We running ACS 5.2.x and need to collect the below log file:
var/log/ade/ADE.log
I know this should be taken while loging to ADE/Linux root, but I'm remember how to loging as I havent created and service account (as IPS).
ACE is configured to point accounting to ACS servers but ACS servers are not seeing all the accounting logs. I can only see accounting logs from ACE for watchdog, start and stop.
View 5 Replies View Relatedvlan.dat file fetch.
I'm using Cisco Prime 4.2 and VLAN fetch for all devices is currently going over TFTP. Devices managed by LMS are 2960, 4500, 6500 series. All devices are using SSH v2. ACS server is configured on all devices and SSH credentials are OK.
This is the error message I get when i select SCP: "SCP user credentials not available. Configure the SCP user credentials and try again Action: Check if protocol is supported by device and required device package is installed."
Is it possible to use SCP as VLAN fetch protocol? How to configure this on a devices and how to enter SCP credentials in LMS?
I am using Cisco Works LMS 4.0 for collecting configurations of the devices. After changing the configuration of the device what is the minimum time that LMS detects the configuration was changed and save (make archive) the new configuration in the LMS database ? (Periodic Collection and Polling are disabled). Which mechanism drive this process, SNMP Trap?
View 4 Replies View RelatedWe are using Cisco Works LMS 4.0.1. Acquisition info reports last acquisition end time 19 July and Campus data collection running. Number of host entries is 68 but we have two thousands PCs. When we try to perform an acquisition action with scope all hosts and users, we receive this message;
Failed to start acquisition: Construction of XML data required for UT is in progress.Please try after some time.
Cisco ACS 5.2 secondary server is configured as a log collector for both primary and secondary server .Now i am facing problem in log collection from primary server .ACS secondary server is not collecting any logs from primary .
View 2 Replies View RelatedIn order to do a flash upgrade on a 5510, is there any way to get the files from the existing flash onto the new flash before you replace existing flash? Is there an online procedure?
View 2 Replies View RelatedI am using csc-ssm module in Cisco ASA 5520 firewall, with the csc version as 6.3.1172.0. I have a public Ftp server and when i ever i transfer the zipped files more than 50 MB or 70 MB or more than that, it fails. I used to upload by clicking the ftp site and copy past the file to the location. After a certain point of time, the download fails with the below error on the explorer.An error occured copying a file to the FTP server. Make sure tou have permission to put file on the server.Details: The operation timedout
Firewall log is below.
ABCFTP1|21|10.120.110.162|1257|Teardown TCP connection 48091783 for Internet:ABCFTP1/21 to XYZ:10.120.110.162/1257 duration 0:00:27 bytes 656 TCP FINs .
-- When i remove the service policy from the firewall, and try to transfer the files, it goes through without any problem. ena
-- Pls check the attached screenshot of the ftp settings in CSC-ssm. There is no problem with downloading files from the server.
I made an ASDM upgrade for one of my two CISCO ASA 5520. If I copy a file to the primary ASA's flash, is there any command I can run on the primary ASA to copy a file to the secondary ASA?
View 1 Replies View RelatedI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedI have pix 535 and wanted to erase the flash files (faulty) which already utilised 13 mb .so i cant upload new ios so i want erasedisk.bin ,i also have CCO account.
View 6 Replies View RelatedIs it possible to use the USB ports on a ASA5510's to copy files onto the flash?
I have not been able to find any ionfo on this in the users guides ?
When I use ASDM or the CLI to copy (ftp) files from my management station to flash on my ASA5520. I get to 99% and then the gui or cli window hangs.
The ASA itself completely freezes i.e. no traffic in or out until I kill the transfer window and then it may reboot
[and yes, there is more than enough free space on the flash file system for the files]
ASA5520 V8.2(3) / ASDM V6.4(5)
I am in the process of migrating my config from my PIX running 8.0(4) to my ASA5520 running 8.2(1). I have converted the config so that it is ready for the ASA. I noticed the "boot system flash:" and "asdm image flash:" command references the old PIX files. Do I need to update these or will they be updated when the ASA reboots with the new config?
View 2 Replies View RelatedWe are using HPUX server to collect files from switch to our server. Our server connect to cisco router and the cisco connect to X.25 protocol to communicate with switch. My question, how could i collect files from swicthes to our server and what is the command can i used ?.
This is some info about router.
'Serial0/0/0 is up, line protocol is up
Hardware is GT96K Serial
Description: LL018766
MTU 1500 bytes, BW 1544 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
[code].....
i have more than 8 month when i install CSM 4.1 i haven't any problem with using CSM 4.1 but now i want to know how can i archive logs files and before purging and how can i saving reports and events to an external disc
View 0 Replies View Relatedi'am using csm 4.1 and i have configured the keep audit log for 30 days and the entries becomes older than the number of days specified in the keep audit log without deleting, i don't understand why this happend and how can i make shur that the purge is done. if the purge is automaticaly or i have to delete the oldest entries by my self.
View 3 Replies View RelatedI have a pair of NAM (WS-SVC-NAM-2) blades in my CAT65.I have been instructed to upgrade my NAM from application version 5.0 to 5.1.1?
The TAC engineer also said that I should upgrade my maintainence software from 2.1(5) to a newer version. He did not say which maintainence version I should upgrade to.
I am having a problem locating the software on CCO. provide me with a link so to the space where these files are hosted (NAM application & maintainence software) ?
I have my Win 7 pc networked to my host XP desktop. They see each other. I set them to share. Now when i pick a certain file, in this case on my XP host, I right click it and choose Share and security box. Looking at my Win 7 pc, i do not see it.
View 5 Replies View RelatedWhere I can find the MIB files for RV220W router?
View 2 Replies View RelatedI am having problems with the RVS4000 ver 1. I cannot download files from the web. Firmware is up to date. As an example, if I try to download from pdf995's site, I get a "page cannot be displayed error. If I try to download current files for my flight planning software (like charts, etc.), the download hangs and never completes. I have bypassed the RVS4000 and connected directly to the broadband router and there are no problems. We have a 15MB cable connection.Follow-up - It appears the issue is file size. At pdf995's site, downloading a 2.5MB file works, but the 9 MB file does not. The file sizes for the flight planning software are rather large - 100-200 MB, and they hang as well. Connecting directly to the cable router does not cause this problem. The RVS4000 is set for Gateway mode.
View 6 Replies View RelatedI installed ise-1.1.1.268.i386.iso on a scratch to the new NAC 3315. As i check cisco download mentioned it need to patch following files :ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz,But once try to patch it show like attachment message, is it mean that i no need to do the patching?Or is there any instruction need to remove and reinstall for this files.
View 4 Replies View Relatedi'am using csm 4.1 and i have configured the keep audit log for 30 days and the entries becomes older than the number of days specified in the keep audit log without deleting, i don't understand why this happend and how can i make shur that the purge is done.
if the purge is automaticaly or i have to delete the oldest entries by my self.
During installation of CM 5.1.4 on Windows 2003 Enterprise Server, I get popup windows "Stop All Programs". I checked Windows Service console but have been unable to determine which processes may be holding these files.
[code]....
Hope u all fine and doing well, Everything i donwload at end it's crrupt After download finished when opining files Files Crrupt Error.
View 3 Replies View Relatedhow to share files with two different networks, one networking is in ptcl dsl router, second is in tenda wifi router, so how to enable sharing files with these two networking
View 1 Replies View RelatedI want to keep my documents on my XP SP2 machine, but be able to edit them from a windows 7 laptop. Points so far:1. I can print from windows 7 to XP OK.2. Before I re-installed XP this was working fine.3. The workgroups match4. I can see the XP files on the windows 7 machine5. When I click on an XP file on the windows 7 machine, it goes very slowly, then gives a "Not Accessible" error.6. I have not used passwords to set this up.
View 3 Replies View RelatedI have 50GB storage on box.com and DropBox.So i just want to back up my files there.Web interface just sucks and offers no customization.Their desktop programs are only to sync, and dont do much to just upload.I dont wanna sync folders, i just want to upload files!
View 13 Replies View RelatedI know this is sort of a stupid question, but I just spent over an hour with a Microsoft Tech Support guy who had absolutely no clue what he was doing. He frequently paused for five minute intervals to "confer with his resources" (I suspect he was reading an outline that told him what to do), and every time I explained that an issue did not work precisely as he expected, he had to put me on hold and talk to someone else. It was hellishly aggravating
View 1 Replies View RelatedI was wondering what settings need to be set, and what needs to be done on both computes, i have Printer sharing up and running with no problems but i can't seem to get my mac to be detected on my main Windows 7 PC. I am able to connect to my Windows 7 PC but can't seem to get my mac to show up. Also i have connected it to the Windows 7 workgroup and still nothing.
View 2 Replies View RelatedI have 3 computers in my home network: the main computer, a laptop, and an old computer used for streaming vids and pix to the TV. I recently upgrading the main computer from XP to Win7, as well as upgraded the TV computer from Win98 to XP. The laptop and main computer are fine. The problem arises when I try to access files from either the laptop or main computer from the TV computer.I've also read something about that the user name and password has to be the same on all the computers on the network, but that doesn't really make sense. The laptop and main computer don't have the same user name and they work fine. Besides, before I disabled password file sharing, I entered the proper name and password for the main computer and it still wouldn't let me connect.
View 14 Replies View RelatedI have network group set up for 5 computers and everything is okay except 1 computer, lets call it X, cant access files from computer, Y, but there arent problems with Y getting into X. On computer X a login screen pops up for computer Y password but it doesnt have a password and it still wont let me in. would it be better to set a password or is there a way to bypass that screen?
View 1 Replies View RelatedEveryone speaks about video and music streaming, however I am under the understanding that there isint actually any such thing as legitimate real time streaming, ALL files are saved to the disk or the RAM. If this was not the case, disrupting your Internet connection would cause an instantaneous crash of the streaming media, and well, I have had my Internet crash a lot of times while viewing streaming median and in every case it continued to play for some time.
View 5 Replies View Related