Cisco Routers :: RVS-4000 Dropping Ip Connections
Apr 25, 2012
I have my RVS-4000 configured using static IP addresses in the LAN configuration. The users use DHCP to get their addresses (for the most part, a couple may have static IPs set on the computer). I have the maximum number of DHCP users set to 1 to restrict the ability of people to log in to the system. That one address is locked down.
The internal address of the router is set to 182.168.2.1. It doesn't conflict with anything on my network. I have 35 static IPs. About half of them are uing IP Based ACL to limit their access time but that doesn't seem to bear any relationship to what drops off.
Almost daily one or more of the users will lose their IP address and a hard reset of the router is required. The user this happens to seems random and it may be more than one but seldom all of them. The network includes Windows7 (Home & Pro), a FreeNAS, Macs (Leopard and Snow Leopard), iPad, iPods, an iPhone and an AirPort Extreme used as a WAP (DHCP is disabled). The AirPort is plugged directly into the router and has a staic ip on the RVS-4000 but is set to DHCP. It seems to be the most common problem child.
View 3 Replies
ADVERTISEMENT
Apr 19, 2012
I have my RVS-4000 configured using static IP addresses in the LAN configuration. The users use DHCP to get their addresses (for the most part, a couple may have static IPs set on the computer). I have the maximum number of DHCP users set to 1 to restrict the ability of people to log in to the system. That one address is locked down.
Almost daily one or more of the users will lose their IP address and a hard reset of the router is required. The user this happens to seems random and it may be more than one but seldom all of them. The network includes Windows7 (Home & Pro), a FreeNAS, Macs (Leopard and Snow Leopard) and an AirPort Extreme used as a WAP (DHCP is disabled). The AirPort is plugged directly into the router and has a staic ip on the RVS-4000 but is set to DHCP. It seems to be the most common problem child.
View 1 Replies
View Related
Mar 13, 2013
I just recieved a new RV180 yesterday and it will not connect to my switch. Router was updated to the newest firmware, reset to factory settings. I did change the ip and ip range. Router works fine with one computer attached direct. As soon as I connect my sf300-24P to it, the WAN and LAN lights all light up and then go out. Only the WAN will light back up. I have no connectivity to the router. I plug the laptop to the router directly and no LAN lights come on and can not see the router with arp -a.
View 6 Replies
View Related
Aug 10, 2011
Model: WAP4410N-A V02
Firmware version: 2.0.3.3
Deployed 3 of these as WAPs. No repeaters. They are spaced at least 50 feet apart over three offices, each in a server or switch room.
Across multiple laptops, and multiple WAPS, the wireless will function fine for a while with good bandwidth..then the connection will simply drop. By simply resetting the connection on the laptop or turning the wireless off then on, the connection typically returns, at least for a period of time before it drops again.
I’ve tried these configured as three separate SSIDs on identical channels, as well as one SSID for all three with different channels (preferred for a seamless wireless), and the behavior does not change either way.Based on some other threads, I tried forcing the LAN port speed to 100 mbps, but the problem persists.
View 7 Replies
View Related
Jun 28, 2012
I have a cisco RV180 hooked up to a cisco cable modem and Cox service.
The basic symptoms of the problem are that every 10 minutes or so external connections will hang. This lasts maybe 20-60 seconds. If you're loading a website when this happens, various parts of it won't load and firefox will sit and spin indefinitely (it seems) until you manually stop the loading and click the reload button.
When this is happening I can still connect to the routers webserver and dashboard that auto-refreshes every 10 seconds. It seems perfectly fine. My initial theory was that something was broken on the Cox end of things, but after swapping out the RV180 with an old on-q router we had laying around, we haven't seen the problems.
Some other differences I've noticed between the on-q and the rv180:
* with the rv180 traceroute to external hosts shows a big delay (500-600ms) at the hop right after the router. With the on-q, it's 12ms.
* when I ping the ip of that hop with the large delay, with the on-q I get no responses. With the rv180 I would get these strange host redirect messages that make it look like that ip is redirecting to itself. There would be 1 or 2 of those redirect responses, followed by 3 or 4 errors, and every packet would be listed as an error in the ping summary.
View 16 Replies
View Related
Nov 11, 2012
A couple of days ago, after a suggestion in a old forum post (rv180 dropping connections every 10 minutes or so) I tried increasing the various session timeouts. This didn't seem to affect anything for the first day, but last night the router started becoming unresponsive (not responding to pings, but maybe continuing to route established connections.) After a couple minutes the router would be pingable again, and as soon as i could I reverted the changes I made to the session timeouts. That didn't seem to fix the problem. Logs showed many many warnings saying "nf_conntrack table full, dropping packet."
Then as soon as I got on the phone with small business support the problem seemed to correct itself. The only thing we changed was decreasing the MTU to 1472. It is strange that the MTU would make a difference all of the sudden, isn't it?
View 1 Replies
View Related
Oct 14, 2011
I am getting crazy with our Cisco Linksys RV016. It handles 3 simultaneous connections to the internet using 3 ISP. All our company goes to the internet using this cisco linksys RV016, our corporate switches are connected as clients to the router. Sometime ago, this router started to drop POP3 connections to our network, when this problems is present, all users get Receiving' reported error (0x80042108) in Outlook 2007-2010. Currently i have setup POP3 service to use the First ISP connection, but when this problem is present, the only way to eventually resolve it is to switch the link POP3 Service from the First to the Third ISP, sometimes it works immediately, sometimes don't. We are using this router since 2007 but this problems started to arise from this month.
Our switch is the latest firmware available is Cisco website, this is the Firmware Version: 3.0.2.01-tm.
View 5 Replies
View Related
Jul 24, 2012
We have a newly-purchased RVS4000 v2 with firmware v2.0.2.7. Its intended role is as a gateway between our local network of wired workstations and a Cisco 2800 series Integrated Services Router, which is at the receiving end of our T1 line. It is configured with static IPs on both the LAN and the WAN side. It does NOT serve DHCP for the LAN. Ever since I installed it, I have had repeated complaints from users of Vista and Win7 workstations that they lose internet connectivity about every 20 - 30 minutes or so. The only solution is to unplug the workstation's CAT5 cable, count to 30, and plug it back in. Then everything's hunky dory for another 20 - 30 minutes. Meanwhile, all our Windows XP and Linux workstations enjoy uninterrupted internet access. The router/gateway we replaced (a DLink DIR-130) never had this problem.
View 4 Replies
View Related
Jul 8, 2008
I recently purchased a rvs 4000 wired linksys router for my business. Everything works great with the exception of my VOIP PBX server. I can receive a call and make a call one at a time. If a second line rings in and is picked up the first call and the second go dead air. I am sure that it is a security setting somewhere that I just can't seem to figure out. I sure would like to get some direction on this.
View 2 Replies
View Related
Feb 21, 2013
System Information Firmware Version:V2.0.2.7CPU:STAR 9202 Router is operated 2y. No problems till now.There is sometimes abnormal lost of Internet connection, detected by LAN devices. I found it 3 days ago. This dysfunction is occasional 2-5 per day in occasional time.Nothing was changed/upgraded/updated in my WAN cable router or LAN or in the Cisco router. Nothing was changed on computers site (OS,LAN cards, drivers, ...). Just the problem is discovered on the router side.LAN operatation is correct, no problems was founded. Just the devices on LAN lose the internet connection (Win7, Lnx, Mac).
This is status of my WAN - does not matter if the internet connection was lost or not. It is still same:
STATUS-WAN/Gateway
Interface: UP
IP Address is assigned (checked by provider - correct)
Default Gateway and DNSs are assigned too(checked by provider- correct)
What was checked by me:
1. A. I disconnected the cable router from Cable modem
B. I connected the Cable router directly to laptop. Internet connection was right.
2. I called to my Cable provider to check my connection:
- with direct laptop connection to Cable router - Right
- with Cisco router connected to Cable router - Right, but no Internet connection on LAN side behind the Cisco router
3. Standard procedure was tested:
- Unplugged (electricity & cabling) all devices - Cable modem, Cisco router as well.
- Restart of Cable modem, +30 sec. connection of IP cable to Cisco router, start of Cisco router Still same. No Internet connection.
- SETUP/SUMMARY/Network Settings Status - DHCP Release or DHCP Renew was tryed - Still same.After several minutes - was Internet connection Renewed. Just by itself. how?
View 1 Replies
View Related
Mar 10, 2012
I attempted to load RVS4000_WRVS4400N_IPS_Signature_v1.50.zip and received an error message "Signature file is not the correct type of version for this device". I have firmware version 1.3.3.5, and and current IPS version 1.42. why IPS v1.5 is rejected?
View 1 Replies
View Related
Nov 16, 2009
I'am using a modem/router to conncet my lan to internet. unfortunetly it is impossible to switch off the router of my modem. So i connect my RVS 4000 on the modem/router and i assign it static ip 192.168.1.10 as my modem has 192.168.1.1. i disable the DHCP function on my RVS 4000. I m still using it because of its gigabit ethernet capability.
My problem is i am unable to connect to my RVS from the outside. inside the LAN no problem I just use its STATIC IP. I have a NAS on this LAN. I write a NAT/PAT rule in my modem/router to route HTTP and FTP and the port for the interface to my NAS. It's just working smoothly. But not for my RVS. I have checked the remote management and translate the traffic incoming on this port to the same port on the 192.168.1.10.Unsuccessfull !!. ok that can't be considered as external traffic.so I disable remote management and all the protection firewall, DOS,BLOCK WAN REQUEST. I route the HTTP port 80 to port 80 192.168.1.10. I try to connect to /home.htm....unsuccessful !!
View 17 Replies
View Related
May 13, 2011
I recently updated my network with the following:
RVS 4000 v1.3.2.0 - Linksys by Cisco version
SG200-26
AP541N [WAP]
All devices have the latest version of firmware.Users only connect laptops via wireless, they are a mix of MAC and Windows users, devices such as printers and network storage are all wired connections.The RVS 4000 would drop the internal Lan after several hours or sometimes days, there would be no reason to the periodicity it would retain and then drop the LAN. By dropping the Lan I mean:
Internet Access would cease, devices such as laptops would lose their wireless connection, a laptop requesting an IP address would be ignored. Effectively we were down.Connecting a laptop to the network via a cable connection would eventually get an IP address but all other wired devices such as the NAS Storage and printers would be unreachable and require powering off and on to get an IP.
A reboot of the RVS 4000 by powering off the router would have to happen to restore the LAN quickly. I followed advice on the Internet and this forum by upgrading the firmware and resetting to factory defaults and then reloading the configuration.The only change that seemed to make any sort of differnece was connecting the AP541N directly to the RVS 4000 rather than the SG200-26. Throughput increased and the period between LAN drops extended but the RVS 4000 would ciontinue dropping the LAN eventually.
When it dropped the LAN during a work day, that was it!I read a lot of negative feedback on the version of RVS 4000 firmware and as the version 2.0 will not install I purchased the Cisco version of the RVS 4000 v 2.0.0.3.
The new RVS 4000 also drops the LAN! The period between drops is much longer, but it still drops the Lan.Ventilation is good and it is sitting on its edge using the platsic feet that come in the package.The AP541N is still directly connected to the RVS 4000 rather than the SG200-26.how to fix the RVS 4000 or an alternative... I would like to stay with Cisco, an alternative, if the RVS 4000 is unfixable should have a browser based admin facility!
View 4 Replies
View Related
Nov 26, 2011
I would like to block IP numbers. When I tried with one the router festively walked straight through it!
View 6 Replies
View Related
Oct 26, 2011
I have an RVS 4000. I have several PC's to which I have assigned static IP addresses. I have recently upgraded most of the PC's to Win 7 (64) machines. I updated the firmware on the RVS4000 to 1.3.3.5 in conjunction with this. After such update (and actually before as well) I could not assign a static IP address to a PC and have access to the internet. It connects fine to my LAN, just no internet access. This is also affected on several other machines running Win XP and Win 2003 Server, so it's not just this computer.
I have:
1. Shut down (powered off/unplugged) everything, router, DSL modem, switches, server, etc.
2. As I said firmware is current.
3. Yes, DNS servers and gateway, subnet, etc. are all correctly specified on the PC.
4. Router is set for gateway mode.
5. Set to only IPV4.
The only way it allows internet access is to use DHCP. I've even tried taking the IP address via DHCP and manually assigning the DNS servers and that works fine, but as soon as I assign a static IP internet access is immediately gone.
There must be something I'm missing, but I can't seem to find it.
Everything worked fine prior to the conversion of the Win 7 machines, i.e. I had several PC's with static IP's and no problems.
View 1 Replies
View Related
Nov 29, 2011
After configuring the router and enabling a load of functions to secure our LAN, the download speed halved! Even disabling AcitveX "eats" 10Mbs! I understand that enabling IPsec will drag the speed down to 25Mbps, but I have disabled this.
Even setting the QoS to speeds equal or higher then the ISP's promissises drags the speed down!
View 2 Replies
View Related
Dec 16, 2011
how to establish tunnel between rvs 4000 and rv042 ?
View 2 Replies
View Related
Jan 4, 2012
RSV 4000 bundle with IPSECVPN. Any additional license for IPSECVPN ?
View 2 Replies
View Related
Jan 17, 2012
This type of issue has been posted time and time again by others. In this particular instance the ability to deny and allow access based on a time and day for one or more MAC id or IP address or range of addresses does not work. Because the code is so "weak" that it cannot handle a policy which passes the midnight threshold into the morning (the test is actually commented out in the code), one is forced to write one, perhaps two inverse permit rule(s). In this case, it cannot be done because the "allow" radio button is stippled out.
Some simple digging reveals that the file AccessRes.htm gets to the browser with the "allow" radio button stippled out because the token "disabled" appears in the generated html.
<input type="radio" value="allow" name="f_status2" onclick="setBLOCK()" disabled="">
I have several of these devices. They are all new V2 units. They all have the latest version of the firmware and they are all broken the same way. This behavior is the same on various flavors of browser. As an experiment, based on SOP responses I've read, I downloaded and flashed with the latest firmware (same version as delivered), and then performed the factory reset. No change. It's broken.
View 1 Replies
View Related
Mar 10, 2012
My RVS 4000 v1 router firmware version 1.3.0.5 has been intermittently going off-line ... a reset of the power resolves the issue temporarly. My plan was to update the firmware but I haven't been able to download an uncorrupted version of the firmware file on the Cisco support site. The file downloads as a zip file but the winzip program says that the file is not in a valid zip format and cannot open it.
View 1 Replies
View Related
Jul 25, 2012
I have HP laserjet 4000 tn. Had an old router and upgraded to a new wireless router, when connecting it to the new router, the port I connect to has the amber light come on. I have reset to factory setting thinking it would reset and capture a new ip address. still giving me problems. try connecting it to my macbook pro and cannot get a "fix" on the printer either. I know it has to do with the configuration of the printer.
View 3 Replies
View Related
Oct 3, 2011
We have an RVS-4000 router that we use as an Internet gateway on our school network. I am trying to set up an Internet Access Policy to block some specific websites by URL using a domain name. I set up the policy, and added a PC to the list using the mac address, and the blocking did not work. I went back to the list and added the IP address of the same PC, the policy still did not work to block the domain. I rebooted the router, cleared the Internet Temporary files and history on the PC, and the policy still does not work. It acts like it is going to block access to the website because it takes a long time, but it will eventually connect.
View 7 Replies
View Related
Oct 28, 2011
A lot of the time webpages hang up and don't load.. errors out etc.. I keep unplugging the router and plugging it back in and this makes it a ton better for a little while.. however.. I can play games like BF3 on 64 man servers and not lag/spike/disconnect or anything.. I am baffled as to why I am having such issues with web browsing
View 1 Replies
View Related
Nov 23, 2011
I just set up a new DIR-601.Now, whenever I make a VPN or ssh connection, it gets dropped, always after about 3 minutes.
View 6 Replies
View Related
Dec 1, 2012
This is the RVS 4000
Firmware version 1.3.3.5
STAR 9202 Chipset
64 MB DRAM
8MB Flash
DOS, Block WAN Rq, Remote mgmt all OFF
IPSec Tunnel none used
[code].....
Every day or so the Router becomes unresponsive to the HTTP mgmt interface, as well as it no longer offers DHCP services.then this happens the only remedy is to power reboot.
Everything comes back online just fine, however, the LOGS are initilaized so no data to figure out what`s going on.My next step is to setuo a syslog server and have the logs copied out.( No, I have no Torrents running at all, but I do have several devices like AppleTV, PS3s etc that run streaming Video plus I have the SPA3102 )
View 1 Replies
View Related
Mar 6, 2013
I have 2 AP541N's set up using a WDS bridge, broadcasting a single SSID. I am using WPA-PSK for the bridge and WPA/ WPA2 and CCMP (AES) on the SSID. I only have around 75 (Mac, PC, iPad, iPhone and Android) devices that use wireless. Some are laptops that roam around from AP to AP, and are using LAN when they are not roaming. I have increased the roaming agressiveness on PC clients and this doesn't seem to have resolved the weak connection. At most, I have 50 clients trying to access the wireless at one time. My problem is that they keep on dropping the connections and have real problems reconnecting once it's dropped. After 4 or 5 tries, they may or not be able to reconnect.
View 1 Replies
View Related
Apr 24, 2012
Randomly the internet connection for either my, my son's , or my husband's pc drops. This also can happen with the X-box. The router lights indicate it is working and the rest of the connections will be fine just randomly any one of ours will fail until we reset the router. Two of the pc's are wired, one is on a plug (devlo) and the xbox is wireless. I phoned BT, our isp, who sent an engineer out. It turned out the BT rep told the engineer I had reported no dial tone on my phone line and if I had allowed them to investgate this fictitious fault it would have cost me £150 for a call out.
View 4 Replies
View Related
Aug 22, 2011
I've got a DIR-651 that does one of two things regularly:
1--drops all wireless connections momentarily, then re-establishes them (happens multiple times a day)
2--drops all wireless connections and has to be reset (happens every 0.5-2 days)
#1 wouldn't be a big deal, except that I keep VPN connections on two systems and have to re-establish them every time this happens. I should probably also note that this happens even on the weekends, when those two systems are not VPN'd in.
It has done this since day 1, and the firmware update did not work.
What HW version is your router? A1 What FW version is currently loaded? 1.01NA
What ISP Service do you have? Cable What ISP Modem do you have? Stand Alone What ISP Modem make and model do you have? Scientific Atlanta 2203C
Ensure DNS IP addresses are being filled in under Setup/Internet/Manual? done Turn off QoS options. done Turn off Advanced DNS Services if you have this option. done Turn on DNS Relay under Setup/Networking. done Setup DHCP reserved IP addresses for all devices on the router. done Ensure devices are set to auto obtain an IP address. done Set Firewall settings to Endpoint Independent for TCP and UDP. done
What wireless modes are you using? mixed B/G What security mode are you using? WPA-Personal What wireless devices do you have connected? 3 laptops, 1 desktop, 2 Blackberries, 1 printer Any cordless house phones? yes, DECT 6.0. Did not interfere with previous Netgear or 2Wire routers. Any other WiFi routers in the area? up to 5 others, but they are all far away and my house has thick stone exterior walls
View 7 Replies
View Related
Mar 5, 2012
I've got a problem on 887VAMG router. It drops important connections. As customer wants to have a firewall I created ACL and ip inspect rules ,but the router drops their connections to cloud and some websites are not opening. So I removed ACL and most ip inspect rules just to test if it effects that. And left only ip inspect http urlfilter. But still they have those problems, so I'm really stuck how to configure that firewall. The below some dropping connection review:
%FW-6-DROP_PKT: Dropping tcp session due to RST inside current window with ip ident 13968 tcpflags 0x5014 seq.no 1629693318 ack 1687676045
000049: Mar 6 11:49:21.324: %FW-6-DROP_PKT: Dropping http session <ip>:1766 69.171.242.12:80 with ip ident 26247 tcpflags 0x5018 seq.no 264144210 ack 642133125
000050: Mar 6 11:50:00.774: %FW-6-DROP_PKT: Dropping http session <ip>:4708 69.171.242.12:80 with ip ident 2425 tcpflags 0x5018 seq.no 3819869211 ack 1862176018
000051: Mar 6 11:50:52.515: %FW-6-DROP_PKT: Dropping http session <ip>:2599 173.194.34.90:80 due to RST inside current window with ip ident 22909 tcpflags 0x5014 seq.no 899975979 ack 92642430
[code]....
View 1 Replies
View Related
Jan 22, 2012
I'm having a problem with my clients dropping the network connection constantly throughout the campus. I am using a Cisco 5508 controller and the APs are LAP1141N. At first I thought it was a roaming issue but I tested with only 1 AP and the problem persisted, I can tell you that we don't have interference problems and that our old linksys APs used to work without flaws.
View 1 Replies
View Related
Jun 4, 2012
I have recently setup one stand alone aironet 1140 with mostly default settings with WPA key. but, it seems sometimes it's dropping the connections. hardly 15 users are connecting to aironet at the moment.
View 2 Replies
View Related
Apr 26, 2012
We have with AP541N-E-K9 on the latest firmware.
Our AP541N-E-K9 keeps dropping all WLAN connections and will not allow us to connect via WIFI. I have to switch the unit off and on but even so sometimes it will take 10 mins for the WLAN to accept new connections. Nothing has changed on the network for months as it is a very basic scenario ie Draytek DSL Router -> Cat5e cable -> AP541N-E-K9, thats it! The AP is really only used for guest access and may have about 15 staff connected via WIFI at any one time.
View 9 Replies
View Related
Feb 8, 2013
After 5 years of services my DIR-655 begun acting up yesterday; first of it begun by getting REALLY slow, it could take up to 25 seconds to login into the software and up to 30+ seconds just going from one menu to another, on some instances connection (wired) to the router was lost. This morning it started dropping all connections, wired or not; first my iphone then my WDTV, after that it's been pretty much random connections. On one given moment wired works but not wireless, then wireless works but not wired and sometimes I get both but for 3 or 4 minutes.I've reset the router to factory settings, plugged/unplugged, changed cables, network adapters on desktops and the problem persists.
DIR-655 A2
FW: 1.35
Connection: ADSL
View 2 Replies
View Related
