Cisco Infrastructure :: Fiber Patch Cord Between X2-10GB-SR And SFP-10G-SR?
Oct 2, 2010I would like to know which patch cord should I be using between X2-10GB-SR and SFP-10G-SR.
View 5 Replies
ADVERTISEMENT
Cisco Switches :: Minimum Fiber Patch Cable Length For MGBSX1
Dec 14, 2011I want to "stack" a couple 300 series gigabit switches with fiber using a pair of MGBSX1 GBICs and a single LC to LC patch cable.Is there a minimum supported patch cable length in this configuration?
View 2 Replies View RelatedCisco Switching/Routing :: 3750 Using Fiber Connection Using Patch Panel
Apr 2, 2013I have a 6500 connected to 3750 using fiber connection using patch panel.on the gig port of the 6500 give of error in Input errors, CRC and FRAME.There is no error from the 3750 gigport.
View 6 Replies View RelatedCisco Switching/Routing :: Switches Support SM Or MM Fiber Patch Cords WS-C2960
Jan 23, 2012we recived the following switches.
WS-C4507R-ECat4500 E-Series 7-Slot Chassis, fan, no ps, Red Sup CapableWS-C2960S-24TS-SCatalyst 2960S 24 GigE, 2 x SFP LAN LiteWS-C3750X-24T-SCatalyst 3750X 24 Port Data IP BaseGLC-LH-SMGE SFP, LC connector LX/LH transceiver
The current situation that all existing Fiber Patch Cords cables & fiber cables coming from field are multimode. So, I think we have a compatibility issues. We need clarifications from your, what are the options that we can do to resolve this issue.Can we connect the above switches to multimode Fiber Patch Cords cables?
Cisco Infrastructure :: Cat4510 Use Of X2 10Gb In 2 Line Cards
Jan 3, 2013We have the Cisco Cat4510 with the 2 Sup-6Es as follows:
5 6 Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E
6 6 Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E
Each line card comes with dual 10Gig Ethernet X2 Optics. I am currently using int g5/1 and g6/2. I tried to connected a server to the int g5/2 and assigned the poper parameters(VLAN, speed, ...etc) but I am the int is showing down. Is there some type of limitations in using the second port of each line card?
Cisco Infrastructure :: Ciscowork 3.2.1 Daemon Manager Is Not Working After Patch Installation
Jan 16, 2013Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:Documents and SettingsAdministrator>net start crmdmgtdThe CiscoWorks Daemon Manager service is starting.The CiscoWorks Daemon Manager service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
Cisco Infrastructure :: Fiber 62.5 / 125 Versus 50 / 125?
Feb 22, 2012I need some fiber to run between a Cisco Nexus and an IBM server with Intel NIC. It's 30meters, and LC-LC connectors.What is the difference between 62.5/125 vs 50/125?
View 1 Replies View RelatedCisco WAN :: X2-10GB-LR Having 10GB Uplink Between Two Buildings
Oct 20, 2011My manager ordered some Cisco X2-10GB-LR in hopes of having a 10GB uplink between two buildings. We put those modules on the switch and we are getting link flap errors, then the ports goes into err-disabled state.
I was later told there is a couple of "hops" between the buildings, it could be a patch panel or a fiber switch, I do not know at this point. My guess is, we are getting link flap because the "hops" are only running at 1GB. Would this be a typical sympton of the link flap error message? and is there any way to test if there is switches inbetween our routers?
Same Internet Cord Works On 1 Computer But Not The Other?
Sep 8, 2011I was using firefox this morning and my desktop suddenly just stopped connecting to the internet. I unplugged the ethernet cord and tried it on my laptop and it connects to the internet fine using the same ethernet cord. I have on-campus internet, so there is no router or anything for me to try resetting. I tried the windows 7 troubleshooter and it said to reset the router, but there is no router to resetOn the non-connecting computer, I can ping the IP address and the default gateway address, but not the DNS servers or something like yahoo
View 1 Replies View RelatedSet Up Wireless Network With Just Ethernet Cord?
Mar 9, 2011So I'm going to college soon and for some odd reason, they are only giving us an ethernet cable in our dorm rooms. (We do not have access to the router or wifi in our dorms for some odd reason). Since this is the case, I want to sometimes bring my laptop onto my bed rather than be constrained to my desk, where the cord is. Is there any way to get some sort of device, like a wireless bridge or router that gets its source from ethernet and I can set up a wireless network?
View 9 Replies View RelatedHow To Plug In Ethernet And Phone Cord Cable
Jan 6, 2011This modem has only three ports. How can I plug in an Ethernet cable and a phone cord cable?
View 1 Replies View RelatedPC Won't Detect Particular Ethernet / Though Both Cord And Computer Work
Aug 26, 2012When I plug my ethernet cord into my Dell XPS laptop, Windows doesn't detect that I have a connection. I've tried another cord and it works (it's too short to use instead) and my roommate has tried my cord and it works fine on his computer.I've tried diagnosing the problem, disabling and enabling the Local Area Connection, but nothing seems to work.
View 9 Replies View RelatedHP Pavilion Dv6 Recognizes One Specific Ethernet Cord And No Other
Feb 25, 2013I live in a dorm where internet is provided through a router that is pretty much encased in a metallic box on the side of the wall. At the beginning of the year, my parents bought me an extremely long ethernet cable ( about 15 feet I'm guessing). I have been using this ethernet cord with no problems up until now. I find it difficult to maintain the long cord as it gets tangled everywhere and I switch it between my laptop and my xbox (I can't get a switch to work). After prolonged switching between the xbox and the laptop the little tab thing that you push broke off and the cable starts to slide and disconnects me from the internet. I decided to get another ethernet cable and I tried connecting it but my laptop does not detect the cable and I do not see any lights turn on like my other ethernet.
View 1 Replies View RelatedCisco Switching/Routing :: 3750X / 3560X - Power Cord For PDU?
Aug 28, 2011Is the CAB-C15-CBN - Cabinet Jumper Power Cord, 250 VAC 13A, C14-C15 Connector, supported on the Cisco Catalyst 3750X/3560X. I need to plug the switches into a UPS PDU, that requires a C14 plug.
View 2 Replies View RelatedCisco Switching/Routing :: WS-C3560G-48PS-S Power Cord
Nov 23, 2011I need to prepare a Bill of Material for WS-C3560G-48PS-S switch.
Whether we should go for CAB-AC-JPN - AC power cord for Japan OR CAB-AC-ACE AC power cord for Europ
Cisco Switching/Routing :: Power Supply Cord For 4500?
Apr 3, 2012Currently I am using 1000W power supply in Cisco 4500 and I want to upgrade to 2800W power supply.My question is
1) Whether I have to change the power cord while upgrading power supply
2)Whether power cord comes along with the Power Supply while ordering from Cisco
When Cord Is Not Attached Screen Is Bright But Dims When Plugged In
Feb 9, 2012when i unplug the computer it nice and bright but when i plug it back in it goes dim
View 1 Replies View RelatedD-Link DIR-825 :: Stays On Without Power Cord When Powered USB Hub Is Connected
Mar 6, 2012My DIR-825 stays on even when I flick the power switch, for as long as I don't disconnect the externally powered Belkin USB hub from it. Some lights do come off, Internet light turns orange, but it stays on. If I disconnect the hub before trying to shut down the router, it turns off instantly.
I feel slightly worried by this because as far as I am aware, a USB client device shouldn't be feeding power to the host. On the other hand, the host shouldn't be accepting power from the client either.
Also, sometimes after days since last reboot, the USB light on the router is not on despite connected devices, and they may or may not appear in Shareport.
Cisco Wireless :: Power Cord For Light Pole Installation R3P-40NA
May 22, 2013Using following part for outdoor mesh AP power feed:
40-ft (12.2-m) power cord (AIR-CORD-R3P-40NA=) for light pole installations in the US and Canada.
I wonder what happens when the lights turn off?
Toshiba Laptop Dropping Internet Connection On Unplugging Power Cord?
May 21, 2012Once I unplug my toshiba saelillite power cord from the laptop itself, I lose my internet connection. Once I plug power cord back into the laptop, I am back online
View 6 Replies View RelatedDesktop Connects Fine To Internet Via Ethernet Cord To Modem And Laptop Doesn't?
Jul 21, 2011My desktop with Windows Vista is connected to the modem with a standard ethernet cord, and when I try to plug the same cord into my laptop I don't get any internet access. My laptop is running Windows 7. I have tried powering the modem off for 15 seconds multiple times, but to no avail. I am just trying to make this connection work until I purchase a router.
View 7 Replies View RelatedCisco :: How To Connect X2-10GB-SR Optics To GLC-SX-MM
Jan 19, 2012Is it possible to connect a 10G optics to a 1G optics using a SC/LC multimode jumber. Will changing the clockrate at 1oG side solve the issue? or do i have to have strictlt 10G to 10G link or 1G to 1G link?
View 8 Replies View RelatedCisco Switching/Routing :: X2-10GB-SR Compatible With GLC-SX-MM?
Apr 9, 2013one side Catalyst 6500 module with X2-10GB-SR= otherside WS-C2960S-48FPD-L.
is both end compatible with each other.
TS-879 Pro - 8 Or 16 Port 10gb Switch For Copper?
Oct 30, 2011I am looking at doing some upgrades to my home office and i was looking at getting either 1 or 2 TS-879 Pro (Qnap9) and upgrading the nics to 10bg nics.. .but my problem is where can i get a suitable 8port or 16port switch for these..
I have never worked with 10gb stuff before ..so i am looking for advise on what switchs i can get..I will be mainly doing Vitrualization and data management on it.
Cisco WAN :: 1X10GE V2EP To Setup Asr With 10Gb Connectivity
Jan 19, 2012I am trying to set up an ASR with 10Gb connectivity. I noticed a new card that does not appear to show up in any data sheets. This card is considerably less expensive than the other SPAs and I am wondedring what the differentiators are for this card. I would also be interested in what tranceiver type this card supported.
View 4 Replies View RelatedCisco Switching/Routing :: X2-10GB-SR Compatible With 3750-E?
Jan 31, 2012i will be buying 2 x 3750-E and will connect our server with 10G to the x2 port of 3750. is X2-10gb-SR compatible with this? do i need any converter module?
View 1 Replies View RelatedCisco Switching/Routing :: 4500 Can Connect 10Gb SFP+ To Standard 1Gb SFP
Nov 15, 2011I'm looking at provisioning a Catalyst 4500 with a WS-X4712-SFP+E module to allow for future 10Gb connectivity via 10Gb SFP+ interfaces. These cards are backwards compatible with standard 1Gb SFP interfaces but I'm wondering about the other way around; ie. can you populate these blades with 10Gb SFP+ interfaces when they connect to Catalysts with only 1Gb SFP interfaces at the other end?
The data sheets don't really explain this. It seems pointless getting 10Gb SFP+ interfaces for the 4500 when it's only 1Gb at the access layer end, but these access switches will be replaced in the near future (~12 months) and if the 10Gb SFP+ interfaces support connections at 1Gb speeds upfront, it would mean I could retain these interfaces when the access switches upgrade to 10Gb connectivity capabilities down the track. Does the 10Gb SFP+ interfaces are compatible with 1Gb SFP's or only other 10Gb SFP+ interfaces?
Cisco Switching/Routing :: 6509-E VSS 10gb Port Count?
Jan 15, 2012Created two 6509s as VSS with just one 10gb connection?I know it is recommended to use both the 10gb connections on the sup-720 from below configuration guide
"
Information about VSL Topology
#
A VSS contains two chassis that communicate using the VSL, which is a special port group. Configure both of the 10-Gigabit Ethernet ports on the supervisor engines as VSL ports.
"
But will the VSS come up if I use just the one?
Cisco Switching/Routing :: 4900M Connecting 10GB Interface To 1GB
May 12, 2012I have 4900M with X2-10G-LX4I need to have a link from it to 3560X GLC-SX-MM using MM Fiber Patch Cord.any configuration required in 4900M to change the speed of X2-10GB-LX4 to 1GB ?
View 2 Replies View RelatedCisco Switching/Routing :: X2-10GB-T Transceiver Supported On WS-X45-SUP6L
Feb 7, 2012Does the X2-10GB-T copper transceiver is supported on the WS-X45-SUP6L supervisor?
View 1 Replies View RelatedCisco :: Catalyst 3750E - LMS 3.1 And CiscoView 6.1.8 Not Showing 10Gb Modules
Oct 5, 2011We've got a CiscoWorks (LMS 3.1) with CV 6.1.8 and it doesn´t display the new installed 10Gb (X2-10Gb-SR=) modules in the Catlyst 6509E chassis and Catalyst 3750E, what can I do to fix it?
View 2 Replies View RelatedCisco WAN :: Install New Nexus 7K Installed SUP And One 32-Port 10Gb Module?
Jun 29, 2011I am going to install new Nexus 7K. Installed SUP and one 32-Port 10Gb module. When I open the box to install this 10Gb module, I saw that there is a carbon paper is tighted with ***** on the top of the module. confirm either it will insert in Switch with carbon paper or have to remove this carbon paper?
View 1 Replies View RelatedCisco Switching/Routing :: 3750 Stack - 10GB And 1GB Connections
May 22, 2012I have two 3750 stacks that are currently connected using two1GB fiber connections in an etherchannel. I now added new switches to each stack with 10GB modules in them. We would like to bring up the 10GB connection, but still have one of the 1GB lines as a backup, or even the whole etherchannel. Is there a way for us to make the 10GB the main and the 1GB the standby?
View 3 Replies View Related
