Cisco Routers :: EPC3925 Access Restrictions
Jan 11, 2013
I would like to be able to limit a group of users to certain sites but am encountering problems. I logged into the Cisco EPC3925 config menu, clicked on Access Restrictions and, under Basic Rules modified the '1.
Default' rule as follows:
I enabled Parental Control
Key word List: anonymizer (came up by default)
Blocked Domain List: *.*
Allowed Domain List: a list of domains, eg [URL]
On the tab User Setup I have the following:
'1. Default': no enabled
'2. User': Enabled, Content Rule: '1. Default'
'3. su': Trusted User: Enabled
When I log onto a website I am presented with a prompt asking me for username and password. I enter the credentials of '2. User' and proceed to a screen that tells me that I am logged in. My problem is that this user is able to surf to any website and not only to those in the allowed list.The firmware of my EPC is epc3925-ESIP-16-v302r125533-110811c.
View 1 Replies
ADVERTISEMENT
Feb 25, 2013
What happen to my router linksys e1200, after i update the firmware to the latest version "Access Restrictions" is change to "Access Policy". how can i revert it back to "Access Restrictions" do i need to downgrade the firmware?
View 2 Replies
View Related
May 17, 2011
WRT54G FW V8.00When enable an access restriction policy that blocks websites by keyword (facebook, twitter, etc) the policy works for a short time (< 2 hours) and then all traffic will be stopped. I can't even log into router. Power down and up is only way to re-enable the router
View 1 Replies
View Related
Mar 1, 2011
Is it possible to have a WLAN only be active during set times of the day?.I have a WLCM in a 2811 router but I can't find any type of setting that will let me enabe a WLAN at 6pm and disable it at 7am.
View 3 Replies
View Related
Apr 11, 2012
(ASA5510, ASA version 8.2(3)) I have set up split tunneling for one of our suppliers. When testing the setup the local computer with the VPN Client connects to the dedicated services it has access to behind the ASA, and the local computer can ping any computer on the local LAN and it can also access the internet and webpages on the local network
But the supplier complaints that he cannot run a local Navision session on the remote computer while connected to the VPN tunnel. I am not able to run a test that mirrors this.
I have followed the descriptions in document ID: 70917 in setting up the split tunneling, and as far as I can see, the setup works. But is there any restrictions laid on the local computer running the VPN Client in what services on the local network it can connect to?
View 6 Replies
View Related
Feb 7, 2011
I set the access restrictions as instructed but they refuse to work. Firmware version is :-1.01.05,have rebooted, with no success.
View 6 Replies
View Related
Nov 8, 2011
I recently purchased a WAG320N router and have issues with access restrictions. Internet is shut down regardless of the time set with the policy or policies. I am using firmware version V1.00.12. Tried rebooting router, restoring factory defaults & restarting IMAC to no avail. Timezone checked and OK.
View 5 Replies
View Related
Oct 30, 2011
I'm having problems with the access restrictions feature on the WRT600N. I do have the latest firmware upgrade, which was released in 2008 I believe. Anyways whenever I totally block a PC from the internet either by MAC or by IP, it affects the internet on the rest of the house. Logins to sites do not work right. Logouts from do not work right. Different features of different sites will not work properly. There also will be a lag sometimes when entering the url for a new site. But as soon as I turn the access restriction off, everything goes immediately back to how it should be working.
View 3 Replies
View Related
Feb 22, 2012
I have access restrictions set up for certain wireless devices in my home that the kids use to kick them off at 11 pm and keep them off all night. where I am running into a problem is I want to block these same devices from downloading anything without my permission my son downloads everything he sees, Comcat has already threatened to kick us off their service if we go over 250 gb bandwidth use in a month again. so I want to configure something in the router that will block all downloads for specific wireless devices. with the access restrictions I have set up I used the mac address not just the ip so they have no way around it I constantly monitor what is connected. I am using the stock firmware as well
View 1 Replies
View Related
Jun 26, 2011
How to time access restrictions with WRT120N router a wireless network?
View 7 Replies
View Related
Jul 24, 2012
I decided to limit some Internet time for the kids going off this router (which has been working great since set up) but my Access Restrictions tab is missing. I have an identical router at my work place, same version/firmware, same settings, but the one at work does have the tab.
View 6 Replies
View Related
Nov 24, 2011
I am trying to get a cell phone to have access to my LAN from 3am to 7am. I gave the policy a name, allowed access, checked everyday and the time 3a to 7a. Under edit list of PCs, I entered the MAC address of the phone, and I have also entered the MAC address of the phone on the wireless>edit mac filter list, though didn't know if I should.
View 2 Replies
View Related
Sep 2, 2011
I keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.
View 3 Replies
View Related
Apr 3, 2011
I am using a WRT150N with firmware v1.00.5. I have a Linux setup with Squid connected to the network with the gateway 192.168.23.254. The WRT150N has a gateway of 192.168.23.1. The WRT150N is also connected to an Apple Base Station which serves as the Access Point for WiFi users.Squid limits access for IP addresses listed under the .254 gateway. But once I change my gateway to 23.1, everything is accessible. I want to block sites as well on the WRT150N. But every time I try to put a new Access Restriction, it doesn't work.
View 4 Replies
View Related
Jul 28, 2011
I have set up several Website Blocking by URL Address & Website Blocking by Keyword that work as expected but the router seems unstable when they are in use and often reboots at random occasions.For example, last 2 crashes happened like this:
opened a website that wouldn't load because it contained one of the keywordsopened a new tab to go to http://192.168.1.1as soon as I hit ENTER router rebootedanother occasion:
Went to Access Restrictions and Disabled an Internet Access Policy (did not close the tab).Opened a new tab and went about my businesslater went back (to the already open router tab) to Enable the Internet Access Policyclicked Save Settingsentered router password againclicked OK and it crashed (rebooted)
WAG320N Firmware Version:V1.00.12
Firefox 5
View 1 Replies
View Related
Nov 30, 2011
I'm trying to set up access restrictions to specify the full url on my WAG200G (firmware 1.00.07). In particular to block a few specific https:// sites without blocking all https://. It it easy with http:// If I try https://blah.com it throws back an error invalid url.
View 3 Replies
View Related
May 28, 2012
I have an old WRT54G and the access restrictions really don't work. it's sloppy and ineffective.
i'm thinking about upgrading... perhaps to the E2500. Do the access restrictions now work properly? Am I able to allow access to a specific site only during certain times?
For instance, am I able to provide access to [URL] only during 6:00pm-9:00pm and block it otherwise?
View 6 Replies
View Related
Sep 14, 2011
I want to set up access restrictions to one MAC address (my kid's machine) basing on week days. From Su to Th allow less access time while during Fr-Sa afternoons access time should be longer. The question is how to program it in router. I know I can set rules with "allow" and "disable" keyword, but I don't know rules preference. When I set (Su-Th 6-21) allowed access time then router automatically denies defined machine internet access outside this time range. The problem is in the power of thus calculated denying time. I want to allow more access time in weekend, so I hoped if I can simply add "Fr-Sa 6-22:30 allowed access time" rule. I hoped that router will regard explicitly set time over inexplicitly set time but it appears it is not so. What are their preferences/priorieties, iis it possible to stack more rules affecting one MAC address or it is so simple that the first rule "rulez"? Is it possible to set more than one time rule affecting the one machine?
View 4 Replies
View Related
May 15, 2012
I had a E1200, I read the articles from the support about the routers, I think the "access Restrictions" has more flexible to setup on for the parental control, after chated to cisco support person online, I was told that the E1200 v2 has this "access restrictions" function, and I wan convinced to purchase from them. I did. I got the E1200 v2 recently, however, after I installed the CD and found there is no "access restrictions" tab, instead the "access policy" is still there. by the way the firmware is 2.0.02 now. How to get the "access restrictions" from setup? I've chatted with cisco support person twice again, but nobody can fix the problem, one suggested to restart and reinstall the CD. I uninstalled the software, restarted the computer and reinstalled the CD. same problem, no tab of "access restrictions".
View 6 Replies
View Related
Oct 25, 2011
we have two servers in our network, one functions as a file server (windows server 2008) and the other as a domain controller with active directory and some database applications running on it (windows SBS 2003). the file server has folders for the different units in our company, these are shared folders. these folders can be accessed by anyone with a domain login by running \servername from their computers, without any further authentication required.
i have tried to set up sharing restrictions with no success, for example the Accounts folder, i right click on it and select properties, and the sharing or security. under both tabs i added three names of those that i want to have access to the folder. these names appear in the sharing list together with:administrator(servernameadministrator) administrators (servernameadministrators) administrator systemeveryone has not been added as is the case with all other folders. what is this system on the list? how i can restrict access, perhaps there is a setting that i have missed or settings in the network that prevent these restrictions?
View 1 Replies
View Related
Jun 14, 2012
Access Restrictions option does not exist on my WRT160Nv3 Broadband Router Setup Page and I need to use that option.
View 2 Replies
View Related
Sep 12, 2012
Possible to set up access restrictions to Allow only specific websites?
View 1 Replies
View Related
Aug 25, 2011
How do I restrict wireless user from accessing download sites that slow my network?
View 1 Replies
View Related
Apr 18, 2013
Recently switched from WEP to WPA2 on the router and let it run a few days. Everything was copacetic.
Then decided to implement the following access restrictions:
1 - Target MAC based, internet blocked from 9-11:55 PM (why won't it let you block from 9PM-7AM ;-( ), blocks son #1's laptop, Kindle
2 - Target MAC based, internet blocked from 10-11:55 PM, blocks son #2's Kindle
3 - Targets IP Address range based (192.168.1.0 - 192.168.1.254), across all devices blocks several porn sites all the time
I can get on a play games online but when we start watching video with all 3 restrictions enabled, it will eventually disconnect (can take 1-5 minutes before it happens). Rebooting XBox usually reset connection, but it would happen again eventually. After disabling all restrictions, disconnects completely stopped.
Is it not possible to have Access Restrictions in place on a WR54G and still stream video?
View 1 Replies
View Related
Jun 29, 2012
I can't find info about Access Restrictions in new series of routers.[URL]Do new routers have both Parental Controls + Internet Access Policy? I need this [URL]
View 2 Replies
View Related
Jan 11, 2013
Region : Argentina
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
Region : Australia
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 110620 Rel.52053n
ISP : Amnet
I want to setup this modem wirelessly such that:
- Wireless User A has full unrestricted wireless access (to Internet and all other services) and
- Wireless User B has no internet access but access to file sharing and related services.
Can this be done and how can it be done?
View 2 Replies
View Related
Apr 23, 2012
I setup E4200 good. But, in Access Restrictions, there is no policy to choose from. Just Parental controls only.restore the Internet Access Policy like the good old routers?
View 1 Replies
View Related
Nov 18, 2011
I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".
View 5 Replies
View Related
Mar 13, 2013
I have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?
View 7 Replies
View Related
Dec 10, 2012
I would like to be able to use NAT loopback on a Cisco EPC3925 so that I can refer from my iPad to the webserver that is located on my iMac on the same LAN by using the external site name. Is that possible and if so, how can I configure the router?
View 2 Replies
View Related
May 26, 2012
I have a redundant Cisco EPC2425 that I want to use as a wireless bridge to connect to my current home router (an EPC3925).
I have got the channels/band/keys matching yet the 2425 is failing to connect to my home router. I have set the 2425 in bridge mode and currently can only set the wireless properties.
I have both ends of the supposed bridge referencing the other's MAC.
When I try to enter advanced settings on the 2425 I get a notice that the function has not been enabled.
What can I try to get these two boxes talking to each other?
View 3 Replies
View Related
Mar 5, 2012
I have an EuroDOCSIS 3.0 cable modem from UPC Romania. It's a Cisco EPC3925, wireless modem.
My problem is that most of the time (like 80% of the time) when someone is starting or closing a PC that is connected using a wire, the whole internet crashes (wired PCs get a ! sign and the internet stops working and wireless PCs are getting disconnected completely from the network being unable to reconnect). This is solved by restarting the modem (unplugging/replugging it) or waiting for it to reconnect. I want to mention that during this process the modem lights show that everything is ok and nothing special happens.
First of all I called UPC technical support and the man there said that I should try to disable the firewall from the modem (which I had disabled already), if it won't work then to try to reset the modem to the factory settings (as I was thinking to do - because I configured the settings as I wished) and if this won't work then calling them back to change the modem.
I tried to reset to the factory settings and that didn't work at all after running tests over one week. After that I called UPC and they said that the modem is for sure the problem, they sent a technician (today) who also said that the modem is the problem. Ok ok, the technician replaced it and everything seemed to be good.
30 minutes ago my father started his PC and what should I see? Bam, internet crashing. 5 minutes ago i closed as well my PC and what should I see? The internet crashing again.
View 19 Replies
View Related
Nov 1, 2012
I am trying to wireless repeat the wifi signal of my cisco epc3925 wifi modem. The router i am using as extender is a netgear wndr3700. i dont have much knowledge about these thing and am losing so much time by trying to get it working. everytime i apply the settings in the netgear i am unable to connect to it (even wired) and have to hard reset it...attached are some screen shots of both devices from last settings I tried.
View 6 Replies
View Related
