Cisco :: QoS / Bandwidth Allocation On A 2960?
Jun 19, 2012we want to dedicate 2mb to one of our fa ports on our 2960, is this easily done, or can be done on a 2960?
View 4 Replies
ADVERTISEMENT
Bandwidth Allocation By VLAN
Apr 19, 2012I am trying to find out wether it is possible to allocate bandwidth on a per-vlan basis.
We have multiple satellite connections coming into our infrastructure over a single gig ethernet cable from another service provider. The provider provides the connectivity on layer 2 and we are responsible for layer 3 connectivity for the clients on the other side of the satellite connections. The single gig ethernet cable is currently plugging into a Mikrotik 1100 router on our side, setup with VLAN ID and IP Addresses and everything works perfectly. The challenge now is that whilst we only have the one satellite client connecting, we can limit the bandwidth on the ethernet port to 512k for example which limits the client to only have 512k internet breakout. In the future, we need to be able to limit bandwidth as multiple VLAN IDs will be coming over that single ethernet cable and I'm not sure if one can do this at all.
Cisco :: Bandwidth Allocation - Connection Is Maxed Out?
Feb 5, 2013We have a DSL line at work which a few people share for Internet access.Sometimes if someone is doing a Windows Update or big download etc, the connection is maxed out and slow for everyone else.Is there a way to give everyone a set amount of bandwidth via a Cisco router (2811) or will I need to use something like a packeteer?
View 4 Replies View RelatedCisco Firewall :: Bandwidth Allocation On ASA 5510
Nov 8, 2012I have a cisco ASA firewall 5510.Just i have configurd for 1st port as nameif ouside witch public ip, 2nd port as a nameif inside with local ip, and done the nating, dhcp and dns. now i am able to get internet from inside port, which is getting dhcp.up to that it is ok.
And I want to restrict bandwidh 1Mbps for local port (2nd port) how to config 1Mbps banwidth allocation for port no 2, I mean nameif inside should have 1Mbps limet.
Cisco WAN :: 2851 IP Based Bandwidth Allocation
May 16, 2011I have Cisco 2851 router & need to allocate bandwith based on IP's. eg. 192.168.1.1 should use 7 Mbps & 192.168.1.2 should use 2 Mbps & 192.168.1.3 should use 1 Mbps. Let me know the configuration on how to execute it on a router.
View 4 Replies View RelatedBandwidth Allocation To Vpn Interface Under Physical Eth0?
Feb 15, 2012I have my wan connection on the eth0. The bandwidth is 2mbps. I am running qos on that interface saying 192.168.200.0/24 can use 80% of the bandwidth and 192.168.201.0/24 can use 20% of the bandwidth. I Also have vtun VPN inteface to our branch office. I also wan to run some qos on that interface. How do i go about allocating the bandwidth on this interface? it is actually going via the eth0 interface, but the system actually see's it a an independent interface on its own right, so it requires it's own qos policy.
View 3 Replies View RelatedManage Bandwidth Allocation From Wifi Network?
Jul 29, 2011I have an internet connection (landline and wifi modem) at my parent's summerhouse as I need it for work. Nobody else does around here so I get constant nagging from neighbours to give them the password. I can't say no however I'm afraid they may use up too much of my bandwith connection which could lead to alot of money being lost from my part. Constant and stable internet is a must for my work. how can I limit the bandwith I give to them? Can I create a second public network with limited bandwith or something like that?
View 5 Replies View RelatedProtocols / Routing :: Linksys WRT54G - Allocation Of Bandwidth?
Mar 3, 2012I am using Linksys WRT54G router on my broadband internet connection. I want to know, is there any way to allocate more or less bandwidth to any PC connected to my network?
View 2 Replies View RelatedCisco ValetPlus M20 Router / Bandwidth Allocation For Wireless Devices?
Jan 13, 2013limit the bandwidth used by certain wireless devices on my network. The problem I'm having is of priority. For some reason when someone is watching Netflix on my laptop (wireless) no other device has any bandwith available to it, so while someone is watching Netflix my hard wired desktop can barely load Google.com much less do anything useful.I'm using a Cisco ValetPlus M20 wireless N router.allocating at least a minimum amount of bandwidth to wired devices?
View 1 Replies View RelatedCisco Switching/Routing :: 2960 - DHCP Server Port-Based Address Allocation
Nov 15, 2012Does the 2960 switches with LAN-Lite support DHCP Server Port-Based Address Allocation?
View 1 Replies View RelatedCisco :: Bandwidth Monitoring On A Catalyst 2960
Oct 23, 2007I'm working with two Catalyst 2960 switches and I would like to know if there is a way to monitor bandwidth on individual ports. Ideally I would like to have one graph showing a bandwidth usage reading on each port. I tried using the Network Assistant to accomplish this, but I was only able to view one port at a time. I also tried using a traffic graphing program from Paessler, but a MIB file is needed to allow the program to connect to the switch. When I ran a search on the network management page the 2960 was not on the list for MIB supported products. Is this type of graph possible to do?
View 2 Replies View RelatedCisco Switching/Routing :: To Limit Bandwidth Using The MAC On 2960
Jun 11, 2013Any example to limit the bandwidth using the MAC address on 2960 ? I want to limit the bandwidth (IN / OUT) of a server only for Internet flows.
View 2 Replies View RelatedCisco :: 2960 Bandwidth Management For Wireless Clients
Dec 20, 2011We are looking at putting in a solution at a hotel for Free Guest WiFI.The solution would cover 4 floors and about 120 rooms and some open areas .In short the hardware would look as follows
-2500 controller
-1142LAP
-2960 PoE switch
-878 Adsl router for internet connectivity (20Mbps/1Mbps internet ADSL feed)
One of the concerns raised by the client is that they would like to make sure that no single user could eat up too much bandwidth creating problems for the rest of the users . Can the above KIT or something similar achieve this objective? As far as I can think of we would require a Proxy server .
Cisco Switching/Routing :: Bandwidth Limit On Catalyst 2960?
Feb 9, 2012I have ciscl catlyst 2960 8port switch, (flash:c2960-lanbasek9-mz.122-50.SE4/c2960-lanbasek9-mz.122-50.SE4.bin).
and in need to configure bandwidth limit for one of the port as a 1Mbps.
Cisco WAN :: Split Local And International Bandwidth On 3825 With 2960 Switch?
Jul 7, 2011On my country, international bandwidth still expensive. I want to split local and international bandwidth and limit inbound and outbound bandwidth for each ip like this:
IP 10.100.10.11 can use 100Mbps local bandwidth, 1Mbps international bandwidth
IP 10.100.10.12 can use 100Mbps local bandwidth, 2Mbps international bandwidth
I want to use
Router 3825Switch 2960
NB: I have online one internet line.
Was the above equipment can perform functions that I want or need any additional equipment? And Should i use 2 line to achieve my goal?
Cisco Switching/Routing :: Catalyst 2960 Switch Port Bandwidth Limit?
Sep 18, 2012I want to configure switch port bandwidth limit for my Catalyst 2960-48, is there any hardware / ios limitation? can I configure it at all 48 switch ports?
View 1 Replies View RelatedCisco Switching/Routing :: Limit Bandwidth On A Gig Port Of 2960 Or 4506e Switch?
Apr 4, 2012how can i limit bandwidth on a gig port of 2960 or 4506e switch?
View 9 Replies View RelatedCisco WAN :: Does Cisco Catalyst 2960-8TC Support Bandwidth Limit Control
Aug 22, 2011We are about to share a 10 MBit ISP connection with 2 others companies, and they are going to split the bill up into 3,3 and 4 Mbit, so we where thinking that we could setup a switch before their and ours router and provide them with a static IP from our ISP. But is it possible to set a bandwidth limit on the ports of a Cisco Catalyst 2960-8TC, so that we can set a limit of 3,3 and 4 on 3 ports.
View 1 Replies View RelatedCisco Wireless :: WLC 5500 / Ip Pool Allocation
Nov 19, 2012We have a WLC 5500 connected to a 2960 acting as core switch. there is a server attached to the switch , bearing all dhcp pools for lan and wireless users. Can the wlc or the switch be configured in such a way that the wireless users associating to the wlc get their ip addresses from the dhcp pool configured on the server. Can the configuration can be shared for such a setup.
View 5 Replies View RelatedAAA/Identity/Nac :: 5585X ASA Anyconnect VPN IP Allocation
Sep 1, 2011Starting a project where they customer has ASA 5585X with SSP40 with 10K SSL Premium Lic and ACS5.1.The cust wants IPSec, and Anyconnect Client terminations. The number of users will be close to 6000 and will scale.Due to the huge scale of users, i am not able to finalize a design. Have the following doubts.
1. Will ACS have any issues in supporting a database this huge. OR is it better to go with the AD/LDAP integration.
2. What is the best way to allocation IP address. Does ACS 5.1 support dynamic allocation form an IP pool.
I have been browsing through the forum, couldnt find anything concrete.
Cisco VPN :: ASA 5520 - Error / Memory Allocation Failed
Apr 2, 2012I am running IOS version 8.0(5) in cisco ASA 5520. This issue i am facing is that when the memory utilzation reaches 49 percent, the web-vpn users are not able to login as they are getting a blank page. The only error which is getting in the output " sh mem webvpn allobjects" is ERROR: Memory allocation failed?
View 2 Replies View RelatedCisco Firewall :: Pix 515E Memory Allocation Failure
Mar 17, 2011I am using a Pix515E with 8.0(3) and 128MB RAM. It ran OK for months but has recently had several episodes during which it produced streams of memory allocation failures (syslog 211001). When in this condition I could not log into the VPN. It was still operating but some users were having problems and I eventually had to restart it.
The traffic load is typically 10Mbps, and the max number of connections is around 10,000 but typically 5,000. The CPU usage is 10%-20%. There is 1 VPN with normally 1 client. The memory usage is always high, between 115MB and 120MB but during these problems it creeps higher.
Why might the memory usage be so high when my network load is quite light for the 515E? What circumstances cause the memory usage to increase during operation? Is there anything I can do to prevent the memory usage increasing to the point where the PIX crashes?
I have a second 515E with 8.0(4)32 and 64MB RAM, loaded with the same config. I have not had this one in service, but off-line it is using 53MB of memory. If the spare pix needs 53MB to load the firmware and my config, why does the other one use 115MB?
Cisco AAA/Identity/Nac :: ACS 4.2 - IP Pool Allocation Based On NAS Port IP Address
Jul 7, 2010using ACS 4.2 and I can't find a way to bind an incoming NAS port to a specifc IP Pool:
When a user connects the request to auth comes from 2 possible NAS ports randomly (this cannot change). Depending on which NAS makes the requests determines the IP range required, so I need 2 IP Pools. There is no way to say 'if request comes from NAS1 give IP from Pool1 and if request comes from NAS2 give IP from Pool2'
I have gone around and around with NAFs and NARs, but cannot do this.I can create 2 ACS groups with the specific NAS and specific IP pool within, but then I cannot have a single username bound to both groups.
I moved the auth to an AD group in the hope that I could bind that single AD group to the 2 ACS groups; and so have a single username, but no joy.
Cisco Infrastructure :: 3550 - Limiting Power Allocation To 15.4 W On Pre-POE Switch?
Jan 2, 2013I'm using a Catlyst 3550 to supply power to a IP network surveliance camera. By default, the predecesor to POE, Cisco Inline Power allocates 15.4 W of power to a port ... What is the process for reducing this power output?
"For an IEEE device, the switch always allocates 15.4 W to the port. The switch does not display the IEEE class type in the show power inline privileged EXEC command output. Instead, it displays n/a."
Cisco Switching/Routing :: Port Allocation In Nexus 7000
Mar 4, 2013I have one cisco Nexus 7000 with version 6.1(2).I created 3 VDC
ADMINCOREsecurity
I have configured 1 - 45 ports for Core and 46 - 48 ports for Security.Now I am not using the VDC Security and I tried to move the assigned ports 46 - 48 from Security to ADMIN.Switch accepted the command .But the ports are not visible on ADMIN VDC.Now it is not showing on Security VDC also. I need this ports in ADMIN VDC
Cisco WAN :: 881 / Memory Allocation Of 65536 Bytes Failed From 0x81F083F4 / Alignment 16
Oct 31, 2011We have a Cisco 881 router, which is crashing. We have seen that the ARP cache fills up so much it causes things to crash, our phones go down.. We dont know why this however IP CEF seems to be doing it, when we disable it goes away however disabling IP CEF causes our L2TP tunnel to become inoperable also. So why does IP CEF cause thousands of AR entries and how can we limit that!? Below is the error, sample of the ARP cache and our config. You will notice we also have a /31 given to us on WAN interface, this was given to us by our service provider. This is really strange I cant find other examples on internet.
The error:
Nov 1 04:21:57.474: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x81F083F4, alignment 16
Pool: Processor Free: 55176 Cause: Not enough free memory
Alternate Pool: I/O Free: 2352 Cause: Not enough free memory
[code]....
Cisco Wireless :: WLC 4404 HREAP Local Switching And VLAN Allocation
Nov 23, 2009I have a tale of woe for you who may be considering Hybrid REAP with local switching.
My client has a varied configuration, but the requirements basically screamed HREAP with local switching. They have 15 sites, had already purchased a single WLC 4404 and they needed between 4 and 24 APs at each of the sites. Each of these locations are connected by a WAN link of good quality, but only a single link so there is no assurance of availability; the client has local resources so it would be useful if wireless stayed working during an outage.
So I setup the WLC for HREAP local switching. I setup AP Groups VLANs, but I noticed it had no effect on the VLAN allocation for HREAP. This was unfortunate, because not every site has the same VLAN configuration - some sites had a L3 switch and others only a L2 switch. But I suffered through this and configured each AP manually with the appropriate VLAN mappings.
The infuriating thing, is now that they have bought a second WLC 4404 (they expect to increase the number of APs beyond 100) all these VLAN mappings are messed up when APs connect to the second WLC. I've been going through them one by one again - it is really unfortunate that the AP Groups VLAN mappings don't apply to HREAP local switching.
I'm going to get back to the next 80 APs - but if some of you have a system for handling the VLAN mappings of a large number of APs.
Cisco Switching/Routing :: C2960S How To Calculate Buffer Allocation Needed
Jan 2, 2011I need to configure these qos settings in a C2960S. [code]How I calculate the buffer allocation needed? [code]
View 4 Replies View RelatedCisco Switching/Routing :: Catalyst 2960S Port-Based Address Allocation?
Sep 27, 2012I just bought a Catalyst 2960S to test out the feature "Port-Based Address Allocation" which is required for our factory. I followed the instruction from Cisco IOS and did all the steps but I could not get it to work, my network client did not received the expected IP address that I configured.
View 8 Replies View RelatedBandwidth Test For 1 Mbps Bandwidth Line?
Sep 9, 2011We have 1 mpbs bandwidth line, but most of the time we are getting only 300-500 kpbs download speed, i want to send statistics report to our ISP, what will be best procedure to test the bandwidth report, i have checked in some websites like bandwidthplace and speedtest but these sites are not accurate, how to check the actual bandwidth we getting from ISP against 1 Mbps. We have solarwinds monitoring tool in this i have configured the WAN interface for 1 mbps
View 5 Replies View RelatedCisco Switching/Routing :: Add 2960 To Stack Of 4 X 2960 Switches
Feb 7, 2012I have an existing stack of 4 x 2960-S switches connected by stack cables.I would like to add another 2960-S switch to the stack but am unable to as the 2960-S will only allow 4 x 2960-S switches per stack.how I would add the 5th 2960-S switch to the existing stack of 4 x 2960-S switches.
View 12 Replies View RelatedCisco Switching/Routing :: 2960-S To 2960-LST Configuration Over Fiber?
Feb 11, 2013I have a 24 port 2960-S that is not communicating with a 2960-LST that it is directly connected to over fiber. The link is up on the LST but will not come up on the -S. What command should I use to bring up this link? I have tried no shut from the (Config-if)# prompt.
View 3 Replies View RelatedCisco :: Monitor PAT Bandwidth With SNMP?
Apr 4, 2012Is is possible to monitor bandwidth utilization of a PAT on an ASA? We're running version 8.2.
View 1 Replies View Related