Cisco Security :: CSACSE-1112-K9 - V4.2 - Configuration / Device Recovery
Jun 7, 2012
I have a problem exporting the config from a 1112 appliance. It does not boot up properly. GUI logon and authentication is not possible. I can console and SSH to it but the only thing i get is the commands below and nothing else.
login as: admin
admin@10.10.1.126's password:
Last login: Wed May 30 11:11:42 2012 from jsmith
Could not chdir to home directory /home/admin: No such file or directory
acs>
API called before initialised at V:ismg_israel_acsAcsEndPointCoreendpoint.cpp:395
Command Description
----------------------------------------------------
? List commands
exit Log off
help List commands
csutil -dumpadmin Dump Admin Audit Information
csutil -dumpgroups Dump Group Audit Information
csutil -dumpusers Dump User Audit Information
csdbsync -syncnow RDBMS synchronization
View 5 Replies
ADVERTISEMENT
Dec 19, 2012
I have a problem exporting the config from a 1112 appliance.It does not boot up properly. GUI logon and authentication is not possible.I can console and SSH to it but the only thing i get is the commands below and nothing else.Could not chdir to home directory /home/admin: No such file or directory
View 2 Replies
View Related
Mar 19, 2012
how to go about getting a copy of ACSse-v4.2.0.124-1112-recovery-K9.iso? The product is now obsolete so I can't get a copy from Cisco TAC. I need to rebuild an ACS that has lost some files.
View 3 Replies
View Related
Apr 25, 2011
I am trying to reimage a Cisco MARS 25 appliance for the pnadmin password recovery procedure. I am trying to boot the system with Recovery DVD (Version 5.3.2) shipped with the appliance. I connected a VGA monitor and USB keyboard to the appliance and when I do a reboot, I can see the Installation options. Please Choose A MARS Model To Install...
1. Distributed Mars - Local Controller But I am not able to select the Option 1 for the reimaging of Local Controller since my keyboard is not responding for the selections. During the LILO boot process, I can see some error message that 'Keyboard Not Present'. I tried to connect the keyboard to different USB ports and the PS/2 port using a USB to PS/2 adapter. Still keyboard is not functioning.I am able to select the BIOS options while connecting the USB keyboard to appliance. But it is not functioning when booting from Recovery DVD. Also the keyboard is functioning if I boot the appliance directly with previous image. Unfortunately I dont have any PS/2 keyboard available for connecting and admin password for Login.Is there any workaround/solution for supporting the USB keyboard during the Recovery Procedure ?I tried the serial connection with hyperterminal but some junk charaters appear even after setting the recomended Baud rate, parity, flow control etc.The Ethernet console seems not working with the default IP address 192.168.0.101 for eth1.
2. Distributed Mars - Global Controller
3. Mars Operating System Recovery
4. Quit
View 5 Replies
View Related
May 1, 2012
i need to recover a router Cisco 2801. I lost the password and the "no service password-recovery" is configured. I have done many attempts with the procedure in this link :URL
View 9 Replies
View Related
Jan 11, 2012
I have to migrate two appliances ACS SE 1112 under 4.0.1 to new two appliances ACS SE 1121 under 5.2 version.I would like to clarify the procedure to do it by minimizing down time impact.I saw there are Migration Utility and Import Tool but do I need an Intermediate Windows Server to do this migration ?
View 1 Replies
View Related
Jan 16, 2012
Can we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies
View Related
Jun 30, 2011
I just just purchased a CSACSE-1113-K9 and I need to wipe the Administrator password. I am also not sure what the default login credentials even are. There doesn't seem to be much out there for this device or maybe I'm just looking in the wrong place?
View 13 Replies
View Related
Mar 9, 2012
Having CSACSE-1113-K9 with ACS 4.2.15.I want to configure windows user database under extrenal user database but i get an error (attached) 'An error has occured while processing the Authen DLL Configure pagebecasue an error occured.I tried to stop the services and start agian but the same issue. The eappliance is secondary (backup) ACS. On the primary it is working fine.
View 1 Replies
View Related
Apr 2, 2012
I have 10 AIR-LAP1131AG-A-K9 connected to a 4402 controller. I have a couple of questions:
- When I go into CONFIGURE/ACCESS POINT, one of the AP's has the message "**Configuration is different on the Device**". How do I connect directly to the device to check the settings? I tried to telnet but that didn't work.
- Are these access points capable of acting as a DHCP server? If so, where can I check this setting? I have workstations that are unable to pull an IP address from my DHCP server running on a Windows server. I want to make sure the AP's and/or the controller are not the issue. The clients see the SSID and the signal is strong, but when they connect they get limited network connectivity message and the IP addr is 169.254.97.123 (which is wrong).
View 3 Replies
View Related
Feb 4, 2012
Yesterday, myself and local support team has been engaged to perform troubleshooting the issue of some web site accessing .Mos of this case is cased by MTU issue, So, I've tried to configure the following configuration on interface tunnel 0.Device: Cisco 7609 with IOS s72033-adventerprisek9_wan-mz.122-18.SXF8.bin
I've tried to figure out what the supporting command after 'ip tcp' in tunnel 0 and following likes..ip tcp ?compression-connections Maximum number of compressed connectionsheader-compression Enable TCP header compression.there is no such command about 'ip tcp adjust-mss.So, my questions is that what is the replace command for 'ip tcp adjust-mss' ? Is this only support on Router? such as Cisco 7200. or not, to take effect same functional on C7609, what is the command for that?
View 3 Replies
View Related
Mar 6, 2012
Is it possible to create a job what automatically export the devices configs that are in the folder CSCOpxfiles medemushadow? It would be wonderdul if CW could export the .cfg files into a .rar and send in email or something like this.
View 1 Replies
View Related
Jul 28, 2011
I'm using cisco LMS 4.0, I've discovered the device and next plan is to collect the device configuration.I would like to know, How I can collect the configuration for single device.What configuration changes required on my LMS & Cisco device.
View 1 Replies
View Related
Apr 30, 2012
Is it possivble to have 10 security licenses, license to a Cisco 5510 and have them transfeered to a Cisco5520?
View 1 Replies
View Related
Jul 6, 2012
How do i copy the configuration file from a switch to a storage device (USB)
View 1 Replies
View Related
Feb 28, 2011
i did a reset on my asa by stopping the boot process because i could not remember what my enable password was, i had no problems with the reset the asa came backup as it should and i started configuring the device again. My problem is when the device is powered off and back on i lose all configuration that were made, i save the changes with "write me" before the restart and they are still being over wrote.
View 4 Replies
View Related
Jul 25, 2012
we just replace 6500 with N7K, after migration there're some device (server,pc,printer) change its ip address configuration (subnet and gateway) by it self. can N7K did it?
View 6 Replies
View Related
Nov 20, 2012
When trying to view the status in the Monitor tab and the Config tab after you log in to the ACE 4710 Device Manager A5 (1.2) management GUI tool, I could not retrieve the status data and the following message appeared.
"Faild to upload Adimn configuration: There is error in loading configuration: Error in loading RMO config from DB:The given index XXXXXXXXX.bak does not match table index definition"
Other features include all normal, so I can get information by using the CLI.In addition, this configuration is redundant in the Primary / Secondary, this event occurs only on the Primary.
Other:-XXXXXXXXX.bak is a backup that you created in the checkpoint, and it does not already exist.
-When I'm logged on to the GUI, the above message is displayed in the status bar always.
-It was not recovered by ACE restart it.
-When I try to create the same configuration in a different environment, it did not reproduce.
View 2 Replies
View Related
Jun 19, 2012
This is IOS 15.1(4)M3 on a 1921 router. The LAN is 192.168.42.1/24. (DHCP config is further down.) We have a small range that we want to assign via DHCP to devices; .200 through .220 . At the same time, we have a handful of Macintosh systems to which we want to assign a specific address that is not in that 200-220 range. I don't want to configure the assignment based on the Ethernet MAC addresses because these systems might connect via UTP or wireless; that is to say, they have more than one MAC address. They only ever connect using one interface/MAC address at a time, but it's their choice; in some areas wi-fi is available, and in some areas they have to cable-up.
The Mac OSX network settings has a field for "DHCP Client ID". It would be much easier to tell the users of these systems to put their Mac's name in the Client ID field for both their wired and wireless DHCP configs. (As opposed to having them all lookup, and then give me their Ethernet MAC addresses for both of their interfaces.) I tried this with my Mac's (named "shrike") wi-fi interface, but I don't get the 192.168.42.14 address that I expected. I get an address from the .200 to .220 range.
Here's the DHCP-related config from the router:
router#sh run | s dhcp
ip dhcp excluded-address 192.168.42.1 192.168.42.199
ip dhcp excluded-address 192.168.42.221 192.168.42.254
ip dhcp pool OurOffice
network 192.168.42.0 255.255.255.0
[code]....
Is "client-name" the wrong place to configure the DHCP Client ID?
View 3 Replies
View Related
Jan 24, 2012
I am trying to change the security on my router so I can use WPA2 AES security in conjunction with a media device. The router security page only gives me a choice of WPA2 Personal or WPA2 Enterprise (which requires the use of a Radius Server that I don't have).
View 1 Replies
View Related
Dec 17, 2007
When ever I create a network object in ASDM 6.0(3) the UI also wants to send the command 'asdm location (network object IP address)' to the device.What is the purpose of 'asdm locaction ....'? Is it telling the ASA-5540 that the IP address is allowed to connect to the device using ASDM?If that is the case why does 'asdm location xxx.xxx.xxx.xxx'get denerated for every network object I create?
View 3 Replies
View Related
Apr 7, 2013
This is regarding CISCO logging configuration.We palnned to implement enable logging on all the cisco nexus switchs.we are running HP arc sight in our DC this device monitor all the CISCO devices.We want to enable logging with this Arc sight device.Just I would like to know about config commands for Nexus device, what is the command to enable logs which is include "who is login & logout?, interface down information?,who was did conf t ? & every logs"
View 8 Replies
View Related
Aug 29, 2011
I try to configure PGM in my 2911 plattform but it was impossible. I tried with many 15.1 version that support this protocol.
Someone configured PGM over 2911 Routers? What does correct IOS for work?
View 4 Replies
View Related
Aug 18, 2011
Our client ( a webhost, they have a lot of servers ) has a an older Cisco Pix, everything works fine with the PIX. They have a Cisco ASA 5500 with ASA version 8.3 , to replace the PIX. Upon migrating the PIX config to the ASA we are running into issues with Dynamic NAT. The static NAT entries are working flawlessly (there is a lot of them), however when Dynamic is enabled for the remainging hosts, outside communication works then drops off. The remaining hosts need outside access for updates. We have access lists set up but I dont se ehow that could cause a problem when the original ACL's were working fine with the PIX, they have not been altered.
The NAT config may be wrong or cluttered, have a look at the full NAT config.
The static NAT addressing is the same, example 207.11.129.65 will equal 10.10.10.65
View 1 Replies
View Related
Jan 8, 2013
saw that we can secure ripv2 via authentication (simple and MD5) ,i undertand that simple is not quite secure because we can see the plain text when capturing RIP packets
however even with MD5 i can see the authentication data (output of MD5) and i think hacker can copy it and paste it in one RIP packet that he will generate !! isn't it ? so how much MD5 is secure ?
View 1 Replies
View Related
Mar 10, 2005
I was given a 510 PIX Ver 6.3(1)to reconfigure but have no information on the existing configuration and need to wipe it clean and start over how can I do this to get back to the factory default settings. I have tried the "monitor>" but I don't know the IP address of the PIX interface.and am not sure how to do the setup for recovering the password.
View 7 Replies
View Related
Mar 22, 2012
We have had an ASA5505 for close to two years. About a year ago, we added a second ISP ("BOB") which became our primary and our old one (SBC) became our backup. I successfully modified the config for this and it's been working well.
Now we're changing our primary ISP to Comcast and getting rid of BOB, so right now we actually have 3 ISPs coming into our building.
I removed the BOB interface and routes, then added an interface for Comcast using an IP address from the range they provided as well as a static route to the gateway they provided - everything is analagous to the previous interfaces and routes, but it doesn't work. If I physically disconnect the Ethernet cable going to the Comcast cable modem, then the ASA does fail back to the SBC interface as expected. If I put the BOB interface & route back in there, it works again through BOB.
If I connect a PC to the Comcast cable modem and use an IP/Gateway they provided, the Internet connection *does* work. Using this same exact IP info in the ASA doesn't work.
Is there some other configuration item besides interfaces and static routes that I should be modifying? Is there some way I can dig deeper into the ASA to see exactly what is failing?
View 2 Replies
View Related
Oct 23, 2011
I save the configuration in the ASA 5505 using write memory or using copy run start but whe i unplug the power cord and plug it back in the ASA gets its factory default configuration.. then what i do is a copy start run to get the configuration active..
View 2 Replies
View Related
Jul 3, 2011
I have got a working 5505 running 8.3.1 firmware and 6.3.1 ASDM.I have now purchased a second unit and ensured that both units are running the same firmware levels etc.
I have via the ASDM created a backup of the working units configuration, and now i want to load this configuration onto the second unit.I have connected the consiole cable up to the second unit and tried pasting in the contents of the configuration file but no joy.I want to ensure that my configuration will work on this unit before i configure the two units in Active/Passiove configuration.
View 1 Replies
View Related
Feb 15, 2012
I used my Pix config to setup the ASA 5505.Everything seems to be right. I used ASDM to view settings and it seems right. I am missing something minor, but I am going blind looking at it.
I can remote into the network from outside, but internatlly I cannot get out of network. No internet or email is passing through.
: Saved
:
ASA Version 8.2(5)
!
hostname textasa
domain-name testcorp.com
enable password 579oWRzSY5syo9yt encrypted
passwd 579oWRzSY5syo9yt encrypted
[code]....
View 5 Replies
View Related
Aug 21, 2012
i hav asa5520 i copying configuration from PIX to ASA5520 (7.2) everything working fine bt problem is that after sometime my DMZ interface losing connectivity ...
View 1 Replies
View Related
Feb 24, 2012
How to set upo configuration & Security after reset
View 2 Replies
View Related
May 18, 2011
i just deployed Cisco NAC version 4.8.1 Virtual Gateway OOB on a LAN envieronment and on a WLAN envieronment, it works fine for some users , they can authenticate via the agent or web page, and then they are redirected to the access vlan, But for some other users in LAN and WLAN , when they try to authenticate via agent or web page the following error appears:
Invalid switch configuration-OOB Error:OOB client "mac/ip" not found.
I tried to find some pattern for the users but it dont match any pattern.
View 14 Replies
View Related
