Cisco VPN :: ASA 5505 / OSPF Redist Of SSL Client IPs?
May 2, 2011
I'm setting up our ASA 5505 for remote access VPN and now need to insert the VPN client addresses (allocated via RADIUS) into OSPF so that they get redistributed through our network.
The configuration of the ASA is that its hairpinning because it is behind an existing router/firewall (192.168.252.254), therefore it only has an inside interface (plus one for management).
The VPN access works fine as long as I have a static route on our router/firewall pointing the VPN clients network range to the ASA. But once I configure OSPF with a redistribute static (because VPN client addresses get added the the ASA as statics), a host route (which is fine) gets added to our firewall with a next hop of the router/firewall itself and not the ASA.
ieVPN Client route on the ASAS 192.168.242.75 255.255.255.255 [1/0] via 192.168.252.254, inside (not to sure if this is expected behaviour - would have thought it should be a Connected route)
VPN Client route on the Router/Firewall
192.168.242.75 192.168.252.254 UGH 0 1246 em2 (I would have expected that OSPF should have put this in with a gateway of .200)
Route in the ASA OSPF database192.168.242.75 192.168.252.200 839 0x80000002 0x9e45 0
View 3 Replies
ADVERTISEMENT
Mar 20, 2012
i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
View 5 Replies
View Related
Sep 22, 2011
I have 2 ASBR routers, AGFR01RTR03 and AGFR02RTR03, performing OSPF to OSPF redistribution in both ways for the same ***. They also do summarization for our private addressing scheme. It is all working just fine for that part (neighbors, summarization, redistribution).
AGDC01RTR01 --- AGDC02RTR01 (OSPF 1000 ABRs)
| |
| |
AGFR01RTR03 --- AGFR02RTR03 (OSPF 1000 / 53 ASBRs)
Let's focus on AGDC01RTR01 with a specific entry here (IP subnet is fake) :
Routing entry for 1.1.1.0/25
Known via "ospf 1000", distance 110, metric 300, type inter area
Last update from 10.2.244.76 on GigabitEthernet5/1, 1d03h ago
Routing Descriptor Blocks:
* 10.2.244.76, from 10.2.1.249, 1d03h ago, via GigabitEthernet5/1
Route metric is 300, traffic share count is 1
[code]...
View 15 Replies
View Related
Mar 14, 2011
Currently the OSPF network consist of 2 segment route via static route.One is AREA 0 and another AREA 10.Both network are seperate entity, only static route to route between 2 networks.But the static route do not provide the dynamically and flexibility, I plan to run routing between 2 networks via VLAN160 and VLAN162.
I still want to manitnace it was 2 different OSPFrouting domain.Can I run OSPF with differrent OSPF porcess ID?
View 8 Replies
View Related
Jun 15, 2012
We are setting up a test lab in our DMZ. The path to the internet is basically like this. Anything past the firewall is irrelevant. For this lab lets assume it is vlan 300.
LAB SW ---> DMZ-SW ---> ASA FW ---> INTERNET
LAB IP Range = 172.16.300.0 /24
GW = 172.16.300.1 (On FW int)
Trunked all the way through.
I have an int vlan set up on the LAB SW. It is being trunked to DMZ SW. DMZ trunks it to ASA FW where there is a failover with a redundant switch.On the ASA the interface 0/2 is a subinterface 0/2.300 being used as the default gateway.
I have DHCP running in a specific range on the LAB SW and do get an ip address when plugged in. I cannot ping the default gateway on the ASA FW.The GW is defined using default-router command for 172.16.300.1 i.e. default-router 172.16.300.1?
We are running ospf on the firewall. There appears to be a pattern with ospf and a similar subnet setup elsewhere. I was wondering based off of this info would configuring ospf for 172.16.300.0/24 allow me to ping the GW from a client on the LAB SW.Secondly. I trunked 300 on the DMZ SW but I didnt add the vlan to the configuration. i.e. conf t <enter> vlan 300 <enter> Does this really matter? Or is having the vlan in the configuration only pertain to access mode on interfaces?
View 1 Replies
View Related
Nov 17, 2012
We have a Cisco 5505 firewall and working to setup VPN through the firewall, what Cisco vpn client should we download for our users to have the right client on their desktop/latops.
View 3 Replies
View Related
Jan 3, 2012
There is a Cisco VPN client (running on Windows 7) and an ASA5505. The goals are client could use remote gateway on ASA for Skype and able to access the devices in ASA inside interface.
The Skype works well but I cannot access devices in the interface inside via VPN connection. Following is the config, how to correct NAT or VPN settings?
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password wDnglsHo3Tm87.tM encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
[code].....
View 3 Replies
View Related
Oct 29, 2011
I find it troubling that i would have to pay for additional licensing to use the mobile version of anyconnect.
Is there a third-party app that will allow a secure connection back to my house from my iPhone?
View 11 Replies
View Related
Feb 16, 2013
I have a client that has a 5505 installed. They want to VPN in with their Win7 laptop, but they don't want to shell out $1000 for the 10-pack Cisco VPN client.I have successfully setup the clientless VPN, and they can, through a browser, get to their files, but they'd like to map network drives so it's just like they're in the office.I tried setting the IP Sec up on the 5505, and then using the built-in Win7 VPN network connection, but no go.I also do everything through the ASDM, but I realize some things cannot be done. I'd prefer to use the ASDM!Anyone else get this configured? 99% of what I see out here is how to connect the 5505 for site-to-site VPN.
View 4 Replies
View Related
May 13, 2012
We recently upgraded our 5505s to 8.2(5) 26 and noticed that each will crash after a cerntain amount of time. Some crash every 30 minutes other will crash every 4 to 8 hrs. The only difference would be the user's home ISP and/or home router, if they have one. They are configured with a dynamic dhcp IP address for the outside interface and the crash files starts with the following:When we downgrade back to 8.2(5) 13 the problem goes away. Any known bugs for this version? I haven't been able to find anything yet. We do have one 5505 that does not have this issues. The only thing that may be different is that it was never at 8.2(5) 13. We had downgrade it from a 8.3 version.
View 2 Replies
View Related
Apr 12, 2011
I am unable to connect to the vpn I set up on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 are below.
LOG CISCO VPN CLIENT
Cisco Systems VPN Client Version 5.0.06.0160
Copyright (C) 1998-2009 Cisco Systems, Inc. All Rights Reserved.
[Code]......
View 2 Replies
View Related
Feb 19, 2011
We have a RA Vpn split_tunnel setup in one of our locations which is working fine in all areas except for traffic destinged for one specific website using https. This vendor only allows the HTTPS connections to them to come from certain outside IP addresses. ssentially it should work like this:RAVPN_client (10.4.4.0/27) --> https request to vendor_ip (208.x.x.x) ---> ASA55XX --> NAT_to_outside_ip --> https request to vendor_ip (208.x.x.x) need to understand how you would go about NATing ONLY this specific https traffic from the RA VPN while not having to alter the setup otherwise. Internal hosts (aka behind the ASA physically) do not have any issue getting to this site, as its nat'd to the outside ip address as we expect.Here is what we are using for the NAT Exemption list he 10.2.2.x, 192.168.100.x and 172.23.2.x are other remote sites that we have. RA VPN users are using the 10.4.4.0/27 do not have any issues connecting to them, no matter the protocol.
View 3 Replies
View Related
Feb 2, 2012
I try to configure a simple EzVPN infrastructure:
EzVPN Server (CISCO2811, hostname cme) < -- > EzVPN Remote (ASA5505, hostname ezvpn-asa) < -- > Client
Attached you find both configuration of the EzVPN server and remote. The tunnel is getting up and if I ping from the ASA to the Router, I see the packets getting encrypted:
ezvpn-asa# ping 172.16.100.1
...
ezvpn-asa# show crypto ipsec sa
interface: outside
Crypto map tag: _vpnc_cm, seq num: 10, local addr: 172.16.100.2
[code]....
If I connect a client with IP address 192.168.1.2 to the interface eth0/1 and do a ping to the cme, I don't see any packets getting encrypted. I don't have any idea about VPN, I just need it for a wireless lab environment. What do I have to configure on the ASA, so the inside traffic is encrypted?
View 2 Replies
View Related
Oct 19, 2009
I get the following error when trying to connect a vpn client through an ASA5505 with an already configured ipsec AES/256 site to site connection:
regular translation creation failed for protocol 50 src:inside:192.168.1.167 dst:outside:xx.xxx.x.64
The site to site addressing is not relevant, I'm not trying to pass traffic over the site-to-site, but rather create a new vpn from inside client to outside external vpn box that's not under my control. The client is able to create a connection, but no traffic is passed, when I try to ping / rdp, the above message is returned to me. If I add the rule static(inside, outside) interface 192.168.1.167 netmask 255.255.255.255 then it works, everything works, but ONLY from this computer.
Been Google for hours, but with no result as of yet.
View 6 Replies
View Related
Jul 11, 2011
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.
The Cisco ASA has the 50 internal user license with 10 VPN peers.
We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails.
Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences?
This seems to be the issue from what I can see, just need confirmation.
View 1 Replies
View Related
Mar 10, 2013
I have an ASA 5505 that is on the perimeter of a hub & spoke vpn network, when I connect to this device using the VPN client I can connect to any device across the VPN infrastructure with the exception of the sub net that the client is connected to, for instance:
VPN client internal network connects to 192.168.113.0 /24 and is issued that ip address 192.168.113.200, the VPN client can be pinged from another device in this network however the client cannot access anything on this sub net, all other sites can be accessed ie. main site 192.168.16.0/24, second site 192.168.110/24 and third site 192.168.112/24. The ACL Manager has a single entry of "Source 192.168.113.0/24 Destination 192.168.0.0/16 and the "Standard ACL 192.168.8.8./16 permit.
View 14 Replies
View Related
Mar 8, 2012
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.The Cisco ASA has the 50 internal user license with 10 VPN peers.We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails. Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences? This seems to be the issue from what I can see, just need confirmation.
View 3 Replies
View Related
Feb 13, 2012
We have a cisco asa 5505 on which we have setup a group VPN. The VPN connections from all cisco vpn clients works fine except one. The keep getting the below error
"Secure VPN Connection terminated locally by the client. Reason 412: The remote peer is no longer responding. Connection Terminated".
Not sure why only one client won't be able to connect. The version we are using is 5.0.02 for VPN client.
View 10 Replies
View Related
Jan 27, 2013
Got some issues when setting up IPSEC/VPN on the asa 5505. I want to connect from the ipad with the built in IPSec client..Get these errors when i run the debug crypto isakmp.
View 6 Replies
View Related
May 6, 2013
I am working with a small off that has a 5505 acting as a basic firewall. Behind it are off-the-shelf unmanaged switches. Two users have to work with an outside vendor and are having issues. They have a Sonicwall remote VPN client on each of their desktops and use this to connect to the vendor. They then RDP into VMWare-based Windows 7 desktops at the vendor's site to do their work. Randomly throughout the day (6-10 times per day) while they are actively working the RDP session will disconnect. It will auto-reconnect after a few seconds. The VPN log on the clients never show any issues. I believe this is an RDP problem because while the RDP session is disconnecting, their VPN client is not (it is set to NOT auto-reconnect if it gets disconnected so that I will know for sure if it gets disconnected). I don't see anything in the ASA's logs about denying connections involving their PCs and the remote VPN peer IP.
View 7 Replies
View Related
Apr 15, 2013
I already have traditional IPsec VPN access working just fine through this device. Users connect and authenticate using a windows AD server for RADIUS and everything works great. However, the customer wants to use AnyConnect instead of the traditional VPN client. So I added a SSL connection profile (the anyconnect essentials feature is enabled on the device) and told it to use the same IP pool and RADIUS server group as the IPsec clients. I used the ASDM wizard to configure it and had no issues completing the wizard. when trying to make a connection to the webvpn portal I get a 404 error instead of the client portal. Also when trying to connect with the Anyconnect client, I get the usual "Untrusted VPN certificate" warning, but the connection attempt fails when I click through it.The strange part is when I look at the issued certificate in the browser or the client, it's showing me the certificate from the RADIUS server. Why is it looking there for certificate and more importantly, why does it care at all about a certificate when I've specified in the connection profile to use AAA to authenticate?
View 1 Replies
View Related
Dec 20, 2011
I have difficulties with configuring Remote IPSec VPN with Cisco ASA 5505 and Windows 7 native VPN client. My client PC gets VPN pool IP address, and can access remote network behind ASA, but then I lose my internet connectivity. I have read that this should be an issue with split tunneling, but I did as it is told here and no luck.On Windows VPN Client settings, if I uncheck "use default gateway on remote network" I have internet connectivity (since client is using local gateway), but then, I cannot ping remote network.In log, I see this warnings of this type:Teardown TCP connection 256 for outside:192.168.150.1/49562 to outside:213.199.181.90/80 duration 0:00:00 bytes 0 Flow is a loopback (cisco)I have attached my configuration file (without split-tunneling configuration I tried). If you need additional logs I'll send them right away.
View 4 Replies
View Related
Sep 16, 2011
Is there any way to always assign the same IP address to an AnyConnect VPN client logged into an ASA 5505 running v8.4?2
View 2 Replies
View Related
Feb 8, 2012
I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. Any link or some material to config ipsec vpn client at asa 5505 version 8.4.
View 1 Replies
View Related
Jul 5, 2011
I have a site to site vpn set up. I want to be able to manage the Cisco ASA router from a computer that connects to this site to site vpn. The problem is when I enter the ip address of the asa into adsm I get this error: Unable to launch device manager from 192.168.14.1:444. I am also unable to ping 192.168.14.1 from any computer that connects to the VPN, but I can ping other devices on the 192.168.14.x network. Also devices on the 192.168.14.x network can access the asa no problems. Here is my config:
ASA Version 8.2(1)
!
hostname Hostname
enable password POgOWyKyb0jgJ1Hm encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
[code]....
View 1 Replies
View Related
Jun 3, 2013
I have two ASA5505 with a site to site VPN.One of the ASA is connected to the internal network 192.168.150.0.The other one is connected to 192.168.151.0.
I have also configured IPSec Cisco client VPN to the one which is plugged to 192.168.150.0.
I would like to know if it is possible for a client connected with the Cisco VPN to access the network 192.168.151.0 through the site to site VPN.
View 3 Replies
View Related
Nov 11, 2012
We currently have an ASA 5505 Firewall with VPN services configured. The system is running ASA Version 9.0.0 and ADSDM 7.0.2. I installed the "Cisco AnyConnect Sercure Mobility Client" Version 3.1.01065 on my Windows 7 Ultimate PC. When I try to connect to my VPN service I ge the following message:
Security Warning: Untrusted VPN Server Certificate! AnyConnect cannot verify the VPN server: XXX.XXX.XX.XX
-Certifiate does not match the server name
-Certificate is from an untrusted source.
-Certificate is not identified for this purpose.
Without purchasing a certificate from a 3rd Party vendor, is it possible to register a "Self" generated Certificate to get rid of this message? If so are there any "Detailed" (e.g., simplified or not in Cisco-eeze language) instructions on how to setup the Firewall to "push" the certificate to the VPN client so the message doesn't come up for the user?
View 5 Replies
View Related
Mar 16, 2011
Setting up vpn using quickvpn client to asa5505. QucikVPN client version is 1.4.1.2. I need to use port 60443, port 443 is already taken.
View 1 Replies
View Related
Apr 3, 2013
I´m tring to configure ASA 5505 with VPN Cleint, to access a remote network over a L2L with another ASA 5505, but no sucess. Is there any special feature to this work?
View 2 Replies
View Related
Apr 2, 2012
Trying to figure out how to configure the VPN client side to access a remote LAN.
Lan A - 172.16.17.0 - ASA5505 8.2(3)
Lan B - 200.200.0.0 - ASA5510
Cisco Client - V5
At present there exist a VPN tunnel between LAN A and LAN B. The client has a VPN tunnel to LAN A to run software package X on the LAN A server. The client also needs to run software package Y which needs access to a database on LAN B. The computers on LAN A have no problem using package Y since a VPN tunnel exist between LAN A and LAN B. How can I get the Client to also access LAN B on the same tunnel created when the client connects to LAN A? I can't seem to get packets that are directed to LAN B to cross the Client tunnel to A which would then hopefully move onto the LAN A/ LAN B tunnel.
View 2 Replies
View Related
Apr 28, 2011
So I have three ASA 5505 firewall. my firewalls we are in the test environment. I read on the net that when you have a situation like in my company where are headquarter and two offices, i should put in each branch office and headquarter one asa firewall and a firewalls should be configured as easyvpn.
VPN server is in headquarter and easyvpn's are in branch offices. i tried everything, but we could not configure them. maybe it's not a problem that in my test environment at my the external interfaces which have static addresses on these three firewalls, respectively serever 192.168.2.1, 192.168.2.2 and 192.168.2.3 client client. I seted firewalls by following the instructions, but does not work
[URL]...
I solved the problem with the server as a remote access VPN. client workstations that are on the 192.168.2.0/24 network can access a local LAN via VPN. But when you put the ASA 5505 firewall. clients on the LAN side of the firewall can not access the VPN. I use software products Cisco VPN Client 5.0.06, but when I create a connection and try to connect to get an error secure vpn connection terminated locally by the client. reason 412: the remote peer is no longer responding.
View 2 Replies
View Related
Jun 10, 2013
Any connect vpn client no internet access.
Below is configuration.
ASA Version 8.2(1)
hostname ciscoasa5505
Interface Vlan1
nameif inside
security-level 100
ip address 172.16.0.1 255.255.0.0
[code]...
View 1 Replies
View Related
Mar 3, 2013
I need to use a Cisco ASA 5505 on a BT Openreach connection, The configs that I have ben using are below -
interface vlan2
nameif outside
security-level 0
[Code]....
View 1 Replies
View Related
