Cisco WAN :: ASA5520 Not Connecting To Internet?
Feb 1, 2012
I have a cisco 3750 switch connected to the ASA5520 which is connected to the internet
LAN ----> Catalyst -----> ASA5520 ------> INTERNET
10.1.4.0 ---10.0.0.1 ----10.0.0.2 ------- 203.98.227.3
On my switch I have VLANs configured. From the 10.1.4.0 network, I'm able to ping switch gateway. I can ping insde of ASA .. See my ASA config below. I have allowed http and dns traffic outside but cannot browse internet from the 10.1.4.0 network.
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.98.227.254 255.255.255.0
!
interface GigabitEthernet0/1
[code]....
View 9 Replies
ADVERTISEMENT
May 19, 2013
My users are using AnyConnect to make a remote access VPN connections to the corporate office thru an ASA5520. At this time, VPN users have very limited privileges because we allow users to connect using their home computers and RSA tokens.
I need to find a way to determine whether an AnyConnect client is connecting from a company-owned/maintained/patched laptop or some other device. I would like to give full network access to the company laptops while continuing to restrict access to the home machines. So far, the only idea I have is to use DHCP and associate the MAC addresses of the company laptops with addresses is a privielged subnet range.
View 2 Replies
View Related
Jan 15, 2013
i have configured remote access VPN to cisco ASA 5520, Cisco vpn client is connecting fine and both phases are coming up but ipsec phase packets are not encapsulating. and ima not able reach the remote subnets 192.168.10.0 and 192.168.180.0. [code]
View 4 Replies
View Related
May 31, 2011
Our firewall expert has gone off on long term illness leave and I am trying to pick up the pieces :-(
We have an ASA 5520 (local office) talking to another ASA (remote office) via a VPN Tunnel.
My 1st problem is that I cannot ping from my inside network (local) to the outside interface of my remote ASA.
My 2nd is that I have debug enabled on my rules but am not logging anything.
View 1 Replies
View Related
Sep 25, 2011
I have a asa5520 with five Internet IP.One for the internet interface and the others are static maped to dmz hosts. It runs rightly until yesterday.Now it will lose the connection to the gateway many times everyday and the dmz hosts can not connect to internet any time. configuration(simplified):
!
interface GigabitEthernet0/0
nameif internet
security-level 0
[Code]....
I called ISP to check,when ISP clear their router's ARP, the asa will lose the connection at the same time and then the ISP's router couldn't learn the ASA's MAC. After I 'clear arp' manually,The ISP's router can learn the ASA's MAC and the connection recovered,but the DMZ's cann't access internet still (of course,There is no problem between DMZ and ASA ,I ping the internet gateway from DMZ host and can not get any reply.).
View 2 Replies
View Related
Jan 8, 2013
A lot of times our users will have a bad connection from where they are connecting in from. Their Internet connection will drop and the VPN Client disconnects but on our Cisco ASA5520, the connection will still be connected and when their Internet connections comes back, they are not able to connect as the session is still up on the 5520. Is there a way to make the connection clear quicker? I have IKE Keepalives on the RA Profile (Confidence 300 seconds, Retry Interval 2 seconds) but it seems to keep the session longer than that. Is there anything I can do to make the connection clear quicker?
View 2 Replies
View Related
Nov 10, 2012
I recently deployed this module on Cisco ASA 5520 (v8.2.5) at a client's place. I'm having problems. Even if there's 1 user, browsing Internet is super slow. If I were to bypass the CSC SSM (for 10 users) module by removing the "service-policy TEST interface inside" command, browsing Internet is very fast. Based on my troubleshooting, if I were to disable Web Filtering, Web Reputation and URL Blocking & Filtering, and leave all other services enabled, then the browsing is fast. how come I enable the 3 services stated above and browsing the Internet is slow, even for 1 LAN user. I don't have any thing configured under these 3 services. Just by enabling the services alone, it's already slow. It doesn't make sense for Cisco to sell such an expensive product and it can't even handle 1 user with no settings but services enabled.
View 5 Replies
View Related
Jun 8, 2011
I have installed CSC-SSM-10 on cisco ASA 5520.I am facing two problems
1 : When I send traffic from ASA to SSM module then internet connection becomes slow and sometimes internet session disconnected.
2. When I try to manual update then following erros shows please see attachment .
View 6 Replies
View Related
Oct 27, 2012
when i try to log on to google chrom...it states not connect to the network...at thr bottom of the computer it say noy connected connection avaiable
View 1 Replies
View Related
Nov 12, 2012
i have the network key and its connecting to the network but wen i try go onto the internet it comes up cannot display website or somthing likt that..it came up sumthin about .netframework aswell i don rele ave a clue wat to do next.
View 1 Replies
View Related
Mar 3, 2011
When I got my Actiontec GT704WGB router/modem(It's one of those ones that doubles as a router/modem.) My ISP is Verizon. I have McAfee is my anti-virus. Every time I try to connect it says "A connection error has occurred: The connection point has timed out." I use channel 11, have a 64 byte encrypted WEP key. Yesterday I found a neighbors connection, connected just fine, and it had a signal strength of about 40%. Why on earth can't I connect to my ONE HUNDRED PERCENT CONNECTION BUT I CAN CONNECT TO A FORTY PERCENT CONNECTION.EVERYTHING can connect to my router EXCEPT my PSP. [code]
View 7 Replies
View Related
Apr 27, 2012
dell desktop Inspiron 546 is not connecting to the Internet. I can connect from my wireless devices. Background info: using Verizon Fios with a Actiontec M1424WR modem and a Netgear N 750 wireless dual band router.
View 15 Replies
View Related
Sep 3, 2011
We have 2 PCs connected to a ADSL modem router (which has 4 ports) to share files and internet connection. Unfortunately there is no IP address assigned to both the PCs. When i tried to assign the PC it gets disconnected from Internet.The problem is : i want to access the PCs through internet from a Laptop. When I ping the Public IP of that lan network, it works. But when i use the Remote Desktop to connect to the PC or when i use the DOS command NET USE x: \IPaddressharename /USER:username password - It doesn't work. In DOS prompt error 1231 or Network path not found error occurs.I followed the instruction to configure Remote Access like disabling firewall, no installation of any firewall software, My computer -> properties -> remote -> allow users to connect remotely this computer.
View 2 Replies
View Related
Sep 1, 2012
I have a Dell Latitude 520 with a netgear wireless router. I am showing a very good signal and that I am connected yet I can not use the internet.
View 14 Replies
View Related
Oct 29, 2011
After installing a new windows update, none of my browsers will connect to the internet. Not IE, not Chrome, nor newly installed firefox. Strangely enough, I can use MSN and Skype, but Steam won't connect.I've tried to system restore just to the point before I installed the update, but it failed. Windows blamed it on an anti-virus program. Turned it off, and system restore still won't work. Uninstalled the new updates, but nothing has changed.
View 2 Replies
View Related
Jan 19, 2011
im using a 3 broadband dongle can i get my desktop to be wireless with a usb wifi adapter so i can connect my nintendo wii, if so how do i go about it?
View 2 Replies
View Related
Jan 5, 2011
Looking it up and doing all sorts of things to attempt to resolve it but so far I've had no luck. Programs such as World of Warcraft Downloader, iTunes, Spybot S&D Updater are unable to connect to the internet, saying there is no connection or that they are unable to initialize streaming. Other programs such as Mozilla, Z/CMUD, Malaware Bytes Updater all can connect without any sort of problem. I've got Microsoft Security Suite on my computer as well as a number of other antimalware programs, running them pretty religiously
View 4 Replies
View Related
Apr 11, 2012
about 7 pcs on the network all using Windows 7 32bit. Switch - Router all wired
They are all connected to the network fine but one of them gets cut off from the internet sometimes and starts back up randomly. I changed to different ports on the switch same issue I didnt have the time to fully check it but Im gonna go back tomorrow my best guess is that its the wire but any other possibilities that may cause this I would like to know before I go if at all possible.
View 1 Replies
View Related
Jan 18, 2011
I recently had to completely gut my computer and start from scratch, reinstalling windows xp, and all hardware. I only have a basic knowledge of computers, and their inner workings. I had my modem connected to my computer via ethernet, and i enjoyed fast browsing. Since the rebuild, i can only use the usb (and it's sloooooow!). I have learnt all i know about drivers because of this issue.
View 19 Replies
View Related
Oct 18, 2011
I have a DELL Desktop, and Window Vista Home Premium. My internet disconnects alone daily or 2 time daily, and I need to restart the computer to connect it again. I try to disability my Norton Security Suite, Diagnose and repair the Network, The 2 Network Adapters (Power Manager) are disables (the wireless, and the wire adapters)
View 12 Replies
View Related
Dec 28, 2011
I just bought a d link extreme n wireless router and I tried to install it with a Mac book pro so we could not use the setup disc and when we tried to use the 192 168 0 1 in the URL and used the set up automatically and th Internet light on the router was not blinking and the internet was not working
View 1 Replies
View Related
Jul 2, 2012
I've recently bought a new computer with a wireless card. However, the wireless signal is terrible, so I'm looking to try and get my PC plugged directly into my rooter (or by other means).
Do I have any other options of doing this, other than a wire from my rooter to my PC. Is there any other solution which enables me not have to plug into my rooter directly?? (as my rooter is in an awkward spot and has to stay there). Can I plug into an ADSL port for example? Or any other alternatives???
I'm a bit of a newbie when it comes to anything to do with networks, internet access, LAN etc etc.
View 1 Replies
View Related
Apr 30, 2012
connect my phone to internet.HOw can I connect it to internet?
View 1 Replies
View Related
Jan 18, 2012
I have an old laptop with an old wireless adapter that doesn't support WPA2. I have another laptop that does and is connect to a router. Can I hook up the old one directly to the new one to get on the internet (I want to use both computers at the same time) without connecting the old one directly to the router (because it is in another room)?
View 3 Replies
View Related
Jun 7, 2012
I have my friend's older computer here that's still running Windows 98 and it won't connect wirelessly to my home internet. It's been so long since I've dealt with 98 that I barely remember how to navigate the system so there isn't much I was able to do in trying to fix the problem myself.It's an HP compaq tc 4200, it's connected to my home internet before so all the information for the connection is there, it simply refuses to cooperate all of a sudden.
View 1 Replies
View Related
Mar 27, 2011
I have the 2wire Gateway modem to connect to the internet on my HP all-in-one desktop computer, which I bought a little over 3 years ago. Occasionally, the computer will show that the internet is disconnected, however the modem will have all it's lights flashing. After attempting several times to get to connect again, I called the support number, and they told me that I would either have to the ethernet cord hooked to the computer or purchase a network adapter. BUT my computer already had a network adapter installed in it before I even bought it, so I don't feel that I need to purchase one and I was able to get it to connect to the internet wireless by myself after hanging up. My question is how to keep my computer from wanting to disconnect from the wireless internet?
View 2 Replies
View Related
Sep 27, 2011
Recently my Sony TV has stopped connecting to the internet. I am using a wired connection with homeplugs.
[code]....
View 14 Replies
View Related
Jun 26, 2012
How, if possible, do i connect one pc( running on xp) via lan to another pc' internet.(on win7)I can't take off the IP cause my accounting program needs it.
View 7 Replies
View Related
May 28, 2011
the internet is on but thesmile box is not connebting to the internet
View 2 Replies
View Related
Aug 26, 2012
My wireless isn't connecting to internet
View 1 Replies
View Related
Sep 20, 2012
my system not connect with internet cable
View 1 Replies
View Related
Aug 20, 2012
I realize there are a ton of posts with this same title. I've tried them all! My computer tells me I'm connected to my D link router but says "no internet access". I have other devices (computers, phones, ipads) that are connecting via the wireless router just fine. Furthermore, when I connect the ethernet cable directly to the computer it still does not connect to the internet. I've reset everything with no luck. I'm running windows 7. Everything is set to obtain IP address automatically.
[code]....
View 1 Replies
View Related
Jan 30, 2011
I've been testing it out at home where I use another D-Link with no problem. What I'm seeing is that I can connect to the router (wired or wireless) but no internet connection is reported. I believe I have also tried pinging a web site by IP address alone with no luck.
ISP: Version DSL
Router: DIR-615,
Hardware version B2
Firmware version: 2.20
I've tried turning modem and router off, waiting a few minutes, then turning on modem and letting it connect then turning on the router. That doesn't work. As best I can tell the two routers have the same settings. The ISP is using Dynamic IP (DHCP) connection.
View 7 Replies
View Related
