Cisco Routers :: Can ISA550 Route VLAN Traffic

Mar 24, 2013

Just picked up a ISA550 and have been playing around with it a bit but seem to be having some trouble.  I have two LAN subnets in my small business with approx 10 hosts per subnet.  I'd like to use the ISA550 to route between them (and to the internet) but can't seem to figure out how.  Is it just as simple as creating two VLANS?  Can the ISA550 route VLAN traffic?With my old RV042G, I had the option to setup multiple subnets inside the setup menu but I don't see any such area with the 550. 

View 2 Replies


ADVERTISEMENT

Routers / Switches :: Netgear GSM7248R - How To Route From Vlan To Management Vlan

Jan 20, 2011

I have a Netgear GSM7248R switch with 5 different Vlans including th management Vlan. Each of the vlans are connected to my layer 3 switch for routing. I want to access the management vlan form any of my Vlans so my layer two switch can be detected by my snmp manager.

View 3 Replies View Related

Cisco WAN :: VLAN 310 - Apply Route-map / Send Traffic Back Down To Switch?

Sep 26, 2011

I have some specific traffic that I am attempting to pull off of VLAN 310 at the router, apply a route-map that sends this specific traffic  back down to the switch on VLAN 55 (and the private address) and once it hits the switch apply a route-map on that VLAN 55 interface directing the same traffic over to the 72.x.x.9 address which goes through a FAP box back up to the router on another interface.

I have attached the config information, I know this isnt the best practice way to do this however right now this is how I have to do this.When runing a trace from the net traffic stops at .2 and when running a trace from my test /30 it stops at .2 as well. I am not sure what to do at this point

[code]...

View 6 Replies View Related

Cisco Routers :: Installing Intermediate SSL Certificates On ISA550?

Mar 30, 2013

One is the FQDN.crt for my domain and the other is the intermediate certificate that is responsible for completing the chain of trust.  However, I haven't been successful with installing the intermediate .crt onto my ISA550. I was able to install the FQDN.crt using the guide here: url... but that doesn't talk about installing chained certificates at all.
 
I have seen some guides talking about how to do this with ASA devices but it seems those don't apply to the ISA.  This is mostly because there is no CLI with the ISA (as there is with the ASA) and also I don't see way to import/export private SSL keys from/to the ISA.

View 1 Replies View Related

Cisco Routers :: ISA550 Restore Backups From Other Devices?

Jun 7, 2013

Although I have no problem with backup/restore in ISA550 when I do it in the same device, I do have problems when restoring in one unit the backup of  another unit, i.e. when cloning devices in order to avoid having to configure every device from scratch. Lets call A the master device and B and C the devices I try to clone (to save most of the configuration) to modify them later.  I get two different situations here, but none of them works:
 
Situation 1.B reads without complaining the backup from A and gets the same configurations settings than A, but once modified appropriately to stablish a VPN Site-to-Site tunnel with A, ther is no way to make it work. Furthermore, this unit cannot be configured to VPN with A, even using the Site-to-Site wizzard (which resets all VPN settings).
 
Situation 2.C complaints when reading the backup from A and does not read it. However, this unit can be configured by hand using the wizzard and the VPN works fine.
 
So, I suspect that something in the backup identifies the unit in such way that VPN gets in troubles. What it does work is doing a FULL RESET of the unit B and then configure it manually.
 
I have reported the issue but the Cisco agent closed it simply saying that this cannot be done. I have serious dificulties believing that in you have N devices you have to do N configurations from scratch. I am aware that perhaps some codes must be removed before doing a backup, or that should be something like an "anonymous backup" for such objective, but I cannot accept that it is impossible to do.

View 1 Replies View Related

Cisco Routers :: WRVS4400N Can Work Route All Traffic Through

Oct 5, 2011

i want to set WRVS4400N Route all traffic through, it function as same as sonicwall Route All.

View 1 Replies View Related

Cisco Routers :: Configure SR520 To Route Internet VLAN To Firewall

Jan 20, 2012

My operations manager says "Could you go on-site and configure a new clients new internet connection?" I make the arrangements and go on-site. As I'm working with the providers tech he says "Do you have a sub-interface confgured for a dot1q VLAN id of 1057?", I say "What?". Anyway my firewall is not capable of dot1q VLAN, so he says "Do you have a Cisco router that can provide the trunking?", I say "Yes, I tink so but not with me". The question is can I use an SR520 between my firewall and the provider demarc to route the VLAN he is talking about? My initial discovery says yes but I am not quite sure of the details on how to achieve this on the SR520.

View 2 Replies View Related

Cisco Routers :: 527W Unable To Route Traffic Via APN Backup Without Disabling VPN Tunnel

Oct 9, 2012

I have a Cisco 527w which we are wanting to deploy to our remote sites however i've found a bug. We use ADSL with an IPsec tunnel as primary and 3G APN for failover . When the ADSL goes down the route via the IPSec tunnel remains and i am unable to route the traffic via the APN backup without disabling the VPN tunnel .

View 0 Replies View Related

Cisco Routers :: RV220W - How To Force All Traffic From VLAN To Go Through VPN

Nov 21, 2012

Just setup two RV220Ws with a IPsec VPN connection.  All working well.  However, I have a question regarding how to force ALL traffic from a VLAN to go thru the VPN.IPsec from site A (EU) to site B (USA) working good.  On Site A I have a dedicated VLAN that needs to have ALL traffic (internet included) be sent thru the VPN tunnel.  The main purpose of this is to have internet presence as if in the USA.  This is necessary to access some sites available only in USA specially for the kids -their web sites will not display content because they're not in the USA at the moment.  How do I accomplish this?   I tried to setup a Static Route for the VLAN but you cannot setup a 0.0.0.0 destination route.

View 2 Replies View Related

Cisco Routers :: RV220W - How To Restrict Inter VLAN Or DMZ Traffic

May 9, 2011

I just received my rv220w and perhaps I haven't got enough experience with cisco routers. How can I restrict traffic between different VLANs?

For example: Hosts in one VLAN shall only be allowed to access a web server in another VLAN. All other traffic should be blocked. I've created two VLAN with Inter VLAN Routing enabled. But it seems there's no way to install a firewall rule between VLANs.

View 12 Replies View Related

Cisco Switching/Routing :: Route Data From Vlan 10 To Vlan 20 On 2960s?

Mar 31, 2013

i need to solves this little problem on 2960S lan BASE but i dont know if it is possible.
 
Uplink port config for gi 1/0/28 is:
 
switchport mode trunk
switchport trunk alloved vlan 10,11
  
but on interface gi 1/0/1 i want to have data from vlan 10 tagged as VLAN 20.
At this time i have solved this issue very primitively
 
I have set up gi 1/0/2 as int mode acces, acces vlan 20 and i have connected gi 1/0/2 with gi 1/0/3 with eth cable. int gi 1/0/3 is switchpor mode acces, switchport acces vlan 10

View 4 Replies View Related

Cisco Routers :: Rv220W / Assign Vpn Traffic To A Vlan When Setup An Ipsec Tunnel?

Apr 7, 2012

i'm using an rv220W and i whant to know if is it possible to assign vpn traffic to a vlan when i setup an ipsec tunnel?
 
example:
Im using different vlans on my rv220W.
Vlan 10: engineers (ex: 192.168.1.0/27) no intervlan routing
Vlan20: sales (ex: 10.0.123.0/24) no intervlan routing
 
 This is what i need:  - An engineer is on the road and when he makes a ipsec vpn connection => assignd to the vlan "engineers" so he can access the server/pc's in that vlan.and when someone from the sales group starts a vpn connection he needs to be in the vlan "sales" so he can access his pc/data,...

View 15 Replies View Related

Cisco :: Cannot Route To Default Vlan (vlan 1) From Other VLANS

Jan 23, 2013

I've been given the task to clean-up our network config, and have walked into a disaster zone.We have a 4510R on site with everyone using the default VLAN, VLAN 1.I have created 4 new VLANS, VLAN100, VLAN150, VLAN200, VLAN250 I have assigned interface addresses to each VLAN and configured Inter VLAN routing.I can route to and from each new vlan with no problem, i.e VLAN250>VLAN100 VlAN100>VLAN200 etc but I can't route to VLAN 1(Default VLAN) from any of them, I can ping the interface on VLAN 1 from any VLAN , but any hosts are unreachable. On the flip side , from VLAN 1 I can route to all of the VLANS.

View 3 Replies View Related

Cisco :: Routing Traffic From Non VLAN To VLAN On Same Interface?

Nov 21, 2012

i'm going mad on following problem. I'm trying to get 2 networks seeing each other while one of the network is a non VLAN network and the other one is a VLAN network.They should use the same interface so i added VLAN e0/0.122 to the interface e0/0.Send a ping from my asa to both gw-IP's made me happy at first. In second in figured out that i cannot reach any client in the other network. For testing purpose i created an permit acl to any/any for both networks, but the packets still get dropped by the default implicit rule. (deny any/anyMaybe i'm to stupid for this

View 10 Replies View Related

Cisco WAN :: 881 Won't Route LAN To WAN Traffic

Nov 15, 2012

Configured cisco 881, WAN has static IP address and LAN is nothing fancy. I can ping out to url... or anywhere from the router but cannot from LAN client computers. [code]

View 4 Replies View Related

Cisco VPN :: ISA550 Need To Install On Windows 7 Laptop That Will Allow To Tunnel

Mar 26, 2013

Basically, I have SSL enabled on the ISA550.  I downloaded the AnyConnect software for my Android Samsung Galaxy S3 and I can connect to my LAN and the internet via the AnyConnect software from my phone when off site so that is working properly. My questions has to to with regular computer clients.  What do I need to install on my Win 7 laptop that will allow me to tunnel into my 550?  If I just put in the IP address in a webrowser [URL] I get this: "The Cisco AnyConnect VPN Client is required to connect to the SSLVPN server. Please contact the site administrator to obtain the VPN client." I also see a lot of talk about "clientless" VPN.  Is that also possible with the ISA550?

View 4 Replies View Related

Cisco WAN :: 2821 / Route FTP Down One T1 And All Other TCP Traffic Down Another T1

Apr 19, 2010

I have a 2821 router with two T1 WICs and have the need to route FTP down one T1 and all other TCP traffic down another T1. All traffic is going to the same remote IP address. The remote sites are in different states, and I assume that the remote subnet is being bridged between the states. It's kind of a weird set up, but it's not my design.
 
Anyway, can I use a route map to split off FTP traffic to host A and send it down one T1 and have the rest of the IP traffic to host A go down the other T1?  I also need to be able to have all traffic use one T1 in case the other T1 goes down.
 
My first thought was to static all IP down T1-1, then route map FTP traffic down T1-2, then have a floating static for all IP traffic down T1-2 with a higher metric. But something would have to track the T1 interfaces and I'm not sure if route maps or static routes can do that.  Any thoughts on this?

View 2 Replies View Related

Re-route Traffic Through Server?

Feb 23, 2011

I have a router that supports wireless network. I have 2 desktop computers that connect through LAN, 3 Laptops that connect using WiFi. Lot of them use utorrent. I want to block it. They use it to download movies. I have warned them of consequences but they simply dont listen. I dont know how to implement QoS in my router. Mine is UTStarCom.

View 1 Replies View Related

Cisco WAN :: Vlan Gateway Is Route-able From ASA 5580

Mar 26, 2013

I connected my intranet cable to coreswitch 4510 created one vlan 600,that vlan gateway is routable from asa5580.now my intranet people able to ping my vlan gateway but iam unable to ping their ip.i added static route on asa route inside 192.0.0.0 255.255.255.0 10.100.106.1 1 but iam unable to ping remote ip.

View 2 Replies View Related

Cisco VPN :: ASA5510 Can't Seem To Route Traffic To Both Interfaces

Sep 12, 2012

I currently have a site to site VPN running connecting a branch office and the Main office using a ASA5510 and ASA 5505. currently PC's at the branch can access the network in the main office using interface 0/1, but we have added another ip range using interface 0/2 and I can't seem to route the traffic to both interfaces. I currently have 0/1 as inside 192.168.10.1 which works, and have added 0/2 as Inside2 192.168.20.1. I know I am forgetting something, any commands to route incoming VPN traffic so PC's at the branch office can connect to both IP ranges?

View 14 Replies View Related

Cisco WAN :: 1921 Router Won't Route LAN To WAN Traffic

Feb 18, 2012

The router passes the Interface test for the WAN port in CCP but it still we cannot access the internet.  Here is my configuration:
 
Building configuration... 
Current configuration : 3663 bytes
!
! Last configuration change at 09:29:52 Chicago Mon Feb 20 2012 by fbcpekin
version 15.1

[Code].......

View 5 Replies View Related

Cisco Application :: Route GRE Traffic Through ACE20?

Jun 27, 2012

I want to route gre traffic through an ACE20, but it doesn't seem to work. The only thing I configured was an ACL with gre enabled, but the ACE20 seems to drop the gre packtes. The gre traffic is entering via the vlan 561 interface and should be send out via the vlan 472 interface. Source 10.94.32.212, destination 10.94.132.39. The tunnel control traffic on port tcp/1723 is working fine. In the service-policies is nothing configured for the gre traffic.
 
Code...

View 1 Replies View Related

Cisco VPN :: RV042 - Cannot Route Traffic In The Tunnel

Jun 6, 2011

I have a two RV042 VPN Router, I successfully connected the IPSEC tunnel. I cannot route Traffic in the tunnel. See the diagram.
  
MAIN Network 
10.252.x.x 
--------------> 
FIREWALL                       
a.a.a.1                                                   
INTERNET
RV042a     WANa       <<------------------------------->>    WANb    RV042b
 a.a.a.2                                                                            b.b.b.b 
   
In this manner the network of b.b.b.b wil connect to the Main Network 10.252.x.x, unfortunately I can't pass traffic to RV042b going to RV042a. Everytime I trace the route, the traffic goes outside the Internet not to RV042a.

View 1 Replies View Related

Cisco VPN :: 881 / Route Traffic Thru IPSec Tunnel To DMZ

Jun 29, 2011

I need to route traffic to DMZ (and internal) from the branch office thru the IPSec tunnel. How do I manage that with my Cisco 881?

View 1 Replies View Related

Cisco VPN :: 1700 / Route Traffic Over VPN Tunnel Like In GRE?

Jun 15, 2012

I'm station overseas and it's really hard to access certain websites and servie like Netflix or ESPN. What I had created was GRE tunnel from my Home "A" to my current location "B" and route my traffic from point A to B using 2 cisco 1700 routers ( and It was working great) but now I can't use GRE nomore. I still have PIX and ASA on both sides and I was trying to do that over VPN tunnel but I can't ping VPN tunnel gateway( basicly what was next hoop in GRE) on the other end ( which is the main problem why I can't route traffic to remote site). I was wondering if I can still do the same thing over VPN tunnel that I did with GRE tunnel.

View 1 Replies View Related

Cisco WAN :: ASA5505 Doesn't Route Any Traffic

Apr 23, 2012

I am trying to configure dual ISP on my ASA5505.I have everything configured and working when eth0/0 is connected, but when I disconnect it, it doesn't route any traffic.The static route for the primary isp is removed and the static route to the backup isp shows up, but no traffic goes in or out.  I should note that I'm doing this as a proof of concept so eth0/0 is connected to a router and eth0/1 is connected to another router. [code]

View 7 Replies View Related

Cisco VPN :: 881 / Route All Traffic Over IPsec Tunnel?

Jan 30, 2012

We have 7 remote offices and 10 tower locations that utilize IPsec tunnels back to our HQ. We now want to force all traffic including web surfing through the tunnels. What would be the easiest way to acomplish this? I have tried utilizing the crypto map policy to do this, but was unable to acomplish this.
 
Each of our office locationss utilize a Cisco 2811 router and the tower locations utilize a Cisco 881.

View 21 Replies View Related

Home Network :: How To Route All Traffic Only Via VPN

Aug 21, 2011

I am using OPEN VPN in order to connect to a Canadian VPN server.I want ALL internet traffic to ONLY use the VPN connection and no traffic shall pass through my local ISP under any circumstance.In the event the VPN disconnects, I DO NOT want any internet traffic automatically sent via my LOCAL ISP connection. Can I simply disable my LAN network adapter in windows AFTER the vpn is connected? (since vpn uses its own TAP adapter?)

View 2 Replies View Related

D-Link DIR-655 :: Route All Traffic From A Device?

Apr 5, 2012

I have a media player wired to my dir-655. I have a wrt300 on the same network to use for vpn. I live in Canada, and to use Netflix etc, from the US, I need to use the vpn.Is it possible to have the media player routed through the wrt300, rather than discovering all the IP addresses for Netflix etc and routing each one?

View 3 Replies View Related

Cisco WAN :: 857 - How To Route Traffic Over Remote Location Internet

Nov 18, 2011

I have a customer which has a main location office and a remote one. Recently we interconnect their facilities using a local ISP service called Virtual Connectivity, which basically is a private network which can be accessed over aDSL or any other data circuit. They are using Cisco 888 routers to interconnect both sites.At the main site the customer also has an Internet circuit (with a Cisco 857 router)and he wants to remove the Internet circtuit from the remote site and provide them access over their main location Internet circuit.At the primary offices, we installed Cisco 2811 router as a gateway to route the Internet and remote network traffic over the required data circuit. Everything is working fine, but we can not access Internet from the remote location over the circuit installed a the main site. I understand this is a routing issue, since the traffic hits the main office network it does not knows how to reach the Internet. I am assuming this routing must be set into the main office Cisco 888 router (installed by the ISP to interconnect to their private cloud) in order to properly route it over the Internet circuit.Since I already have access over the Internet router and the gateway router at the main site, but not into the ISP router, is there any other way I can make this configurtion over the routers I already have access?

View 3 Replies View Related

Cisco WAN :: 1941 / K9 / How To Route Internet Traffic Through MPLS

Nov 22, 2011

I am working for a company based in Sydney Australia, the company recently open an office in London UK, therefore we are going to get leased lined based on MPLS.We were advised that Customer Edge router will be CISCO1941/K9. We want to our UK client to access our web-based applications via MPLS network instead of internet. The UK office is using BT Business ADSL with 5 Static IP address (please note the modem IP address is actually dynamic), we are going to get a Cisco 857/K9 router which will be used for the entry for the UK client to access the MPLS network. My question will be how do I configure the Cisco 857 router to allow one of the public ip to access the MPLS network. It appears that there are two options, and I am not sure if this is going to work or which one is working better. I have attached two diagrams for clarification of my case.
 
Option 1 Cisco WAN interface get Dynamic IP (PPPoA) from BT LAN Interface (4 Port) get the assigned 5 Static IP addresses One of the five IPs (217.xx.xx.169) will be assigned to the FE1 (Cisco 1941), any traffic to 217.xx.xx.169 will be routed to the WAN interface of Cisco 1941 to access Sydney service (located in Sydney LAN, mostly http and https traffic) One of the five IPs to 217.xx.xx.170 will be assigned to the WAN interface of Sonicwall Firewall Router which also serve as Internet Access Gateway for LAN users, All trafiic destined for Sydney LAN will be using FE0 (Cisco 1941) as gateway
 
Option 2Cisco WAN interface get Dynamic IP (PPPoA) from BT LAN Interface (4 Port) will get 192.168.0.1, Cisco 857 router will be the default gateway for LAN users, using one to many NAT, also one to one NAT, One of the five IPs (217.xx.xx.169) will be forwarded to the FE0 (Cisco 1941), any traffic to 217.xx.xx.169 will be routed to the WAN interface of Cisco 1941 to access Sydney service (located in Sydney LAN, mostly http and https traffic)

View 4 Replies View Related

Cisco Wireless :: WRVS4400N Won't Route All Traffic Over IPsec

Dec 15, 2011

All of my remote sites use various routers to route all of their traffic via IPsec.  However, I have one WRVS4400N w/firmware 2.0.2.1 configured with a working tunnel.  My issue is I need to set the Remote Group to 0.0.0.0 0.0.0.0 so all traffic is forced via IPsec tunnel and not out the local gateway.  When I do the error, Remote Security Group and Local Security Group cannot be in the same network. However, it works with Cisco/Linksys RV042.

View 3 Replies View Related

Cisco VPN :: 5505 Unable To Route Traffic Through VPN Tunnel

Mar 17, 2011

We have a VPN setup and here's the configuration on the Cisco ASA 5505: [code] The problem is that i'm able to ping the otherside of the tunnel i.e. 192.168.23.14 from the dmz IP 172.16.1.2 but i'm unable to ping from the hosts behind the ASA.Also the other side is able to ping 172.16.1.2 IP but no IP's behind the ASA.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved