PC On Network Not Connecting To Internet?
Apr 11, 2012
about 7 pcs on the network all using Windows 7 32bit. Switch - Router all wired
They are all connected to the network fine but one of them gets cut off from the internet sometimes and starts back up randomly. I changed to different ports on the switch same issue I didnt have the time to fully check it but Im gonna go back tomorrow my best guess is that its the wire but any other possibilities that may cause this I would like to know before I go if at all possible.
View 1 Replies
ADVERTISEMENT
Jun 2, 2011
I have a Airtel Internet Broadband connection and I have a lan having around 10 workstations. I have another computer which I want to use as a server through which all the internet traffic will pass. The server has two lan cards(one on motherboard and other one is usb).I have connected broadband modem to lancard1(on motherboard) and have connected the lancard2(usb) to the lan switch.Now how to proceed further, so that internet service is available on all the workstations connected to the lan switch.
View 13 Replies
View Related
Apr 9, 2012
I have a hp pavilion dv7. Its running windows vista it will connect to my wireless network but not the Internet. I have many other wireless devices that connect fine (xbox 360, 2 iPod touchs, and another laptop). It will connect fine at my in-laws and my buddy's house. I don't know if this means anything but I set up the network on the HP. It worked fine hooked up throu an Ethernet cord. I know it's not the modem or router. In my network center it will identify the network and show it's connected but in the manage wireless networks window it says it's connected to an unidentified network. The router is a belkin.
View 2 Replies
View Related
Mar 25, 2011
I am still not able to get internet access through my network switch. Where I want to have the switch, I have a TV (with LAN port), PS3, a network capable hard drive, and a iMac. I want to be able to connect the switch to the ethernet jack on the wall and then connect the components to the switch. So here is a map of what I want to do:Actiontech Router (FIOS standard) ---> LAN port on the wall ----->D-Link DGS-1005G switch---->PS3,hard drive, iMac, TV.When I try this setup, everything looks fine, but I do not have internet access. When I connect directly to the wall jack, I always get internet connection. I have tried two different switches, but still no avail.I have tried assigning static IPs to each of the systems, but have had no luck in getting them to connect. The LAN jack is wired directly into the actiontech router. The range on the router is 192.168.1.10-192.168.1.256 (192.168.1.2 is a dd-wrt range extender).
View 7 Replies
View Related
Dec 18, 2011
Just recently I have one of my computers connected to my router not able to access internet, while all the other ones can. I have a wireless and 2 LAN connection to my router 1 computer from the LAN connection works but I'm having trouble with the other one.When I connect my cable from the modem directly to the my computer internet works fine.I tried resetting Winsock didn't work. Tried changing my cable didn't work. Scanned for any viruses or malware none detected. Also I can ping my router with no problem, but when it comes to pinging google.com or any other website I get the message timed out and get 100% loss. [code]
View 19 Replies
View Related
Dec 12, 2011
I have 3 internet line. How to connect it to a single network.
View 1 Replies
View Related
Jul 17, 2012
I have computers A-E in my house connected to the Bright house supplied neatgear cable modem. Computers C,D and E will connect via DHCP. computers A and B have dual NIC's. (10/100 nic A, 1000 nic B). Heres what i would like to do: connect all computers (A-E) to the internet. (this part i am currently doing) on computer A and B i want to create an ad hoc net work to souly use the 1000M nics (for data sharing). I want to separate computer A and B so they wont use the 100 Mbit connection.
View 1 Replies
View Related
Apr 9, 2011
Just got an HDTV, has a load of fancy internet stuff, but only has a wired connection and I can't put my router in this room, and would rather not have to run a wire up from downstairs.
I'm guessing there is a way of connecting to the wireless on my laptop in this room, connect the laptop to the tv via an ethernet cabe, and bridge the connections or something so that my tv gets the internet from the laptop. That's gotta be possible, no? When I try it tho, the connections bridge, but the tv says "Gateway is not connected, gateway address wrong or unavailable". Using auto IP.
View 8 Replies
View Related
Mar 19, 2012
I have 24 port switch which is already connected to internet through static IP. Now I want to use a router as a wireless device to use internet. How do I connect router to switch?
View 3 Replies
View Related
Nov 4, 2012
I am a ADSL user and connect to internet using bridge mode that is set in my ADSL modem/router. when I open My Computer in Windows 7 I see a list of other people in my Network section as shown below. Other problem is that when I want to go to my modem web panel by entering 192.168.1.1 in my browser, I see it tries to connect to other modems and if I enter default user/pass I can log into other peoples modem! Is that my ISP fault for misconfiguration?
View 12 Replies
View Related
Feb 13, 2011
I am having internet connected to my Desktop with Win XP. Internet mode is Wireless Data Card that can be inserted into USB port. Now I have a laptop with Windows Vista Home Premium. I was able to connect both of them using ethernet cross over cable and successfully enabled file sharing through Local Area Network. But I want to access Internet from the laptop. Is it possible?
FYI, when I typed ipconfig in cmd prompt in desktop,
PPP adapter High Speed Data:
Connection-specific DNS Suffix . :
[Code].....
View 2 Replies
View Related
Aug 18, 2012
I have a dell desktop that uses Windows XP. Today I was cleaning out some unwanted programs that I never use and just take up space. But I don't know if I deleted something that I shouldn't have, or what happened but I am now unable to use my wireless internet. It says that a "network cable is unplugged". I have checked my modem and it is working fine. My brother is receiving internet in is laptop.
View 3 Replies
View Related
Jun 23, 2011
[code] Started laptop and couldn't connect to wireless network, which used to work. I tried "netsh..reset.log" , "netsh.." , Repairing the network connection but still not working.
View 8 Replies
View Related
Feb 9, 2011
I am connecting my laptop to a wireless connection I am at connect to network. and enter network security key. do not know the security key
View 2 Replies
View Related
Jun 2, 2011
I have a Airtel Internet Broadband connection and I have a lan having around 10 workstations. I have another computer which I want to use as a server through which all the internet traffic will pass. The server has two lan cards(one on motherboard and other one is usb).I have connected broadband modem to lancard1(on motherboard) and have connected the lancard2(usb) to the lan switch.Now how to proceed further, so that internet service is available on all the workstations connected to the lan switch.
View 4 Replies
View Related
Feb 20, 2012
I am trying to connect my iPod touch to the internet. We have a home wifi network, but it keeps saying i wasn't able to join the network.
View 1 Replies
View Related
Mar 7, 2013
I have a Linksys X5000 hooked up with my home pc. The internet I get is free though the private school's network I work at (across the street) through a LAN. With a bit of wrestling I got my desktop to connect with the internet through the Linksys like an ethernet switch.I can't get my wireless devices to connect with the internet without logging in as a guest, which is annoying to do every time, especially through my iPod. They will gain access to my network, but not the internet.
Since this is a school network, my IT guy gave me a static IP address to speed up up/downloads by disabling DHCP. Every time I try to do that I get a message that "the page at 192.168.1.1 says the value can't be equal." OK, so I try to change my router's IP to 192.168.1.2 and...no luck, same message. I love working with hardware, but networking is beyond me. I don't think I can log into the guest screen in my own house any more! I am getting a new tablet in 2 days and this just won't do.
View 1 Replies
View Related
Apr 17, 2011
Connecting PS3 to Playon in a difficult structured network?
View 1 Replies
View Related
Jul 1, 2012
I'm running into an issue with allowing all the PCs to use the one printer connected to devpc. I have a westell 7500 from CenturyLink and a Belkin Wireless G router. This is the layout:
View 6 Replies
View Related
Feb 15, 2013
Is there any way to disable router devices from connecting to your network? For example I want people to connect ethernet cables to their laptops, ps3s, pcs, etc but not to routers. How would one go about doing that?
View 1 Replies
View Related
Apr 9, 2013
I split my network into 2 to make it more accessible during peak time and to minimize internet traffic. However by doing this only the first network can access our Network Access Storage, the other network can access it because the two are separated by different router and switch also the supervisor need to see both network at the same time for monitoring purposes..
View 6 Replies
View Related
Oct 27, 2012
when i try to log on to google chrom...it states not connect to the network...at thr bottom of the computer it say noy connected connection avaiable
View 1 Replies
View Related
Nov 12, 2012
i have the network key and its connecting to the network but wen i try go onto the internet it comes up cannot display website or somthing likt that..it came up sumthin about .netframework aswell i don rele ave a clue wat to do next.
View 1 Replies
View Related
Mar 3, 2011
When I got my Actiontec GT704WGB router/modem(It's one of those ones that doubles as a router/modem.) My ISP is Verizon. I have McAfee is my anti-virus. Every time I try to connect it says "A connection error has occurred: The connection point has timed out." I use channel 11, have a 64 byte encrypted WEP key. Yesterday I found a neighbors connection, connected just fine, and it had a signal strength of about 40%. Why on earth can't I connect to my ONE HUNDRED PERCENT CONNECTION BUT I CAN CONNECT TO A FORTY PERCENT CONNECTION.EVERYTHING can connect to my router EXCEPT my PSP. [code]
View 7 Replies
View Related
Jan 23, 2013
We have a Verizon T1 line providing internet for our backoffice network. On this network, we have 4 network printers that are shared between the facility. We recently opted to go with new web based software that neccesitates a high speed internet connection, and 12 wireless devices across the building. We signed a contract with Comcast Business Class internet, so that in the event of an external failure with one ISP, we would have the other offer redundancy with the new wireless router.It has now become clear that our nurses that are on the Comcast wireless network, now need to print from their wireless devices regularly. At the time this is obviously not possible, because the network printers are only on our backoffice network. Buying a wireless inkjet printer is out of the question. How can I make this happen? All of the printers have a local static IP on our backoffice network (Verizon). I have heard of software that will essentially send the print job to another computer, which would relay the print job to the designated printer.
View 1 Replies
View Related
Jun 8, 2012
When I'm at my friends house I am unable to connect to his wifi network. He uses a Actiontec router M1424WR. His internet service is through Verion Fios. I have connected with other equip such as a tablet but I'm unable to connect with my laptop. I have a Toshiba Satelite C675.
View 4 Replies
View Related
Sep 14, 2011
So I just got a wireless presentation gateway wpg 120 to connect to projector wirelessly. For me to connect to the projector i need to set wireless network to its wireless connection. But if I connect to wpg 120's connection, there is no internet access.Is there any way I can connect to two wireless network or use wpg 120 to connect to internet using it's connection.
View 3 Replies
View Related
Mar 2, 2011
im purchasing a new laptop i want to be able to use it wireless from the router but also i want it to be wired to the router so do i just need a basic ethernet cable for that?
View 10 Replies
View Related
Apr 25, 2011
Recently the home wireless network was upgraded to 802.11n with WPA2-PSK security. There are currently 3 laptops successfully connected and running the internet.
I have a desktop computer that recently had the NIC card upgraded because beforehand no connections were being recognised. Now there are connections being recognised but when I go to connect to the home network (Which has full signal) it begins to connect, it says "Waiting for Network" then after 2 or 3 minutes it just stops, no error message or anything. Ive also tried moving the tower closer to the router but this also does not work, it begins to connect to the network and then stops and says "Unable to connect to wireless network".
Another thing that might be of use, I am unable to access "ipconfig" in the terminal, I type "ipconfig" in run, then the terminal will pop up and close instantly.
View 10 Replies
View Related
May 12, 2012
Is there a way to connect a Non-NAS external HD to a network? My router does not have a USB connection.I wanted to share a 2TB external drive with the laptops in my home.
View 1 Replies
View Related
Feb 12, 2012
I do not want to connect remotely to a desktop (thats where all of my research keeps directing me to). I just want a device to be part of a network, without actually being there. Is this possible?For some context, heres what I am trying to do: I have a microchip (Arduino) which is connected to a laptop, which is not in range of the wireless network, but its connected to a 4g mobile network. There is an iPhone app called TouchOSC which can communicate wirelessly with this microchip, but only if it is connected to the same wireless network.
View 3 Replies
View Related
Jan 25, 2011
i have 2 network, each has its own internet connection. it is on my netcafe, 1st is for browsing and 2nd for online gaming. How do i connect them 2 my pc billing server.
View 4 Replies
View Related
Jul 13, 2012
I have; iMac connected to Netgear DG834G router with ethernet cable and epson RX620 printer connected with USB cable/ Laptop running windows XP Media edition which connects ok to network and printer works ok too.Now have new HP desktop running Windows 7 64-bit. I have tried installing vista driver for printer, as per epson site,but I cannot get the printer to work wirelessly over the network.
View 3 Replies
View Related
