how to go about getting a copy of ACSse-v4.2.0.124-1112-recovery-K9.iso? The product is now obsolete so I can't get a copy from Cisco TAC. I need to rebuild an ACS that has lost some files.
View 3 RepliesI have a problem exporting the config from a 1112 appliance. It does not boot up properly. GUI logon and authentication is not possible. I can console and SSH to it but the only thing i get is the commands below and nothing else.
login as: admin
admin@10.10.1.126's password:
Last login: Wed May 30 11:11:42 2012 from jsmith
Could not chdir to home directory /home/admin: No such file or directory
acs>
API called before initialised at V:ismg_israel_acsAcsEndPointCoreendpoint.cpp:395
Command Description
----------------------------------------------------
? List commands
exit Log off
help List commands
csutil -dumpadmin Dump Admin Audit Information
csutil -dumpgroups Dump Group Audit Information
csutil -dumpusers Dump User Audit Information
csdbsync -syncnow RDBMS synchronization
I have to migrate two appliances ACS SE 1112 under 4.0.1 to new two appliances ACS SE 1121 under 5.2 version.I would like to clarify the procedure to do it by minimizing down time impact.I saw there are Migration Utility and Import Tool but do I need an Intermediate Windows Server to do this migration ?
View 1 Replies View RelatedWhere I can find ACS 5.X recovery DVD. I have vm ware and want to make .iso to recover lost system password.I am not able to find in any Cisco downloads.
View 2 Replies View RelatedIt's impossible to use acs 5.2 recovery DVD to cisco 1121 acs 5.1?
View 7 Replies View Relatedhow to recover ACS 5.0.021 CLI password.I dont have 5.0.021 cd with me can i use 5.2 cd to recover the same ?
View 1 Replies View Relatedwhere I can find a CLI password recovery procedure for the administrator account?
View 2 Replies View RelatedWhat is the procedure for web admin password recovery for nac server applicance 3355?
View 14 Replies View Relatedi need to recover a router Cisco 2801. I lost the password and the "no service password-recovery" is configured. I have done many attempts with the procedure in this link :URL
View 9 Replies View RelatedI have a problem exporting the config from a 1112 appliance.It does not boot up properly. GUI logon and authentication is not possible.I can console and SSH to it but the only thing i get is the commands below and nothing else.Could not chdir to home directory /home/admin: No such file or directory
View 2 Replies View RelatedI can't come into recovery mode DIR-835 for restoration of a native insertion.
View 4 Replies View Relatedwhere I can find a CLI password recovery procedure for the administrator account?
View 1 Replies View RelatedI have problem recovering my cisco 501 pix password. I followed instructions on this pageurl... but it seems its not working. I cant ping my TFTP Server on my pc. I tryed to disable firewall on my pc, i did a fresh install Windows but still i cant ping my TFTP Server on my PC.
View 8 Replies View RelatedAs I make a password recovery to a Cisco PIX 525 Version 6.3(3)?
View 1 Replies View RelatedI just bought one of these in and it was in production and I have no way of getting a hold of the login information. Is there a way to wipe these to factory defaults? I have been looking everywhere with no such luck.
View 2 Replies View RelatedI am a student pursuing a CCNA certification currently. I recently came across a lot of 3548 xl switches. They power up fine, post with out problem and load flash. The problem I am running into is that the console is password protected. I have found the password recovery procedure for this switch, but it requires the use of the mode button. I have tried this process several times and the flash file is loaded with the startup config file. How do I perform a password recovery on a switch with a broken mode button?
View 1 Replies View RelatedI just bought an N66U and started the process of flashing dd-wrt onto it via Asus' web GUI. I followed the steps on their wiki and it said 'complete!' I went to do another hard reset, as per the instructions, and no dice. I fear I may have bricked it
The next apparent step to me was to get it into recovery mode and either restore the asus fw or continue down that path with the ddwrt stuff, but I can't get it into restore mode
The documentation says the power LED is supposed to blink 'slowly' after holding the reset button + insert power adapter. I can't get to this stage.
Also, whenever I plug it in, the LED's on ports 2, 1, and WAN are solid for a few seconds. I don't know if it did this before, but I thought it could be an error code of some sort.
To configure my Cisco, I use the console cable but as I have no serial port on my PC, I use a USB to serial cable which I plug the console. I had lost this USB cable -> serial but I found another one. So I started to configure my Cisco by copying from an existing config. I found out that a prior the converter is defective and copy the wrong config.
I had copied the enable secret password and it badly copied! No luck, I made a copy run start. Therefore more accessible to Cisco! When I start the Cisco, I see what activated "the Mechanism password-recovery is enabled". so I followed the procedure Cisco
I go flash_init: OK but when I type "load_helper" Unknown command it say to me .... I'm stuck!
The model is my Cisco: Cisco WS-C2960G-24TS-S
SW Version 12.2(55)SE3
Sw image C2960S-UNIVERSALK9-M
I have a couple of 877s which have "no service password recovery" set and something has happened to the flash or the IOS has been lost for one reason or another.
When trying to boot the routers, they all display similar to this, which then repeats:
[code]....
Or words to the effect of there being no IOS at all, unable to boot, but the result is the same, it just loops and there's nothing I can do to break the sequence!
I've tried taking the flash from a working 877 and replacing the card but this doesn't work and unfortunately, putting the once working strataflash card back in the working 877, it gets the same problem!
MSE can not boot.MSE show error log. [code] How to recovery MSE 3310,I find in documents not show method recovery. Any solution recovery MSE 3310
View 2 Replies View RelatedI have a cisco 515e pix but where I bought it from did not get the machine back to default. I boot it up and get to the user prompt, type enable and it asks for a username and then a password. I am new to this and am have no problems with router and switch password recoverys but when I look at the cisco documentation it is a bit overwhelming and I am not quite sure what it is that they want me to do to fix this. I have downloaded all the password recovery software loads and have the one I need for 6.x which is what the box is running I am just not sure what it is that I need to do. Can I use that recovery software from directly from my pc using a tftp server?
View 1 Replies View RelatedI recently cleared out a router. I did that by typing confreg 0x2142 in rommon mode. Once I was in enable mode
[code]...
I did RECOVERY on my computer. Its a Compac Windows XP Home edition. This computer runs off of my main computer by a router & adapter. My router & adaptor are showing green but the Internet is showing red. Its becuz my high speed Internat service is ATT.my.yahoo.com. which comes through IE. On my newer computer all is fine. My IE works good & all is working. but my IE on my older one which runs with the router wont set up.
View 1 Replies View Relatedwould like to know is dre a way to retrieve a message deleted from my gmail and yahoo account a month back and now i want to recover it. And if yes then how and if no then aftr seleting any mail from trash till wat time period can we reover the mail if possible?
View 1 Replies View RelatedI did a System Recovery after my computer had the virus that redirected me to a pop ups and different websites every time. After System Recovery I no longer have internet connection on the computer I used. All the other devices and computer can access my router but not the computer that I've used System Recovery on. I looked at Device Manager and all of my Networking Devices are working properly. I even looked at Wireless Zero Configuration and the Startup type is Automatic and the Service Status is Started.I go into Network Connections and my USB Adapter has an red X on it. I right clicked properties and looked at wireless networks and the preferred networks is grayed out[CODE]
View 3 Replies View Relatedhow I may be able to delete files beyond recovery from a remote computer.
View 7 Replies View RelatedI need to recover switch enable password, i have already configured AAA also, when i am tryig to follow below proceedure finally saying Authorization failed. how can i recover enable password,If I try to recover password like this description says [URL]
Step 1 Connect a terminal or PC with terminal-emulation software to the switch console port.
Step 2 Set the line speed on the emulation software to 9600 baud.
Step 3 Power off the switch. Reconnect the power cord to the switch and, within 15 seconds, press the Mode button while the System LED is still flashing green.
Base ethernet MAC Address: 00:0x:xx:xx:xx:xx
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the flash filesystem. The following commands will initialize the flash filesystem, and finish loading the operating system software:
flash_init
load_helper
boot
[code]....
I was just configured a 3800 router with this command. I cannot get to the ROMMON mode anymore. Cisco says you should press Break key within 5 seconds after the image decompresses during the boot. But mine is ignoring it and going to load running config directly.
View 7 Replies View RelatedI have a 4404 running firmware 7.0 and something happened (don't think it was a hack), but all of a sudden I can't login to the box via web or ssh or even telnet.
In trying the recovery procedure, I get a lot of messages scrolling through and cannot do the Restore-Password command on the CLI.
I'm attaching the whole capture, but here's a truncated capture from the procedure:
*fp_main_task: Nov 21 10:39:46.501: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*fp_main_task: Nov 21 10:39:46.501: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
[Code].....
So as you can see, my prompt to enter the command is taken up by this fp_main message and it uses up the first and only time I can enter this in. I'm trying everything I can to not have to go back to factory defaults.
How is-it possible to do a recovery password for sysadmin on ADE-OS ?We're using LMS 4.2.1 and my customer doesn't remember the username and password created during installation.We have the admin user for the https connection.
View 4 Replies View RelatedI wanted to do with my Cisco 2800, a password recovery. I have read the instructions and Cisco just came up at six.
Complete these steps in order to recover your password:
Shut down the router. Remove the compact flash that is at the back of the router. Power on the router. Once the Rommon1> prompt appears, enter this command:
confreg 0x2142Insert the compact flash. Type reset.
BUT I had forgotten to plug the flash card. And now comes via console hieroglyphics only
I have 3 x ASA 5510 & 2 x ASA 5520, that require resetting back to factory default, the customer has removed the External Flash Cards, and i've checked internally on each unit the Internal Flash car is still present, is it possible to run a password recovery then a factory reset? and how would i go about resetting each unit to the new configuration.
View 8 Replies View RelatedWhere is the link to download recovery IOS for AP1130AG.
View 4 Replies View Related