Cisco VPN :: ASA 8.2.2 Locking Down Anyconnect Authentication To AD Group
Nov 28, 2011
I can't seem to find any documentation to how to get this working. I'm trying to make it so that only users of a certain AD group are authenticated for my Anyconnect VPN on my ASA 8.2.2
I've found the documentation on how to prevent logins using the msNPAllowDialin attribute, but not how to base it on group membership (memberOf) [code] I need to do any kind of restrictions inside the actual group-policy TESTGROUP ?
View 2 Replies
ADVERTISEMENT
Feb 6, 2013
I just started configuring AnyConnect with ASA 5520 that uses Cisco SecureACS to pass radius authentication. I configured two profiles with different split tunnel restrictions and what I discovered is that when the client connects to the ASA, they are provided a choice of these two groups (I guess there is no way to restrict this) and I can log into either one with any user account. How do I restrict this so that the user can only use one profile? Currently users capable of VPN would be placed in one specific AD group so that is what SecureACS checks. Is there a sample configuration guide to handle multiple profiles with different levels of access?
View 3 Replies
View Related
Dec 2, 2012
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 7.0(2)
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
#show webvpn anyconnect
1.disk0:/anyconnect-win-3.1.00495-k9.pkg 1 dyn-regex=/Windows NT/
CISCO STC win2k+
3,1,00495
Hostscan Version 3.1.00495
Profile in atthach-file. After this profile is uploaded to client Optimal Gateway Selection doesn't work propertly: When 'vpn1.mydomain.com/mygroup' (it best TTL server) is unreachable, then OGS try to be connected to other servers, but without group-url, for example 'vpn2.mydomain.com' (instead of 'vpn2.mydomain.com/mygroup')
View 2 Replies
View Related
Apr 25, 2011
I'm sure it can be done just haven't been able to find it. I'm running ACS 4.2 and have 2 network groups, one is wireless where I have a WLC and the other is the default where vpn users authenticate with their tokens. Is there a way to have the Wireless network group authenticate using AD and the other group use RSA? I can't find the switch or switches I need.
View 1 Replies
View Related
Feb 3, 2011
I am configuring windows nt authentication on asa 5520 firewall for clientless web vpn. is there a way i can specify to only authentication from the specific AD group only using windows nt or other way?
View 1 Replies
View Related
Jul 24, 2011
I've configured RA VPN on ASA5520 with OpenLDAP server authentication. It works fine for all the users existed in LDAP database, but my requirement is I want one particular group to be able to access VPN and not all the users. I have checked most of Cisco documents but all are leading to Microsoft's AD and LDAP attribute map creation. Is there any way to achieve the same thing with OpenLDAP server and not with AD?
View 4 Replies
View Related
Aug 15, 2012
I have to WLC's a 4402 and 5508 in a mobilty group. they are both running 7.0.116.0. They are configured to use Web Authentication. We are having complaints that Users are having to re-authenticate when moving around the office. My theory is they are moving from one WLC to the other and then requiring to re-authenticate.
View 5 Replies
View Related
Sep 19, 2010
I have been configuring anyconnect VPN. The requirement from customer is to configure MAC address based authentication for anyconnect clients. I have gone through various cisco documents. I couldnot find this option explained. Is MAC address based authentication possible in anyconnect vpn without having AAA server in place?There is an option to select end point attribute as MAC address, while creating Dynamic access policies. But at the host scan configuration of Cisco secure desktop, there are no options for performing MAC retrieval.
My ASA is running on version 8.2(1) and ASDM version 6.3(1) and a memory of 512 MB RAM. Any way for MAC based authentication in cisco anyconnect VPN.
View 3 Replies
View Related
Mar 3, 2013
I have a query regarding MAC authentication for end systems on ASA 5520. Inspite of proving MAC address in endpoint authentication along with AAA, only AAA attribute policies are getting created. MAC authentication is not happening.
Is there any requirement like LDAP or AD is required for MAC authentication?
View 1 Replies
View Related
Dec 20, 2012
I am doing a proof of concept with anyconnect and certificate authentication. with 3.0 i was able to do this with a certificate from my CA and a client cert in a smartcard. I have upgraded to 3.1 and now it doesnt work anymore ( i need 3.1 and Asa 9.0 because of IPv6 Split-tunneling).Reading the forum i got some info that the ASA cert must have a EKU value of 'Server Authentication' and the client cert must have a similar EKU (client Auth)
View 4 Replies
View Related
May 16, 2013
I'm on an ASA 5510 running 8.2(5)41. I have clientless WebVPN configured to authenticate against an RSA RADIUS server, which has users assigned to RADIUS Class attribute 25 to match the group-lock values assigned to each ASA group-policy. This of course is to ensure users can only access the login page's drop-down VPN profiles they are assigned to by the RADIUS server. I have two other ASA 5510s (same code level) using the same RADIUS server with group-lock enabled but for IPSec remote access VPN's, and the group-lock feature works fine.
WebVPN, however, is authenticating any user to any VPN profile without regard to the RADIUS Class attribute 25 they are assigned. If I configure the VPN profiles to authenticate locally and assign group-lock to individual ASA user accounts, group-lock works. As soon as I point it back to the RADIUS server, group-lock does nothing. From the 'debug aaa' below for user 'corpvpnstp', you can see the RADIUS server sends back the attribute 25 values of "ou=stp.Client;" and "ou=stp.ClientDRC;" for this user. The ASA profile this user has attempted to connect to is "EMS-Admin", which should get denied by the ASA. Instead, the ASA successfully authenticates the user.
View 4 Replies
View Related
Dec 13, 2011
In the WLC there are two groups (say A and B). How would I take group B and point it to a RADIUS server for authentication? The server is ping reachable. I have searched but did not see any definitive answer.
View 3 Replies
View Related
Apr 8, 2011
can i have on asa 5510 multiple pools and multiple group authentication for various departments along with restricted access if any
View 3 Replies
View Related
Nov 25, 2012
I had a problem about authentication use AD group member. Below webiside is the way I config on ACS.
[URL]
I'm using ACS 5.1.0.44 and this version has a bug , ACS cannot read AD group. I have to add it manually . After I change the access policy from Internal user to AD1. I can use anyone AD ID to pass authenticaiton. I finished all config from the website had same result.
I checked the access polices -- default device admin -- authorization , the new rules I created had no hit count. How can I make sure that I make a right config ?
View 2 Replies
View Related
Jan 17, 2012
I would like to configure RADIUS authentication and authorization in ASA 8.2 (ADSM 6.2) by configuring Cisco anyconnect VPN client connection profile.So the end result would be user enters his username, password and a token in any connect client, then the RADIUS server validates this information and sends the user attributes to ASA upon successful authentication.I would be grateful if i can get the step by step procedure to achieve this:The below is what iam trying to do:
1) Create an AAA server group.
2) Add the AAA server to this group (here its RADIUS).
3) create an LDAP-cisco ASA group mapping (for authorization)
3) Add a group policy and create IP pool. (We can add two types of group policies, one is internal and external. Not sure which one to select here).
4) create a any connect vpn client connection profile. Here we specify the created server group name, IP pool and group policy.(While creating a connection profile, it asks us to select an interface. As of now i have only one interface which is "inside". Not sure what the interface "outside" means).
View 5 Replies
View Related
Dec 26, 2012
I have configured an Asa 5510 as SSL vpn gataway ver 8.2(4) Anyconnect Essential. The clients are authenticated via Radius and OTP password.All work well since yesterday. When I have did same configuration changes. My objective was has that the clients accept the self signed certificate issued by the Asa whitout give the warning about the private cert.
So I have try to generaste a new certificate with FQDN equal to myasa.mydomain.com and also a CN=myasa
Then I have change the profile XML file of my anyconnect in this way: [code]
View 1 Replies
View Related
Dec 18, 2012
Recently we updated to the Anyconnect 3.0 client. I see the new 3.1 client is out and we are currently testing it for production. My question though is since updating to 3.0 our end users receive a message at the bottom of their client stating "No valid certificates available for authentication" They can still VPN in since we dont do certificate based authentication but we have been getting tons of questions on this. I would like to stop these messages from appearing and I am not sure if its just how the new client behaves or if its something configured on our ASA's.
View 1 Replies
View Related
Jul 8, 2012
I have an ASA 5520 and I am having trouble getting the AnyConnect VPN authentication timeout feature to work properly. I thought I did have it working a couple of months ago, but right now it is not giving me more than the default 12 seconds. I have tried intervals of anywhere from 25 seconds up to 120. I am currently runnign version 6.4 on the ASA and AnyConnect 2.5.3055.
View 8 Replies
View Related
Apr 15, 2013
I am deploying ISE with WLC 7.4. I have two SSID(s) running in my network 1. Corporate & 2. Services. I have a domain setup lets say "AD.com" with 4 groups 1. Corporate, 2. Services, 3. Employees, 4. Contractors.Here is an example of the scenario that I want:
AD.com Group : Corporate's User : 1. C_USER1
2. C_USER2
3. C_USER3
4. C_USER4
5. C_USER5
[code]....
Now what I want to do is have 802.1x authentication on my Corporate SSID that will check in AD.com, ONLY AND in ONLY corporate group for authentication. That is only C_USER1 to C_USER5 are allowed to connect to it. Users from any other AD group shouldnt be authenticated on this SSID.The same for the services group & SSID.
View 2 Replies
View Related
May 29, 2012
I have a need to utilize two factor authentication using a machine certificate and users AD crednetials. What we would like to do is to have the ASA and AnyConnect verify the certificate exists, check against our in house CA for validity, if valid pass the user credentials to the AD servers and establish the tunnel. If not valid quarantine the session and pop a message to the user to contact the help desk ASAP. My guess is the following (using ASDM 6.6, ASA 8.6.1, ASA 5545-X):
1. under the connection profile I have select BOTH for authentication and added a AAA server group.
2. under Cert Management I have added the 3 certs that are present on all company mobile assets
- Cert America
- Cert Europe
- Cert Root
3. I have an identity cert installed from the company CA and it is selected as the device cert under connection profiles
4.Local Cert Authority is Disabled
5.Under Remote Access>Advanced>Certs for AnyConnect>
- I have mapped DefaultCertifiateMap pri 10 to Company_Cert connection profile
- The mapping is looking for Subject: CN: <Contains> (string) ----where string is a common component of each Cert listed in #2.
Question #1 - Is this correct for utilizing certs and AD auth or have a missed any steps?
Users are directed to a an initial installation URL - where the AnyConnect client performs the installation and passes down the intial AC profile which auths using only AD creds. On subsequent connections users who pass the certificate mapping check are migrated to the connection profile which uses the dual authentication method.
Question #2 - When I attempt a new installation of AnyConnect using the two factor URL . I receive an error "certificate validation error" and the installation fails - for the life of me I can not figure out why???? The machine has all three certs, using IE9 as the browser.
View 3 Replies
View Related
Jan 22, 2012
I want to connect with AnyConnect Secure Mobility Client 3.0.2052 to ASA 5540 Version 8.4 and SSL Premium License.The clients using Maschine Certificate to authenticate to ASA. This works fine.Now I want to setup a DAP to verifiy the client against the Microsoft AD using LDAP. I configured LDAP server in ASA see:aaa-server LDAP protocol ldap aaa-server LDAP (inside) host ldap.com ldap-base-dn DC=x,DC=x,DC=x,DC=com ldap-scope subtree ldap-login-password ***** ldap-login-dn ***** server-type microsoft ,I can see that it works if I test the server via the testbotton in ASDM and I see it in CLI "debug ldap 255" also. But if I configure in DAP: AAA Attribute ID:memberOf = DomainMember I can not see any request to the LDAP server during I try to connect with the Client und the DAP doesn't match.
View 2 Replies
View Related
Jan 25, 2012
I'm trying to set up vpn with ASA 8.2(5) and Anyconnect 3.0.4235. The goal is to force user to connect from registered machines only (winXP & win7 x32 and x64). To do this, I used machine certificates issued by own CA. Certificate is installed in machine store. I use double authentication (aaa & certificates). Everything works fine, AnyConnect browses cert store, ASA validating machine certificate, then user is prompted for username/password and finally if all is correct - connection is established.My problem is, that for new installation (new host), AnyConnect fails at first connection attempt. If I use aaa authentication only, connection is established, but if I use aaa & certificates - connection fails. The appropriate .xml profile is predeployed at client host asa well as machine and root certificates.Important: When first try (aaa auth) succeded, others are always OK (with aaa. certificate or aaa & certificate authentication). Only the first one fails.The goal is to succesfuly establish connection with aaa & cert.
With DART i get:
******************************************
Type : Error
Source : acvpnagent
Description : Function: CTransportWinHttp::WinHttpCallback
File: .CTransportWinHttp.cpp
Line: 2150
[code]....
Certificate is valid for sure, and as I mentioned before, if first use aaa only, the second try is OK. At ASA with debug crypto ca 255 can't see any certificate from client.
View 3 Replies
View Related
Jul 7, 2011
Any instructions to configure an ASA to allow authentication by certificate only on an AnyConnect vpn?I'm running an ASA 5505 with 8.4(1) and AnyConnect 2.4.7030 on an Android phone.I currently have the AnyConnect client connecting ok using username / password for authentication.
I have loaded the company root certificate (internally generated) into the ASA "CA Certificates" and generated an Identity Certificate for the ASA.
View 1 Replies
View Related
Jul 13, 2011
want to connect with AnyConnect Secure Mobility Client 3.0.2052 to ASA 5540 Version 8.4 and SSL Premium License.The clients using Maschine Certificate to authenticate to ASA. This works fine.
Now I want to setup a DAP to verifiy the client against the Microsoft AD using LDAP. I configured LDAP server in ASA see: [code]I can see that it works if I test the server via the testbotton in ASDM and I see it in CLI "debug ldap 255" also. But if I configure in DAP: AAA Attribute ID:memberOf = Domain Member I can not see any request to the LDAP server during I try to connect with the Client und the DAP doesn't match.
View 3 Replies
View Related
Aug 26, 2009
Looking to fine tune Cisco IPSec client RA-VPN authentication on our ASA-5510. Currently using NT Domain authentication. It's been working fine for quite a while but is too broad a brush. It authenticates anyone who is in the domain. We need to only authenticate folks who are in a specific AD remote access security group. I'm testing LDAP but am getting the same results. I can get it to authenticate based on overall domain membership but can't seem to figure out how to check group membership.
We've updated to ASA 8.2(1) and ASDM 6.2(1). It seems to have more LDAP functionality but I'm not an LDAP expert. I've posted an image of the LDAP server dialog from the ASDM. I originally tried putting the Group DN in the Base DN field but kept getting a "can't find user" error when testing. I also tried adding the group info in the "LDAP parameters for group search" field at the bottom. But it doesn't seem to be looking there. Note that the current value is the Group Base DN only. I also tried putting "memberOf=" in front of that. Still no luck. The values shown in the image work for simple domain membership.
View 3 Replies
View Related
Nov 6, 2012
I have been successfully able to setup Cisco AnyConnect VPN on ASA 5520 with 8.4 code. I have set it to authenticate against the RADIUS Server (Microsoft Windows 2008 NPS server). I have noticed one thing, on the server under "Constraints and Authentication Method". I picked MS-CHAP-v2, but it is considered Less secure authentication methods. I can click on Add and choose other Authentication methods like Smart Card or other Certificate, PEAP, EAP-MSCHAP v2. I picked PEAP but then the VPN does not work.
So first of all does it really matter if I just leave it to MS-CHAP-v2? Because from my understanding is that AnyConnect will authenticate to ASA and then ASA in the backend talks to the RADIUS server so from a security stand point this scenario shouldn't it be sufficient as no un encrypted or less secure information is available to the outside world? Secondly is there any documentation on using PEAP with Cisco AnyConnect?
View 4 Replies
View Related
Dec 29, 2012
i have 1001 ASR which boots up ok but shows a warning "filesystem is not clean" and thereafter the image is validated well, it shows up the following two messages and just goes idle from there. [code]
View 6 Replies
View Related
May 11, 2011
We do some remote work for our customers and often have to use their VPN in order to connect to their systems. We have had no problem utilizing the Cisco VPN with some of our customers unti recently. We picked up another customer that uses the Sonicwall VPN. If I sign onto the Sonicwall client, sign off, and sign into the Cisco VPN client, at the point that it makes the connection, it completely locks up my users' PCs. It happens to all of them.
I've discovered that from a fresh boot, I can get on and off the Cisco VPN all day, but as soon as I utilize the Sonicwall VPN, and then return to the Cisco VPN, it locks up every time.
All of my machines are Windows 7 and are using the Cisco VPN Client Version 5.0.07.0290.
View 2 Replies
View Related
Jan 18, 2013
I've got a RV220W that for some reason has started acting a bit strange. A couple of times a day the network stops functioning, both wireless and wired. At first I thought this had to do with my newly installed laptop, that it maybe caused some hickup that made the router reboot but even when it's turned off I can still read in the logs of my NAS server (Qnap TS-419P+) that "Lan 1 is down" followed by a "Lan 1 is up" a couple of minutes after.
The things connected to the network by wire is my Macbook Pro (2012), the Qnap and an LG home theater system and the wireless devices are a couple of iPhones and an iPad. The problems started after new years eve and I've been running the latest firmware (1.0.4.17) for a few weeks before that.
View 1 Replies
View Related
Feb 18, 2013
So we have this problem that just started, I can replicate the issue as well, if a user makes a mistake on typing there password after 1 attempt ACS sends 3 to AD locking out the user.
In a putty or secureCRT session after 1 password failed attempt, I am unable to retry with that same session.
The issue seems to be that after 1 bad password attempt, from the client side I am unable to get another try.
View 1 Replies
View Related
Sep 9, 2012
I have the main router, which is SMC SMCD3GN from Rogers in Canada, and I have heard from MANY people that this router REALLY sucks..especially the range. And I myself also had problem with low signal in the 2nd floor of my house, so I purchased the wifi repeater (TP Link) to extend the range. I followed the guide given in the box, and everything was set up flawlessly. However, after a few hours of use, all my devices (laptop, tablet, phone) which are in the same room as the repeater decrease the signal again, to the point where it was before I purchased the repeater. Then if I disconnect the wifi and reconnect, the signal is full again. Sometimes I have to unplug the repeater from the wall and replug in order for it to work.
View 2 Replies
View Related
Dec 7, 2009
I am having issues with my freinds new DIR-825 Rev:B1 Firmware:2.02NA, The admin pages are intermittently slow to load and sometimes wont load until I power cycle the device. I am using IE8 on vista x64, and have the issue on all pc's on the network. Is there a work around for this?
View 7 Replies
View Related
Apr 22, 2012
Just upgraded from the base card to a Intel Centrino 622ANHMW 6200 wireless half mini card. The added speed is great, but the 1750 is locking up frequently. I installed the recommended drivers and install went fine.
View 3 Replies
View Related
