Cisco Security :: Red Hat OS Version In ACS 1121?
Jul 1, 2012How to know the Red Hat OS version in the ACS 1121 appliance?
View 1 Replies
ADVERTISEMENT
Cisco AAA/Identity/Nac :: Account Lockout For Failed Attempts In ACS 1121 Version 5.1.0.44.6
Jun 4, 2011I have ACS1121 running version 5.1.0.44.6 on my network environement , I need to enable account lock-out for internal user during failed attempt for more than 8 times , How to achieve this . I could see account lock-out for administrator user account , not for internal user .
View 2 Replies View RelatedCisco Security :: Upgrading CSACS 1121 From 5.1 To 5.2?
Nov 28, 2010I have a problem upgrading an appliance CSACS 1121 from version 5.1 to 5.2 because restore DVD has image of 5.1 not 5.2 and in cisco.com appears only two files 5.2-0-26-1.tar.gpg and ACS_v5.2.0.26.iso, the first image is a patch and the second I'm not sure if is image for version 5.2, in case if appropriate which would be the correct commands to perform the upgrade using CLI.
View 4 Replies View RelatedCisco Security :: Migrating From ACS 1113 Appliance To ACS 1121
Mar 18, 2013We are currently running a ACS 1113 with version 4.2 software. We are going to replace the 1113 ACS with two 1121 ACS.
View 1 Replies View RelatedCisco Security :: ACS 4.1 Version Recovery Disc On 4.2 Version To Recover Forgotten Password
Jan 16, 2012Can we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies View RelatedCisco Security :: Which IOS Version Of 3560-X Switch Support NAC-L2-IP
Apr 20, 2011Which IOS version of 3560-X switch support NAC-L2-IP ?
View 1 Replies View RelatedCisco Security :: Tunnel Mismatch Between A PIX 515E Version 7.2(2) - 3800 12.3(11r)?
Mar 11, 2007I have a tunnel between a PIX 515E version 7.2(2)and a Cisco 3800 version 12.3(11r). There is a mismatch somewere in the configs but I cannot find it. I have included the configs and the syslog errors.
View 5 Replies View RelatedCisco Firewall :: ASA Version 8.3 And Higher / Nat Control From Lower Security?
Oct 1, 2012I have read that nat control is no longer exist in this version,However, I am trying to permit traffic from lower security interface to higher interface security,Is it need to be Natted ?
When I try to route, i have never succeeded, but when I put a nat, I can access and the traffic go through Do I miss anything on the nat control statement ?
Cisco Security :: Disabling XAuth For Remote VPN Users On ASA 5510 Version 7.2(1)?
Jul 1, 2006how to disable XAuth for Remote VPN users on the ASA 5510 running 7.2(1)?
HPMFIRE(config)# tunnel-group vpn3000 general-attributes
HPMFIRE(config-tunnel-general)# authen
HPMFIRE(config-tunnel-general)# authentication-server-group none
ERROR: The authentication-server-group none command has been deprecated.
The isakmp command in the ipsec-attributes should be used instead.
--[code]....
I couldn't find anything under isakmp to disable it.
Cisco AAA/Identity/Nac :: ACS1113 Version 4.2 Ssh Version 1 / Specify Only Version 2 Or Turn Off SSH?
Sep 14, 2009McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies View RelatedCisco Security :: ASA 5510 - ASDM Fails To Load On Mac OSX 10.7 Running Java Version 1.6.0_33
Jun 24, 2012I have an ASA 5510 running ASDM 6.4(9) and Cisco Adaptive Security Appliance Software Version 8.4(4)1.I am trying to configure for the first time and I am accessing the ASA via its Management Interface.I am successfully able to connect to the device and get to the Cisco ASDM 6.4(9) page.When I try to run the startup wizard, a couple of prompts displays up to the point where the java applet runs and aks me to enter my IP, username and password.As it is a new system, password and username is blank so I enter and I get a message saying "loading software from cache" which later changes to "software Update completed" and then nothing happens.I am running MacOSX 10.7 Lion, Java version 1.6.0_33.I did try and run this on a Windows system and i was able to load the interface.
View 2 Replies View RelatedCisco Security :: Can Integrate Acs Version 5.x With Active Directory Microsoft Windows Server 2012
Apr 5, 2013Can we integrate cisco acs verison 5.x with active directory Microsoft windows server 2012 ?
View 1 Replies View RelatedCisco Wireless :: Which Version Of Prime Infrastructure Supports WLC5508 Version 7.4
Mar 11, 2013which version of prime infrastructure supports wlc5508 version 7.4
View 2 Replies View RelatedCisco Firewall :: Software Upgrade For ASA 5520 Version 7.0(1) To Version 8.4?
Apr 3, 2012provide me with the important links which can show me how to do the software upgrade for my ASA 5520 ver 7.0(1) to ver 8.4 ? as well as the ASDM
View 10 Replies View RelatedCisco AAA/Identity/Nac :: Use Acs 5.2 Recovery DVD To 1121 Acs 5.1?
May 31, 2013It's impossible to use acs 5.2 recovery DVD to cisco 1121 acs 5.1?
View 7 Replies View RelatedCisco Wireless :: Migrate AP 1121 By WCS?
May 1, 2012I wonder if you can migrate the cisco ap 1121 by WCS, could not find any specific documentation.
View 3 Replies View RelatedAAA/Identity/Nac :: Cisco ACS 1121 Integration With AD?
May 15, 2011integrated the Cisco ACS 1121 with 5.1 and AD and been able to use multiple policies to permit or deny access to different NDG? I am able to authenticate agains AD but I am having an issue with getting the policies to use the user memberOf attribute to set access levels.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 1121 With V5.0 PAK Lost
Jan 6, 2012It has been more than a year since a customer bought a Cisco ACS 1121. It was unpacked then and the PAK is lost, no where to be found. Is there any way to retrive the lost PAK ?
View 19 Replies View RelatedCisco AAA/Identity/Nac :: Replacement Of ACS 1121
Jun 7, 2013I have a clarification related with ACS 1121. Client needs a solution for ACS feature, instead of investing on ISE Base, is there any model exists as ACS appliance only. I believe ACS 1121 is going to be EOS and it says SNS 3415 is the replacement model .
What I am confused is , It is an ISE as well as ACS and there is separate licensing for ISE (as base and advanced). What should i do , if i need to select SNS 3415 as ACS appliance ? is it built in or should i need to add anything extra ?
Cisco Firewall :: How To Upgrade ASA 5510 Version 8.0(4) To Version 8.3
May 10, 2011i am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB. me to Upgrade it to 8.3
View 6 Replies View RelatedCisco AAA/Identity/Nac :: ACS 1121 Appliance Downgrade To 4.2.0.124
May 2, 2011 Newly shipped cisco ACS appliance 1121 has been shipped with ACS version 5.0 , I need to downgrade to ACS version 4.2,0 , I could not see recovery CD or DVD for acs 4.2 along with shipment , Is ACS 1121 appliance is comptaible to acs 4.2.0 version ? .
My ACS BOM details
CSACS-1121-K9
ACS 1121 Appliance With 5.1 SW And Base license
[code]....
Cisco AAA/Identity/Nac :: How To Configure LAN Teaming In ACS 1121
Mar 27, 2011how to configure LAN teaming in Cisco ACS 1121. My requirement is to have virtual IP in the server with two physical IPs in the available 2 interface in the server.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 1121 With 5.3 MIB For SNMP Monitoring
Mar 26, 2012I am trying to add ACS 1121 (ver 5.3) to monitoring and seems that MIB are missing. Need MIB for this device which I can use in monitoring tool.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Monitoring ACS 1121 Via SNMP?
Aug 13, 2012I have 5 installations of ACS appliances (ACS 1121 running ACS 5.3). Is there a way to monitor them via SNMP? The AD client keeps dying on one of them, and even with the newest patch it's not up. Also, i want to monitor them up/down, CPU, memory... basic network monitoring to make sure my devices are healthy.
Any one know if that can be configured? I figured i'd ask here before opening a TAC.
Cisco Application :: Switch Is Not Able To Authenticate Itself To ACS 1121
Jul 30, 2011The user "shreedhar" is getting authenticated locally and not through TACACS+ (Cisco ACS 1121 appliance running ACS 5.1).
In the switch, after entering credentials, the switch says, "Authentication failed - login using local mode". (Not the exact message but close enough!).
In ACS 5.1 -> Monitoring and Reports->Dashboard->My Favorite Reports->Authentications-TACACS+, I am getting the following error, "13011 Invalid TACACS+ request packet - possibly mismatched Shared Secrets".
Configuration in switch is as follows:
feature tacacs+
username admin password 5 $1$joEvYokP$5wZ1mtpBlxuoKMEWbFzRY1 role network-adminusername shreedhar password 5 $1$x8u5N4IR$NbVcY1u6CuoXYkMgXs60l/ role network-admin
tacacs-server key 7 "Ti!23456"ip tacacs source-interface loopback0acacs-server test username demo password demo123 idle-time 3 tacacs-server timeout 10tacacs-server deadtime 5tacacs-server host 192.168.31.11 key 7
[code]....
Is #the encrypted TACACS+ shared secret key from switch not being decrypted by ACS 5.1 as it requires a clear-text password? Could it be the reason for the above error?
Cisco AAA/Identity/Nac :: CSACS-1121-K9 - Dual NIC
Aug 11, 2011Is it possible to have Dual NIC on ACS v5.2 such as teaming or any else??
I am thinking of connecting the two NIC on the CSACS-1121-K9 appliance to two switches on the same network, but wondering if it will be possible or not.
Cisco AAA/Identity/Nac :: Applying A Patch To ACS 1121
Jun 3, 2012I have an issue with applying a patch to an ACS 1121 appliance running version 5.2.0.26. I have 5 units that needed updating and the first one is the unit with the problem. The subsequent ones updated with no issues.
When I do a show version the 5.2.0.26.10 does not show. When I try to do a reinstall I get back patch all ready exists. When I try to do an uninstall I get back patch does not exist.
Is there a command can wipe out patch 10, so I can start over? The CLI factory-reset only wipes the web configuration not the running-config or IOS.
AAA/Identity/Nac :: 1121 - Add Secondary ACS Server 5.4?
May 29, 2013My customer has an ACS 1121 version 5.4. Now we want to install a secondary ACS 1121.
View 2 Replies View RelatedCisco :: 3501E Not Integrating In WLC4404 With 1121 And 1241 APs
Nov 11, 2012We have a WLC 4404 with about 85 1121 and 1241 APs. - I just added 6 new 3501E with Antennas, and configured the a new SSID, but non of my clients can connect to any of the 3501s. One solution from a tech was to update the NIC drivers. I verified that all test clients are 802.11N and sometimes they find the 3501 but often they switch to another of the older and weaker 1121 or 1241s. On one test I had a 3501 just outside his room and his client nic was picking up a weak signal 2 floors up, then it would go to one 1 floor down. eventually we could get it to feed of the nearest 3501 but it would go back to another 1121 or 1241 soon thereafter,.
View 5 Replies View RelatedCisco AAA/Identity/Nac :: ACS 1121 V 5.3 NTP Offset Increasing With Server In Same LAN
Oct 31, 2012Im installing & configuring a new ACS 1121. Ive updated to version 5.3 with patch:This temporarily solves my Active Directory problem but i still would like to have the NTP server pointing to the same reference as the Active Directory.
View 1 Replies View RelatedCisco Wireless :: Can't Join 1121-AG To Controller 4404 WLC
Jan 4, 2012Iam having trouble to conect my 1121-AG AP`s to my 4404 WLC.
My WLC version is 7.0.116.0.
I can see he AP is getting an IP address from the controller(internal DHCP). But from some reason they can`t connect to the WLC. I have tried many things such as:
1)reset to default settings
2) move the AP to Autonumos mode and back to LWAPP mode -- didnt work.
1 of my AP 1121AG is working properly.
Cisco Wireless :: 1121 Stuck After AP To LWAP Upgrade
May 7, 2012I have a 1121 autonomous AP which I switched to the lightweight mode by copying the LWAPP ios to its flash and issuing the command boot system flash IOS_file_Name. After that I was unable to associate the AP to my wireless controller because it was continiously rebooting. Unfortunately this AP does not have a console port so I can access the debug and see what is happening. And I was not able to switch it back to the autonmous mode becaus the AP won't accept the Autonomous mode IOS anymore.
View 2 Replies View RelatedAAA/Identity/Nac :: Procedure To Migrate From ACS SE 4.0.1 (1112) To ACS SE 5.2 (1121)
Jan 11, 2012I have to migrate two appliances ACS SE 1112 under 4.0.1 to new two appliances ACS SE 1121 under 5.2 version.I would like to clarify the procedure to do it by minimizing down time impact.I saw there are Migration Utility and Import Tool but do I need an Intermediate Windows Server to do this migration ?
View 1 Replies View Related