Connecting To Router But Not Internet
Aug 20, 2012
I realize there are a ton of posts with this same title. I've tried them all! My computer tells me I'm connected to my D link router but says "no internet access". I have other devices (computers, phones, ipads) that are connecting via the wireless router just fine. Furthermore, when I connect the ethernet cable directly to the computer it still does not connect to the internet. I've reset everything with no luck. I'm running windows 7. Everything is set to obtain IP address automatically.
[code]....
View 1 Replies
ADVERTISEMENT
Dec 28, 2011
I just bought a d link extreme n wireless router and I tried to install it with a Mac book pro so we could not use the setup disc and when we tried to use the 192 168 0 1 in the URL and used the set up automatically and th Internet light on the router was not blinking and the internet was not working
View 1 Replies
View Related
Aug 25, 2012
I recently set up a router to have wireless internet at my house, and I've been experiencing very slow internet speeds. My internet specs are below:
ISP: Comcast
Plan: BlastPlus, which supposedly gives speeds of up to 40 mbps
Modem: Ubee D3.0
Router: Cisco/Linksys E1200
Before we got the router we used a wired connection which could only have one person connected at a time. That connection was a good speed, though I don't know exactly how fast. It never gave us any trouble. Now that we connected our router, we can't even stream youtube videos or anything. Emails take a long time to open, and navigating web pages in general is very slow.
View 14 Replies
View Related
May 16, 2012
i ahve a dlink dir 615 B2 router and it wont connect to the internet. on day it was fine and working, the next day the internet led wouldn't change from the red light to the green light.i have tried resetting it about 60 times, while the laptop was on/off, while it was plugged it, while it was without power, while the internet cable was in, while it wasn't, while it was shut down and i reset it and the i pluged it in while resetting it...i dont know what else to do!! short of smashing the bejesus out of it. The internet works fine when i connect the cable directly to the laptop, I don;t have a cable modem or anything, just a plain old cable from the street to my house.
View 3 Replies
View Related
Dec 18, 2011
I was giving a RHO 7" notebookbook that was bought in korea, but I can,t seem to get it to connect to the internet, i have a wireless router from att that i use on my toshiba laptop and other devices such as psp and i don't have a problem connecting them although the wireless signal is being picked up i can't seem to connect with the notebook
View 1 Replies
View Related
Sep 14, 2011
I am having trouble connecting to the internet using my linksys router. I can connect to the internet when directly connected, however when i attempt to go wireless i can only connect to the router, not the internet[CODE]
View 1 Replies
View Related
Aug 29, 2012
My client has a ~6 year old dell xps which up until about two weeks ago connected to the internet fine with a netgear usb wireless adapter (it is a desktop). When that stopped working, she ordered a Rosewill RNX-N300X (my suggestion) and I installed it.I got the driver installed and everything, it connects to the router without a problem. Her laptop also connects wirelessly to the router just fine and can browse the web without a problem. The desktop however, even when connected to the router, refuses to access the internet. I was thinking the problem was DNS related because I can ping any ip address in cmd, but can't ping actual websites like [url]... or [url]... The problem is, when I manually change the dns servers in the wireless connection properties, it disables dhcp and will not connect to the internet.Here are the ipconfig /all results for the laptop which works:
SpoilerWireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6200 AGN
Physical Address. . . . . . . . . : 00-23-14-CD-4A-34
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::e4e2:19e 2ae:c4cc%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.11(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, August 28, 2012 9:22:17 PM
Lease Expires . . . . . . . . . . : Wednesday, August 29, 2012 9:28:23 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 234890004
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-A5-05-53-88-AE-1D-44-47-C
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
View 6 Replies
View Related
Jan 1, 2013
Every time I connect my router, I can't use the internet browsers. But I can see there's a internet connection. Bu once in a while even with just a modem connected to my computer I can't use the browsers. The signal from the router to my Xbox 360 works but sometimes it says there's DNS Error or IP Address Error causing my Nat to be strict. Once in a while, I can access my router's page when it's connected. [code]
View 19 Replies
View Related
Oct 7, 2012
Bought a new ASUS RT-N65R the other day, tried following all the steps to hook it up and get my home network going but to no avail. None of the PCs on the network were able to connect to the internet. Tried switching back to my old router, a NETGEAR N300, and it no longer connects. Was working fine until I tried swapping to the new router. When connected to the ASUS router, ipconfig shows my IP address as 169x instead of the 192.168.x.x like it should be. PC connects to the internet just fine when plugged directly into the cable modem, a Cisco DPC3010.
View 6 Replies
View Related
Sep 1, 2012
I have recently bought a Belkin N300 Wireless N Modem-Router and am unable to connect it to the internet. My laptop registers the router but the router won't connect to the internet. The router also is blinking a red light.
View 2 Replies
View Related
Oct 9, 2011
i have an old Netgear MR 314 router that works like a charm for my wired connections, but whenever i try to connect wirelessly from my phone or laptop, it connects but doesn't access the internet.
View 5 Replies
View Related
Mar 31, 2011
I have att dsl and they supplied me with a modem, a motorola model type 2210, and my belkin surf N300 router is giving me issues connecting to the internet. Im pretty sure my wireless network adapter is a netgear wg311v3.The issue im having is that sometimes i can connect to the internet just fine, and sometimes i cant connect to the internet. I know it is a router issue because when i plug the modem into my comp, i can access the internet 100% fine.I also think it is not a wireless network adapter issue because i ran an ethernet cable from the router to my comp and had the same issues. There are 2 other computers on the network, one of them is a year or two newer than my dell desktop, and has no issues whatsoever connecting to the internet via the router. The other computer on the network is a Wii, and has connection issues when playing online (probly a different issue), but can access the internet no problem.
View 1 Replies
View Related
Oct 13, 2011
My laptop will not connect to the internet. We are using a wireless router and have never had a problem before, it works if you plug the ethernet into it but otherwise it says no network available.
View 4 Replies
View Related
Jun 23, 2011
A few days ago i bought this router Sweex LW310v2 and when i connect it to the internet,i found that some sites i can open and some sites i can't open. For example, i can open [URL] but i can't open [URL].. My connection to the internet is trough PPPoE and when i am connected directly to the internet i don't have this problem, the problem appears only when i am connected to internet trough the router. Moreover, programs like Yahoo Messenger and Skype can connect to internet trough the router, the problem is only with the sites. These two sites i use are just an example, most of the sites i can't open.
View 1 Replies
View Related
Oct 19, 2012
I have a sony vaio vpceb1e0e running on windows 7, it connects perfectly to sky broadband but I have issues connecting through BT internet, the computer will connect to the router but cannot get internet access. [code]
View 7 Replies
View Related
Dec 21, 2011
Background: This weekend, I lost my internet connection at home. I called my ISP and they sent someone over. The guy rewired the entire house (our ISP is also our tv cable provider), because he felt that our signal was probably weak due to the wiring. Long story short, after two hours of rewiring and fixing the cable outside out house (chewed through by a squirrel), he said the modem's signal was back to normal and left.
When I plugged the router; however, it refused to hold the internet connection for more than a few seconds. On the front panel, the planet-shaped light turned orange, then blue (for a few seconds) and then turned off entirely. I tried another few times and got the same result. At best, it stayed connected for a minute, until I rebooted my computer. The laptops in our house do read the presence of the router, so it's safe to assume that the problem lies with the router's capacity to receive the signal.
View 5 Replies
View Related
Apr 30, 2011
AOL are a complete waste of time and space in my opinion as for one you cannot understand what there tech support is saying and even when you email there tech support they seem to answer with a totally different answer to my questions.I have just installed a pci card ethernet connection on my pc windows xp now all I want to now do is connect and configure my router on the internet, I currently use aol dial.bb broadband adsl connection so far there are no connections from the router connected to my pc as i am still using a bt voyager 105 modem.When i did connect the ethernet cable to my pc and into the router also i connected the adsl cable into the back of the router but aol have not explained how to connect to the internet to configure this router and get it to work.
View 2 Replies
View Related
Mar 19, 2012
I have 24 port switch which is already connected to internet through static IP. Now I want to use a router as a wireless device to use internet. How do I connect router to switch?
View 3 Replies
View Related
Aug 9, 2012
I want to buy a wireless router to which I can connect my USB internet device directly, so I don't have to turn on my PC all the time if I just want to use my moble phone or iPOD or other family members wanting to connect to internet.
View 1 Replies
View Related
Aug 8, 2011
My Linksys WRT160N wireless router stopped working all of the sudden. When I connect to the internet wirelessly my laptops say I have full signal but "No Internet Access." None of the 4 wired ports on the back of the WRT160N router give me wired internet. The only way I can get internet is to connect the wire to my internet modem
View 5 Replies
View Related
Mar 26, 2012
I have an E2000 (2 yrs old) that is not connecting to the internet.It is a slave to a BEFSR81 which controls the DNS.I am able to connect to other computers on my home network, so I know the wirelss is working and the cables are all good. I know that I can plug my laptop into the port on the hard wire router that the wireless was plugged into and I can get internet. So the only thing I can think of is the inernet is being blocked at the E2000.
View 1 Replies
View Related
Nov 19, 2012
My WRT54GL Linksys modem has me stumped, it will not connect no matter what I try. it worked fine until just recently after a power outage; everything seems to be working perfectly fine hardware wise; the router shows a solid power led and network activity on WLAN, Ethernet, and Internet. I've tried soft resets and factory reset, clearing my caches, releasing/renewing IPCONFIG.
The peculiar part is that it is not letting me access the web config at 192.168.1.1 while connected with the modem, however if I plug the router directly to my PC's ethernet port I can access the config; Itried updating the firmware this way but it didn't solve the problem. I have no more ideas.
Below is the IPCONFIG information with the modem and router hooked up:
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller #2
Physical Address. . . . . . . . . : 00-04-4B-17-C2-1A
[Code].....
View 2 Replies
View Related
Jan 14, 2013
I am running the most recent firmware 1.1.28 released on Jan 2nd(ish) 2013 and if I try and access or configure my external Segate Freeagent 1.5 GB it essentially crashes my router whereby I cannot reach the internet nor the Admin console. I have to power cycle to be able to connect?
View 9 Replies
View Related
Oct 19, 2011
So i have set up my Dir-615 router and it worked for about a week perfectly. Then one day i was able to connect to the router, but it says that there is no internet connection. This is untrue since i am able to connect to the internet if i unplug from its WAN port and put it straight into my laptop.
View 8 Replies
View Related
Jul 19, 2010
I have A a linksys WRT54G2 and am trying to connect it to my wii. I had my Wii search for an access point And it found my router. I put in my password and it was accepted but I am still Not Connected to the internet.
View 3 Replies
View Related
Dec 12, 2012
I have in my basement a router (DLink DIR-655) which is connecting to our ISP, and I have cables running to wall jacks in the first floor. A wall jack which terminates in the living room I have connected to a switch, a DLink 10/100/1000 (DGS-1005G). To this I have my PS3 connected which can connect to the internet fine (although it seems to not get the same upload / download speeds other devices get) and my Sony Bravia TV (KDL-46Z5100). The PS3 registers as GB, while the TV 100MB (its port lights orange).
The problem is I can't get the TV to connect to the internet. If I try DHCP, it doesn't seem to find the DNS server (on another switch connected to the same router in a different room). If I hard code the IP address, still nothing.
I found that if I connect the TV directly into the wall, it can connect. It's just through the switch I'm having problems. Additionally, even I then plug it back into the switch and connect the switch to the wall jack, the connect continues to work. It just seems that i can't get it initialize when connected to the switch.
View 1 Replies
View Related
Jun 23, 2012
Trying to connect one computer to the internet using a USB Verizon Pantech modem and at the same time connect to printer wirelessly through a Linksys router. We are able to connect to one or the other and can print when connected to the home network or we can surf when connected to the Pantech. We can connect to both networks at the same time, but when we do we can neither print or surf.. It cannot find the printer and does not access the internet at all. Is it possible to do this without buying additional hardware
View 3 Replies
View Related
Jul 6, 2012
After a power failure nothing could connect to the internet anymore. I called MTS (ISP provider) and they had me change some setup on my PC. Now my PC connects to the internet, but nothing else will connect (X Box, WII, iPods, Laptop). They were connected wireless before the power outage through my router. MTS said they are only responsible for ensuring their model works, not routers.I have checked some router settings. It is set for DHCP with 50 users.
View 15 Replies
View Related
Mar 12, 2013
I have a Wimax internet connection via an ethernet cable from a small roof top receiver dish. Inside the house the cable (RJ45) is plugged into the POE slot on one side of a small electrically powered black box, and from the other side, an ethernet cable (RJ45), connects to my PC. I want to share my internet connection with my HTC mobile and would prefer to make use of an existing Belkin 54g ADSL2 modem/wireless router (Belkin F5D7633) if I can. As this router's incoming port is specifically for ADSL my internet RJ45 cable can not plug into it. I have been advised that I can still utilise the router part of the Belkin though, using my PC as an access point, by plugging the ethernet cable from the PC side of the little black box into LAN 1 on the router, then joining the PC to LAN 2 of the router with another ethernet cable.I did not alter the configuration of the Belkin at all (having reset factory defaults beforehand), mainly because although I could access the internet from my PC and my mobile, I could not access the IP address of the router, presumably because the properties of the local area connection on my PC remained unchanged with the IP address (172.168.1.149), Subnet Mask (255.255.255.0), Default Gateway (172.168.1.1) and 3 DNS addresses (172.168.1.1) (10.30.0.1) (8.8.8.8) as they were before hooking up the Belkin. The IP address the mobile received through WIFI on connecting to the Belkin was 172.168.1.148
I was not unduly concerned about not being able to access the configuration of the router as everything was working as I had hoped it would and even when I powered off my PC I still had internet access on my mobile. On rebooting the PC, however, I found that the router changed the DNS addresses on the PC to 2 only, both identical (192.168.2.1) and the IP on the mobile was allocated 192.168.2.2 Although I could still access the internet on my PC, I no longer had access from my mobile although the WIFI connection to the Belkin showed as being 'excellent'. When I did a 'repair' of my internet connection, hoping to revert to a fully operative state, the PC configuration changed again as follows: IP address becomes that of the router (192.168.2.1), Subnet Mask (255.255.255.0), Default Gateway (192.168.2.1), 2 DNS addresses (192.168.2.1) and the IP address allocated to my mobile remains (192.168.2.2) This configuration means I have no internet access from either PC or phone, but CAN access the router configuration. I restored a usable operating state by unplugging the power from the router, transposing the cables in the LAN ports on the router (swapped cable from LAN1 to LAN2 and vice versa), turned off WIFI on mobile and waited a minute or two. When I powered the router back up and switched on mobile WIFI again, everything was restored to the original working state and I have, once again, access to internet on both PC and mobile. It is very frustrating, however, to keep performing this ritual and I wonder if any of you more technically minded, know a way to work around this, perhaps by manually changing the configuration of PC or router?
View 3 Replies
View Related
Apr 4, 2011
I have a compaq laptop running Vista. We recently had our Uverse wireless router/modem replaced. Now my laptop will not connect to the internet. The laptop connects to the router but shows up as local connection only. Uverse tried all kinds of differant things to no avail. The laptop will hookup with a USB modem but I would like to get it back to how it was before.
View 14 Replies
View Related
May 1, 2011
I wired it all up correctly, and Continue to get "error 322: check router" upon every attempted install. I did some research and tried releasing and renewing IP amongst restarting all networking devices AND PC's. Peculiar enough, I could connect AND get online wirelessly from a netbook, but neither of my 2 PC's could connect via a wire. I got a defective router, is it possible the ports are malfunctioning? because the lights are on, but 3 or all of the 4 lights are continually on when only 2 ports are plugged in
View 5 Replies
View Related
May 13, 2013
Region : Philippines
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Smart Bro
Today my router stops working. There is no internet on wifi even on lan. I thought my ISP is the problem but when I plugged in the wan cable to my laptop there's an internet. I tried to switch off the router and when I turned it on, there's an internet for about 15 seconds then after that there's no internet again. I also restore the router to its default setting but it doesn't solve the problem. This is the first time it happens to my router. I'm not using static ip address
View 1 Replies
View Related
Apr 20, 2013
I have a BEFSR41...about 2x a week when connecting to internet I have to pull and replug router in order to get on-line.
View 3 Replies
View Related
