just different enough to not work. I am new to this device and cli.
View 3 Replies View RelatedCisco Firewall :: Opening Ports On 5505?
Jan 2, 2013I am trying to configure a new 5505 but I am having difficulties opening ports that allow traffic in from the outside. My setup is Comcast Business Modem (w/ single static IP) -> ASA (10.0.0.1) -> (dumb) Switch -> NAS (10.0.0.10). I am attemping to open port 5001 to the NAS. I am very new to IOS so I have mostly been working in ASDM. Not sure if I am overcomplicating this for myself or what but I am stuck.
My running config is -
ASA Version 8.2(5)
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
[Code].....
Cisco AAA/Identity/Nac :: ISE 3355 Appliance Use Of Both GigE Ports
Apr 12, 2013I am setting up six ISE 3355 appliances 3 in one datacenter 3 in another. They have just installed a new server farm infrastructure using Nexus 5596 and Nexus 2248TP top of rack switches.I have been looking for documentation on how to do NIC teaming on the 3355 or some way to connect Gig0 to FEX101 and Gig1 to FEX102. Or do I just setup a port channel using LaCP between the two different FEX groups?
View 1 Replies View RelatedCisco Firewall :: ASA 5505 Appears To Be Listening On All TCP Ports?
Aug 7, 2011When I do an NMAP scan against my ASA 5505 on it's internal interface's IP address, it appears to be listening on all TCP ports. If I do it from across a VPN tunnel, the ports show as open according to NMAP, if I do the scan from the local subnet they show up as unknown. I'm running 8.0.4 code on this ASA.
View 1 Replies View RelatedCisco Firewall :: Allow SIP On Multiple Ports Not Only 5060 (ASA 5505)
May 14, 2012We've read everything about inspecting SIP packets and allowing them to pass through on port 5060, the default SIP port. However, our setup requires the ASA 5505 to allow SIP on ports 5060, 5160 and 5260.
Is this possible with the ASA 5505? If it's not, it would be a blocking issue for us to move forward with ASA appliances. We are currently investigating in a lab environment and really having difficulties configuring it to facilitate full SIP functionality.
Cisco Firewall :: 5505 - Forward Range Of Ports In 8.4?
Mar 11, 2011I have an ASA 5505 running 8.4(1), and I'm configuring it with ASDM 6.4(1). The outside interface is configured with a single static address. I have a few services port forwarded sucessfully to three different servers on the inside network.
I need to make a media proxy on a SIP server available to the outside. It requires a large range of forwarded UDP ports for the media channels.
I tried adding a network object NAT rule like the others I'm already using to forward HTTP and RDP. I entered a range of ports for the real port and the mapped port using the syntax 60000-60999. ASDM accepted it, but the NAT rule list displays "Any" in the service column. When I apply the change, I get the following error:
nat (inside,outside) static interface service tcp 60000-60999 60000-60999
^
ERROR: % Invalid input detected at '^' marker.
How do I forward a large range of UDP ports from the outside interface to a single server on my inside network? I'd like to use ASDM, but I can switch to the CLI if that works better.
Cisco Firewall :: ASA 5505 Ports Available For Traffic Flow In Router
Oct 21, 2011I am in search of a new routers. I don't have any special task to do. Just the flow of maximum 2mb/sec data and some times video conference. However I need the Voip solution as well. I just got excited on the cisco ASA 5505 product. Can this fulfill my requirements. Can this work as the router 1841. Does this support DMVPN, SSL VPN and dynamic routing. Can I upgrade the IOS for dynamic routing purpose. Do you recommend to purchase this produe act or not instead of router ? What are the limitations of this product. If I purchase this I can use this as an router as well as strong security solution. How many ports are available for traffic flow in ASA 5505. Are all routed mode or some of them switch port.
View 1 Replies View RelatedCisco Firewall :: 5505 - Opening TCP Ports In ASDM Launcher
Jun 20, 2011 I am trying to open up 3 TCP ports in Cisco ASDM Launcher:
16000
16001
8098
And have a Cisco ASA 5505 Router. I need these ports open in order for a software that I have installed on the server to communicate with my local client computers for my business, The software is installed on Windows 2008 Server Standard Edition and was installed with MicrosoftSQL 2005. The software and Microsft SQL 2005 is pretty much installed and just requires this last step in order for the server to be connected to the local computers. In order to resolve this, I have gone to.
Cisco Firewall :: 5505 - Opening Ports On DHCP Outside ASA Interface
Feb 25, 2011I am used to setting up access-lists on outside interfaces with ip addresses that are static. I have recently been given a site that is using a dyndns.org client for name to ip address resolution on an outside interface that is dhcp assigned. I created an access-list to open up ports 41794 and 41795 to an engineering application but everytime I try to connect from the outside I get a syn timeout. The application works when inside the lan. Basically I want to allow outside connections from anywhere on the outside to go to ports 41794 and 41795. I am running a Cisco ASA 5505 on version 7.2(4) Below is my conifg. what I may have misconfigured?
: Saved:ASA Version 7.2(4)!names!interface Vlan1 nameif inside security-level 100 ip address 172.31.2.1 255.255.255.0!interface Vlan2 nameif outside security-level 0 ip address dhcp setroute!interface Ethernet0/0 switchport access vlan 2!interface
[Code].....
Cisco Firewall :: 5505 Static Nat With Port Redirection 8.3 Access List Using Un-Nat Port
Aug 15, 2012I am having difficulty following the logic of the port-translation. Here is the configuration on a 5505 with 8.3,So I would have thought the outside access-list should reference the 'mapped' port but even with 3398 open I cannot remote desktop to the host. If I open 3389 then I can connect successfully.
View 12 Replies View RelatedCisco Firewall :: ASA 5505 8.4(1) - Map Multiple Inside Hosts Ports To One Public IP?
Jun 22, 2011I'm stuck at asa 5505 nat, port forwarding configuration Here is what i need:
host1: 192.168.1.1 service tcp/100 >>>>> public ip 1.1.1.1 service tcp/100
host2: 192.168.1.2 service tcp/200 >>>>> public ip 1.1.1.1 service tcp/200
host3: 192.168.1.3 service tcp/300 >>>>> public ip 1.1.1.1 service tcp/300
So people from remote just need to use 1.1.1.1 public ip to access all the ports on three different inside server.I can do this on my old ASA 5505 with 8.0(4). Looks like there're lots of change from 8.0 to 8.4.
Cisco VPN :: Adaptive Security Appliance Asa 5540 Unable To Block Server Ports
Aug 10, 2011I was configure IPSEC vpn on ASA5540 and i have problem with port blocked. I am unable to block server ports to remote users.See below configuration. I need to configure vpn filter list but don't know how to configure vpn filter list.
View 5 Replies View Related