Cisco Routers :: 4400N - Gather DHCP Client Stats?
Oct 2, 2012
I've got a WRVS4400N wireless router running DHCP for a couple dozen wireless clients in a public library. We need to gather statistics on the wireless clients on a daily basis: average number of clients, max number of clients, average time used per client etc.
The router only gives a list of clients currently allocated an IP address, but there doesn't seem to be a way to gather statistics over time. Is there a program that will interface with the router to gather more detailed statistics?
View 1 Replies
ADVERTISEMENT
Oct 19, 2011
Can add feature "release" and "renew" to wan dhcp client? Is it WOL not possible in RV220w? i tried forward broadcast magic packet from wan side, change broadcast IP and through VPN tunnel (PPTP & IPSEC)...got failed i change from draytek 2130n to rv220w, 2130n much better. except SSL VPN.
View 2 Replies
View Related
Feb 23, 2013
I have a Wireless N router model F5D8236-4 v2 (01) with firmware 2.00.04 (Nov 12 2008 10:51:08) and it's not showing all issued wireless or Wired IP addresses in DHCP Client List.
They all have IP addresses and connect to the internet through the router, but in the router administration page, they're not listing. The Windows devices all show but most of the Mac devices are not, nor is my XBox 360.
My reason for investigating this is because the router seems to keep losing the Mac devices and a router reboot fixes it, but it shouldn't have this problem because all the Windows devices just seem to work.
According to the support page I have the latest available (dated November 12, 2008 which really seems kinda old to me for a Wireless N router). Are there any plans for a new firmware offering for this modem or have you already deprecated it as "legacy equipment"?
View 1 Replies
View Related
Apr 21, 2013
Do the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.
View 4 Replies
View Related
Apr 24, 2012
We're running NCS 1.1.0.58. Since updating to this release from the 1.0 release, the 'Autonomous AP Client Status' and 'Lightweight Client Status' background tasks have been failing with message 'java.lang.NullPointerException'. I believe as a result of this that the 'Current Clients' tab on an AP monitoring screen just reports 'No data available'.
View 2 Replies
View Related
Feb 14, 2011
I'm trying to gather netflow data over an IPSEC VPN and through my research I've learned that I need to configure Flexible Netflow. However, I have a Cisco 2801 router with the latest ROMMON and IOS and the Flexible Netflow options aren't available.
For instance:
flow exporter dwtmonitor
destination 10.0.16.172
source Loopback0
transport udp 2055
output-features
When I type "flow exporter <name>" it only allows me to enter "flow <name>" and there's no "destination" options or anything else.
ROMMON: 12.4(13r)TIOS: 12.4(25d)
View 2 Replies
View Related
Nov 18, 2012
I need an Wireless Access Point.Two SSID simultaneously in different IP Rangeit is with a simple browser GUI to manage? (not console and controller)a distance of about 50 (we can place multiple APs)N speedDual BandWhich series meets the above requirements?It can also Wireless-N Gigabit Router as 4400N, but it does not support Dual Band.
View 1 Replies
View Related
Jan 6, 2010
I just bought this router (4400N) at a retail store for $239.00 with a ship date of 12/2009 and the QuickVpn client will NOT work with Windows 7. Furthermore, I do not see any
signs of Cisco fixing this.I would be happy if I could use the pptp and the MS Clients. There is no pptp option in the 4400N. All I can do is port forward to my MS server. This does work, but then I cant vpn out....Unfortunately, I will have to return this router for a "STORE CREDIT" . This product should be removed from the shelves and recalled until the client works with Vista and Windows 7 in any way or fashion.Yes, I did install the 1.3 version and I even tried it in compatibility mode for XP?
View 14 Replies
View Related
Jul 13, 2012
I have been having a problem with my 4400n dropping connection when streaming video / audio.It is connected half duplex to a cat2950 and the media server is mediatomb on a linux box the client is a ps3 presently.
View 3 Replies
View Related
Jan 23, 2012
I have a fresh install of LMS 4.0 on Windows Server 2008 Standart SP2. I have one NIC with static IP configuration. I also disabled DHCP client.The problem is follows: when I go to Inventory - Device Administration - Add/Import/Manage Devices, I always get this error:Error in communicating with DCR Server. DCR Server may be down. Please start the DCR Server and then refresh the page.Reload server/ Daemon Manager dont solve this.I try to beat this problem 2 days already. Second uninstall also doesnt solve the problem..
About a week ago I tried to clear log files which was 270gb (syslog.log) and after that restarted the server. And all inventory devices suddenly disappear! I could find it from search menu but cant access - cisco works said that there is no such a device in Device Repository or I havent enough right to view it (but i logged as admin). And after this i failed to add any device in Inventory. So I reinstall Cisco Works and get that DCR error..
View 1 Replies
View Related
Apr 25, 2013
I have a Cisco ASA 5505 I've configured as a DHCP server. I'm getting DHCP on workstations attached to the appliance, but I'm getting the following message when the appliance loads:DHCP Client: can't enable DHCP Client when DHCP Server/Relay is running on the interface DHCP: Interface 'inside' is currently configured as SERVER and cannot be changed to a CLIENT by a CLIENT featureI'm not trying to configure this thing as a client, so I'm not sure why the system is producing this message.
View 2 Replies
View Related
Oct 19, 2012
Can I have two asa firewall between dhcp client and dhcp server. if yes what solution i have to have to get dhcp leases. should i have to configure dhcp relay on both the asa.
View 5 Replies
View Related
Feb 4, 2013
I have a WLC5508 , we are using external DHCP for WLANs
one WLAN is able to get IP from DHCP server but another WLAN not , the DHCP server is same , only 2 different scopes.
This is debug
*DHCP Socket Task: Feb 05 21:26:43.106: e8:06:88:9b:a8:04 DHCP received op BOOTREQUEST (1) (len 308,vlan 1, port 1, encap 0xec03)
*DHCP Socket Task: Feb 05 21:26:43.106: e8:06:88:9b:a8:04 DHCP processing DHCP
[Code].....
View 2 Replies
View Related
May 13, 2012
We recently upgraded our 5505s to 8.2(5) 26 and noticed that each will crash after a cerntain amount of time. Some crash every 30 minutes other will crash every 4 to 8 hrs. The only difference would be the user's home ISP and/or home router, if they have one. They are configured with a dynamic dhcp IP address for the outside interface and the crash files starts with the following:When we downgrade back to 8.2(5) 13 the problem goes away. Any known bugs for this version? I haven't been able to find anything yet. We do have one 5505 that does not have this issues. The only thing that may be different is that it was never at 8.2(5) 13. We had downgrade it from a 8.3 version.
View 2 Replies
View Related
Jun 21, 2011
how I can get to the DHCP client table on a Cisco 891 Router ? We just upgraded our router from a WRVS4400N to the Cisco 891. THe WRVS4400N has the feature DHCP client table that I can see the Client host Name and IP address,Mac Address I have CCP and CCP express installed on my system?
View 1 Replies
View Related
Apr 25, 2012
I have intergrated wlc module in 2800 series cisco router, switch, cisco 1130 lightweight access point, i configured dhcp on router for wireless client, deal is that AP taking ip address from router its ok, but client cannot take dhcp, what im doing wrong? here is configuration of wlc router and switch
wlc configs/
config interface address management 172.16.1.10 255.255.255.0 172.16.1.250
config interface address ap-manager 172.16.1.11 255.255.255.0 172.16.1.250
[Code].....
View 1 Replies
View Related
Jul 1, 2012
I'd like to know when the DHCP client will send DHCPInform (8)? And how can I force the client to send this type of message?
View 1 Replies
View Related
Aug 23, 2011
A Windows Server 2008 r2 with 2 internet ports. One (IP: 10.0.96.132) connected to company intranet and one (192.168.10.1) as DHCP server connect to several PCs (192.168.10.**) through a switch.The problem is the PCs (192.168.10.**) can ping the DHCP server (192.168.10.1) , while DHCP server (192.168.10.1) can not ping (192.168.10.**).How to configure the server so that all these PCs can access the intranet?
View 4 Replies
View Related
Feb 26, 2011
I recently upgraded from a WRT54G and am having issues with a Win7 PC with wireless-N. Initially I had it configured static at 192.168.100.100 and everything worked, but the speeds were miserable (I followed all the forum posts and recommended settings). I noticed in the Status section of the router pages that the system showed up with the correct MAC address, but the IP showed as 192.168.100.10, which is the same as the router. Assuming this might be causing issues, I set a reservation for the system at .100 and set the client to use DHCP. However, now it won't pull an IP address at all. The status pages show the client with the correct MAC address, but an IP of 0.0.0.0. I've verified the MAC address a dozen times and rebooted the router and the client dozens of times with no change. Even when I removed the reservation, the system won't pick up an IP. I have a wireless-G client that's pulling an IP fine, so I know it's sort of working. The wired LAN is working fine, too. There are no IP conflicts, either. I changed DHCP to 'Always Broadcast (compatibility for some DHCP clients), but no change there, either. The client sees the network and still has a good signal, but just won't grab an IP.
I'm running Hardware Version: B1 / Firmware Version: 2.01NA
View 2 Replies
View Related
May 30, 2012
My AP get IP from 6509, but client cannot get dhcp from my dhcp pool for client, what is the reason?i have 3750g switch with integrated WLC, i connect it to 6509 I did all configs yesterday here is outputs
WLC
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
-------------------------------- ---- -------- --------------- ------- ------ -----
ap-manager LAG 10 172.16.10.100 Static Yes No
globus LAG 20 172.16.20.254 Dynamic No No
management LAG 10 172.16.10.99 Static No No
service-port N/A N/A 0.0.0.0 Static No No
[code].....
View 8 Replies
View Related
Oct 31, 2012
Currently we're providing DHCP to wireless clients from a dhcp pool on a cisco 6500. Due to new requirements we need to move to windows 2008 dhcp and when I test this on an unused WLC (7.0.235.0) the client doesn't get an address.
When I do a packet capture on the client I see it requesting dhcp but not getting any response from the server. When I do a dhcp debug on the client I see the same (see attached file).
This seems to me to be a server issue but the same server is supplying addresses to wired clients.
View 3 Replies
View Related
Dec 16, 2010
I am using a 1811W and CCP for configuration. I am trying to assign client names to devices on the LAN so that when a network scanner is used, the client name is displayed. I have attached part of the running config after a binding has been done. My assumption is that the scanner should now show 192.168.1.109 as name <Supermicro>, but the name is blank. Is this configured correctly for what I am trying to acheive?
View 3 Replies
View Related
Sep 11, 2011
WAP4410N / configure dhcp OR dhcp CLIENT?
View 3 Replies
View Related
Jun 5, 2011
I've got as Cisco AS5400 Ver 12.3(22) with the E1 controllers acting as ISUP TG (pri-groups). Since we have no streaming for call records to RADIUS serving etc. is there a way to setup a log or history buffer for alerts for traffic congestion? With high call rates the "normal" realtime methods of using >sh call active voice breif | i No Circuit Avail wouldn't be pratical since memory/processor usage could be an issue. The >debug isdn q931 interf dch 1/0 would of worked but again so much traffic is coming I don't want to increase the size of the logg buff >300K.I guess I was expecting an easy way out being an old TDM salt used to the 5E/Telica Plexview/DMS having CDR and Traffic Stat info readily available. I know the AS5400 is a powerful device, maybe I just haven't got the right command down or totally overlooked the obvious.Oh, and this is connected to the Cisco PGW/SGC 2200 Version:"9.3(2) and I haven't found anything in it's logs. [code]
View 1 Replies
View Related
Feb 9, 2011
I just started having this problem yesterday. I was experiencing weird downloading/internet browsing issues and couldn't figure out what the problem was. I started looking around my router settings and noticed that in my DHCP Client list, my computer isn't in it. The router is hooked up to the computer, so it's not wireless. My phone and my girlfriend's laptop are listed, but the main computer isn't. It's especially causing problems with port forwarding. Downloads will stop because the port isn't showing as open. I'm running 64 bit Windows 7 and a Belkin N+ Wireless Router, model F5D8235-4.Firmware is up to date.
View 6 Replies
View Related
Jul 9, 2011
I was just wondering on the stats page of my DIR-615 the WAN Stats is in packets. How do I convert that into megabytes and gigabytes so I can track my usage?
Since AT&T put in caps and do not provide a usage meter. I would like to keep track of my usage.
View 3 Replies
View Related
Aug 8, 2012
I have a Cisco 876 router running 12.4.(15)T5, configured as DHCP client. This works nicely.
A Cisco 886 router, running 15.1 software also works with the DHCP client. This also works but has the following strange beheaviour: In the running-config an ip route 0.0.0.0 0.0.0.0 <dhcp assigned address> appears. Also - some other static routes that are in the config using the dhcp keyword are duplicated with the dhcp-assigned address
Now - when a write mem is done, these dhcp-generated route entry's are stored in the startup-config...
This beheaviour is completely different and VERY unwanted. After a change from DHCP server the config will simply stop working, when a write mem was done at the first DHCP situation.
Should we stop using write mem commands when a DHCP client is active in IOS? Is it a bug? Is it a feature?
View 1 Replies
View Related
May 23, 2013
I need to configure public and private wireless access using an ASA 5505 and an Aironet AIR-AP1041N-A-K9. I need to be able to do this via ASDM and http if at all possible. I simply do not have the time to learn hundreds of lines of arcane CLI code. The Aironet connects to the ASA successfully, and receives an IP. I can then connect to the AP wirelessly, but do not receive an IP. I have setup a second SSIDVLAN on the AP, and can't connect to it at all.
View 4 Replies
View Related
Aug 21, 2012
The wireless client can't get the DHCP address when I enable the On-MAC-Filter-failure, MAC Filtering and Web Auth. Client can get the DHCP address when I only enable the Web Auth in the same WLAN SSID. The WiSM verion is v7.0.235.0. [code]
View 1 Replies
View Related
May 17, 2012
I can ping [URL], from the router but not from a client attached to the router dhcp interface(10.1.3.1). When I turn on ip routing I cannot ping at all. Here is the config I have now that can ping the internet from the router.
sh runBuilding configuration... Current configuration : 1191 bytes!! No configuration change since last restart!version 12.3no service timestamps debug uptimeservice timestamps log datetime msecno service password-encryption!hostname
[code]....
View 7 Replies
View Related
Dec 15, 2010
I have a Cisco 2621XM router with two ethernet interfaces that sits before a vendor supplied VPN router. I need to see the IP traffic incoming to my router from the WAN side (fasteth0/1 below). I setup ip cef, and ip flow ingress on the interface. However -- it seems that what I see when I use "ip cache flow" command doesn't have a very long history or life. What commands am I missing so that I can see a summary of the stats over say the last 5, 10 or 15 minutes? Is this the best config that can be used for this, or can I create a more summarized report just using the router HW and IOS? Basic current configuration:version 12.3service timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname Littleboy!ip subnet-zeroip cef table event-log size 1024ip cefip cef accounting per-prefix non-recursive prefix-lengthip cef traffic-statistics load-interval 180!ip flow-cache entries 2048ip flow-cache timeout inactive 60!interface FastEthernet0/1 description Littleboy to vpn-wan ip address 10.1.0.1 255.255.255.252 ip flow ingress?
View 5 Replies
View Related
Aug 9, 2010
Is there a good reference in how to interpret the "show AP stats" command?
I have a new (online for 15 days) 1142 listed below. It is the first 802.11n AP I've deployed. The stat counters look bad [code] But I don't know how to put it all together to say "here are the stats, this is the problem". I see TxFrameCount, but no corresponding RxFrameCount, so it is hard to calibrate some of the errors. [code]
View 4 Replies
View Related
Mar 17, 2011
I have DHCP server running in windows 2003. Presently its unable to provide Ip address for VPN clients who connect remotely. What I should do / reconfigure in DHCP, so that the DHCP server provides address for VPN clients.
View 4 Replies
View Related
