Cisco Switching/Routing :: Catalyst 3560x GUI Interface?

Mar 17, 2013

if a connect to the switch via Internet Explorer or every other browser I can't enter configuration because I receive a screen as you can view in image below. And I can view those errors:
 
message: 're_preFlt_txt33' is not defined
Linea: 31
Carattere: 1
Codice: 0
URI:

[URL]
 
If I connect in HTTPS with IE8 in compatibility mode I view the image as in attachment with_https.jpg.

View 1 Replies


ADVERTISEMENT

Cisco Switching/Routing :: Why Last Port Of Two Catalyst 3560X Are Connected Together

May 22, 2012

We have two catalyst 3560X 24T-S switches connected on two separate LANs (both the networks are redundant to each other). The last port of the switches are connected together?

View 15 Replies View Related

Cisco Switching/Routing :: Upgrade Catalyst 2960S And 3560x

Jun 20, 2012

i want upgrade my catalyst 2960S and 3560x at midnight, but i am worried about config loss.  If i upgrade my switch throught web interface, will need I reconfigure the switch?

View 2 Replies View Related

Cisco Switching/Routing :: Catalyst 3560x SFP Fiber To Media Converter

Sep 21, 2012

I'm trying to upgrade some of the netwotk in my workplace.To do this I have istalled a 24port Catalyst 3560X switch.I'm looking to link it to my exsisting network via fibre.
 
I spoke to a local Cisco supplyer who recomended the above switch and an Allied Telesis Media converter.
 
I cannot seem to get the Allied Telesis unit to connect to the cisco switch.I have proved the fibre link by connecting 2 AT Media converters over the fibre.Do I have to enable something on the Catalyst switch or is the AT Media converter not compatible with the Catalyst switch?

View 3 Replies View Related

Cisco Switching/Routing :: IP SLA ICMP Echo Support Catalyst 3560X / 3750X?

Feb 13, 2012

Need to clarify if ip sla icmp echo operation is supported in catalyst 3kx switches (ip services)? on the configuration guide, commands are available, but on the feature navigator, i can't find the feature, only ip sla video operation. i don't have a device to test on here.

View 2 Replies View Related

Cisco Switching/Routing :: Key Functional Differences Between Catalyst Switches 3560E / 3560X And 3560G

Dec 1, 2011

I need to know the key functional differences between the Catalyst switches 3560E, 3560X and 3560G.

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 3560X-24T-S - Setup DHCP Servers On Layer 3 Switch?

Apr 1, 2012

Do you have the ability to setup DHCP servers on this layer 3 switch? I know I can with my old 3550 switch. Want to upgrade and make sure this model supports setting up dhcp servers on it.

View 3 Replies View Related

Cisco Switching/Routing :: 3560x / HSRP On LAN And WAN Interface?

May 9, 2012

I currently use L3 switches as edge routers to my WAN. I want to use a pair of 3560x switches with IPbase to provide a failover path to my WAN using HSRP at one location but had some problems testing the configuration. My plan is use a virtual address on the LAN interface (VLANx which port gi0/1 accesses) and the WAN interface (VLANy which port gi0/24 accesses). I want switch 1 to be primary since it will have an IPS attached to it, and switch 2 will be backup and used only when switch 1 or the IPS requires maintenance. On both the LAN and WAN sides there is no advanced routing going on, the various hosts just depend on the availability of their respective default gateways, so HSRP should be sufficient to provide a failover in either direction.
 
In my testing I got 1 or the other link to fail over but not the entire switch. What should my config look like to achieve failover of the entire switch in the event 1 or the other interface goes down, and fail back when the primary links are again available?

View 7 Replies View Related

Cisco Switching/Routing :: 3560x Configure EIGRP On ASA DMZ Interface

Aug 2, 2012

I am trying to configure EIGRP on my ASA DMZ Interface - topology as follows: [code] The ASA is currently configured for EIGRP with the inside 3560x switch and passing routing updates properly.However, the ASA will not send/receive routing updates to/from the DMZ 3560x switch - the two devices do establish eigrp neighbor relationship. [code]

View 4 Replies View Related

Cisco Switching/Routing :: Cannot Access Property Web Interface On 3560X

Jun 9, 2013

I configured a Switch Cisco 3560X with a basic configuraction, My problem is that when I access Web interface by http://X.X.X.X an login after the image that I attached.I tried restore the default configuration, also tried with different navigator, chrome, Internet explorer, fireffox, safari, change laptop... and update the java client.

View 3 Replies View Related

Cisco Switching/Routing :: Vlan And Physical Interface Counters 3560x

Dec 9, 2012

vlan interface and physical interface (that is serving for this vlan ) have different input/output counters, there is only one physical interface in this vlan .
 
sh int vlan 64
30 second input rate 9000 bits/sec, 9 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec

[Code]....

View 5 Replies View Related

Cisco Switching/Routing :: Catalyst 6509 Interface Alarm?

Jul 10, 2012

I am getting alarms on Solarwind indicating interface down on  "GigabitEthernet 4/7 - Gi4/d1" and "GigabitEthernet 4/8 - Gi4/d2" from our core switch 6509.Remote login to the switch does not show the interfaces when I do the "sh run" command. Now I am at site trying to identify and diagnose this fault.Looking at the numbering on the switch, it indicates to me the card where these alarms come from is from the 'intrusion dectection module'

how I may login and identify this interfaces and rectify these alarms.

View 4 Replies View Related

Cisco Switching/Routing :: Catalyst 2960 - Get Notconnect On Interface

Nov 20, 2012

At one of my sites, I have a 100mbit TLS. For this connection to work properly, the port on my end needs to be setup for 100mbit, full duplex. When I connect the TLS to an interface on my Cisco 2821, configured at 100/full, it works perfectly. Now the confusing part, I'm trying to connect the TLS to a Catalyst 2960. I configure the necessary port for 100/full, and get 'notconnect' on that interface. I set the interface to auto/auto, and it negotiates at 100/half and causes collisions and packet loss.

View 9 Replies View Related

Cisco Switching/Routing :: Catalyst 6503 OSPF On Vlan Interface?

Oct 24, 2011

i'd like to configure OSPF on a Catalyst 6503 IOS 12.2.17.i habe an Gi1/9 with the ip address 192.168.97.30/24 and a VLAN 19 with the IP Address 192.168.19.0/24.I configured OSPF like this
 
router ospf 1
network 192.168.97.0 0.0.0.255 area 10.5.0.0
network 192.168.19.0 0.0.0.255 area 10.5.0.0
 
on the ospf peer is see that the adjaceny is established but i don't get the routes for the 192.168.19.0 network i checked the ip ospf interface vlan 19; i got ospf is not enabled on the interface then i tried to configure

int vlan 19
ip ospf 1 area 10.5.0.0
 
but it does not access ip ospf 1

View 3 Replies View Related

Cisco Switching/Routing :: Catalyst 3750 Switch Interface Output Drops

Mar 13, 2013

One of my Catalyst 3750 switch have many out drops, I execute "sh mls qos int g2/0/3 statist" command, there are many output drops in queue3 threshold3. [code]

View 8 Replies View Related

Cisco Switching/Routing :: Does Supervisor 720 Support All Existing Catalyst 6500 Series Interface

Feb 12, 2013

Q. Does the Supervisor 720 support all existing Cisco Catalyst 6500 series  interface and services module, protecting customer investments?

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 4506 Count Interface Input / Output Rate Always 0

Jan 20, 2013

Our customer get the problem that the switch count the 5mins input/output rate of connected traffic interface always ZERO.The problem only occur in the module 3,4 and 5 interface, module 2 has no problems.
 
-------------------------------------------------------------------------------------------------
Catayst 4506E
12.2(52)SG
 Chassis Type : WS-C4506-E
Power consumed by backplane : 0 Watts
Mod Ports Card Type                              Model              Serial No.---+-----+--------------------------------------+------------------+-----------1     6  Sup 6-E 10GE (X2), 1000BaseX (SFP)     WS-X45-SUP6-E       2    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   3    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E    4    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E    5    48  10/100/1000BaseT (RJ45)                WS-X4648-RJ45-E   

[code]....+

View 2 Replies View Related

Cisco Switching/Routing :: 2921 / Catalyst 3560 - Router Interface Input Queue Drops?

Nov 6, 2011

i have an 2921 connected to an Catalyst 3560. My router interface shows quite a lot of input queue drops. Load is not too much max 5/255.

View 1 Replies View Related

Cisco Switching/Routing :: Access Layer Switching With 2960 / 3560x / 3750x And 4506

Jan 17, 2013

My management has tasked me to give them a high level overview of the different switching we can choose for our new building.
 
This is what I know so far.4 Closets, each closet has 450 ports,One MDF room that is will contain one UCS Chassis and a Nimble iSCSI SAN.
 
I am working on the spreadsheet and it looks like this (Not totally filled):

2960s3560x3750x45064510Approx cost (Each, 48PORT, POE+, 10G uplink, Dual PS, IP BASE)
6K7K8K45K75KMax Capacity192432432192384Backplane speed206464520520ProLeast ExpensiveStackable to 9Stackable to 9ProDual PSDual PSDual PSDual PSDual PSProLayer 3 opt
Layer 3 optDual SupsDual SupsConExpensiveExpensiveConNo Dual PSConLayer 2 OnlyCannot stack more than 4 
For the MDF I would like to use 2 Nexus 5548's with FEX's, and the layer 3 daughter board.  For the IDF's I was thinking of two 4010's.

View 12 Replies View Related

Cisco WAN :: Number Of MAC Entries Of Catalyst 3560X / 3750X Platform

Apr 10, 2012

Any info regarding the number of MAC Entries of Catalyst 3560X/3750X Platform?  I can find that number in 3560, 3750 ds but not in 3560x ds.

View 2 Replies View Related

Cisco Switching/Routing :: 3560x Or 3750x For Core Switching?

Mar 6, 2013

i cant find any difference in these two devices when i am trying to compare throughput.I need upgrade our new POP and there will be around 4900 MAC adresses in VLAN 150 and 130 MAC adresses in vlan 200.Uplink is 1 gig routed internet connection and there is 14 downlinks to separate villages.i found a few differences for eg stack interface on 3750x but i dont need it.  

View 2 Replies View Related

Cisco Switching/Routing :: 3560x Won't Boot

May 23, 2012

I unpacked a new 3560x and went to put our standard code version on it c3560e-ipbasek9-mz.122-53.SE2.  Everything seemed to upgraded fine but it won't boot to a console prompt.  It seems like it loads the IOS image fine but can't get passed the Front-end Microcode IMG MGR: Programming device 0. [code]

View 4 Replies View Related

Cisco Switching/Routing :: QOS For A 3560x Switch

Feb 9, 2012

We have a small site that has an Avaya voice switch connected to a c3560x switch.The avaya tech told us to set this on our ports to which the phone and the desktop are connected.

View 4 Replies View Related

Cisco Switching/Routing :: 3560X Not Connecting At 10 / Full

May 14, 2013

I have seen a similar post here from last year about a 10/half connection, but this is different.  I have a provider using a 2950 switch (they left CDP on so we can see it).  And we have to be set to 10/full to make this connection (as you know 10/half connected here would be or is horrible).  I have had this connection running on my 2921 router w/o issue but when I connect it to my 3560X, then I get no link light (shows down/down, not connected).
 
What else to know about what has been tried: Connecting link to switch with switch set to auto/auto (sp/dup). Speed is 10 (as it should be) but of course w/o the other side pulsing the voltage to know what to auto to, it defaults to half so this is unacceptabel, but, I do get a link light and can pass traffic, it's just a horrible experience.
 
Also tried the same setting speed and duplex vs. auto disco speed and duplex on other ports of the switch, no difference, same results. Also different patch cables, same results.
 
My current work around is to connect the providers 2950 (10/full) to my 2921 router @ (10/full) with a BVI to another port on the router which continues on to my 3560X at 1G/full.  And this works just fine.  Here's more info from my 3560X and the providers 2950:
 
3560X:
License Level: ipservices
License Type: Permanent
Next reload license Level: ipservices

[Code].....

View 11 Replies View Related

Cisco Switching/Routing :: 3560X Or 3750X Support GRE?

May 23, 2013

If the 3560 or 3750 "X" series support GRE.I am pretty certain the older 3750-E does not support GRE (both in hardware and software)Was hoping the new super duper X series do. If not, it could get expensive

View 5 Replies View Related

Cisco Switching/Routing :: 3560X Multicast Traffic Should Not Appear

Feb 18, 2013

I have a 3560X switch with interfaces 36-48 on the same LAN. All interfaces are switchports. Hosts on 38, 39 and 40 are multicast senders: all sending to the same single multicast address. Hosts on 36 and 37 are receivers, having joined that multicast group. I created an SVI for the LAN and put it in ip pim passive. (That is the only PIM mode allowed for an SVI with my IOS.) Show ip igmp snooping groups shows that 36 and 37 are the only interfaces in this group. I attach a laptop to interface 42 and Wireshark, and the laptop is receiving the multicast traffic. The laptop does not join the group. I expect it would not see the traffic.

View 4 Replies View Related

Cisco Switching/Routing :: 3560x Blocked ARP For 300sec

Jan 25, 2013

last week we have changed the connection of small town from licensed radio to direct fiber with clasic 1gig sfp.After that we have connected the new fiber , we can see 5 min outages of customer internet connection. If we are conncted on the same subnet anywhere on network, we can ping the customer all the time. But if we try to ping the customers public IP it is each 5 min for 5 min unreachable. I have tryed to sho logg in all switches but there are no mesasages. I just see, when comunication have lost, the MAC and IP of customer will disapear from routers ARP tabbel. What is going on?When i enter sho mac address-table i can see customers MAC address in all switches. There are exactly 5 min outages. 5min it runs ok, 5 min outage and it repeats agan.
 
I looks like the swith blocks the ARP packets from customers to their default gateway.The routers are connected to catalyst 3560x lan base ios, This switch is connected to another 3560x lan base ios and it is connected with fiber to ME3400 where are customers connected.

View 2 Replies View Related

Cisco Switching/Routing :: 3560X Crash And Reboot On IOS 15.0(2)SE

Jan 24, 2013

I have 3560X-24T-S switches with IP Services loaded at remote sites that I have been having troubles with.  Originally, they had IOS 12.2(58)SE1 on them.  I have up to four diverse paths via point-to-point microwave at the remote sites.  The Microwave equipment is by Microwave Networks and is a Prodeus M series which Ethernet support.  The original issue manifested itself as hardware loopback errors on some of the ports that were connected to the microwave links.  
 
My experience in the past has been that when a hardware loopback error occurred it is usually a bad switch port.  In this case however, if I disconnected all of the microwave Ethernet links and rebooted the switch and then connected the Ethernet connections to the microwave links again, everything works fine.  No hardware loopback errors.  That is, until the next switch reboot.  Then the hardware loopback error would return.  Interestingly, it would come back on different ports connected to the microwave links every time.  So if a reboot was done without disconnecting the microwave Ethernet links the hardware loopback error would change from one microwave link to another after each reboot.
 
I then went through and read the lengthy release notes for IOS version 15.0(2)SE and found several fixes that I thought could fix my issue.  So I downloaded it and updated a couple of the offending switches (not all of them were having this problem).  After going through the second update required to resolve the 'open file error' that happens going between 12.2(58)SE1 and 15.0(2)SE the problem seemed to be resolved on the offending switches.  So, I went ahead and updated the IOS on all of the switches with point-to-point microwave connections.
 
I now have one switch that was updated that is crashing and rebooting continuously when the Ethernet links for the point-to-point microwave are connected.  Again, if I disconnect all the microwave links and reboot, it comes up fine ands stays fine when the microwave links are connected back up.  It will work fine until the next reboot and then the crash and reboot loop starts over again.  Below is a portion of the putty log when the crash occurs:
 
----------------------------------------------------------------------------------------------------------------------
previous memory block, bp = 0x59BF838,
memorypool type is Processor
data check, ptr = 0x59BF860
========= Dump bp = 0x59BF87C ======================
  59BF77C:        0        0        0 FD0110DF AB1234CD FFFE0000       56  383FDB4
59BF79C:  212AC68  59BF838  59BF6F4 80000042        1        0  A504F53 543A2050
59BF7BC: 6F727441 53494320 506F7274 204C6F6F 70626163 6B205465 73747320 3A20456E

[code].....

View 1 Replies View Related

Cisco Switching/Routing :: Upgrading 3560x To IP Services

Oct 12, 2012

It would be so easy but failed to upgrade 3560X switch to ip services licence is bought and paid for mail and log from the CLI and tftp server attached

View 17 Replies View Related

Cisco Switching/Routing :: 3560 V2 Stacking With 3560X?

Mar 14, 2012

Im going to be ordering a new 3560X L3 switch (ws-3560x-48pf-s). We currently have a 3560 V2 switch and I've read it supports stacking, but looking at the back I just see a console port. Is there an extra card I have to get for this 3560V2 to make it stakable with the 3560X?

View 3 Replies View Related

Cisco Switching/Routing :: Which Sfp Ports In 3560x Switch

Feb 20, 2013

I was viewing the 3560x switch datasheet and i need network module C3KX-NM-10G. I have dark fiber with over 12 km distance to i guess i will be needing SFP EX for single mode.

View 3 Replies View Related

Cisco Switching/Routing :: Default Username On 3560x?

Feb 6, 2012

I am stuck at a very early stage in the configuration of 3560x switch. It seemed very unusual and that is the reason, I configured basic config for line con 0 with login local. And then I had just put "enable secret xxxxxx."
 
Now I simply logged out and when i tried logging in, it is asking for a username. Now the thing is that I had not programmed any username. I tried using just "." followed by my secret password, but it did not work.

View 6 Replies View Related

Cisco Switching/Routing :: 3560X How To Use Trial License

Oct 14, 2012

we just got brand new 3560X with LANBASE license installed. Wanted to confirm with a "show license"
 
To my surprice (output below) I hav IP Services evaluation. I tried to test with an "show ip route" and "ip route..." in configuration mode with no success. How do I use the trial license?
 
Switch#show license
Index 1 Feature: ipservices    
        Period left: 8  weeks 4  days
        License Type: Evaluation
        License State: Active, Not in Use, EULA not accepted
        License Priority: None
[Code]...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved