Cisco VPN :: OpenLDAP Group Authentication With ASA5520 RA-VPN
Jul 24, 2011
I've configured RA VPN on ASA5520 with OpenLDAP server authentication. It works fine for all the users existed in LDAP database, but my requirement is I want one particular group to be able to access VPN and not all the users. I have checked most of Cisco documents but all are leading to Microsoft's AD and LDAP attribute map creation. Is there any way to achieve the same thing with OpenLDAP server and not with AD?
View 4 Replies
ADVERTISEMENT
Oct 5, 2010
I'm trying to set up my Cisco ASA 5505 to authenticate against and openldap server. Authenticate with a user's LDAP username and password is working fine.
I've hit Google pretty hard but can't seem to find a simple answer. It seems like RADIUS might be easier for this kind of thing, but I haven't gotten that set up yet and my familiarity with RADIUS is pretty minimal right now.
View 6 Replies
View Related
May 9, 2012
I have a VPN network (in ASA 5520) with two VLAN (999 and 997) and two remote clients (User1 and User2). The VPN connection with both users is correctly connected but I can't make a ping to another computer of the same VPN network, when the VPN network is connected. For eg: When User1 is connected, has the IP: 172.16.1.230, but can't make ping to another connected PC (IP:172.16.1.236). [code]
View 3 Replies
View Related
Oct 21, 2012
I have an ASA5520 with mobile VPN Ipsec.The "splitTunnelAcl" set the group is not working.
View 7 Replies
View Related
Sep 25, 2012
I have configured SSLVPN on a asa5520 with aaa and certificate authentication.Both authentication works fine,but I find the client users can use any others' certificate to authentication,I want to binding the aaa account to user's certificate.everyone must use their own certificate.
View 1 Replies
View Related
Apr 25, 2011
I'm sure it can be done just haven't been able to find it. I'm running ACS 4.2 and have 2 network groups, one is wireless where I have a WLC and the other is the default where vpn users authenticate with their tokens. Is there a way to have the Wireless network group authenticate using AD and the other group use RSA? I can't find the switch or switches I need.
View 1 Replies
View Related
Feb 3, 2011
I am configuring windows nt authentication on asa 5520 firewall for clientless web vpn. is there a way i can specify to only authentication from the specific AD group only using windows nt or other way?
View 1 Replies
View Related
Nov 28, 2011
I can't seem to find any documentation to how to get this working. I'm trying to make it so that only users of a certain AD group are authenticated for my Anyconnect VPN on my ASA 8.2.2
I've found the documentation on how to prevent logins using the msNPAllowDialin attribute, but not how to base it on group membership (memberOf) [code] I need to do any kind of restrictions inside the actual group-policy TESTGROUP ?
View 2 Replies
View Related
Aug 15, 2012
I have to WLC's a 4402 and 5508 in a mobilty group. they are both running 7.0.116.0. They are configured to use Web Authentication. We are having complaints that Users are having to re-authenticate when moving around the office. My theory is they are moving from one WLC to the other and then requiring to re-authenticate.
View 5 Replies
View Related
May 16, 2013
I'm on an ASA 5510 running 8.2(5)41. I have clientless WebVPN configured to authenticate against an RSA RADIUS server, which has users assigned to RADIUS Class attribute 25 to match the group-lock values assigned to each ASA group-policy. This of course is to ensure users can only access the login page's drop-down VPN profiles they are assigned to by the RADIUS server. I have two other ASA 5510s (same code level) using the same RADIUS server with group-lock enabled but for IPSec remote access VPN's, and the group-lock feature works fine.
WebVPN, however, is authenticating any user to any VPN profile without regard to the RADIUS Class attribute 25 they are assigned. If I configure the VPN profiles to authenticate locally and assign group-lock to individual ASA user accounts, group-lock works. As soon as I point it back to the RADIUS server, group-lock does nothing. From the 'debug aaa' below for user 'corpvpnstp', you can see the RADIUS server sends back the attribute 25 values of "ou=stp.Client;" and "ou=stp.ClientDRC;" for this user. The ASA profile this user has attempted to connect to is "EMS-Admin", which should get denied by the ASA. Instead, the ASA successfully authenticates the user.
View 4 Replies
View Related
Dec 13, 2011
In the WLC there are two groups (say A and B). How would I take group B and point it to a RADIUS server for authentication? The server is ping reachable. I have searched but did not see any definitive answer.
View 3 Replies
View Related
Apr 8, 2011
can i have on asa 5510 multiple pools and multiple group authentication for various departments along with restricted access if any
View 3 Replies
View Related
Nov 25, 2012
I had a problem about authentication use AD group member. Below webiside is the way I config on ACS.
[URL]
I'm using ACS 5.1.0.44 and this version has a bug , ACS cannot read AD group. I have to add it manually . After I change the access policy from Internal user to AD1. I can use anyone AD ID to pass authenticaiton. I finished all config from the website had same result.
I checked the access polices -- default device admin -- authorization , the new rules I created had no hit count. How can I make sure that I make a right config ?
View 2 Replies
View Related
Apr 15, 2013
I am deploying ISE with WLC 7.4. I have two SSID(s) running in my network 1. Corporate & 2. Services. I have a domain setup lets say "AD.com" with 4 groups 1. Corporate, 2. Services, 3. Employees, 4. Contractors.Here is an example of the scenario that I want:
AD.com Group : Corporate's User : 1. C_USER1
2. C_USER2
3. C_USER3
4. C_USER4
5. C_USER5
[code]....
Now what I want to do is have 802.1x authentication on my Corporate SSID that will check in AD.com, ONLY AND in ONLY corporate group for authentication. That is only C_USER1 to C_USER5 are allowed to connect to it. Users from any other AD group shouldnt be authenticated on this SSID.The same for the services group & SSID.
View 2 Replies
View Related
Aug 26, 2009
Looking to fine tune Cisco IPSec client RA-VPN authentication on our ASA-5510. Currently using NT Domain authentication. It's been working fine for quite a while but is too broad a brush. It authenticates anyone who is in the domain. We need to only authenticate folks who are in a specific AD remote access security group. I'm testing LDAP but am getting the same results. I can get it to authenticate based on overall domain membership but can't seem to figure out how to check group membership.
We've updated to ASA 8.2(1) and ASDM 6.2(1). It seems to have more LDAP functionality but I'm not an LDAP expert. I've posted an image of the LDAP server dialog from the ASDM. I originally tried putting the Group DN in the Base DN field but kept getting a "can't find user" error when testing. I also tried adding the group info in the "LDAP parameters for group search" field at the bottom. But it doesn't seem to be looking there. Note that the current value is the Group Base DN only. I also tried putting "memberOf=" in front of that. Still no luck. The values shown in the image work for simple domain membership.
View 3 Replies
View Related
Dec 18, 2012
Can I use WLC 5508 with OpenLDAP directly (without radius) ?
View 1 Replies
View Related
Jul 31, 2012
I try to map LDAP Group to ASA Group policy following documentation:
[URL]
This is a config for ASA 8.0. I would have expected it to work on 8.4 as well but I do run into problems. The mapping as shown in LDAP Debug and ASA Log will actually happen but it is overwritten by the "GPnoAccess" Group Policy configured locally in the Tunnel Group. From earlier works with RADIUS I would have expected the user specific Attribute to be "stronger"?
ASA Log:
AAA retrieved user specific group policy (correct Policy) for user = XXX
AAA retrieved default group policy (GPnoAccess) for user = XXX
View 3 Replies
View Related
May 31, 2011
Our firewall expert has gone off on long term illness leave and I am trying to pick up the pieces :-(
We have an ASA 5520 (local office) talking to another ASA (remote office) via a VPN Tunnel.
My 1st problem is that I cannot ping from my inside network (local) to the outside interface of my remote ASA.
My 2nd is that I have debug enabled on my rules but am not logging anything.
View 1 Replies
View Related
May 1, 2012
how to associate an AD group - which i have defined in users and identity stores/external identity stores/Active Directory/Directory attributes to associate with the relevant identity groups - Users and identity stores/identity groups Is there an example of this being done somewhere as i am having problems understanding how to do this from the user guide.All i want to do is associate identity groups with ad groups.
View 3 Replies
View Related
Apr 23, 2012
I have configured SSL-clientless vpn on asa5520(8.2-asdm-6.4)It is working.Only problem is how to add pcs to the vpn.That mean like someone need to access pcs via vpn.Servers with url can add without any problem.is there anyway to add pc/servers with ip addresses?
View 2 Replies
View Related
May 16, 2013
we are trying to configure the vpn with our provider we are on Asa and the use Checkpoint , vpn seem to be established on phase 1 and phase 2 too.bur when i send ping packets seem to los on tunnel and other side do not see them.Asa is after a onother firewall and outside interface of this asa is nated on this perimeter firewall.
View 5 Replies
View Related
Jan 7, 2012
I have been using aes 256 with dh group 2 and pfs group 2 for my site to site vpn tunnels.Now I am considering modifying the dh groups both for p1 and pfs to group 5 or keep it group 2.Is this a must to have dh group 5 with aes 256 or having dh group 2 with aes 256 is also common ?
View 1 Replies
View Related
Oct 10, 2011
I'm trying to use a 5520 to test something but the bandwidth seems pretty low for the product I'm testing over it. Can anyone tell me if there is a bandwidth limitation by default? I'm seeing 1.5mb/s average with spikes to 6mb/s or so. On the ASA5550 I was seeing usage up to 80mb/s.
View 5 Replies
View Related
Feb 17, 2010
I'm trying to setup the SSL VPN portal:When I connect via HTTPS to the ASA5520 outside interface I get the login prompt and after successfully login it takes me directly to the Anyconnect client download (starts Anyconnect immediately) even though in the group policy is configured to not prompt the use to chose the post login and the post login is ste to go to Clientless SSL VPN Portal?
View 7 Replies
View Related
Feb 4, 2009
We have a several SonicWall TZ 190 establishing VPN tunnels with a ASA5520. Pericodically random VPN tunnels will drop and can not re-establish a connection. In order to re-establish the dropped VPN tunnel, our firewall folks manually drop all VPN tunnels connected to the ASA (they use to physically power cycle the ASA). They claim this is the only way to resolve the problem and since the SonicWall Life Time seconds for Phase 1 and 2 are set to 28800, they reset the tunnels every 8 hours. Additionally, they claim that SonicWall IPSEC is different that Cisco IPSEC which is the main problem. Hence they are requesting a SONICWAll VPN concentrator..
View 4 Replies
View Related
Mar 5, 2013
I have a Cisco ASA5520 that we are going to use to allow users to connect to our network via the Anyconnect client, I have authentication set up to validate against AD via LDAP, but was wondering if there were any way to set up the profile to check the PC before they log in....we do not want users using their home PCs to attach to our corporate network, only PCs that were issued to them by the company. Nothing is jumping out at me in the config, we are running some fairly old sofware on the boxes (ASA - v8.2(2), Anyconnect - v2.5.3046) I plan on upgrading the Anyconnect to v3.1 but will probably need to keep running the 8.2(2) version on the ASA due to support issues.
View 2 Replies
View Related
Sep 25, 2011
I have a asa5520 with five Internet IP.One for the internet interface and the others are static maped to dmz hosts. It runs rightly until yesterday.Now it will lose the connection to the gateway many times everyday and the dmz hosts can not connect to internet any time. configuration(simplified):
!
interface GigabitEthernet0/0
nameif internet
security-level 0
[Code]....
I called ISP to check,when ISP clear their router's ARP, the asa will lose the connection at the same time and then the ISP's router couldn't learn the ASA's MAC. After I 'clear arp' manually,The ISP's router can learn the ASA's MAC and the connection recovered,but the DMZ's cann't access internet still (of course,There is no problem between DMZ and ASA ,I ping the internet gateway from DMZ host and can not get any reply.).
View 2 Replies
View Related
Feb 17, 2011
I have a location where I have 2 WAN links, but without a dynamic routing protocol in between. I want to implement a kind of hub to 2 spokes VPN. But the spokes will actualy be on one single ASA firewall, each spoke on a different interface. One hub-spoke will be primary, the other one the secondary. When the WAN link for the primary VPN fails the secondary should be started on the hub to the other spoke.
View 1 Replies
View Related
Oct 3, 2011
We have 2 x ASA5520 and I upgraded this to 8.2.2 last year, I see 8.2.5 and now 8.4 is out. If we are having no issues, is it best just to leave it as it is? I can see a couple of features I may find useful in 8.2.5, but 8.4 seems like a huge jump and a risky one too.
View 1 Replies
View Related
Aug 10, 2010
I have a problem with RME 4.2 from CWLMS 3.1. I have configured SSH in my asa 5520 device but RME can't get the configuration file. I ran a job to sync archive but i get this message error:
*** Device Details for ASA_5520_VOZ_01 *** Protocol ==> Unknown / Not Applicable Selected Protocols with order ==> Telnet,TFTP,SSH Execution Result: CM0062 Polling ASA_5520_VOZ_01 for changes to configuration. CM00 Polling not supported on
[Code].....
View 2 Replies
View Related
May 8, 2011
I have one firewall ASA5520, are very slow
View 3 Replies
View Related
Feb 1, 2012
I have a cisco 3750 switch connected to the ASA5520 which is connected to the internet
LAN ----> Catalyst -----> ASA5520 ------> INTERNET
10.1.4.0 ---10.0.0.1 ----10.0.0.2 ------- 203.98.227.3
On my switch I have VLANs configured. From the 10.1.4.0 network, I'm able to ping switch gateway. I can ping insde of ASA .. See my ASA config below. I have allowed http and dns traffic outside but cannot browse internet from the 10.1.4.0 network.
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.98.227.254 255.255.255.0
!
interface GigabitEthernet0/1
[code]....
View 9 Replies
View Related
Mar 7, 2011
I am trying to introduce an ASA5520 to my network based on the following diagram: ISP Internet ------> ASA5520 ------- > Cisco Router ------> LAN. The problem is I cannot ping the ASA from the LAN. I can ping it from inside the router. I already allow ICMP within ASA. If i remove the cisco router and replace it by a swich, I can ping the ASA with NO problem.
View 5 Replies
View Related
