Cisco Switching/Routing :: 3560E-24TD And IGMP In Layer 2 Environment

I have 3560e which doesn't appear to be passing igmp traffic to the upstream router
 
PC1 ----------- ASA ------------ PC2--------- 3560e ----------- 3825 -------------------- WAN --------------------- Router ------------- Server
 
My ASA runs SMR, has an igmp forward interface outside command on the inside and has a trunk port to the 3560e (V lans 32 & 48).PC2 is a test pc on the 3560e on vlan32. 3825 is my ISPs router on vlan32.
 
- if i try to access the stream from PC2 it works. 
- if i try to access the stream from PC1, i see the igmp join leave my ASA onto the 3560E (i've captured on the 3560e's link to the ASA). 

I've also captured on the ASA and i can see the igmp packet leave the outside interface but the join doesn't reach the 3825 (i've captured on the 3560e port facing the router and there is no join being forwarded).the switch is running in layer 2, 12.2(35r)SE1.
 
switch#sh ip igmp snooping querierVlan      IP Address               IGMP Version   Port---------Switch# 
Global IGMP Snooping configuration:------------------------IGMP snooping                : EnabledIGMPv3 snooping (minimal)    : Enabled Report suppression    : Enabled TCN solicit query    : Disabled TCN flood query count        : 2Robustness variable          : 2Last member query count      : 2Last member query interval   : 1000