Cisco Switching/Routing :: GLC-GE-100FX - Connection To 3550 Switch Over MMF

May 21, 2012

i have an OM1 MMF fiber run between two switches, the first being a 3750 and the second being a 3550.
 
The link currently exceeds the maximum distance for OM1 @ 1000Mb/s (220m) so i would like to downgrade the link to 100FX using the necessary SFP's/GBIC's to extend the maximum distance to 550m and run the link @ 100Mb/s.
 
I have the part code for the 100FX SFP to install in the 3750 (GLC-GE-100FX) but cant find a 100FX GBIC for the 3550, can I use a 1000SX GBIC (WS-G5484) for the 3550 at one end and the 100FX SFP at the other? Any success with this configuration over MMF?

View 3 Replies


ADVERTISEMENT

Cisco Switching/Routing :: 3550 EMI Switch Is Not Responding To Power Connection

May 10, 2012

My cisco 3550 EMI switch is not responding to power connection. I have checked and changed power cable. its still not working.fan is not running and no lights on front panel

View 3 Replies View Related

Cisco Switching/Routing :: 3550 / Layer 3 Switch Not Routing?

Apr 26, 2012

I have a 3550 l3 switch configured as follows:

vlan 10 ports 1-10
vlan 21 ports 11-20
vlan 30 port 21-30
vlan 40 ports 31-40
default vlan should be vlan 21

I have the servers, switch and router connected to vlan 21.  Vlan 21 works great I can browse the internet, but I cannot ping any other vlans. router is connected to fa0/19
 
[code]
Building configuration... 
Current configuration : 4833 bytes
 !
 version 12.2
 no service pad

[code]....

View 11 Replies View Related

Cisco Switching/Routing :: VLan Routing Same Switch 3550-12T?

Mar 10, 2013

I'm having some problems setting up vlans to talk to each other on a 3550-12T switch. Its quite a simple setup I have, but I need to split my network up.
 
Currently I have a network of 192.168.25.0 255.255.255.0 I want to create a new vlan network of 192.168.30.0 255.255.255.0 So I have configured my vlan1 (default vlan) to have an ip of 192.168.25.250 for getting to the management page
 
I have created a vlan2 of 192.168.30.1 255.255.255.0 ?I have a port 10 linked to one of my 3560G's?In port 9 which is on vlan2 I have my pc plugged in with a static ip of 192.168.30.50 from the router I can ping any device on 192.168.25.x.
 
I can not ping 192.168.30.1 (which is my vlan2) nor can i ping the PC.
 
I have enabled ip routing  But I dont have a default route, this is becase we don't have a router on the network.

View 18 Replies View Related

Cisco Switching/Routing :: 3550 Upgrade To Gigabit Switch

Jun 4, 2013

I have a 3550 switch right now, and need to upgrade to a gigabit switch, so I'm looking at a 3560G-48.  For some reason I purchased an EMI version of my 3550, but run the ipbase image...what I need to look for - is a 3560G-48-s good for what I need?

View 4 Replies View Related

Cisco Switching/Routing :: Port Unreachable Messages On 3550 Switch?

Jan 24, 2012

While working at a client site today, I was troubleshooting some ICMP connectivity for a network we have created.I turned on 'debug ip icmp" on the 3550 switch int he middle, and was inundated with the following debug output:
 
Jan 25 11:01:14.641: ICMP: dst (172.16.1.7) port unreachable rcv from 172.16.1.5
Jan 25 11:01:14.641: ICMP: dst (172.16.1.7) port unreachable rcv from 172.16.1.5
Jan 25 11:01:14.641: ICMP: dst (172.16.1.7) port unreachable rcv from 172.16.1.5
Jan 25 11:01:14.641: ICMP: dst (172.16.1.7) port unreachable rcv from 172.16.1.5

[code]....
 
This output fires several times a second, and based on how often it is firing, I am curious if it may be a culprit with respect to the fact that the client has indicated that they have some slow internet.Should the next step be to look at the workstation at 172.16.1.5? 

View 10 Replies View Related

Cisco Switching/Routing :: Route-map Command Support On Switch 3550?

Sep 30, 2012

I have cisco switch 3550 IOS Version 12.1(19)EA1c.   
 
I can configure route-map commands on that.  but i can not apply that into any vlan interface.   while i try to apply the following command ( ip policy route-map PBR) on VLAN int i get an error msg saying that the command is not recognized.

View 3 Replies View Related

Cisco Switching/Routing :: Have HSRP Or GLBP Between Two Different Switch Like 3550 And 3560?

Dec 9, 2012

Can i have HSRP or GLBP between two different switch like 3550 and 3560?

View 3 Replies View Related

Cisco Switching/Routing :: How To Block Single Mac Address In 3550 Switch

Nov 16, 2011

I need to block this mac address in  my 3550 switch.i enable port security but this mac address comes and do the violation and port is shut down.

View 3 Replies View Related

Cisco Switching/Routing :: Catalyst 3550 Switch - Dynamic QoS Setup

Mar 28, 2012

I live in a condo building that uses 3 Cisco Catalyst 3550 switches connected to a Comcast router with 100 Mbps download. Currently we regulate bandwidth by providing each user with 3 Mbps download. Even if only two people are active they still only get 3 Mbps download. I would like to set it up so if two people are using they each get 50 Mbps; a sort of 'dynamic qos. Is this possible with these switches? Would we have to purchase a Cisco router in order to provide this feature?

View 9 Replies View Related

Cisco Switching/Routing :: Changing Native Vlan On 3550 Switch

Dec 22, 2012

I am having trouble after creating a management vlan (99) on a 3550 switch.I have configured the vlan (99) and given it an IP (192.168.1.100) and a default gateway (my router address - 192.168.1.99).I can ping to the switch from a PC and vice versa. The management VLAN IP is fine but now I cannot ping to the router from either the PC or the switch.It seems that just by adding VLAN 99 with it's own IP address has now prevented pings from the switch/ PC to the router ?Due to the fact that I have created a new switch management VLAN with an IP, does this mean I have set up the router as a 'router on a stick' scenario ? [code]

View 4 Replies View Related

Cisco Switching/Routing :: Enable / Disable Interfaces On 3550 Switch

Jul 14, 2012

I`m looking to automate some functions in a web application.Functions like enable/disable interfaces on a Cisco 3550 switch.

View 5 Replies View Related

Cisco Switching/Routing :: Internet Access For 3550 Switch VLANs?

Feb 22, 2012

I have a small cisco switch cluster (seven different 2924, 3524cisco switches) with 3550 as a cluster control which does all the inter vlan routing that works fine.
 
This cluster is in semi production PBX interop testing lab. This is a closed network without internet access and not connected to our corporate network.However now I have to add this capability so some equipment in the lab can get Microsoft updates over the internet.
 
I've created a port on a 3550 (fa0/19) and connected it to another network that has internet access. It picked an ip address and when I'm logged in to the 3550 I can ping hosts on the outside network. However I can't ping any hosts on that network from any hosts that are connected to my vlans.I've tried a few different things, but still can't make it to work.
 
Here is a short version of my 3550 configuration:

!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log datetime
no service password-encryption

[code]....

View 13 Replies View Related

Cisco Switching/Routing :: 3550 - Switch Disconnects Another Voip Phone?

May 14, 2013

im having this strange issue where everytime i plug in a voip phone to my 3550 the switch disconnects another voip phone.then to fix the disconnected phone (7940) i need to power off the phone 5-10 minutes then power it on again.

but the strange thing is, once i have to do that to fix the phone and connect the phone back to the switch, the port link is up, but no macs are seen on that port.

View 1 Replies View Related

Cisco Switching/Routing :: Switch 3550 - Command To Display GBIC In It?

Nov 9, 2011

Is there any command to display the GBIC in the switch because I need to replace 3550 but I have no exact part number

the model is WS-C3550-24-SMI
and try
sh inventory
sh hardware
sh diag
sh module

View 1 Replies View Related

Cisco Switching/Routing :: 3550 - Copy IOS To Switch In ROMmon Mode?

Jan 24, 2012

I have a 3550 switch that was replaced at a remote site with no IOS. This is a switch not a router so tftpdnld does not work.
 
[Code]...
 
The problem is the switches interface never comes up so try to connect to the tftp server. I read on google it can't be done on a switch to copy from tftp to flash in rommon mode on a switch and to use XMODEM. My problem is I do not have access to it, I ssh into a 3640 which is an access server for all devices and that is how I have console to it, how to use XMODEM over ssh.
 
But I'm fairly certain that there has to be a way to just copy it from tftp? I have a 3550 local and when I put it in rommon mode it stops the port check at port, port 1 goes from green when you plug it in to off then port 2 changes to amber and the rest green. So just by the look of this I would believe tftp would work; you just need to use port 1.

View 1 Replies View Related

Cisco Switching/Routing :: GLC-GE-100FX SFP Is Supported On Catalyst 4928

May 14, 2012

Does GLC-GE-100FX SFP is supported on the Cisco Catalyst 4928? Have tried the below link but it doesn't mention the 4900 series switches. url...

View 1 Replies View Related

Cisco Switching/Routing :: GLC-GE-100FX Supported On WS-C2960S-24TD-L?

May 10, 2013

Does GLC-GE-100FX is supported on the WS-C2960S-24TD-L.  I don't see this switch listed under the compatibility matrix.URL
 
But the datasheet for the 2960S says this:
 
"The Cisco Catalyst 2960-S with SFP+ does not support the GLC-FE-100BX, GLC-FE-100FX, or GLC-FE-100LX." But it provides no reference for the GLC-GE-100FX The easy answer is, no the 2960S-24TD doesn't support it, any clarification if possible.

View 1 Replies View Related

Cisco Switching/Routing :: 3550 Switch - Software Forced Crash Exception

Feb 7, 2013

Our switch had a little crash-fest this morning at 2:30 AM. I did find a web page about diagnosing Software Forced Crash Exceptions, but it did not look like ours was one of the more easily-identifiable ones.
 
It may be worth noting that we've only used this switch for about a month, everything seemed fine until now. When we got the switch it did not have any GigE modules, and this week we put 2 into it and have been using them for 2 servers.
 
It looks like the switch was crashing repeatedly over a period of 20 minutes, and then it stopped and normalized. In the logs of the router that this switch uplinks into, we could see the ethernet port flapping during the time that the switch wasn't reachable.
 
Here's the Show Stack on the switch:
 
Sfld_3550#    show stackMinimum process stacks:Free/Size   Name4404/6000   vegas_flash init3352/6000   SaveCrashBuffer5716/6000   CDP BLOB8512/9000   IP Background5596/6000   vqpc_shim_create_addr_tbl5584/6000   SPAN Subsystem5552/6000   SASL MAIN4944/6000   vegas IPC process8704/9000   cdp init process5404/6000   RADIUS INITCONFIG4928/6000   Vegas CrashBuffer5664/6000   URPF stats2536/3000   Rom Random Update

[code].....

View 2 Replies View Related

Cisco Switching/Routing :: 3550 - Export Mac Address From Switch To Local Machine?

Jan 8, 2013

I am working on Cisco 3550 switch on a certain requirement. I have got an access point connected to the switch and few mobile phones connected to the access point. I get the list of mac addresses connected to the switch ( Both access point's mac address & the clients addresses) by "show mac-address table dynamic" command. However, i am unable/confused to get the output of the following scenarios:
 
1. I would require to export the mac address from the switch to the local machine in any format (May be by using an SNMP tool, if available) so that the same needs to be used in my C# for development.What would be the way for the same ?
 
2. The mac address in the mac address table doesn't get updated dynamically. (Eg Scenario: A wifi client gets connected to an access point which inturn is connected to the switch, the mac address of the client shows up in the switch table. However if the client is disconnected, the client's mac address would still be displayed in the switch table )

View 9 Replies View Related

Cisco Switching/Routing :: 3550 - Unable To Ping Internet From HSRP Standby Switch

Nov 16, 2011

I have router connected to 2  3550 switches  directly. 3550A  and B  switches are running HSRP. OSPF is running between Router and 2 switches.
 
From Switch B  i can ping the Router Wan interface but not the internet sites. from Switch A  i can ping any sites?
  
Switch B 
3550SMIB#                          sh ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGP       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area       N1

[Code]......

View 7 Replies View Related

Cisco Switching/Routing :: 2960-S With GLC-FE-100FX Fiber Modules - Packet Loss

Apr 19, 2013

I have two 2960-s switches with GLC-FE-100FX fibre modules in and I am seeing packet loss over the link that is connected to the modules. When the interface is shutdown and brought back up it always comes up in half duplex even thought it is set to full in the config. I've seen other posts where you have to use the command no duplex then full duplex to get it to come up int full duplex. This does appear to work when I do a show int it says its full duplex however I'm stil seeing 20 - 40% packet loss on the link which suggests to me there is still a speed/duplex issue. The device at the other end is a Cisco 7200 which is set to 100Full. If I plug a Cisco 2811 into the fibre link I get zero packet loss which suggests its a problem with the switch.
 
I have changed the modules and fibre cables which makes no difference. As I stated at the start I have two 2960's both are showing exactly the same issue. Details of the switch are below the SFP are cisco branded:

Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 28    WS-C2960S-24TS-L   12.2(55)SE5           C2960S-UNIVERSALK9-M
 
interface GigabitEthernet1/0/25
switchport trunk allowed vlan 380,382,384,386
switchport mode trunk
duplex full(code)

View 18 Replies View Related

Cisco Switching/Routing :: Connection Between 3550 And Alcatel 6400

Oct 4, 2012

We encouter problems flow between two switches at work. The first is a Cisco 3550 and the second is an Alcatel 6400. For the tests, I connected a PC on each switches on acces port. The 2 switches are connected by a trunk port (the 24th for each switches).

I forgot to tell that the 2 switches are on the same vlan (5). I made some tests and it takes about 2 minutes to transfer 45mo from one pc to the other one.
 
I can give a part of the configuration :

! Stack Manager :! Chassis :system name vxTargetsystem daylight savings time disable! Configuration:! VLAN :vlan 1 disable name "VLAN 1"vlan 5 enable name "toip"vlan 5 port default 1/1vlan 5 ip 192.168.0.0 255.255.255.0! VLAN SL:! IP :ip service allip interface dhcp-client vlan 1 ifindex 1ip interface "toip" address 192.168.0.253 mask 255.255.255.0 vlan 5 ifindex 3! IPX :! IPMS :! AAA :aaa authentication console "local"aaa authentication telnet "local"aaa [code] ..............

View 2 Replies View Related

Cisco Switching/Routing :: 3550 / 3560 - Can Multiple Connection Between 2 Switches

Jul 9, 2012

For some special arrangement, I would like to connect 2 access ports from a 3550 switch to 3560 switch.1 port for vlan 200, another port for vlan 201.Will this introduce bad thing to the switches?

View 4 Replies View Related

Cisco Switching/Routing :: 3550 - Configure Firewall DHCP Server Through 10.1.1.0 Connection?

Oct 2, 2012

Is there a way to configure a DHCP server for my internal subnet of 192.168.20.1 which is on a 3550 layer 3 switch from my 5505 ASA Firewall.My subnet of 10.1.1.0/30 is connecting my 5505 to 3550. All I'm trying to do is run a DHCP server down to my hosts. The only options on ASA 5505 is
 
dhcpd address 192.168.20.1 - 192.168.20.254 outside or inside, which conflicts with my subnet of 10.1.1.0 used to connect my internal subnet of 192.168.20.1 for the whole network.
 
When I used my router it did not need the (inside, outside) keywords and just an ip helper-address command. How do I configure my my firewall DHCP server to propagate the 192.168.20.0 network through my 10.1.1.0 connection.

View 3 Replies View Related

Cisco WAN :: Routing Between Routed Ports On A 3550 Switch

Aug 24, 2011

I have 2 3550's connected across a wireless link. [code] However, from Switch A, I cannot reach 10.1.3.9Can this 3550 not route traffic between 2 routed ports?

View 8 Replies View Related

Cisco Switching/Routing :: 3550 / Routing Protocol Neighbor Between SVI And Routed Port?

Apr 18, 2012

I have a collapsed core design with routed ports between all components. Access layer switches, data center switches, core/aggregation. All routed (no spanning-tree at all).Now...I have to add an IBM BladeCenter with a BNT layer 3 switch to my topology. However, those nasties don't seem to support routed ports.How can I have a routed port on my cisco switch and a standard access port on the BNT and still establish an adjacency with an SVI? I am running OSPF, but I am labbing this in my home lab with 2 x 3550s and EIGRP.
 
On SW2:
*Mar  1 00:57:00.711: EIGRP: Received HELLO on Vlan100 nbr 10.1.1.1
*Mar  1 00:57:00.711:   AS 999, Flags 0x0, Seq 0/0 interfaceQ 0/0 iidbQ un/rely 0/0 peerQ un/rely 0/1
*Mar  1 00:57:02.303: EIGRP: Sending UPDATE on Vlan100 nbr 10.1.1.1, retry 9, RTO 5000 tid 0
*Mar  1 00:57:02.303:   AS 999, Flags 0x1, Seq 17/0 interfaceQ 0/0 iidbQ un/rely 0/0 peerQ un/rely 0/1

[code].....

View 10 Replies View Related

Cisco Switching/Routing :: Does Catalyst 3550 Support Inter Vlan Routing

Jul 24, 2007

Does Catalyst 3550 switch support inter vlan routing ?

View 12 Replies View Related

Cisco Switching/Routing :: 3550 - IP Routing In L3 Capable Switches?

Apr 11, 2012

Is L3 ip routing on by default in 3550s?  If so is the "ip routing" command visible in the config file?  If no - I assume that one would enable L3 routing with that config command.In general terms are there any IOS devices where ip routing is enabled and one would not see the "ip routing" command in config.  I.E. if that command is not visible in the config could you assume there is no L3 capablity in that device?

View 1 Replies View Related

Cisco Switching/Routing :: Configure Routing Between 2800 And 3550

Sep 18, 2012

The layer 2 switches are connected to layer 3 Switch via trunks, and routing between layer 2 switch ports with configured SVI's on 3550. All working fine. Now I'm trying to configure routing between 2800 and 3550, I tried connecting both Straight Throught and Crossover cables to the 2800 Fa0/0 and Fa0/1 ports as well as the switchports on 3550
 
No switchport commands are configured however, the lights do not go on for both straight through or crossover cables. I tried connecting 1750 routers but same result. My goal is to have all the VLANS routed to the internet with configuring NAT translation the router.

View 2 Replies View Related

Cisco Switching/Routing :: 2600 / 3550 - InterVLan Routing

Dec 2, 2011

I've been working with these two Cisco devices in my home off and on for several months now but I just can't take it anymore, I'm about to throw them away and go back to Linksys router.
 
I have a Cisco 2600 Router with only one Ethernet card in it so I have to trunk from my 3550 Switch to that device.  I'd like to have my ISP and all users plug into switch and all trunk back to the router's sub interfaces. Currently, I have started over...again, and am unable to simply get the router and switch to ping each other if I put sub-interfaces on the router.  See my configs:
 
2600 ROUTER:
Router#sho run
Building configuration...
Current configuration : 555 bytes
[code]......

3550 SWITCH:
Switch#sho run
Building configuration...
Current configuration : 2302 bytes
!
version 12.2
[code]..........
 
Port F0/24 is in VLAN 1, as are all ports but Port F0/1 which is my desktop PC. I mocked it up in Packet Tracer and it works just fine.  This is just a simple setup and I'm making sure I can ping between switch and router before I move to each next step.

View 40 Replies View Related

Cisco Switching/Routing :: 3550 - Rip 1 Across Different Vlans

Jul 24, 2012

The situation include 2 cisco routers an 2 switch 3550
 
so we have  Router A  in Vlan x access ----->Sw1----Trunk----Sw2<------Vlan y Access Router B I 've to enable rip1 on guys A and B ONLY !!! Avoiding any kind of tunnel I though it was all around fallBAck bridging ... but after days of tries ...

View 3 Replies View Related

Cisco Switching/Routing :: 3550 QOS For Voice Over IP

Oct 25, 2011

We're looking at implementing a new phone system which will use voice over ip. Currently we have a mixture of Cisco 3750 and Cisco 3550 switches which don't support power over ethernet. Its been suggested we could continue using the current switches and power the new phones using power adapters.
 
Int terms of implementing qos (we don't have any at the moment) for the voice will a Cisco 3550 be OK and will having a mixture of different models using 3550 and 3750 pose any challenges with the qos policy for the voice. I believe there are differences in that the Cisco 3550 doesn't support srr-queues but having little experience with qos I'm not sure what impact this will have if any?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved