Same Internet Cord Works On 1 Computer But Not The Other?
Sep 8, 2011
I was using firefox this morning and my desktop suddenly just stopped connecting to the internet. I unplugged the ethernet cord and tried it on my laptop and it connects to the internet fine using the same ethernet cord. I have on-campus internet, so there is no router or anything for me to try resetting. I tried the windows 7 troubleshooter and it said to reset the router, but there is no router to resetOn the non-connecting computer, I can ping the IP address and the default gateway address, but not the DNS servers or something like yahoo
View 1 Replies
ADVERTISEMENT
Aug 26, 2012
When I plug my ethernet cord into my Dell XPS laptop, Windows doesn't detect that I have a connection. I've tried another cord and it works (it's too short to use instead) and my roommate has tried my cord and it works fine on his computer.I've tried diagnosing the problem, disabling and enabling the Local Area Connection, but nothing seems to work.
View 9 Replies
View Related
Jul 10, 2012
At random times the network cable is apparently unplugged but then it reconnects and then I cant receive anything.I disconnect the LAN then reconnect and then it works again. This is on a winXp computer.
View 16 Replies
View Related
Aug 4, 2012
Just finished building my new computer yesterday - i installed windows 7 and all the motherboard drivers etc - everything went smoothly. I then plugged in my ethernet cable but saw that in normal mode my computer had very slow internet. I went into safe mode with networking and tried the internet there and it was its normal speed. Obviously something is booting up in normal mode that is stopping/limiting the connection. I uninstalled norton (came with the motherboard drivers) using the uninstall norton tool, i also uninstalled any other virus protection and disabled my computers firewall but to no avail - it's still real slow.
View 3 Replies
View Related
May 21, 2012
Once I unplug my toshiba saelillite power cord from the laptop itself, I lose my internet connection. Once I plug power cord back into the laptop, I am back online
View 6 Replies
View Related
Jul 21, 2011
My desktop with Windows Vista is connected to the modem with a standard ethernet cord, and when I try to plug the same cord into my laptop I don't get any internet access. My laptop is running Windows 7. I have tried powering the modem off for 15 seconds multiple times, but to no avail. I am just trying to make this connection work until I purchase a router.
View 7 Replies
View Related
Mar 28, 2011
I port forwarded port 80 for wamp. It works on my old **** pc, but not my laptop. They are both connected via ethernet right now, and it doesnt work.
View 1 Replies
View Related
Feb 21, 2013
I bought a "Nexxt Solutions 8 ports Ethernet Switch" and it only allows me to use the internet on the first computer that I plug into one of the Lan ports. I get a Limited Connection MessageI did some research and found something about a DHCP Server and automatic IP assignment, but I can't find a comprehensive tutorial on how to setup this.I'm sure the solution is simple.
View 2 Replies
View Related
Jul 18, 2012
I have a shared laptop that allow some to connect to the wireless network while it will not let one person to.
View 1 Replies
View Related
Jan 25, 2011
MY ISP is AT&T. I have their Westell DSL modem, with a bridged connection to a Linksys wireless router. The router is connected via ethernet to a dead computer: a 7 year-old Dell desktop that will boot up but shut down right away. I have been able to connect multiple laptops wirelessly to this network. I thought an ethernet connection was required in a home network such as mine? The cable has been plugged into a dead computer for several months and frankly I'd like to get rid of the desktop. What exactly is the ethernet requirement - just to be plugged into a port? Could I theoretically just yank the ethernet card out of the desktop and use it instead of the whole dead system?
View 5 Replies
View Related
Feb 25, 2012
For some reason I cannot ping or FTP on a specific computer on my home network. All other computers work fine and the specific computer works fine on other networks. But the combination of this computer and my home network it doesn't like.
I have disabled both windows firewall and my virus software but nothing seems to work. It seems to be a timeout issue as FTP and ping sometimes does work but FTP is increadibly slow when it works and the ping time is very high 670ms and above. I am running windows 7 and my router is a netgear n150
View 4 Replies
View Related
Jun 2, 2011
815 is setup & works computer is connected to wifi but I can not surf the net I am using a Amped UA600 usb adapter I have no idea why I still not not surf the net?
View 1 Replies
View Related
Mar 9, 2011
So I'm going to college soon and for some odd reason, they are only giving us an ethernet cable in our dorm rooms. (We do not have access to the router or wifi in our dorms for some odd reason). Since this is the case, I want to sometimes bring my laptop onto my bed rather than be constrained to my desk, where the cord is. Is there any way to get some sort of device, like a wireless bridge or router that gets its source from ethernet and I can set up a wireless network?
View 9 Replies
View Related
Jan 6, 2011
This modem has only three ports. How can I plug in an Ethernet cable and a phone cord cable?
View 1 Replies
View Related
Feb 25, 2013
I live in a dorm where internet is provided through a router that is pretty much encased in a metallic box on the side of the wall. At the beginning of the year, my parents bought me an extremely long ethernet cable ( about 15 feet I'm guessing). I have been using this ethernet cord with no problems up until now. I find it difficult to maintain the long cord as it gets tangled everywhere and I switch it between my laptop and my xbox (I can't get a switch to work). After prolonged switching between the xbox and the laptop the little tab thing that you push broke off and the cable starts to slide and disconnects me from the internet. I decided to get another ethernet cable and I tried connecting it but my laptop does not detect the cable and I do not see any lights turn on like my other ethernet.
View 1 Replies
View Related
Feb 9, 2012
when i unplug the computer it nice and bright but when i plug it back in it goes dim
View 1 Replies
View Related
Mar 6, 2012
My DIR-825 stays on even when I flick the power switch, for as long as I don't disconnect the externally powered Belkin USB hub from it. Some lights do come off, Internet light turns orange, but it stays on. If I disconnect the hub before trying to shut down the router, it turns off instantly.
I feel slightly worried by this because as far as I am aware, a USB client device shouldn't be feeding power to the host. On the other hand, the host shouldn't be accepting power from the client either.
Also, sometimes after days since last reboot, the USB light on the router is not on despite connected devices, and they may or may not appear in Shareport.
View 3 Replies
View Related
Oct 2, 2010
I would like to know which patch cord should I be using between X2-10GB-SR and SFP-10G-SR.
View 5 Replies
View Related
Mar 24, 2011
I am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies
View Related
Aug 28, 2011
Is the CAB-C15-CBN - Cabinet Jumper Power Cord, 250 VAC 13A, C14-C15 Connector, supported on the Cisco Catalyst 3750X/3560X. I need to plug the switches into a UPS PDU, that requires a C14 plug.
View 2 Replies
View Related
Nov 23, 2011
I need to prepare a Bill of Material for WS-C3560G-48PS-S switch.
Whether we should go for CAB-AC-JPN - AC power cord for Japan OR CAB-AC-ACE AC power cord for Europ
View 2 Replies
View Related
Apr 3, 2012
Currently I am using 1000W power supply in Cisco 4500 and I want to upgrade to 2800W power supply.My question is
1) Whether I have to change the power cord while upgrading power supply
2)Whether power cord comes along with the Power Supply while ordering from Cisco
View 1 Replies
View Related
May 22, 2013
Using following part for outdoor mesh AP power feed:
40-ft (12.2-m) power cord (AIR-CORD-R3P-40NA=) for light pole installations in the US and Canada.
I wonder what happens when the lights turn off?
View 2 Replies
View Related
Feb 10, 2011
My pc will not pick up the internet, my iPad does through my wifi. I called my provider and they said my connection is fine, they mentioned not using a USB cable but when I take it out my wifi won't work on my iPad. My pc keeps saying not connected to the internet. I have a modem and a router, do I only need 1 maybe?
View 1 Replies
View Related
Jul 23, 2012
My computer is connected via ethernet cable. the internet works fine. But it says that I am Not Connected and that there are no connections available.I'm not sure what specs you guys would need to look at tobut just post telling me what
View 3 Replies
View Related
Feb 5, 2011
I have a HP G60-530US and i use Mozilla Firefox. My computer had froze up and i had to restart it. My wifi is working but it keeps sending me firefox cant find the server at... message. It said that the firewall or proxy could be doing it but i cant find a problem with it. My computer had just updated so i dont know if that could be the issue. My other computer is working just fine so i know its not the router. My computer has done with before but i cant remember how i fix it and if im not mistaken my computer had updated when it happen the last time, but im not 100% sure.
View 3 Replies
View Related
Feb 28, 2011
The inet was working through the router (we get it off our neighbours), now our neighbour is our grandad and he doesnt use the internet (his daughters do but they left home). So we decided to take the router around to our house because the signal would always be very weak in our house (but it worked.) So we connected an ethernet cable, that goes through the roof of both houses attics and into my room, and plugged the router in there. back in the other house, the wire is going into the modem.
So we have the modem in one house, with a big wire going to my house into the router. We turn it on and it works, for like 3 seconds then suddenly, we get the message "No internet access" and "limited internet access" on our XP and windows 7 laptops. On the windows 7 it shows a small yellow triangle symbol with an exclamation mark on the bars too.So I tried turning off firewall, and resetting router and all that, plugging it into modem (which I'm doing now) and have narrowed it down to something to do with the routers settings, because it works fine through the modem. and its nothing to do with the router being in the other house because we even brough the router back and its doing the same thing.I dont understand why something would go wrong just by unplugging the router because nothing was changed. Anyway I tried johnwills steps and here are my results from both my XP and windows 7,
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsme>IPCONFIG/ALL[code]......
View 1 Replies
View Related
Jan 17, 2011
I have uninstalled my norton,turned off my firewall....still only able to access internet in safe mode!
View 8 Replies
View Related
Aug 11, 2012
I have a computer connected by ethernet to a netgear router. >Today it has decided it doesn't want to connect to the internet.When I try to connect it justs tells me it can't find the server.
View 6 Replies
View Related
Aug 3, 2011
I'm inclined to think this is a bad router but just wanted to run it by everyone. All of a sudden I can't get into the router interface or ping it, but the internet still works. If I power cycle the router, then I can get back into it.
View 2 Replies
View Related
Nov 15, 2011
I'm visiting my friend at her apartment and her internet only works through an ethernet cable. I unplugged the cable from her computer and plugged it into mine and it worked perfectly but when we switched it back to her computer her internet takes forever to identify and ends with local only connection how do we fix her computer?
View 1 Replies
View Related
Dec 20, 2011
I've just got my first ever router from talktalk, DSL 2780 which works fine but I still can't connect to the internet. I called the helpline and they checked my broadband connection is working fine and all the cables are correctly connected.Then she got me to open Internet Explorer and type in 192.168.1.1 but it brought up a page saying that it couldn't be displayed and there was no internet connection, so she told me to make sure the Work Offline option wasn't ticked and did something else in Tools Internet Options and then typed those numbers again but it still didn't work.
View 3 Replies
View Related
Dec 10, 2012
I have tried everything to find out what is blocking my internet connection from working in regular mode for more than 30 seconds. My internet connection works just fine when i boot in Safe mode with networking and thats it.what is blocking my internet connection on my computer! here's my hijack logfile if you need to look at it Running processes:
C:WINXPSystem32smss.exe
C:WINXPsystem32winlogon.exe
C:WINXPsystem32services.exe
C:WINXPsystem32lsass.exe
C:WINXPsystem32svchost.exe
[code].....
View 10 Replies
View Related