i'am using csm 4.1 and i have configured the keep audit log for 30 days and the entries becomes older than the number of days specified in the keep audit log without deleting, i don't understand why this happend and how can i make shur that the purge is done. if the purge is automaticaly or i have to delete the oldest entries by my self.
View 3 Repliesi'am using csm 4.1 and i have configured the keep audit log for 30 days and the entries becomes older than the number of days specified in the keep audit log without deleting, i don't understand why this happend and how can i make shur that the purge is done.
if the purge is automaticaly or i have to delete the oldest entries by my self.
Save and reset button is not working on Sys log Purge Settings page (Admin > Network > Purge Settings > Sys log Purge Settings) when Email: field is not empty. An Reset button is not working at all.This is the Cisco Prime LMS 4.2.1.
Is it only my LMS server or you all have this bug?
we use an asa5520 like vpn termination point, asa uses acs5.3 for authentication purpose, and all seems to work properly,but acs5.3 doesn't purge user sessions when vpns terminate; I can see many user "logged-in" into menu System Administration --> Users --> Purge User Sessions; this is a problem, because we have configured max session per user how can avoid this problem? is there any new configuration to implement into asa?
we need to configure max session per user, but there is only a global option applyed to all users.how can we configure user accounting? we need to know how long a user is connected via vpn session.
I configured the logging parameters on my Cisco asr 1000 , but nothing was sent to my terminal monitor
logging on
logging buffered debugging
logging buffered 5
[Code].....
We have LMS 4.2 installed and added devices;Now if for example a device is not reachable we get two messages with same failure ;only the component name is different
- one event with "dns" in component name
- one with "dns(ip)" in component name
dns == hostname
I've got a a customer that is using a single sign on product that uses agents installed on the customer's domain controllers. This works fine accept for one scenario. When the customer transitions from a wired to wireless connection or vice versa. We have determined the reason for this is that the DCs are not getting Windows logon events ie 540 on 2003 servers or 4624 on 2008+. The users have files shares mapped onto member servers but refreshing those is not hitting the DCs.
Any way to ensure hitting a domain resource generates a logon event on a DC without directly mapping a resource on a DC. If it matters there are 50 domain controllers and around 200 member servers spread all over 48 states.
How do you monitor ASA firewall fail over events?
We had a firewall fail over, didn't know it, the configs were out of sync and the customer went down we want to avoid this is the future.
I read in the Cisco IOS ASA documentation (8.x) that some group-policy attribues are only available for soft-VPN clients while some are available for both soft-VPN clients and L2L VPN clients. Cisco didn't clearly specify which attributes were available for which clients.
To aid me in troubleshooting my L2L VPN setup could someone indicate if the order of events (listed below) is correct for ASA 5520 with IOS 8.x and if the attributes selected are available for L2L VPN clients?Also, are there "show" commands to reveal more details about tunnel-groups, group-policy, etc. when used with VPNs?
I've just installed LMS 4.2, like it a lot so far. In the Fault Monitor, the Device Name column shows the device's IP address rather than the host name. We need for it to show the host name, for ease of troubleshooting; most folks don't have the IP addresses memorized. Likewise, when an email is sent out for an event, the managed device field also shows up as the device's IP address.
The devices were all discovered with their IP addresses rather than a host name...should LMS have automatically found their host names? Regardless, I manually updated all of the device's host names, yet they still display as an IP address in the fault monitor.
Also, it appears I need to figure out some way to throttle alerts. One particular device will report an event (ie a temperature out of range) dozens of times in a polling period...several per second, even though it's the same alert.
What I want to do is be able to control my PC from my TV screen. I mean I want to be able to stream a live ball game or movie I have on my PC hard drive & see it on my TV. I heard about Roku & thought that is what I wanted or Blueray with DLNA. But Roku just pulls streams from subscriber sites like Netflix & Hulu. DLNA will allow you to view video you have on your HDD but will not let you stream live feeds like watching a live event that is streaming on your PC. Is there any hardware out there that will allow me to have whats on my PC screen on my TV screen via wifi (or other means)?
View 2 Replies View RelatedI faced with strange behavior of Cisco 2901.I strat ospf process on router, do some ospf manipulations and than turn off ospf with
R1(config)#no router ospf 1
But after that when I start to change my config: shut/no shut interfaces I see OSPF debug messages
R1(config-fr-dlci)#interface Serial0/0/0.5 point-to-point
R1(config-subif)#sh
R1(config-subif)#
Jul 5 12:33:13.004: OSPF EVENT Se0/0/0.5: Route adjust
R1(config-subif)#
R1(config-subif)#
R1#sh
Jul 5 12:34:15.076: %SYS-5-CONFIG_I: Configured from console by consoleip pro
R1#sh ip protocols
*** IP Routing is NSF aware ***
How it can be? Thereis no OPSF process on R1.
I've just taken over a new network with a Cisco ASA5520. Everything is working fine, except I am being bombarded with 106001 alerts from a few internal hosts to one specific internal host. The description in general is "Inbound TCP connection denied from 10.1.0.1 to 10.1.0.5 - both of those are valid internal hosts and the TCP ports are also valid. I tried looking at the log and getting it me to tell me which rule was causing these alerts, but it just came back with 'It's not possible for these type of alerts'
- How is it possible for the ASA to even pick up on this when, in theory, the source host wouldn't be going near the ASA since it's on the same subnet?
- What might be causing this?
- How can I turn it off!! (I guess that'd be fixed by point 2)
I have a Cisco ACS 5.1 virtual appliance which has been working fine, I have however just discovered that it is now unable to provide me with any logs. TACACS authentication is still working without any issues, the only problem I have is viewing the logs.
View 6 Replies View RelatedI am new to Cisco Nexus 7000 Series NX-OS System of appliances. I am looking for type of log events that are getting generated by CISCO Nexus 7000 switches. Some documents which give me this references & some documents which have a log line explained.
View 4 Replies View RelatedI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedI just got my ea4500. the 50 Mbs from Comcast was killing my old wrt54gl. the thing where cisco connect and access thru the web interface step on each other, or when the web interface does not expose all the settings is annoying. because i didn't want a guest network, i had to go back to Cisco connect. and things did not work well. i ended up re-doing the whole thing, because i did not want a guest network and wanted diff settings for 2.4 and 5 Ghz.and logging after so many years and Linksys still does not include a date/time stamp for the events. logs without date/time are not very useful.
View 6 Replies View RelatedAdd the ability to send syslog events to multiple syslog servers in the SA500 Series routers. I know the functionality is currently in the RV220W because we utilized it. It would be great if you could configure the syslog servers by event type as well. For example, being able to send the kernel events to syslog server A, and all other events to syslog server B.
View 0 Replies View RelatedWe are using HPUX server to collect files from switch to our server. Our server connect to cisco router and the cisco connect to X.25 protocol to communicate with switch. My question, how could i collect files from swicthes to our server and what is the command can i used ?.
This is some info about router.
'Serial0/0/0 is up, line protocol is up
Hardware is GT96K Serial
Description: LL018766
MTU 1500 bytes, BW 1544 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
[code].....
i have more than 8 month when i install CSM 4.1 i haven't any problem with using CSM 4.1 but now i want to know how can i archive logs files and before purging and how can i saving reports and events to an external disc
View 0 Replies View RelatedI have a pair of NAM (WS-SVC-NAM-2) blades in my CAT65.I have been instructed to upgrade my NAM from application version 5.0 to 5.1.1?
The TAC engineer also said that I should upgrade my maintainence software from 2.1(5) to a newer version. He did not say which maintainence version I should upgrade to.
I am having a problem locating the software on CCO. provide me with a link so to the space where these files are hosted (NAM application & maintainence software) ?
We running ACS 5.2.x and need to collect the below log file:
var/log/ade/ADE.log
I know this should be taken while loging to ADE/Linux root, but I'm remember how to loging as I havent created and service account (as IPS).
I have my Win 7 pc networked to my host XP desktop. They see each other. I set them to share. Now when i pick a certain file, in this case on my XP host, I right click it and choose Share and security box. Looking at my Win 7 pc, i do not see it.
View 5 Replies View RelatedWhere I can find the MIB files for RV220W router?
View 2 Replies View RelatedI am having problems with the RVS4000 ver 1. I cannot download files from the web. Firmware is up to date. As an example, if I try to download from pdf995's site, I get a "page cannot be displayed error. If I try to download current files for my flight planning software (like charts, etc.), the download hangs and never completes. I have bypassed the RVS4000 and connected directly to the broadband router and there are no problems. We have a 15MB cable connection.Follow-up - It appears the issue is file size. At pdf995's site, downloading a 2.5MB file works, but the 9 MB file does not. The file sizes for the flight planning software are rather large - 100-200 MB, and they hang as well. Connecting directly to the cable router does not cause this problem. The RVS4000 is set for Gateway mode.
View 6 Replies View RelatedI installed ise-1.1.1.268.i386.iso on a scratch to the new NAC 3315. As i check cisco download mentioned it need to patch following files :ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz,But once try to patch it show like attachment message, is it mean that i no need to do the patching?Or is there any instruction need to remove and reinstall for this files.
View 4 Replies View RelatedDuring installation of CM 5.1.4 on Windows 2003 Enterprise Server, I get popup windows "Stop All Programs". I checked Windows Service console but have been unable to determine which processes may be holding these files.
[code]....
Hope u all fine and doing well, Everything i donwload at end it's crrupt After download finished when opining files Files Crrupt Error.
View 3 Replies View Relatedhow to share files with two different networks, one networking is in ptcl dsl router, second is in tenda wifi router, so how to enable sharing files with these two networking
View 1 Replies View RelatedI want to keep my documents on my XP SP2 machine, but be able to edit them from a windows 7 laptop. Points so far:1. I can print from windows 7 to XP OK.2. Before I re-installed XP this was working fine.3. The workgroups match4. I can see the XP files on the windows 7 machine5. When I click on an XP file on the windows 7 machine, it goes very slowly, then gives a "Not Accessible" error.6. I have not used passwords to set this up.
View 3 Replies View RelatedI have 50GB storage on box.com and DropBox.So i just want to back up my files there.Web interface just sucks and offers no customization.Their desktop programs are only to sync, and dont do much to just upload.I dont wanna sync folders, i just want to upload files!
View 13 Replies View RelatedI know this is sort of a stupid question, but I just spent over an hour with a Microsoft Tech Support guy who had absolutely no clue what he was doing. He frequently paused for five minute intervals to "confer with his resources" (I suspect he was reading an outline that told him what to do), and every time I explained that an issue did not work precisely as he expected, he had to put me on hold and talk to someone else. It was hellishly aggravating
View 1 Replies View RelatedI was wondering what settings need to be set, and what needs to be done on both computes, i have Printer sharing up and running with no problems but i can't seem to get my mac to be detected on my main Windows 7 PC. I am able to connect to my Windows 7 PC but can't seem to get my mac to show up. Also i have connected it to the Windows 7 workgroup and still nothing.
View 2 Replies View Related