the customer has a problem with LMS 3.2. This software doesn't terminate ssh sessions created by LMS on ACE. All ssh sessions still exist on ACE, so no new ssh session can be created until the administrator manually clear these session on ACE.
View 7 RepliesEarlier we had same problem with LMS 3.2
(RME-Admin-Config Management- Fetch Interval) from 180s 420s.
Now after LMS upgrade ( 4.2.2 ) the SSH sessions are stucked on ACE. We had not experienced it with 4.2.1
[code]....
we use an asa5520 like vpn termination point, asa uses acs5.3 for authentication purpose, and all seems to work properly,but acs5.3 doesn't purge user sessions when vpns terminate; I can see many user "logged-in" into menu System Administration --> Users --> Purge User Sessions; this is a problem, because we have configured max session per user how can avoid this problem? is there any new configuration to implement into asa?
we need to configure max session per user, but there is only a global option applyed to all users.how can we configure user accounting? we need to know how long a user is connected via vpn session.
Whenever it comes time to terminate Cat6 lines into an RJ-45 connector, there is an expected way of lining up the colors in each end. This differs somewhat between Cat5 and Cat6 but the principle remains the same: there is a standard order in which to feed the wires into the connector.
My question is, why is this order used? Is there a specific reason why it is done this way? The way I see it, since all 8 wires inside the cable are the same, it shouldn't matter which order you use, as long as it is the same on both ends...
I have a module of HWIC-4ESW installed into Cisco 2811 router where 3 WAN link is terminited. Suddently WAN links stopped working from last night. I have performed shutdown and no shutdown in the interface but still the the WAN link was not working. After performing a reboot the WAN link started working. No error logs were generated while the WAN link was down.
View 4 Replies View RelatedVPN client 5.0.07.0410 on Windows Vista sp2 when I try to connect to my cisco 851.Secure VPN connection terminated locally by the client Reason 412 The remote peer is no longer responding.I turned on debug crypto isakmp and debug crypto ipsec no information displayed on the console.I was a lot futher before but now do not know where to turn.
View 3 Replies View RelatedYesterday I updated an adobe flash and it installed McAfee Security Scan Plus on my computer. My wife used my computer to access her work email and gmail. This morning I woke up and uninstalled McAfee and now my internet is not working. Seems I am still connected to the network and all other computers connect just fine to my internet, like this laptop I am using now, just not my desktop. The first thing I noticed was that bitdefender was saying "svchost.exe has been terminated because it was deemed harmful by Active Virus Control". Upon investigating this, I ran an ipconfig release and renew. Now the yellow triangle with exclamation mark is gone and my Wireless Network Connection shows I am connected "with internet" however, I cannot use the internet. Even my weather gadget does not work.I found this website and looked at some of the suggestions. Here is what I have from my what I read on a solved thread "[SOLVED]wifi connected but no internet and unidentified network" including the three ping tests. [code]
View 3 Replies View RelatedI have a Pix 515E with a VPN setup. I recently tried to connect Cisco VPN Client and get the following error: "Secure VPN Connection terminated locally by the client. Reason 412: The remote peer is no longer responding" I have previously been able to connect to this VPN using Cisco VPN Client without issue. Below is a copy of my config and VPN Client log & debug logs from Pix. We have Newwave Communications Cable internet, which i just found out the the ISP has recently implemented DOCSIS 3.0. (i'm not sure if that matters).
*******************************************************************************************************************************************
pix1(config)# sh run
: Saved
:
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
[code]....
Dcom server launcher service terminated unexpectedly,This error messgae received whenever iconnect to internet.
View 1 Replies View Relatedi just bought and installed tp link wireless G usb adapter TL-wn422G.
i was tring to connect to the internet but after about 30 second the connection to the internet was terminated, and i need to unplug the device and replug it , in order it will work again (for about 30 seconds more).
i have an edimax router and all my other devices are connect perfectly (laptop, iphone , galaxy s)
I want to prioritize egress voice traffic across a trunk terminated on an F1 module, N7K-F132XP-15. I am unsure about the setup; according to the "show interface capabilities" F1 interfaces support 8 egress queues, while the Nexus QoS documentation provides configuration referencing 4 queues. In addition, I am not clear about the relevance of network-qos on F1 queueing setup.
View 1 Replies View RelatedI replaced a similar router from a competing company with the AC900 N900 router. I open Live Mail (IMAP) and keep it open during the day. Since switching over, when I periodically look at email on Live Mail, I frequently get a "Windows Live Mail" message saying "Your server unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity." I have never received this message from either one of the previous routers - LinkSys, Netgear.
View 7 Replies View RelatedI have an issue with LMS not terminating SSH sessions on the Cisco ACE?
Cisco LMS 3.2
Cisco ACE A2(3.3)
What is the maximum allowed number of BGP sessions on Cisco platforms sup720 BXL and 7200 G2? Particulaty what are these numbers if BGP sessions are under MPLS vrf (i.e. maximum number of BGP session per vrf?).
View 2 Replies View RelatedI've got a problem with an ASR1004 running "asr1000rp2-adventerprisek9.03.02.00.S.151-1.S.bin".
When I'm performing extended ping tests using a tclsh script i'm geting this error message:
ASR_X1A2#ping 172.27.1.250
% Authorization failed.
When i'm pinging 12 diffrent destinations this happens to about 3 of them.
Checking the logs I found this:
Apr 24 19:42:56.071: %SSH-4-SSH2_UNEXPECTED_MSG: Unexpected message type has arrived. Terminating the connection
In my entire backbone this is happening only in this equipment, I've checked the connection between my ASR and the TACACS and it's OK, no packet loss. CPU and MEM are OK too.
Cisco Works (LMS 3,2) is not closing SSH sessions to a Cisco ACE module, I see the following thread and tried the workaround to no avail.
[URL]
I have also seen the following caveat (CSCtz42393) but this seems to be LMS 4.x, would this be 4.x and below or do I need to find the equivalent LMS 3.2
Router is running with IOS 12.4(24T) and we are having problems like file download stalls, some emails not being send or received. CBAC is enabled on this router with default values. MTU is also the default value. This problem has started all of a sudden. seeing lot of errors in the logs as below:
Oct 27 16:47:52: %FW-6-DROP_PKT: Dropping smtp session X.X.X.X:4443 Y.Y.Y.Y:25 due to Stray Segment with ip ident 25800 tcpflags 0x5014 seq.no 288975356 ack 3363647737*Oct 27 16:48:31: %FW-6-DROP_PKT: Dropping http session X.X.X.X:2020 Y.Y.Y.Y:80 due to Stray Segment with ip ident 1472 tcpflags 0x5011 seq.no 2686554796 ack 4275837539
Someone told me the commands, but I can't remember them. Have a router (2801) at the end of a highly utilized T1 link/router. How do I protect it so my SSH and/or Telnet sessions will get serviced if the router is real busy.
View 9 Replies View Relatedwhile traversing through Cicso ASA Firewall 5520,VPN sessions are disconnecting.In Accelissts for VPN-Outbound traffic from LAN to Client VPN ,we have allowed all Ports.Is there any inspection Rules are cause for this issue. In ASA Firewall,presently the inspection rules are [code]
View 1 Replies View RelatedWe are using ACS 5.1 in our network. We have created users and grouped them as per the requirements. We want to restrict the user sessions in the network. A user should authenticate and able to access a network resource. But when he is active with that session, we need to block him from another successful authentication. We want to avoid multiple users using same user credentials for logging into the devices. whether this can be achieved by making configuration changes in ACS.
View 2 Replies View RelatedI have the default license for a ASA 5505 and this last Friday I received the attached log for SSH sessions through this firewall; we want to be clear about this issue. This limitation has to be with the 10 Inside Host or the Total VPN Peers limitations in this license? This firewall exists only to agree with a PCI requirement between our router and a communication with a Payment Card Industry Brand, all of this in the same site.
ASA5505 <164>Sep 09 2011 10:42:08: %ASA-4-450001: Deny traffic for protocol 6 src DMZ:X.X.X.X/2479 dst DMZ1:X.X.X.X/22, licensed host limit of 10 exceeded.
I hope that the communications through 22 TCP port, are not countable for license propose.
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : 10
Failover : Disabled
VPN-DES : Enabled
[code]....
I am curious of the max supported SIP sessionf of the SRP500 series.
View 1 Replies View RelatedI've looked at the forum posts and the document post, and I understand the explanations. My question is, under system administration>max user session global settings, would setting a timeout (say 1 hour) purge these sessions?
Under access policies, I am not enforcing max concurrent sessions per user, due to some of our devices using a generic log in. But if I understand the explanation, and my understanding might be wrong, then setting an expiry timeout should purge the accounting sessions, right?
I have DSL line that gives 7mb down and 768k up. I have 2 users running win7 RDP session and after a few hours the session is unusable its so slow and then eventually it hangs . don't know where to start.
View 1 Replies View RelatedI am having a recurring problem with tcp sessions timing out / getting reset. I'm using the DIR-655 with PPPoE on a Qwest DSL line. Everything appears to be working fine (including my ipv6 tunnel) except for this issue where my long running ssh & database connections are being reset after a period of time.Currently have 2.03NA loaded, tried using 2.07NA but couldn't get ipv6 working correctly with the newer version.
View 7 Replies View RelatedIn our organization ,recently we are facing a issue with VPN connections are disconnecting abruptly in reandom time periods ( 5Min,15Min,1Hr also).We have verified in our SysLog .[code] The same was worked well in Cisco Pix 515E Firewall ,After changed to Cisco ASA 5520,it is giving the issue.- All Ports are allowed for outbound traffic with a Source Network 172.16.40.0/24 to their Client VPN.- This issue is giving for other Subnet Users i.e 172.16.33.0/24 to their Cleint VPN sessions & I allowed all Ports for them for Outbound traffic. Any feature in ASA is casuing for terminating the sessions which was not in Cisco PIX 515E.- ASA version is 8.0.
View 2 Replies View RelatedI have a issue with 1142n.If I start from 15 sessions per AP then it becomes a very costly affair. Because there are almost 20.000 student.20,000 students * 60% concurrent use divided by 15 = 800 APs.what is a realistic number of sessions on this AP? What is max concurrent connections on this AP?
View 9 Replies View RelatedWe are using ACS 5.1 and from time to time we are getting a warning saying that the active sessions are over the limit (250000). It is just a warning, so my assumption is that its not a big deal, but how do we keep from getting the event, or prevent the event?
View 2 Replies View RelatedI have upgraded my ASA 5520 til version 9.1 with ASDM version 7.1. After the upgrade ASDM shows a lot of IPSEC VPN-sessions in the GUI that i cannot see from the ASA. Right now the GUI says that I have 28 IPSEC-sessions while the output from "show vpn-sessiondb l2l" shows the expected 4 tunnels and the output from "show vpn-sessiopndb remote" shows 0 as expected. (I do not use IPSEC from remote users).
View 3 Replies View Relatedhow many sessions a BGP Route Reflector can support? is it 10, 100 or 1000 BGP sessions? What degradation of performance may arise in the case of a BGP RR sessions overload? Consider that the RR I'm deal with has both the control plane and teh forwarding plane. Which command I may use for get the output about BGP sessions resurces used level?
The following are the data about the RR:
Cisco 7600
WS-SUP720-3BXL
Version 12.2(33)SRD5
cisco CISCO7609 (R7000) processor (revision 1.2) with 983008K/65536K
We have a new 2911 that needs to be configured, unfortunately it's at a remote site. I had installed the following config: [code]
Now, I do get a dhcp ip on the G0/0 interface and I can ping it from my remote network and the local router as well as the local lan. The hands and eye guy is able to telnet from the local lan but I am unable to telnet from either my remote lan or the local router.The only error I receive is "connection refused by remote host". All lines are clear so I have no conflicts with multiple telnet sessions.
There is a page in the DIR-825 that logs your computers IP and the other IPs it is connecting to. I was wondering if there was a way to disable that function on select devices? My handhelds and legitimate computers that should be on the internet are filling it with spam and it is hard to check for unauthorized users on the network. If that is not possible, then would I be able to completely disable the feature?
View 1 Replies View RelatedI have recently installed four Cisco RV042 v3 VPN routers for a customer of ours to replace existing Nortel Contivity 1010 devices which were providing VPN tunnels from the customer's 3 branches to their headoffice. The original Nortel devices were working perfectly but the customer wanted some firewall rule changes and the Nortels were proving to be somewhat inflexible and incomprehensible in their configuration hence why they were replaced.
When installing the Cisco routers I configured the VPN settings to match the Nortel device settings so that I could swap out a branch at a time without taking the whole setup down for a day.The customer has a Unix based dumb-terminal application running on a server at headoffice that they access from their branches using terminal emulators on Windows PCs and thin client hardware devices that support vt100 terminal emulation.
Prior to installing the Cisco RV042's everything was working fine. Now they are using the RV042's they keep getting the sessions from their branches dropped. Both PC users and thin client users are losing sessions and it happens with active and idle sessions. I have checked the logs on the routers when users are disconnected and there is nothing logged at that time (other than my login)... I had thought maybe it was to do with tunnel renegotioations so I have set to phase 1 / phase 2 SA timeouts to 86400 & 28800 seconds respectively but this has had no effect. I had also seen somebody advised disabling 'SPI' in the firewall... I have tried this and it makes no difference.