Cisco VPN :: Pix 515E Password Recovery

Jun 26, 2011

I have a cisco 515e pix but where I bought it from did not get the machine back to default. I boot it up and get to the user prompt, type enable and it asks for a username and then a password. I am new to this and am have no problems with router and switch password recoverys but when I look at the cisco documentation it is a bit overwhelming and I am not quite sure what it is that they want me to do to fix this. I have downloaded all the password recovery software loads and have the one I need for 6.x which is what the box is running I am just not sure what it is that I need to do. Can I use that recovery software from directly from my pc using a tftp server?

View 1 Replies


ADVERTISEMENT

Password Recovery Or Factory Reset On Cisco PIX-515e

Jul 4, 2011

I have a cisco PIX-515e which i have connected to a emulator through the console port, and im having trouble erasing data from it. I can get into 'pixfirewall' mode and 'monitor' mode but thats as far as i get. i have tried 'write erase' and 'configure factory-default' in both modes to no success.

View 11 Replies View Related

Cisco Firewall :: Password Recovery Procedure For PIX 515e

Apr 27, 2011

My bussines have an old PIX 515e and im about to install it in a "testing" eviorment but no one can remeber the password for this old equipment. Is there a way to reset the password?
 
But when it reboots and I write "enable" in the console it asks for a password, and the password isn't "cisco" as factory default. I really need this firewall up and runing ASAP.
 
How to reset the "enable"-password?

View 3 Replies View Related

Cisco WAN :: Recovery Password 2801 With No Service Of Recovery

May 1, 2012

i need to recover a router Cisco 2801. I lost the password and the "no service password-recovery" is configured. I have done many attempts with the procedure in this link  :URL

View 9 Replies View Related

Cisco :: ACS 5.1 Password Recovery Procedure

Oct 20, 2011

where I can find a CLI password recovery procedure for the administrator account?

View 1 Replies View Related

Cisco Firewall :: PIX 501 Password Recovery

Nov 18, 2011

I have problem recovering my cisco 501 pix password. I followed instructions on this pageurl... but it seems its not working. I cant ping my TFTP Server on my pc. I tryed to disable firewall on my pc, i did a fresh install Windows but still i cant ping my TFTP Server on my PC.

View 8 Replies View Related

Cisco Firewall :: PIX 525 Password Recovery?

Dec 13, 2011

As I make a password recovery to a Cisco PIX 525 Version 6.3(3)?

View 1 Replies View Related

Cisco :: AIR-LOC2710-L-K9 Password Recovery?

Jun 1, 2011

I just bought one of these in and it was in production and I have no way of getting a hold of the login information. Is there a way to wipe these to factory defaults? I have been looking everywhere with no such luck.

View 2 Replies View Related

Cisco WAN :: Password Recovery For 3548 Xl?

May 6, 2011

I am a student pursuing a CCNA certification currently.  I recently came across a lot of 3548 xl switches.  They power up fine, post with out problem and load flash.  The problem I am running into is that the console is password protected.  I have found the password recovery procedure for this switch, but it requires the use of the mode button.  I have tried this process several times and the flash file is loaded with the startup config file.  How do I perform a password recovery on a switch with a broken mode button? 

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.0.021 CLI Password Recovery

Apr 10, 2012

how to recover ACS 5.0.021 CLI password.I dont have 5.0.021 cd with me can i use 5.2 cd to recover the same ?

View 1 Replies View Related

Cisco WAN :: 2960 - Password Recovery

Mar 12, 2012

To configure my Cisco, I use the console cable but as I have no serial port on my PC, I use a USB to serial cable which I plug the console. I had lost this USB cable -> serial but I found another one. So I started to configure my Cisco by copying from an existing config. I found out that a prior the converter is defective and copy the wrong config.
 
I had copied the enable secret password and it badly copied! No luck, I made a copy run start. Therefore more accessible to Cisco! When I start the Cisco, I see what activated "the Mechanism password-recovery is enabled". so I followed the procedure Cisco
 
I go flash_init: OK but when I type "load_helper" Unknown command it say to  me .... I'm stuck!
 
The model is my Cisco: Cisco WS-C2960G-24TS-S
 SW Version 12.2(55)SE3
Sw image C2960S-UNIVERSALK9-M

View 3 Replies View Related

Cisco WAN :: 877 - No Password Recovery / IOS Lost

Oct 2, 2011

I have a couple of 877s which have "no service password recovery" set and something has happened to the flash or the IOS has been lost for one reason or another.
 
When trying to boot the routers, they all display similar to this, which then repeats:
 
[code]....
 
Or words to the effect of there being no IOS at all, unable to boot, but the result is the same, it just loops and there's nothing I can do to break the sequence!
 
I've tried taking the flash from a working 877 and replacing the card but this doesn't work and unfortunately, putting the once working strataflash card back in the working 877, it gets the same problem!

View 11 Replies View Related

Cisco :: Enable Password Recovery In 2950 With AAA?

Aug 3, 2012

I need to recover switch enable password, i have already configured AAA also, when i am tryig to follow below proceedure finally saying Authorization failed. how can i recover enable password,If I try to recover password like this description says [URL]

Step 1 Connect a terminal or PC with terminal-emulation software to the switch console port.
 
Step 2 Set the line speed on the emulation software to 9600 baud.
 
Step  3 Power off the switch. Reconnect the power cord to the switch and,  within 15 seconds, press the Mode button while the System LED is still  flashing green.
 
Base ethernet MAC Address: 00:0x:xx:xx:xx:xx
Xmodem file system is available.
The password-recovery mechanism is enabled.
 
The system has been interrupted prior to initializing the flash filesystem. The following commands will initialize the flash filesystem, and finish loading the operating system software:
 
flash_init
load_helper
boot

[code]....

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Password Recovery Procedure?

Oct 17, 2011

where I can find a CLI password recovery procedure for the administrator account?

View 2 Replies View Related

Cisco WAN :: 3800 No Service Password Recovery

Sep 26, 2011

I was just configured a 3800 router with this command. I cannot get to the ROMMON mode anymore. Cisco says you should press Break key within 5 seconds after the image decompresses during the boot. But mine is ignoring it and going to load running config directly.

View 7 Replies View Related

Cisco :: 4404 - Password Recovery On WLC Not Working

Nov 27, 2011

I have a 4404 running firmware 7.0 and something happened (don't think it was a hack), but all of a sudden I can't login to the box via web or ssh or even telnet.
 
In trying the recovery procedure, I get a lot of messages scrolling through and cannot do the Restore-Password command on the CLI.
 
I'm attaching the whole capture, but here's a truncated capture from the procedure:
 
*fp_main_task: Nov 21 10:39:46.501: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*fp_main_task: Nov 21 10:39:46.501: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<

[Code].....
 
So as you can see, my prompt to enter the command is taken up by this fp_main message and it uses up the first and only time I can enter this in. I'm trying everything I can to not have to go back to factory defaults.

View 24 Replies View Related

Cisco :: LMS 4.2.1 Password Recovery System Administrator ADE-OS?

Aug 23, 2012

How is-it possible to do a recovery password for sysadmin on ADE-OS ?We're using LMS 4.2.1 and my customer doesn't remember the username and password created during installation.We have the admin user for the https connection.

View 4 Replies View Related

Cisco WAN :: 2800 Password Recovery Failed?

Sep 19, 2012

I wanted to do with my Cisco 2800, a password recovery. I have read the instructions and Cisco just came up at six.
 
Complete these steps in order to recover your password:
 
Shut down the router. Remove the compact flash that is at the back of the router. Power on the router. Once the Rommon1> prompt appears, enter this command:
 
confreg 0x2142Insert the compact flash. Type reset.
 
BUT I had forgotten to plug the flash card. And now comes via console hieroglyphics only

View 1 Replies View Related

Cisco Firewall :: ASA 5510 Password Recovery?

Jan 7, 2013

I have 3 x ASA 5510 & 2 x ASA  5520, that require resetting back to factory default, the customer has removed the External Flash Cards, and i've checked internally on each unit the Internal Flash car is still present, is it possible to run a password recovery then a factory reset? and how would i go about resetting each unit to the new configuration.

View 8 Replies View Related

Cisco WAN :: 851 - Password Recovery Functionality Is Disabled?

May 31, 2010

the " password recovery functionality is disabled " service is running on the system .
 
im trying to access rommon in a Cisco 851, with not much success, i am sending a break after the image is loaded ( in the time frame that is allowed for that) .

View 13 Replies View Related

Cisco WAN :: C2600 Config Registry / Password Recovery?

Mar 24, 2012

I am studying for the CCNA and have my own lab. Several months ago I setup the lab and hand things running well, and decided to put it all away for a while. Alas, now that I have brought it all out again, I don't remember the passwords I used and have since destroyed my documentation, so this is perfect practice at password recovery/config maintenance type of stuff.
 
I am working on a 2610XM. When I power on the router, I see all the information pasted below. I have tried the password recovery processes described in the cisco knowledge base where we use the rommon prompt to load 0x2142, reset, then enable secret <password> and followed the remainder of the instructions, but when I reload the router after the process, the new password I've set still does not work.
 
Some things that are not consistent from the documentation that I am seeing are the messages Slot is empty and WIC is empty.
 
I am wondering if my router does not use 0x2102 for it's load, but it will not show what it is using and I can't run show version because of the password. I am connecting through the console port and using putty to access and configure. Below is a paste of the startup messages after the router decompresses it's image.

Processor board ID JAD070709N9 (1997350087)
M860 processor: part number 5, mask 2
Bridging software.

[Code].....

View 6 Replies View Related

Cisco Wireless :: Password Recovery LAN Controller 4402?

Jul 20, 2008

how to password recovery Wireless LAN Controller 4402

View 3 Replies View Related

Cisco Switching/Routing :: Password Recovery On NME-16ES

Sep 17, 2012

I am trying to use the password recovery for an NME-16 and am having trouble.  I am unable to look at my files in dir to so I can rename them.  I can get the switch to bypass the config and come with the switch: prompt, but can not do anything more.  I am trying the password recovery guide, but cant get to the text file to rename.  I am using a 2811 router.

View 2 Replies View Related

Cisco WAN :: 851 No Service Password-recovery Option Enabled

Jan 1, 2010

I purchased a Cisco 851 router from ebay a few weeks ago that has the "no service password-recovery" option enabled. I've tried every "break" option i could find, and this thing does not seem to let me get in. I asked the seller for the password, and they refused (though i cant even get to a prompt to enter a password) or ROMMON. The unit comes up and reports its trying to connect to "Translating "stipp.srv.hcvlny.cv.net"...domain server" once it comes up, and thats it. [code]

View 34 Replies View Related

Cisco WAN :: 2821 Password Recovery Is Disabled On Router

Aug 22, 2011

Recently I have bought a 2821 router from an auction. The router did have some configuration and password on it. I tried to break into it by restating it and pressing control and pause break signal. Old cisco method. Now when I try this method on my 2821. It does say that password recovery is disabled on the router. After this message router proceed with normal boot process. How to break the password ? Even if I loose the configuration.

View 4 Replies View Related

Cisco WAN :: Password Recovery On A Catalyst 3850 Switch

May 23, 2013

I'm trying to do password recovery on a Catalyst 3850 switch..I've read the section in this: url...where it says that I need to have physical access to the switch (I do), and that I reset the password if I issue a break command and interrupt the boot procedure. I've tried to do that... it gives me the "switch:" prompt, so I think I've interrupted the boot procedure successfully, but, what do I do next?I've successfully done recoveries on Catalyst 2950s, 3550s & 3560s, but the procedure for this one, if I'm reading the link above right, sounds like it's completely different.

View 10 Replies View Related

Cisco WAN :: 3750 Power Outage During Password Recovery?

Nov 22, 2012

During a password recovery on a cisco 3750 switch there was a power outage and now I can’t console into the switch.

View 1 Replies View Related

Cisco WAN :: How To Make Password Recovery For 2900 Series

Feb 10, 2010

I need to do password recovery for a 2911 router. But ı can't find any documentation about it. I can be able to login at the first login, unfortunately ı logged out without changing the password. Now I can not log in and I can not open rommon with the ctrl+break key sequence.

View 6 Replies View Related

Cisco Switches :: SGE2000P Stack Password Recovery?

Mar 22, 2013

Im trying to recover the password from my stacked switchs(doing procedure on master switch),im following a guide i have read in this forum("SRW248G4 V1.1 unable to reset password"), at console terminal have chosen "password Recovery" it prompts the "current password will be ignored" and then i hit "Escape" the switch start loading de configuration, at this point i attempt to login from telnet or http but the login fails.
Here is the password/username combo im using (admin/blank ; admin/admin). Is it possible to restore admin password or should i just hardware reset the switchs?

View 3 Replies View Related

Cisco Switching/Routing :: 3750 Password Recovery

Sep 24, 2012

I want to recover the password or set the cisco 3750 to the default password, as forget it

View 4 Replies View Related

Cisco Firewall :: How To Reset PIX 515E Password

Mar 29, 2011

I have Cisco PIX 515E for my Lab and can't recover the password. It is not connected to the network. I have configured server, address, gateway from the monitor mode and tftp not seeing my laptop. best way to reset or recover password.

View 7 Replies View Related

Cisco :: No Service Password Recovery Command On 2801 Router?

Nov 17, 2011

We have a cisco 2801 router in class which has a disabled password recovery. We tried almost everything, we cannot get into ROMmon and the break sequence doesn't work in any program (hyper terminal, putty, teraterm pro).

Here is the log from hyperterminal:
 
System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)Technical Support: [URL].Copyright (c) 2004 by cisco Systems, Inc.PLD version 0x10GIO ASIC version 0x127c2801 processor with 131072 Kbytes of main memoryMain memory is configured to 64 bit mode with parity disabledReadonly ROMMON initializedPASSWORD RECOVERY FUNCTIONALITY IS DISABLEDprogram load complete, entry point: 0x8000f000, size: 0xc100Initializing ATA monitor library.......program load complete, entry point: 0x8000f000, size: 0xc100Initializing ATA monitor library.......program load complete, entry point: 0x8000f000, size: 0xd49718Self decompressing the image :

[code].....

View 5 Replies View Related

Cisco Switching/Routing :: Password Recovery On 1900 Series ISR?

Jan 1, 2012

I can see the console on the router. (Using the USB console connected to a Macintosh.) I was configuring the router though this console connection, and I created a new user (priv level 15) and removed the default 'cisco' user. So I'm stuck at the username/password login prompt now.
 
I decided to do the password recovery procedure (via the cisco doc I found etc), but I cannot break into ROMMON during the boot process. I'm not sure if that's because my Mac isn't sending the break, or what.
 
The pw recovery doc says you can "remove flash" if you can't break into the boot sequence. However, I cannot find any instructions on how to remove the flash. I've opened the router, and I see one very small daughter card on the main board that I think is the flash, but I'm not about to start arbitrarly prying parts off.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved