Cisco Switches :: Set Static Ip Addresses To Each Port On Sf 300-08?
Dec 12, 2011Is there a way to set static ip addresses to each port on at sf 300-08?
View 1 Replies
ADVERTISEMENT
Cisco Switches :: SG500 DHCP Server Does Not Assign Predefined Static IP Addresses
May 17, 2013I upgraded my SG500 switch firmware to 1.3.0.59, since there is a new functionality DHCP server v.4 well I must say I came accross the issue I cannot solve. DHCP server assign dynamic address - no hassles. troubles start with static IP hosts.I defined a couple of hosts with static address within the correct subnet. I tried with hardware address and client identifiers. no luck. my switch does not assign the IP address I assigned to the suitable mac address. to define it I use both CLI & Web.
ip dhcp pool host HP-Elliteaddress 10.10.11.7 255.255.255.0 client-identifier 01:d8:d3:85:cf:09:72client-name HP-Ellitedefault-router 10.10.11.1exit
ip dhcp pool host VAIO-Zaddress 10.10.14.108 255.255.255.0 hardware-address 54:53:ed:1c:a1:46
default-router 10.10.14.1exit
How To Switch Between 5 New Static IP Addresses
Apr 28, 2013how to switch between my 5 new static IP addresses that I purchased (on a monthly basis now) from my ISP. I need them for my business so that I can send out more than the 1,000 emails per day from the one IP address to all of my customers which total a little over 1,500 now. Unfortunately I'm quite computer iliterate when it comes to understanding even the basics of computer terminology, etc. My ISP explained to me that if I purchased the bundle of 5 static IPs, then I could in essence send out 5,000 emails per day, which is plenty.
View 3 Replies View RelatedSetting Up Static IP Addresses
Jul 17, 2012I want to turn off DHCP and setup static IP addresses, but have some questions about applying the information to my specific system.I have a Cisco Wireless Router, 1-wired computer (windows 7) and 2-wireless computers (1-XP and the other is Windows 7). I also have a dual wireless print server, a Roku box, a Wii, a Kindle Fire, and Vonage which is connected between my cable modem and router (this was the preferred installation method by Vonage).I have ran IPCONFIG /All and have all the addresses. My concern is what to use as a static address for my router first off, and then how I go about picking IP addresses for the computers and devices, and how to set then up both at the router and at the computer or device. Also, do I need any IP address ranges for any of this? I'd also like to make sure it would be possible to setup this system with the Vonage adapter connected between the cable modem and router as it's setup now.
View 22 Replies View RelatedCisco Routers :: SRP-527 Is Not Connecting Using 5 Static IP Addresses
Sep 15, 2011I've put in an SRP-527W for a client and got it working fine. However, it's not connecting using the 5 static IP addresses BT gave me. Where do i input the 5 static IP's on the router that it should connect using?
View 1 Replies View RelatedNSA5500 Block Of Static IP Addresses From An ISP
Nov 20, 2012We have both a Comcast and Verizon connection at our school. They are going into a Sonicwall NSA5500. The configuration is such that if the primary - Comcast - fails then the secondary - Verizon - will pickup the internet traffic. The issue we are having is with local Verizon customers. When we got our IP address from verizon it was a /24 subnet with a gateway starting at .1
I thought this was strange as every other time I have gotten a block of static IP addresses from an ISP it has been a /29 or /28 at the most. But the ISP confirmed that this is what we were supposed to get and it should not cause problems.
A local business we deal with happens to be on our subnet with the same next hop Gateway. When I perform a traceroute to them, the traffic goes directly out the Verizon WAN interface to our common gateway, then to the local business. This, all while the Comcast Interface is our dedicated primary for all traffic.
I spoke with Sonicwall and they explained that the firewall is simply taking the most efficient path which makes sense to me in some regard but is still confusing why it would use the interface when policy says it is a failover.
Now, this local business tries to send us email with their on premise Exchange - we also have Exchange. The emails will sit in their queue indefinitely and ultimately fail to reach us. If I disable the Verizon interface the emails come in perfectly fine - even some in their queue will immediately come through once I disable it. I thought this was a DNS issue but it is not or at least our DNS is all configured correctly where we have no other problems with email. Our MX records utilize the static IPs from Comcast - nothing is using our static Verizon addresses.
Cisco Routers :: Static IP Addresses Don't Have Internet Access (RV042)
Feb 12, 2012I've installed RV042 for a client of mine. For next two months everything worked without any problems. The issue I've been experiencing lately is when I assign a static IP address to the PC it won't have internet access. Once I allow it to have a dynamically assigned IP then it works fine. The IP I assign isn't part of the DHCP range.
View 7 Replies View RelatedCisco Switching/Routing :: 861 Need DHCP Server With Static IP Addresses
Feb 2, 2013I used to use a CentOS self-made server for intranet for my little office, but I bouth few days ago a Cisco 861 router to replace the linux box.
1. I have 2 public IP classes from my ISP. 1 class is limitted to 80mbit upload, the other to 30mbit upload. So I need some sort of DNAT to be able to know exactly which intranet computer uses big internet and which one limitted internet.
2. I need DHCP server and with static IP addresses (one computer must always have the same IP address, etc).. i have my needs for this.
3. Also I need external access to some servers inside (web, ftp, etc) [code]
So far so good, all looks simple and I can achieve this in 2 hours on a centos linux box (correct routes, ip forwarding enabled and few iptables rules for NAT/SNAT/DNAT).
But on this brand new Centos router well, i'm not even successful in pinging the outside world, nor the inside world I'm tired of reading the forums, the documentation..i want (at first) a simple scenario: vlan+dhcp, fa4 with 1 public ip address and ACCESS to the real world. I wasn't able to achieve not even that much. [code]
Cisco Routers :: RV120W / Bridge Mode And Multiple Static IP Addresses
Sep 11, 2011I am trying to configure a BT Business ADSL Router (BT2700HGV) to work in bridge mode in front of a Cisco RV120W router and cannot get this to work.I have followed numerous posts I have come across in configuring the BT router for bridged mode and this has been configured as follows:
ATM Encapsulation - Bridge LLC
DSL and ATM - VPI=0, VCI=38 (also tried VCI=35)
ATM PVC Search - Disabled
Connection Type - Direct IP (DHCP or Static)
Disable Routing - Yes
There are also some other options on the same configuration page for 'Broadband IP Network' (which I have left on DHCP) and also a 'Public IP' which has been left blank. After setting the above options this removes the LAN DHCP configuration, the PPPoA logon details and sets the internal IP address of the BT router to 192.168.1.254.
My understanding of 'Bridge' mode is that this router will now act simply as a modem and configuration details such as logon details and WAN IP address information are configured using the Cisco RV120W router?The configuration of the Cisco router is as follows:
Internet Connection Type - PPPoE
Username and Password set
Authentication Type - Auto-Negotiate (options here are PAP, CHAP, MS-CHAP and MS-CHAPv2)
Routing Mode - Router (Other option is 'Gateway (NAT))' - I have tried both options
The WAN interface on the Cisco router is connected to one of the LAN ports on the BT router. The 'Broadband' light is on the BT router but the 'Internet' light isn't. The WAN status on the Cisco router is 'Connecting'. I am sure I am missing something simple.We have been assigned a range of static IP addresses from BT so am trying to get these working too (x.x.x.24/29 - 5 usable statics), another option available (other than PPPoE) for configuring the WAN interface on the Cisco router is a 'Static IP', not sure if this is the correct option but have tried messing with it, I have tried assigning a static IP from the range given to us (.30 - the router address specified by BT) along with the subnet mask, however don't know what to put as the default gateway, would this be the peer address (but assume that would change anyway), in any case, using the 'Static IP' option does not give an option to supply the BT logon details which I assume is required?
In bridged mode, what is the peer address assigned to, the BT router or the Cisco router?Does the BT router need to be configured with a public IP address?
Linksys Wireless Router :: E3000 Guest Access And Static IP Addresses
Feb 9, 2013I have an E3000 that I am just setting up.I have two issues:
1> I am replacing a WRT110. I had the old router set with a static IP address supplied by my ISP. I configured the E3000 with the same address and I cannot access the internet. Are there any tricks to setting this up on an E3000?
2> As configured I there is a guest network setup. BUT when I access the router I don't see the tab to be able to configure it.
Cisco Firewall :: 5505 Static Nat With Port Redirection 8.3 Access List Using Un-Nat Port
Aug 15, 2012I am having difficulty following the logic of the port-translation. Here is the configuration on a 5505 with 8.3,So I would have thought the outside access-list should reference the 'mapped' port but even with 3398 open I cannot remote desktop to the host. If I open 3389 then I can connect successfully.
View 12 Replies View RelatedCisco Switches :: ESW 540-24 Cannot Get IP Addresses
Nov 15, 2011We sold an ESW 540 switch to a 3COM customer that is replacing old equipment. This replacement will be on different faces so we have to interconnect some 3COM switches to the Cisco equipment. We are installing rigth now and this two situations:
Virtual machines can´t get IP addresses via DHCP (using a different MAC address) when connected to the Cisco switch. Physical machines receive IP addresses from DHCP without problem. This situation never happened with 3COM switches.When we interconect the Cisco Switch to the 3COM switches (not using uplink ports) the connection never goes up. Remembering that 3COM switches are old we fixed the speed to 100 Mbps Full Duplex but it didn't work.
Cisco :: Many MAC Addresses On Same Port?
May 25, 2012We got a bunch of port-sec violations on port fa1/0/42. after checking logs, we noticed that the MAC address responsible for generating the alert was not one, but many.We asked the user, he said he only restarted his computer.The MAC addresses happen to be existing MAC on the network.How is it possible that a port-sec violation is made by many MAC addresses on the same port, successively?
Syslog message generated from device SW_Etage1: May 25 15:17:08 10.100.254.11 1454802: May 25 15:19:11.693 CET: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 6416.8dbb.930e on port FastEthernet1/0/42.
Syslog message generated from device SW_Etage1: May 25 15:17:29 10.100.254.11 1454805: May 25 15:19:32.874 CET: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 78e3.b58f.1011 on port FastEthernet1/0/42.
[code]....
Cisco Switches :: ESW 520 Give Priority To IP Addresses?
May 5, 2011I've got a LAN with private IPs for the computers, and public, static IPs for the VoIP phones. They are a Hosted VoIP provider, and I want to give priority to the public IPs with my ESW-520-48P switch. How do I implement that in this switch?
I have no roles assigned on the ports and no VLANs setup either. I had tried segregating the VLANs first, but eliminated that route. It's all VLAN 1 now in the switch again. For some reason when I implemented VLAN 100 for voice, voice stopped working on the phones, but data was still fine.
Routers / Switches :: Two IP Addresses In Same Network?
Sep 18, 2011I have 192.168.2.1 and 10.10.0.1But i cant connect to 10.10.0.1 network from 192.168.2.1 network. What should I do to connect that both are same network I have a Linksys Router.
View 2 Replies View RelatedCisco WAN :: 5505 Route Public Ip Addresses To DMZ Port
Sep 25, 2011I have a customer thats got a Linksys router now, that has a DMZ port.The DMZ port is configurede to it routes the extra public ip-adress to the DMZ port it has.At the DMZ port they have another router connected, where they routes the public ip-adresses på some other devices.How can i make this setup on a Cisco ASA 5505 (With the Security Plus licens)What i have to do is to replace the Linksys router, and make it so, so it works like it was before with the Linksys.
View 5 Replies View RelatedCisco WAN :: 2821 How To Assign For A Port One / More Public Addresses
Nov 2, 2011I just thought if it's possible to make sure that only approved IP addresses for each of divisions of a company can be used.How can I assign for a port one/more public addresses and be sure that only this port is using it/them. Thing is I have only one 24 bit public Network ID provided to me by ISP. One IP address of the range is used for ISP's gateway. So I have 253 addresses to be distributed among divisions. However to avoid IP address conflicts I have to be sure that only dedicated for a division IP address/es is/are used by the division.
Router is 2821.
Switch is 2950.
Routers / Switches :: Possible To Connect Two Computers With 2 Different IP Addresses From Same ISP
Aug 3, 2011I am having 2 Pc's and 1 ISP. I am havng a DSl modem cum router. Is it possible to connect two computers with 2 different ip addresses from same ISP? My ip address is a static one btw..
View 3 Replies View RelatedCisco Switches :: SG-300-52 How To Find IP Addresses Of Devices Attached To Ports
Nov 20, 2012I have recently purchased an SG-300-52 Managed Switch. (This is the first managed switch I have used, so I am trying to figure out what I can do with it and how it works.)
I would like to know how to find out the IP address of each computer connected to each port of the switch. Is this possible and if so how can I do this from the browser interface?
Cisco Routers :: Route 2 Incoming IP-Addresses To WAN Port Of RV110W
Oct 12, 2011Just purchased a Cisco RV110W for our small business. We were told this was easy for us to use and secure enough for our small office and for our travelling sales staff to access our website.
We purchased 2 dedicated IP-addresses, 216.82.5.230 for access to one server, and 216.82.5.231 for access to a second server (these IP-Addresses given are just an example; not real).
These come into the single RV110W WAN port. The two servers are plugged into 2 of the 4 LAN ports.
But the WAN setup page only accepts one WAN IP-Address. So when we put in 216.82.5.230, the outside world can HTTPS into one server, but we don't know how to get them to HTTPS to the second server when the other staff uses 216.82.5.231.
In summary, how to use the RV110W admin panel to forward the HTTPS/SSL traffic from 216.82.5.230 to one server (setup internally on 192.168.10.20), and the HTTPS/SSL traffic from 216.82.5.231 to the other server (setup internally on 192.168.20.20 using the VLAN setup on this router)?
Automatic Network Adapter Switching By Port Or Addresses?
Nov 9, 2012Is there any solution for automatic switching between wired and wireless network connection?
In my work we have two option for connection to network. Wired for working but with blocked pages like youtube and other streaming media. And wireless for visitors which haven't blocked any pages but I can't do my work on it. Can I by connected to both and some utility will doing switching between them? I want to use streaming and be connected to wired network which has blocked streaming.
Cisco Firewall :: ASA5505 Can't Port Forward Traffic From Two External IP Addresses
Dec 30, 2012I am a total Cisco novice who has just had a ASA5505 installed to replace a linux freeware firewall (smoothwall).I'm told that the 5505 can't port forward traffic (e.g. ssh) from two external IP addresses to two internal destination machines via the same port # (22 in this example).
View 9 Replies View RelatedCisco Firewall :: UDP Port 9500 Open Inbound / Outbound To Specified IP Addresses
Feb 28, 2012I have a weather station at our high school that needs UDP port 9500 open inbound/outbound to specified IP addresses.
Cisco PIX Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(5)57
Cisco Firewall :: ASA5505 Configure Port Forwarding To Multiple Internal IP Addresses
Jun 21, 2012ASA 5505 Firmware 8.3(4), ADSM 6.4(2).I have a public IP address of 168.87.3.4.I need to forward ports (5060, 5080, etc.) to one internal address. (192168.1.1).I need to foward different ports (10020-10080) to a different internal address (192.168.1.2) Everything I read tells me how to do this in a 1 to 1 static NAT.
View 1 Replies View RelatedCisco Firewall :: Possible For 5505 To Route / Map Renaming Private IP Addresses Through Its External Port
Jul 25, 2011I have purchased a subnet of 8 private IP addresses from my ISP. 109.x.x.128/29.The ISP has placed a juniper router within our data centre which is routing purely from 109.x.x.206/30 to 109.x.x.128/29 with the ip of fa0/1 set to .129.
I have linked a cisco 5505 to fa0/1 of the juniper from fa0/0 and configured its IP to .130. I have configured NAT to translate our client pool 192.168.16.x /24 address' to the internet.
Is it possible for the 5505 to route / map my remaing private IP addresses through its external port? I have tried creating a seperate VLAN for a DMZ for our servers to sit within but am returned with a subnetting error as VLAN for my external port is all ready configured within the same subnet.
Cisco Switches :: SG 300-10 - How To Change Static IP
Oct 27, 2011How can I edit a static interface IP address? I don't seem to be able to edit the static IP address for my switch. How do I go about changing it? As you can see the IP Address field is not editable.
I have also upgrade to the latest firmware and I cannot figure out how to edit it via that as well.
Cisco Routers :: RV042 When Updating / Adding Mac Addresses / Table Is Always Sorted By IP Addresses
Oct 8, 2012In setup for old RV042 (V1), when updating / adding Mac addresses, the table is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02 the list is random, thereby increasing the chance of user entering DUPLICATE IP addr with diff Mac addr. That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be able to catch duplicate ip errors even if the system does not flag the errors. All Cisco smart engineers can you all get the dhcp entries SORT by ip addresses.
View 2 Replies View RelatedCisco Switches :: SGE2010 Switches / VLANs And A Blocked Port In Spanning-tree?
Aug 20, 2012I have 2 switch groups.
2 SGE2010's with VLAN's defined as 10,20 and 30
Vlan 10 is the management VLAN, and it uplinks to our border router.Vlan 20 is the workstation VLAN, and all workstations point to the switch as their default GW? Vlan 30 is the ip phone VLAN, and all phones use this as their gateway.
I would like to put a LAG between said switches, we have some servers on the ip phone switch that need to be accessed by the workstation clients, and the single 100mb link through the router is probably not going to be enough.As I understand it, because the switches have different networks on them, a simple lag will not work. I did create a lag, and assign ip addresses to each side, however in that mode, it doesn't appear I can block vlan 10 from transiting the LAG, and with out that block I will end up with a logical loop, and spanning-tree will block one of the uplinks, or the LAG itself.
Static IP For Port Forwarding?
May 25, 2012I need to set a static IP for port forwarding so my clients can connect directly to my server. I kept losing people because my IP address would change every week. I use version MI424WR router and know my Mac address but do not know which IP address I should set it to.
View 6 Replies View RelatedCisco Switches :: Reconfigure Port Mirroring From Port FE17 To FE3 / SF200 Web Interface Crash
Mar 14, 2013i was able to configure (via SF200 web interface) a port mirroring from port FE17 to FE7.i have supressed this port mirroring.when i try to reconfigure a port mirroring from port FE17 to FE3. The SF200 web interface crash. the SF200 seems to reboot.
i have updated the SF200 firmware from V1.1.2.0 to V1.1.2.9.44 when i was able to configure (via SF200 web interface) a port mirroring from port FE17 to FE7.But after having suppressed this port mirroring again, i was not able to reconfigure a new port mirroring from port FE1 to FE3 (the SF200 hangs).
i have also tried to return to default factory setting but this does not solve the issue.i am working on SF200-24P
Cisco Switches :: How To Set Static IP To SML2008 Ports
Mar 7, 2013I have a SML2008 smart switch. I want to set a static IP to each port
View 4 Replies View RelatedCisco LAN :: 3560 Switches - Static IP Routing
Oct 17, 2012I have been looking at deploying a small core switch design for an important branch office that would consist of 2 cores with an etherchannel link and then 4 POE access switches linked to both cores utilising STP. I will also want static IP routing on the cores and will set up HSRP for gateway failover.
The initial switch I looked at for the core was WS-C3560E-24TD-S however after finding that there is no stock around of this at the moment I have seen the WS-C3560X-24T-S which looks like it will do everything I need including IP routing, HSRP and QoS for VOIP. The thing that concerns me is this is about £1000 cheaper so i'm slightly worried im missing someting.
Cisco Switches :: SG200-8 Static Mac Address
Apr 22, 2013My second problem with sg200-08 (firmware: SG200-08x_FW_1.0.6.2.stk) is when I try to add specific MAC address as secure:MAC Address Tables - Static Addresses - Add; insert vlan id, port, mac address and select "Secure":I get error message: "Error: Failed to Add 'Static Address' entry.
View 3 Replies View Related