I am a medical student and I use my college wifi to download torrent files via utorrent. Earlier they have blocked torrent sites, So... I use to download the torrent address via my 3G Dongle and then open it in the utorrent to download the whole file ( 4 GB or 8 GB size). The WiFi provides about 1-2 Mbps speed and the files ude to download very easily . But, now along with the blocked site , ... the utorrent is not catching speed.
View 4 RepliesMy task is to plan out on how to setup a WiFi Access System in our college.There are more than 3000 users which include students, faculty, etc.Area is spread across almost 1 acre of land area.
Q1. How do I go about setting up a system where MAC based WiFi Access system is achieved?
Q2. What equipment will be needed, like routers, access points, etc.?
Q3. How many Access Points will be required, and which will be the best in terms of cost, range, speed and performance.
Q4. Which would be the best equipment for this?
Q5. User management solution?
i use college wifi.but college authority provide very slow download speed .how to increase this speed.
View 2 Replies View RelatedShe was able to connect to the Internet, wirelessly, at home and at my house without any problem. In her dorm, she cannot connect with the laptop. She can connect with her phone and her roommate can connect with her laptop, but my granddaughter's laptop will notThis is the description of her laptop, if needed: Acer 17.3" AS7750-6423 Laptop PC: Key Features and Benefits: Intel Core i5-2430M processor 2.40GHz, 3MB L3 Cache 4GB DDR3 SDRAM system memory
View 7 Replies View RelatedJust moved into apartment in Ann Arbor and am forced to use this ISP. They are not wireless friendly. Their manual sucks and will only provide tech support for $80/hour. I bought a Belkin router and got it working for my MacBook. BUT my roommate can't connect, even tho her MacBook sees the network. And I can't print to my wireless printer even tho it says everything is fine when I run the wireless diagnostics.The ISP has these rules:
- Only connect the router to the Internet or Wan port. Do not connect to the numbered ports (how do I know whether or not I've done that?)
- Do not use static IP addresses
- Do not run a DHCP server
Using my Acer Aspire 5750 at school my wireless connection speed will drop from around 4 Mbps to .30 Mbps. The speed will start out fine from startup and degrade over time. This happens only at school, and only on this laptop using this wireless card. My home network hold its 3Mbps down just fine. My campus has two wireless networks, one is WPA enterprise encrypted and one is open, both exhibit this behavior. Using my network credentials on another machine or using a different wireless card this machine works fine.I've updated to the latest driver and rolled back to previous ones.
This is happening on a fresh install of Windows and on Ubuntu live CD so it is not malware or something along those lines. Spoofing a different MAC address does not change this behavior. The devid is PCIVEN_14E4&DEV_4358&SUBSYS_E040105B&REV_00
It is a Broadcom Wireless N...
What could be causing this problem? Does the NIC not like the access points or vice verse? Are they any settings I should tweak? The drop in speed happens no more than 10 minutes after boot and occurs in both Windows and Ubuntu. I should add that other students don't have this issue so it is not a network wide thing. Other students get around 4mbps down continuously. Using somebody elses credentials on this machine doesn't work either.
I have been trying to make my laptop a hotspot but can't seem to get one to work. When I look for the sharing tab for the wifi adapter, there isn't one.
View 4 Replies View RelatedI'm trying to Bridge my wifi connection with a LAN to connect my XBOX 360 to Live. I have made the bridged connection with an LAN and my Wifi, and can connect to the bridge from my laptop, however from all of the guides I've tried following, they all say that I should find a Sharing tab under my wifi connection's properties, however I only have a Networking tab.
my specs are:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft� Windows Vista� Home Premium, Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, Intel64 Family 6 Model 23
[code].....
i recently enabled bridged mode on my first router/modem and now it seems that i cannot access the configuration with the normal 192.168.0.1 address. Is there anyway i can access the configuration excluding the hard reset?
View 1 Replies View RelatedI recently re-installed Windows 7.When I try to access the network set up between my PC and Laptop I get a box requesting my name and a password.
View 6 Replies View RelatedI am new to forum and stuck in connecting one computer to laptop. Here is the scenario: One computer running on windows 7 is connected to wireless router Netgear WGT624 v3 via Ethernet cable. The second is laptop running on Apple. The first one computer does not have any wireless dongle. The laptop is connected with Wifi Hotspot of mobile phone. Now I want to make network between computer and laptop via wireless router to share files and the Wifi Hotspot which is already used by laptop.
View 3 Replies View RelatedIs it possible to share files and folder over wifi internet just as with wired internet ? I have 2 Laptops with built in wifi adapter. Can i make them share files and folders through wifi. (No Router or other hardware)
View 3 Replies View RelatedI have a laptop (Win XP SP3) which connects to the Internet via wireless connection. Configuration is as follows:
Laptop connects to AP1 (wireless) AP1 connects to AP2 (ethernet cable) AP2 connects to AP3 (wireless)(AP3 is somewhere in the neighbourhood, i dont know where) Some of the APs or all of them may work as bridges, i dont know since i do not have access to their interfaces. I have a desktop, which is connected to my laptop with a crossover ethernet cable.
Wireless connection details:
IP: 192.168.1.72
Mask: 255.255.0.0
Gateway: 192.168.3.2
DNS: 192.168.3.2
LAN details:
Laptop's IP: 10.10.10.1
Desktop's IP: 10.10.10.2
Mask: 255.255.255.0
I want to share the Laptop's internet connection with my desktop. Tried ICS, bridging, etc. but nothing seems to be working.
we currently have one desktop PC, two laptops, two HDTVs, and three cell phones. All of them are Wi-Fi compatible. Currently, I have a NetGear WGR614 v8 router courtesy of Comcast.it is possible that I can have all devices sharing the same Wi-Fi network? The desktop PC is connected to the router with CAT-5. The TV in the living room can be connected to the router as well with CAT-5 as the router is less than a foot from the network jack on the back of the TV.The TV in the bedroom has a Wi-Fi ready via USB.My daughter who is off to college owns one of the cell phones a laptop and an XBOX360 which I am not concerned about connecting until she returns home around Christmas.
View 1 Replies View RelatedI am using BSNL Broadband with D-link for wifi network. My pc has windows XP and laptop has windows 7.
How can I share files between pc and laptop ?
I am attempting to replace my actiontec router with the Cisco 871 I have little expirience with CLI-IOS so I was trying to use sdm express that failed to load and when I finally got it to load it still didnt work and I ended up getting locked out of the router it was totally unresponsive. So I did a reset and now am attempting to use the Cisco Configuration Assistant to set up my wan connection but it have been loading security related data for 15 minutes and I have a feeling it's not doing anything at all. I don't understand what I'm doing wrong.... Any advice.... I just was trying to get a default set up that would give me internet access Im not trying to enable any of the security functionality at this point.
View 0 Replies View RelatedI know this is possible, but I haven't found the steps to accomplish this. I have a Win 7 x64 with an Alfa AWUS036H connected to the internet (strong signal). I have a Win 7 x64 notebook whose wifi adapter shows a very low signal strength. I know there is a way to use the Alfa AWUS036H both for the primary wifi/internet connection and for Virtual WiFi to the notebook.The Virtual WiFi is supposed to be part of Win7? But I can't find in the network control panel how to set it up
View 8 Replies View RelatedI had a custom device/computer on my network that was hacked from hong kong. It's one of those things where I seriously think the chinese have built a back door into it when they built it or something because everything was secured and monitored.The device runs it own OS or something like that I guess you could say. It can also run it in standalone mode broadcasting it's own signal. Once I figure this out I may not put it online anymore but thats besides the point right now. When it was hacked I'm pretty sure the port it uses to connect was changed from 80 to 591. When it runs in standalone mode I can connect to it but I am unable to actually access it's proprietary graphic network interface. It sends out UDP every few seconds or so and basically I was trying to search for some type of udp broadcast monitor and have tried using network tools such as netstat, port scanning, multicast, etc on all of the big three OS's because sometimes it seemed to finnicky what it wants to connect to. I've tried to let it connect back to my router again which it seems to do, but is then denied access and I think it may even have a trojan or somethng so I don't want it to that but if I have to to access it again I will.In standalone mode I've it usually trys to connect on 192...5 or 192...7 and I've tried to get through 591, 23, 80 etc. multiple times with no luck.
View 11 Replies View RelatedMy WRT54G Linksys router works with wifi and local connection but it wont let me configure to change it to PPpoe nor wont let me enable a wireless connection, so it's open to the public how do i get it to open it resetting it and holding the button on the router for 30 secs.
View 1 Replies View RelatedI have a computer through my old school and i still cant get into the main part of the computer to change my password etc; How do i unblock it?when i click it, it says; please contact system administration but i cant and they wont tell me.
View 1 Replies View RelatedI set my router to allow my xbox360's mac address, not knowing that it would kick out all of my other devices. So now I can't access my own router and I need to reset it. How do I do that?E1200 series linksys router. I'm looking for an ethernet cable and my installation disk right now to see if I can connect with the cable and maybe use something on the disk if I have to.
View 1 Replies View RelatedDuring installation of CM 5.1.4 on Windows 2003 Enterprise Server, I get popup windows "Stop All Programs". I checked Windows Service console but have been unable to determine which processes may be holding these files.
[code]....
I have one desktop system and one laptop.In desktop i have Internet Broadband. Now i have installed wifi PCi card into Desktop to share internet to my laptop.But there seems some problem i am not able to share internet.
View 9 Replies View RelatedI have a problem with my ADSL modem router WAG320N for internet sharing . I want to connect internet cable by RJ-45 port to my modem and receive internet on other WiFi enabled devices. It means I want to utilize my router modem as an access point. Is it possible to use this device as an access point ?
View 1 Replies View RelatedI've been using the trial version of a product called Folder Lock on another computer than the one I'm using right now to type this message. I got a little too enthusiastic about locking away folders into Folder Lock on that other computer, and I think I locked away Folder Lock itself.In the past (before this problem developed), when I clicked a Folder Lock icon, it used to prompt me for the Folder Lock password, which I would then input, and then Folder Lock would open, and I could lock and unlock folders. But the problem is that now I don't get prompted for the Folder Lock password. I get a message (from Folder Lock) that says, roughly, "you may not have permissions to carry out that action." So even though I have the Folder Lock password, I can't open Folder Lock, because it won't prompt me for the password, and just says I don't have permissions.I also locked into Folder Lock my downloads folder on that computer, and apparently folders or icons that used to allow me to access the internet on that computer. I can no longer access internet from that computer.I'm wondering how I can get Folder Lock to prompt me for the password, so I can open Folder Lock. I would like to unlock all the folders I locked -- including if I locked Folder Lock itself! I locked away a lot of my important stuff. I wonder if I should do a system restore to a date before I installed Folder Lock, but I wonder if the system restore might fail to delete Folder Lock, because Folder Lock might prevent its own deletion. I have Folder Lock 7. I have Windows 7.
View 3 Replies View RelatedMy wife and I Security Enabled our wireless network several months ago.We recently moved, and after transferring Internet service, we realized we'd lost our passkey.My wife's laptop has, after one failed attempt to connect to the network, refused to even show the network as an available connection.We currently have the router set to broadcast SSID.We have restored factory settings on the router and completely revamped the security setup.We've removed all other networks in the area as optional connections on her computer.We also replaced the ethernet cord to my desktop because the old one started erratically disconnecting.Nothing's worked.My wife's computer is a Dell laptop using Windows Vista.
View 6 Replies View RelatedNetwork adapter missing - Can't connect with Wi-Fi at home for sharing
View 1 Replies View RelatedI have installed a SumvisionSWV322P Wireless PCI Adapter in to my desktop and have configured it to run on my existing home network: I can connect no problem but after about 10 mins my whole desktop just locks up: The only way I can get out of this is by re-booting by turning the machine off completely by the on/off button. My OS is Windows XP Professional version 2002 SP3:
View 1 Replies View RelatedI have a Linksys wusb54gc, after downloading driver and install, system performance changed. Tried several fixes suggested at another site which failed Cannot delete (access denied) Trying to remove through control panel error "critical file missing" win xp os. Would like for this to work as it had on the computer it was originally purchased for. "gina.dll" interferes with the os.
View 2 Replies View RelatedI ran the firmware upgrade and hit the reset button for 30 seconds and everything went well until I went to restore my personal settings. When I went to the router page it asked for a user name and password but the old user name and password don't work so I am locked out and can't get to the restore page.
View 3 Replies View RelatedWe are using ASA5520 as our VPN concentrator and has configured IPSec authentication using digital certificates with Microsoft CA for the remote access VPN. The AAA server used for remote user authentication is Windows Active Directory. Screenshot of the AAA configuration is attached. The problem we face is that the "Login DN" account (marked in red box in the screenshot) is frequently getting locked out in the active directory. I have confirmed that the password is the same on both ends and the account is not used any where else.
The NTP server configured for the VPN concentrator is the Active Directory itself but no accounts are configured (not required) for updating the time service in the concentrator.
I have 3 computers, all Macs. Two are hooked into my WRT54GP2 via ethernet cables, and one is using WiFi (Airport Extreme). All get an IP number from the router via DCHP (no hard numbers). The router is also hooked up to a Motorola Surfboard cable modem.The two Macs using ethernet have no problems at all, and can access the internet and share files and printers. The WiFi Mac, however, can access the Internet fine, but cannot mount the other machines as file servers. It doesn't even ping them. What is going on in the setup of the router that is preventing the ethernet machines from being seen properly by the WiFi Mac?
View 6 Replies View RelatedSet up a Smart Wi-Fi yesterday. Linksys Smart Wi-Fi Router N600. Have 2 computers side by side. Connected my computer seamlessly. Works perfect. Went to set up my husbands computer (both computer are desk top HP Pavillion running windows 7) and the way I was doing it thru the network sharing center on his computer I was not able to get the computer to see the wi-fi. I tried both the router p/w and the p/w that was supplied by the smart wi-fi help center. So I wired it directly to the Linksys router with a new cat-5 ethernet cable. VOILA..internet connection! Question..is his computer secure even tho it doesn't have it's own p/w and is wired directly to the router? My thought is "yes" since the router is p/w protected.
View 8 Replies View Related