Cisco Infrastructure :: ASA5505-SEC-PL PAK Available To Be Used
Sep 25, 2012
My company purchased a PAK for ASA5505-SEC-PL a while back. I found it unopened and need to know if it can be used, without activating it on an ASA. I opened up a case with the Cisco TAC, provided them the PAK serial number and got the following responses from 2 different individuals:
1.Since the product was covered under warranty and then expired this means that the activation key was used before.
2. This PAK number is expired since (Warranty End Date 21-Feb-2009).
I responded that I am not interested in warranty information but I just want to know if the PAK can be used. Just because the warranty expired, does that REALLY mean the PAK can no longer be used? That doesnt make sense to me. Isn't there a tool on Cisco's website to put in the PAK S/N to see if it is available, has been used, and if so, when?
View 2 Replies
ADVERTISEMENT
Mar 13, 2011
We have several branch offices that only have a Cisco ASA 5505 connecting clients to the Internet, our main office and other networks. Some of the branch offices uses Site-to-Site VPN to connect to our main Office, other uses a VPN-service delivered by our ISP.
The networking is working fine, but we are having problems with figuring out how to handle dns lookups. I see that the ASA DNS Client can use conditional DNS forwarding, but it cannot act as a DNS server for our clients on the inside network.
We want to do the following:
- Default dns quires should use the DNS servers for the site's local ISP (some sites also uses dual ISP, so we are using DNS1 and DNS2)
- The domain name: company.local should use our main office DNS server (acces by Site-to-Site VPN or our ISP's VPN)
- The domain name: sitea.company.local should use our SiteA DNS server (acces by Site-to-Site VPN or our ISP's VPN)
etc...
We have solved the issue by using Windows DNS server's conditional forwarding for the branch offices that has a local Windows 2008 domain controller.
our branch office's that only have a Cisco ASA 5505 Security Applience?
View 3 Replies
View Related
Jan 8, 2013
What is the difference between RPS 300 and RPS 675?
View 3 Replies
View Related
Jan 19, 2012
what is the use SPA and SIP...in router hardware ? What if we do not have them ?
View 1 Replies
View Related
Sep 25, 2012
I am managing a Cisco 881 with Adv Ip Services ( CISCO881-SEC-K9). It has IOS 15.0(1) M8 on it. I see that there is a new IOS version 15.2M&T that (I think is applicable), and I have read the upgrade procedures for upgrade via USB and TFT.
If I install it will my license for Adv Ip Services be preserved or overwritten. And if the latter, do I need to export it and reapply it? If so, what is the process?
View 3 Replies
View Related
Jul 31, 2006
I have an ME2400 running private V LANs. The primary V LAN is 20 and the secondary V LAN's are 21 and 22. Currently, management traffic is still on V LAN 1. My question is now that the ME2400 does not have anything plugged into v lan 1; the line protocol goes down, which means that I can no longer access the switch remotely. Is it possible to keep a SVI up up even though nothing is plugged into that V LAN? If so, how do I go about doing this?
View 2 Replies
View Related
Mar 24, 2013
I need to use:
track 1 ip sla 1 reachability
In my 4507R core switch. Need to know which IOS should I use for this command as now I am using
cat4500-entservices-mz.122-46.SG.bin
In this when I am using
(config)#track 1 ip ?
route IP route
View 1 Replies
View Related
Mar 30, 2013
What is the difference between ASA-SM1 and FWSM and what is the throughput of it?
View 1 Replies
View Related
Feb 22, 2012
I need some fiber to run between a Cisco Nexus and an IBM server with Intel NIC. It's 30meters, and LC-LC connectors.What is the difference between 62.5/125 vs 50/125?
View 1 Replies
View Related
Nov 28, 2011
Is there any difference between these two models from hardware standpoint?
View 1 Replies
View Related
Jul 4, 2011
I am going to be updating the IOS on our Cisco ASA 5520 from verion 7.0(8) to 8.2(5). I am also going to setup AnyConnect. Are there any major changes in the 2 IOS versions that I need to be aware of or will the config work in either version? Also, we are currently using the Cisco VPN Client to connect to our network. Will that still work after the upgrade?
View 3 Replies
View Related
Jul 6, 2011
Is the configuration information for each of the access points that has joined a wireless lan controller stored somewhere specifically in the configuration screens? I enabled the power injector override on one of my access points which is plugged into a POE switch and of course now it will not stay up for more than a few seconds. Therefore I cant just go to the wireless list and modify the configuration there. I cannot seem to find it anywhere else to change it and bring it back up.
View 3 Replies
View Related
Apr 9, 2013
WCS 7.0 to Prime Infrastructure 1.2 migration?I am so confused on the migration procedure as I found the documents in Cisco kind of contradictory.Some document said it is required to upgrade WCS to NCS 1.1 before to go to prime infrastructure 1.2.And the other document said WCS can directly upgrade to prime infrastructure 1.2.
View 13 Replies
View Related
May 6, 2013
we installed a new CPI 1.3. Both machines are in the same subnet and close to each other. Everything looks fine and is installed as we see in the config guide.When we halt the VM of the primary Server, the backup takes over but with errors. I'm also not able to login! [code] my colleauges did the same a few days ago also with problems or similar problems and restore the server from backup.
View 2 Replies
View Related
Feb 20, 2013
I´m about to upgrade a customers appliance box to PI 1.3. I am guessing an upgrade to 1.2 would be almost the same, license wise.
View 10 Replies
View Related
Mar 24, 2013
I have WS-3750G-12S-E with me and would like to configure BGP on the same. whether it is advisable to configure BGP on 3750G or not.
View 10 Replies
View Related
Jun 13, 2011
I purchased a Cisco 2621 with IOS Version 12.3(26) on it. When I went through the commands, I couldn't find any VLAN or VTP available. I need to make sure I can see this on the device in order for me be able configure VLAN on my network and get ready for my CCNA exam.
Below is the version on the device and I also attached the available commands:
Version: IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)
View 4 Replies
View Related
Oct 10, 2011
I have a 7606 running c7600rsp72043-advipservicesk9-mz.122-33.SRD2.bin with SIP-400 card that has suddenly stopped working, on checking the logs i see the following:
%ONLINE-SP-6-TIMER: Module 3, Proc. 0. Failed to bring online because of timer event
%C7600_PWR-SP-4-DISABLED: power to module in slot 3 set off (Module Failed SCP dnld)
I have tried reseating and even moving it to a different slot but no luck.
%ONLINE-SP-6-TIMER: Module 4, Proc. 0. Failed to bring online because of timer event
%C7600_PWR-SP-4-DISABLED: power to module in slot 4 set off (Module Failed SCP dnld)
sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 20 ESM20G 7600-ES20-GE3C JAE1237UT90
2 4 7600 ES+ 7600-ES+4TG3CXL JAE13157HIW
3 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAE13219CZH
5 2 Route Switch Processor 720 (Active) RSP720-3C-GE JAE1151819I
6 2 Route Switch Processor 720 (Hot) RSP720-3C-GE JAE11495POH
[code].....
View 4 Replies
View Related
Jun 6, 2012
Are the IOS commands the same on a router and a ASA for these two topics....CBT Nuggets where I train has 553 videos for some of the new topics. I am preparing for 554 as it has more ASA focus and thats more interesting to me.
View 1 Replies
View Related
Jan 10, 2013
I have recently had to rebuild the cookie information for a cisco 877 series router due to it being erased by an electrical surge.
I've successfully got it running again by copying the cookies from an identical router (obviously changing the serial numbers and so forth so it passes its verification checks).
The last piece of information I need is the Chassis MAC Address. I don't want to use the one from another router since there will probably be conflicts.
I tried following this Field Note, even though it isn't specifically for my model and it didn't work.
[URL]
how I can get the mac address from the system somehow?
View 2 Replies
View Related
Sep 12, 2012
Just downloaded the Eval copy of Cisco Prime 1.2.
Wondering if I can run this under a VMware Player instead of loading it on a UCS server?
If yes, is there a recommended version of player?
View 1 Replies
View Related
Jun 3, 2012
We have been deploying ASA 5500 series devices for longer than I've been around. We have always used a script from a tftp server that would use the "wr net" command to send the running-config to the tftp server for daily backups. The script was setup to automatically name these "hostname-mm/dd/yyyy" for each device. We cannot seem to get this working on devices running ASA 8.43. In fact I can't even get the "wr net" command to work from the ASA at all even though I have the tftp server defined correctly (note this is going over the "outside" interface so I always get the warning regarding using the interface with the lowest security level). I'm sure there is something out there that I have overlooked, however I have not been able to come across this. Have there been any changes in the setup, or functionality of the wr net command or the tftp configuration with ASA 8.43?
View 1 Replies
View Related
Dec 20, 2011
We want to get MIB files for snmp v2 from Cisco 2851 Router running with IOS below,
c2800nm-advsecurityk9-mz.124-15.T7.bin
View 1 Replies
View Related
Feb 12, 2013
I have NCS 1.0 with 100 devices support license installed. Now knowing it has reached end of sale, and also for the fact that Prime does cover devices like routers, i went ahead to the upgrade path via PUT (Product Upgrade Tool). Finally I received an email (OBA) advising my order is ready. This email included two items in the shipment,
L-N-PI12-100-M=
NCS 1.0 to Prime Infrastructure 1.2 Minor Upg 100 Device
L-PILMS42-100-M
Prime Infrastructure LMS 4.2 - 100 Device Upgrade Lic
When i click to the link in the same email to download the license, it only shows me one file which is L-PILMS42-100-M I tried using this file and installing on the NCS1.0 but it gives me error that this file is not a license file. The license name suggests me that it is not the license to be installed on the NCS. The file should be L-N-PI12-100-M=
View 5 Replies
View Related
Oct 24, 2011
According to the Installation notes for ACS 5.3 we need 500GB of storage for a working installation - if not it defaults to taking 60 GB of disk space for an eval version.
View 1 Replies
View Related
Jan 12, 2013
I need to know how to do the upgrade from WCS 7.0 to Prime Infrastructure 1.2.
I was reading and i need to upgrade to the NCS 1.1 before to go to prime infrastructure 1.2.
I will need license to NCS 1.1 before upgrade to infraesctructure 1.2 ?
Will i have some problem with this upgrade ? correct process for not have any problem with this upgrade ?
View 4 Replies
View Related
Oct 24, 2012
I'm Facing some problem on Prime Infrastructure 1.2 NFR, when I add the NFR License to NCS, it show error "Unknown feature (PC_HIGH)."
View 1 Replies
View Related
Oct 29, 2007
I have an 871 setup at home with a fairly basic configuration (NAT, Firewall, EasyVPN, Wireless). What I've noticed is that for traffic going from the WAN interface (FastEthernet4), it seems to be hitting the ACL in place for NAT. My config: [Code] .......
Where 76.22.98.39 is the dynamic IP address from the cable provider. If the traffic isn't passing through the router, why is it trying to NAT it?
IOS Version is 12.4(6)T9
View 18 Replies
View Related
May 26, 2013
I try to create a reposiroty for FTP Backup but it is not working with directories. Isn't it possible to create FTP repositories with directories?
I need to ad this URL e.g.: ftp://server/IT/Wi-Fi/Backup
This is not working. % Error reading directory on remote server
It works only when I add only the server. ftp://server/
Is there any way to add directories to the URL? Or what is wrong in my thought?
I think to use NFS but I'm not sure if that way is better as FTP, because FTP is default
View 4 Replies
View Related
Oct 9, 2012
I am thinking of upgrading the WCS to Cisco Prime NCS in our environment, but i read NCS is replaced by Prime infrastructure. Now I am confused if I should go for the NCS or Infrastructure. option for a smaller environment with 200APs and 4-5 WLCs(5500, 4400 and 2100) and future proof for the next 5 years. I heard WCS is going to be obsolete soon but didnt find any official announcement except for legacy licenses?
View 5 Replies
View Related
May 9, 2013
We have ACS 5.3 with built in ACS View, does PI 1.3 support it? We have set up in PI 1.3 but unable to see the authentication records for clients, I wonder if they are compatible.
View 4 Replies
View Related
May 28, 2013
I am looking for the licensing and upgrade path for going from WCS 7.0 to PI 1.2.At present I have a WCS licensed for 200 APs which is managing one controller and 150 APs.I intend to use the Cisco Prime Upgrade Promotion to order R-W-PI12-M-K9 (WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration) and L-W-PI12-100-M and L-W-PI12-100-M to match the number of licenses on the WCS.
Once Prime is installed I also want to manage another 50 devices, does that mean I have to purchase the Cisco PI 1.2 Base License and Software (R-PI12-Base-K9) and another 50 Lifecycle licenses, or will my existing 200 licenses from the upgrade suffice.
View 2 Replies
View Related
Oct 3, 2012
Trying to add Cisco 2504 Wireless Controller, Software Version 7.3.101.0, to Cisco Prime Infrastructure 1.2 (1.2.0.103), License Evaluation, with no success. When using Discovery, Discovery Job show Credential Errors: "Error occurred due to invalid SNMP credential"
When Add Device from Device Work Center I get: Reachability is "Unknown", Device Type is empty, Collection Status is "Managed with Warnings", with message "SNMP Failure: No Response for SNMP Get request.", Collection Time is empty.
I've tried with both snmp v2 and v3. I've tried to lower "Maximum VarBinds per Get PDU" to 10 or 20, cause I've read similar problem in NCS.
View 1 Replies
View Related
