During installation of CM 5.1.4 on Windows 2003 Enterprise Server, I get popup windows "Stop All Programs". I checked Windows Service console but have been unable to determine which processes may be holding these files.
[code]....
I have a Linksys wusb54gc, after downloading driver and install, system performance changed. Tried several fixes suggested at another site which failed Cannot delete (access denied) Trying to remove through control panel error "critical file missing" win xp os. Would like for this to work as it had on the computer it was originally purchased for. "gina.dll" interferes with the os.
View 2 Replies View RelatedI ran the firmware upgrade and hit the reset button for 30 seconds and everything went well until I went to restore my personal settings. When I went to the router page it asked for a user name and password but the old user name and password don't work so I am locked out and can't get to the restore page.
View 3 Replies View RelatedHow can I install cache server for caching downloaded files ?
I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8)
I have a pair of NAM (WS-SVC-NAM-2) blades in my CAT65.I have been instructed to upgrade my NAM from application version 5.0 to 5.1.1?
The TAC engineer also said that I should upgrade my maintainence software from 2.1(5) to a newer version. He did not say which maintainence version I should upgrade to.
I am having a problem locating the software on CCO. provide me with a link so to the space where these files are hosted (NAM application & maintainence software) ?
After ACS upgrade from 5.2 to 5.3 we have noticed that backup files are significantly smaller in size. For example before the upgrade they were:
285633099 2011-10-23 22:01 Meduza-ACS-111023-2200.tar.gpg
285809254 2011-10-24 22:01 Meduza-ACS-111024-2200.tar.gpg
And after upgrade:
124234429 2011-10-25 22:00 Meduza-ACS-111025-2200.tar.gpg
124234425 2011-10-26 22:00 Meduza-ACS-111026-2200.tar.gpg
What could cause this behavior? How we can be sure if backup files have been regular after the upgrade?
I have an ISE 3395 appliance that comes with ISE version 1.1.1.I've decided to upgrade it to version 1.1.2 patch 5 (latest patch version) and played with it for a few days. I set it up as a stand-alone box.
Now, I need to deploy this box as administration and monitoring. So, I put in the command "application reset-factory" to set it back to factory.Does it mean the ISE version of this box will still be at version 1.1.2 patch 5 and I will get a clean box to do whatever I want, similar to Cisco IOS of "write erase" and "reload" to have a clean box?
We face following situation: Currently LMS 3.2 is installed. We order a 3.x to 4.0.1 upgrade license, in the meantime 4.1 is launched. So, we ordered the free of charge 4.0 to 4.1 minor upgrade license. Now we have a 3.x to 4.0 upgrade license and the 4.0 to 4.1 minor upgrade license and don't know how to proceed.
Is it now possible to install 4.1 from scratch directly and use the 4.0 to 4.1 upgrade license to register it? Of course we want to avoid to install 4.0 as an extra step...
I have downloaded the ros file, but can't find how to apply it. I know this information must be out there, but can't find it.
View 2 Replies View RelatedI am attempting to replace my actiontec router with the Cisco 871 I have little expirience with CLI-IOS so I was trying to use sdm express that failed to load and when I finally got it to load it still didnt work and I ended up getting locked out of the router it was totally unresponsive. So I did a reset and now am attempting to use the Cisco Configuration Assistant to set up my wan connection but it have been loading security related data for 15 minutes and I have a feeling it's not doing anything at all. I don't understand what I'm doing wrong.... Any advice.... I just was trying to get a default set up that would give me internet access Im not trying to enable any of the security functionality at this point.
View 0 Replies View Relatedi recently enabled bridged mode on my first router/modem and now it seems that i cannot access the configuration with the normal 192.168.0.1 address. Is there anyway i can access the configuration excluding the hard reset?
View 1 Replies View RelatedI recently re-installed Windows 7.When I try to access the network set up between my PC and Laptop I get a box requesting my name and a password.
View 6 Replies View RelatedI am a medical student and I use my college wifi to download torrent files via utorrent. Earlier they have blocked torrent sites, So... I use to download the torrent address via my 3G Dongle and then open it in the utorrent to download the whole file ( 4 GB or 8 GB size). The WiFi provides about 1-2 Mbps speed and the files ude to download very easily . But, now along with the blocked site , ... the utorrent is not catching speed.
View 4 Replies View RelatedI had a custom device/computer on my network that was hacked from hong kong. It's one of those things where I seriously think the chinese have built a back door into it when they built it or something because everything was secured and monitored.The device runs it own OS or something like that I guess you could say. It can also run it in standalone mode broadcasting it's own signal. Once I figure this out I may not put it online anymore but thats besides the point right now. When it was hacked I'm pretty sure the port it uses to connect was changed from 80 to 591. When it runs in standalone mode I can connect to it but I am unable to actually access it's proprietary graphic network interface. It sends out UDP every few seconds or so and basically I was trying to search for some type of udp broadcast monitor and have tried using network tools such as netstat, port scanning, multicast, etc on all of the big three OS's because sometimes it seemed to finnicky what it wants to connect to. I've tried to let it connect back to my router again which it seems to do, but is then denied access and I think it may even have a trojan or somethng so I don't want it to that but if I have to to access it again I will.In standalone mode I've it usually trys to connect on 192...5 or 192...7 and I've tried to get through 591, 23, 80 etc. multiple times with no luck.
View 11 Replies View RelatedMy WRT54G Linksys router works with wifi and local connection but it wont let me configure to change it to PPpoe nor wont let me enable a wireless connection, so it's open to the public how do i get it to open it resetting it and holding the button on the router for 30 secs.
View 1 Replies View RelatedI have a computer through my old school and i still cant get into the main part of the computer to change my password etc; How do i unblock it?when i click it, it says; please contact system administration but i cant and they wont tell me.
View 1 Replies View RelatedI set my router to allow my xbox360's mac address, not knowing that it would kick out all of my other devices. So now I can't access my own router and I need to reset it. How do I do that?E1200 series linksys router. I'm looking for an ethernet cable and my installation disk right now to see if I can connect with the cable and maybe use something on the disk if I have to.
View 1 Replies View RelatedWe are using ASA5520 as our VPN concentrator and has configured IPSec authentication using digital certificates with Microsoft CA for the remote access VPN. The AAA server used for remote user authentication is Windows Active Directory. Screenshot of the AAA configuration is attached. The problem we face is that the "Login DN" account (marked in red box in the screenshot) is frequently getting locked out in the active directory. I have confirmed that the password is the same on both ends and the account is not used any where else.
The NTP server configured for the VPN concentrator is the Active Directory itself but no accounts are configured (not required) for updating the time service in the concentrator.
I've been using the trial version of a product called Folder Lock on another computer than the one I'm using right now to type this message. I got a little too enthusiastic about locking away folders into Folder Lock on that other computer, and I think I locked away Folder Lock itself.In the past (before this problem developed), when I clicked a Folder Lock icon, it used to prompt me for the Folder Lock password, which I would then input, and then Folder Lock would open, and I could lock and unlock folders. But the problem is that now I don't get prompted for the Folder Lock password. I get a message (from Folder Lock) that says, roughly, "you may not have permissions to carry out that action." So even though I have the Folder Lock password, I can't open Folder Lock, because it won't prompt me for the password, and just says I don't have permissions.I also locked into Folder Lock my downloads folder on that computer, and apparently folders or icons that used to allow me to access the internet on that computer. I can no longer access internet from that computer.I'm wondering how I can get Folder Lock to prompt me for the password, so I can open Folder Lock. I would like to unlock all the folders I locked -- including if I locked Folder Lock itself! I locked away a lot of my important stuff. I wonder if I should do a system restore to a date before I installed Folder Lock, but I wonder if the system restore might fail to delete Folder Lock, because Folder Lock might prevent its own deletion. I have Folder Lock 7. I have Windows 7.
View 3 Replies View RelatedMy wife and I Security Enabled our wireless network several months ago.We recently moved, and after transferring Internet service, we realized we'd lost our passkey.My wife's laptop has, after one failed attempt to connect to the network, refused to even show the network as an available connection.We currently have the router set to broadcast SSID.We have restored factory settings on the router and completely revamped the security setup.We've removed all other networks in the area as optional connections on her computer.We also replaced the ethernet cord to my desktop because the old one started erratically disconnecting.Nothing's worked.My wife's computer is a Dell laptop using Windows Vista.
View 6 Replies View RelatedI have installed a SumvisionSWV322P Wireless PCI Adapter in to my desktop and have configured it to run on my existing home network: I can connect no problem but after about 10 mins my whole desktop just locks up: The only way I can get out of this is by re-booting by turning the machine off completely by the on/off button. My OS is Windows XP Professional version 2002 SP3:
View 1 Replies View RelatedI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedI am currently running cisco ACS 5.1.0.44 and use active directory as the main authentication identity store to allow network administrators to have access to network devices in my organization .As per the established security policies in my organization , the ACS has to disable any account after 3 failed login attempts to any network devices .i have gone through all the settings oN the acs but couldn't find where or how it is done .
View 3 Replies View RelatedI am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
View 1 Replies View RelatedI have two Windows 7 computers and neither one will successfully upgrade a 1242 AP to LWAP. However, I go to a coworker's XP machine and run the tool without issues. On Windows 7 I keep receiving the error message of ACL or Firewall is blocking. I have added rules and then even tried disabling the firewalls completely on both computers and still no success.
View 7 Replies View RelatedI am facing a problem to install a ap upgrade lic file on controller 5500. Iam getting the following error:
% Error: License file transfer failed - Error from server: File not found
I have confusion here that when I configure this command from GUI
tftp://172.32.45.22/cmm/standard.lic
What i should use for /cmm/ ????
Let say i have lic. file is on desktop of tftp server computer and I say in this command
tftp://10.12.70.35/??/license file .lic
Is it possible to upgrade the CSACS-1121-UP-K9 to be a non upgrade part? We were going to upgrade from a Windows 4.x to the above Appliance (version 5.x) but there is now a reason to keep the old Windows version running therefore we cannot give the new Appliance the old ACS's licenses?!So we should have (with hindsight) bought a fresh version of the ACS 5.x rather than an upgrade.
View 1 Replies View RelatedWe are using HPUX server to collect files from switch to our server. Our server connect to cisco router and the cisco connect to X.25 protocol to communicate with switch. My question, how could i collect files from swicthes to our server and what is the command can i used ?.
This is some info about router.
'Serial0/0/0 is up, line protocol is up
Hardware is GT96K Serial
Description: LL018766
MTU 1500 bytes, BW 1544 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
[code].....
i have more than 8 month when i install CSM 4.1 i haven't any problem with using CSM 4.1 but now i want to know how can i archive logs files and before purging and how can i saving reports and events to an external disc
View 0 Replies View Relatedi'am using csm 4.1 and i have configured the keep audit log for 30 days and the entries becomes older than the number of days specified in the keep audit log without deleting, i don't understand why this happend and how can i make shur that the purge is done. if the purge is automaticaly or i have to delete the oldest entries by my self.
View 3 Replies View RelatedWe running ACS 5.2.x and need to collect the below log file:
var/log/ade/ADE.log
I know this should be taken while loging to ADE/Linux root, but I'm remember how to loging as I havent created and service account (as IPS).
I have my Win 7 pc networked to my host XP desktop. They see each other. I set them to share. Now when i pick a certain file, in this case on my XP host, I right click it and choose Share and security box. Looking at my Win 7 pc, i do not see it.
View 5 Replies View RelatedWhere I can find the MIB files for RV220W router?
View 2 Replies View Related