Cisco Routers :: RV220W Rebooting / Locking Up?

Jan 18, 2013

I've got a RV220W that for some reason has started acting a bit strange. A couple of times a day the network stops functioning, both wireless and wired. At first I thought this had to do with my newly installed laptop, that it maybe caused some hickup that made the router reboot but even when it's turned off I can still read in the logs of my NAS server (Qnap TS-419P+) that "Lan 1 is down" followed by a "Lan 1 is up" a couple of minutes after.
 
The things connected to the network by wire is my Macbook Pro (2012), the Qnap and an LG home theater system and the wireless devices are a couple of iPhones and an iPad. The problems started after new years eve and I've been running the latest firmware (1.0.4.17) for a few weeks before that.

View 1 Replies


ADVERTISEMENT

Cisco Routers :: Stop RV220W Crashing And Rebooting?

Mar 14, 2013

How do I stop the rv220w from continuously rebooting?
 
I have been keeping track of when it crashes and reboots and here is what has happened today:
 
14/03/2013 00:26 crashes and reboots
14/03/2013 07:28 crashes and reboots
14/03/2013 11:14 crashes and reboots

[Code]....

View 1 Replies View Related

Cisco Routers :: RV220W Rebooting At Random Intervals?

Jan 27, 2013

our RV220W router has been experiencing random reboots throughout the day, causing a network outage for our local network for the few minutes it takes for the router to start up again. We've seen it reboot at least 5 today alone (and the time is currently just a little over 1pm).I'm having trouble finding the reason for these reboots in the router's logs, although I find these two lines repeating in the error log:

Mon Jan 28 13:20:52 2013(GMT+0100) [rv220w][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=11
Mon Jan 28 13:20:52 2013(GMT+0100) [rv220w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 11 failed. status=-1

I'm not sure why these messages pop up, since we're not using the bandwidth limiter module of the router (granted, we do use QoS profiles to ensure our own LAN is prioritized over the guest VLAN). I'm also not sure whether this is related to the router reboots.
 
I also find the following repeated line in the warning log:

Mon Jan 28 12:50:50 2013(GMT+0100) [rv220w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK 

The router is currently running on firmware version 1.0.4.17 (latest official release), since we needed support for hairpin connections (as I found out in a previous thread of mine). I've seen the suggestion of downgrading to a previous firmware version in another thread, which has possibly solved it for the poster in that thread, but as we really need the hairpinning support, I don't know which firmware version is safe enough to downgrade it to, if needed.

View 10 Replies View Related

Cisco Routers :: RV220W Rebooting Daily / Setup With SSL VPN Users

Dec 3, 2012

I have a RV220W setup with SSL VPN users, authenticating to an internal Active Directory. Maybe 5 ports forwarded and 8 external IP addresses. Besides this i have 1 data VLAN and a voice vlan on my network.
 
The reboots are on different times on a day, even on Sundays at 7 AM when noone is logged in to the network.FW is at 1.0.4.17.

View 1 Replies View Related

Cisco Routers :: RV042 VPN Router Keeps Rebooting

Mar 21, 2012

I have a Linksys RV042 10/100 4-Port VPN Router with Firmware Version 1.3.13.02 and l have noticed that the Router keeps rebooting on average every couple of hours.We have it setup for Load Balancing 2 ADSL Services.

View 3 Replies View Related

Cisco Routers :: WRVS4400N V2 - Router Keeps Rebooting

Nov 28, 2012

I've got a WRVS4400N V2 Router that just keeps rebooting itself. It powers up, the red LED stays lit, it gets part way through the boot process and reboots itself. I would like to try to re flash the device, but don't know if this is possible in the condition that it is in.

View 3 Replies View Related

Cisco Routers :: WRVS4400N Rebooting When Streaming Video

Aug 5, 2012

I have a persistent any very annoying issue that the router reboots on it's own when I am streaming video from Netflix or other similar applications.
 
I read some reviews about this router which stated that this was a known problem, but apparently was resolved with latest firmware updates.
 
My router is new (less than 1 year). It came originally with the 2.0.1.2 firmware which I updated to the 2.0.1.3
 
That did not resolve the problem. So my question is, is there any aditional configuration necessary to stream video without interruptions, or, is this a hardware problem?

View 2 Replies View Related

Cisco Routers :: RV016 V3 With Firmware 4.2.1.02 Constantly Rebooting?

Dec 6, 2012

I have an RV016 V3 with firmware 4.2.1.02 that is constantly rebooting making it unusable.  I have one LAN connect and 3 WAN's, 2 DSL's and one Cable Internet in a load balance config.  I have tried firmware 4.2.1.01 and it reboots also.  do I get and RMA from Linksys and send this pig back?

View 6 Replies View Related

Cisco Routers :: RV120W Rebooting Itself When WAN (ADSL Modem) Breaks Away

Aug 16, 2011

I have a RV120W that reboots itself when the WAN (ADSL modem) breaks away. With an old D-Link low end router, reconnecting after a failure is completed after 5 seconds and nobody cares, but the RV rebooting takes almost 2 minutes which is actually noticed...I also have some trouble getting VPN running, QuickVPN as well as normal IPsec, using either Shrewsoft or Greenbow as clients. get this router running with 3rd party VPN clients?

View 1 Replies View Related

Belkin Routers :: F5D8236 Rebooting Itself Because Of Reset Button

Apr 22, 2013

Why My Belkin Router F5D8236-4 Ver 2 always rebooting itself. the router lamp is on and then the security lamp is on and then the router rebooting itself. this happening because im push the reset button. im already try to upgrade the firmware with recovering tool (Boot Loader / Tiny Kernel Version v0.02) from 192.168.2.1 but the problem still happening.

View 3 Replies View Related

Cisco Routers :: RV110W Throughput Drops Substantially A Few Days After Rebooting

May 20, 2013

My RV110W is only a few months old and apparently started ginvg me issues shortly after I got it. Since it was new, however, I only recently suspected it as the culprit!
 
I have a simple home/small business setup. A single PC wired into the lan and a handful of occasional use laptops & Android phones/tablets and a Playstation.My connection is a 30M down / 5M up cable link. I have a UBEE DOCSYS 3.0 cable modem operating in passthru mode to my RV110W.
 
Over the course of several days, thruput drops from the measured 30/5 down to as low as 1/whatever. Rebooting the RV110W restored full speed. The UBEE has never been rebooted during this time. Connecting my wired desktop PC directly to the UBEE modem give me the full 30 downlink speed even when the RV110W perfomance has dropped to 5 or even 1.
 
I am using onle a single wireless LAN, no logging turned on, no VPN, no other 'tuning of settings.As it is, this device must be rebooted every few days to restore full network speed. This is unacceptable, of course - especially from a small business class device!

View 6 Replies View Related

Belkin Routers :: N750 Router Rebooting Every Few Hours For No Reason

Nov 29, 2012

I have an N750 DB router and it has been rebooting every few hours for no reason. This has just started happening about 4 days ago. I don't know why but when I check the system logs its filled with the following. [code]

View 2 Replies View Related

Cisco WAN :: ASR 1001 Console Locking Up

Dec 29, 2012

i have 1001 ASR which boots up ok but shows a warning "filesystem is not clean" and thereafter the image is validated well, it shows up the following two messages and just goes idle from there. [code]

View 6 Replies View Related

Cisco VPN :: VPN Client (5.0.07.0290) Locking Up PCs?

May 11, 2011

We do some remote work for our customers and often have to use their VPN in order to connect to their systems. We have had no problem utilizing the Cisco VPN with some of our customers unti recently. We picked up another customer that uses the Sonicwall VPN. If I sign onto the Sonicwall client, sign off, and sign into the Cisco VPN client, at the point that it makes the connection, it completely locks up my users' PCs. It happens to all of them.
 
I've discovered that from a fresh boot, I can get on and off the Cisco VPN all day, but as soon as I utilize the Sonicwall VPN, and then return to the Cisco VPN, it locks up every time.
 
All of my machines are Windows 7 and are using the Cisco VPN Client Version 5.0.07.0290.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Connected To AD Locking Out User?

Feb 18, 2013

  So we have this problem that just started, I can replicate the issue as well, if a user makes a mistake on typing there password after 1 attempt ACS sends 3 to AD locking out the user.
 
  In a putty or secureCRT session after 1 password failed attempt, I am unable to retry with that same session.

  The issue seems to be that after 1 bad password attempt, from the client side I am unable to get another try.

View 1 Replies View Related

Cisco VPN :: ASA 8.2.2 Locking Down Anyconnect Authentication To AD Group

Nov 28, 2011

I can't seem to find any documentation to how to get this working. I'm trying to make it so that only users of a certain AD group are authenticated for my Anyconnect VPN on my ASA 8.2.2
 
I've found the documentation on how to prevent logins using the  msNPAllowDialin attribute, but not how to base it on group membership (memberOf) [code] I need to do any kind of restrictions inside the actual group-policy TESTGROUP ?

View 2 Replies View Related

Cisco Routers :: RV220W / What Exactly Is QuickVPN

Apr 2, 2012

what exactly is QuickVPN?Is it a IPSec VPN?Is it a PPTP?Is it a SSLVPN?can I resolve my local hostnames? That means, can I configure a lokal DNS Server?

View 3 Replies View Related

Cisco Routers :: RV220W VPN Setup

Aug 24, 2012

I am trying to setup and configure a VPN on the RV220W that uses IPSEC so I can use the Cisco VPN Client I use at work, I have gone through the user manual 11 or 12 times now but still cannot work it out. I cannot find where on the Rv200W iset up the phase 1 authentication username and password which will then lead me onto the phase 2 stage of asking for a username password to allow me access.

View 8 Replies View Related

Cisco Routers :: Static IPs Behind RV220W

Jul 3, 2012

Picked up a pair of RV220W's for a project I'm working on.  I have several IP's available, 4 of which are assigned to/in use by a server behind the RV220W.  All 4 of these IP's are static external IPs.  How I can configure the RV220W so that requests to those 4 IP's get routed to the server.
 
Prior to purchasing this, I was under the impression what I was trying to do was called one-to-one NAT, but after reading the 'Help' document on the one-to-one NAT page, I don't think this is right.  Emphasis added below: Cisco RV220W Wireless-N Network Security Firewall Help FirewallOne-to-One NATOne-to-one NAT is a way to make systems behind a firewall and configured with private IP addresses appear to have public IP addresses.One-to-One-NAT Rule TableThis table lists the list of available One-To-One NAT rules configured by the user. Private Range Begin: start ip address in private (LAN) ip addressPublic Range Begin: start ip address in the public ip address (WAN IP), Public IP Subnet Mask: The Subnet Mask of the public IPRange Length: Range length maps one to one private address to public address up to the given range.Service: This column shows service to be accepted by LAN Host.The actions that can be taken on One-to-One-NAT rules are:(Check Box At First Column Header): Selects all the entries in the table.Add: Opens the One-To-One NAT Configuration page, to add a new entry. Edit: Opens the One-To-One NAT Configuration page, to edit the selected entry.Delete: Deletes the selected entries.
 
So according to their documentation, the server in question would need to be configured with a private IP.  Unfortunately, one of the applications I use is licensed via IP address and my understanding is that I cannot use the software with private/non-routable IP addresses.
 
Is the RV220W capable of not only securing the line (firewall, access rules, content filtering, port trigering & forwarding etc) but also doing what I was hoping to do (keeping the external IP's on the server, and routing appropriately)?

View 9 Replies View Related

Cisco Routers :: Dynamic DNS With RV220W

May 15, 2012

I'm using a RV220W router, and recently got shifted to a dynamic IP solution.Now, I've got a no-ip.org address, but the update service seems to be on no-ip.com. So, I try to enter mydomain.no-ip.org OR mydomain.no-ip.com in the dynamic dns settings, under Host and Domain Name, but when saving the settings it says
 
'The hostname specified does not exist in this user account' ,which seems to indicate that it manages to login to the update service but gets a negative reply.Is it possible to use the RV220W with no-ip.org/com?

View 5 Replies View Related

Cisco Routers :: RV220W Won't Allow Web Access Across VPN

Dec 12, 2012

We have 2 sites connected thru 2 RV220W routers via VPN and most things are working fine. I have noticed however, that any device that has a web interface, i.e. our Sharp Copier and our Freenas server, is inaccessible. The page tries to come up but then I get the Cisco "server is down" page generated by the RV220W.
 
I can pull up the web interface pages if I use a machine on the local LAN but not on any machine across the VPN. The only commonality I can think of is the RV220W blocking that traffic for some reason..

View 8 Replies View Related

Cisco Routers :: RV220W IPsec VPN On Mac OS?

Sep 28, 2011

Cisco support write down manual (workaround), how to setup IPsec VPN connection on Mac OS 1.7?

View 5 Replies View Related

Cisco Routers :: Associate Name To IP - RV220W

Nov 27, 2011

Is there anyway to associate a name to an IP in the RV220W?  I am coming from a WRVS4400N v2.  Folks are complaining that they can't connect, for example via Real VNC, via the PC name any longer.  They have to use the IP address.  In the past I put the names of the PCs in the WRVS4400N when I reserved IPs via MAC addresses (some call this assigning static IPs).  There isn't any place in the RV220W to put the name.  Even when I look at the DHCP list a lot of them show up as "unknown".  I am sure this is a NETBIOS thing but I'd rather fix this in the router as I have always done in the past.

View 4 Replies View Related

Cisco Routers :: RV220W Firmware - Getting 1.0.2.1 Or 1.0.2.3?

Jul 22, 2011

i have a RV220W  and absolutely nothings functional on this stupid Router, no NAT , no Port Forwarding and I cant access my Network from Outside. Any firmware link for downloading. This address works, its handling special webrequest.

View 1 Replies View Related

Cisco Routers :: Set Up PPTP VPN With RV220W

Jul 19, 2012

I set up a PPTP VPN with an RV220W recently.  It was working flawlessly until a recent power outage and now users are getting the 807 error when attempting to connect.  I have PPTP passthrough enabled and TCP/UDP 1723 open.  As far as I can tell GRE 47 is open as well. Why it was working and is not working after a power outage?

View 2 Replies View Related

Cisco Routers :: RV220W Just Disappears

Jun 23, 2012

Having a strange problem that just started this week and got worse this evening. I have a RV220W that is feeding my network. The RV220W sits behind a broadband modem and acts as the DHCP for the network and those computers access the internet that way. Anyway, tonight started an issue where the the RV220W just disappears. Becomes unpingable. I recycle power, and within anywhere from 5 to 10 minutes, it's gone. No longer pingable.  Even if I plug a latop directly into it.If I power cycle the RV220W it comes back and I can ping it and access it and its settings. 5 to 10 mins later, I again lose it. Nothing was done. Its been working fine for a few weeks. Had a similar outage last Tuesday, but a recycle of everything brought everything back into line. After I lose connection to it, the lights I expect to be lit remain lit.

View 1 Replies View Related

Cisco Routers :: RV220W - UPnP Does Not Work?

Jan 26, 2012

I am unable to make UPnP to work on the RV220W. I am forced to use port forwarding.

View 10 Replies View Related

Cisco Routers :: RV220W Cannot Save Settings With IE9?

Nov 20, 2012

Nothing happens when clicking the SAVE button after making changes on the VLAN Membership screen when using IE9, but it work fine with IE8. Any problems using IE9 during configuration?

View 4 Replies View Related

Cisco Routers :: RV220W / Getting Bad Bandwidth Sharing?

Jan 31, 2013

When someone downloads a file, or similar, there seems to be no, or very little, room for other requests. I've even tried to be the only one on the network, start a download (from ex. Intel) and then tries to access a simple website, almost only text, and its extreemly slow. I hav ethe latest firmware, a windows domain network and the routers is not acting as dhcp server.

View 4 Replies View Related

Cisco Routers :: Where To Find MIB Files For RV220W

Sep 26, 2011

Where I can find the MIB files for RV220W router?

View 2 Replies View Related

Cisco Routers :: RV220W - Very Slow Wi-Fi Connection?

Aug 5, 2011

I'm an IT professional with more than 10 years experience. I have spent last 5 days trying to figure out why the wifi connection to this router is so slow, but still no luck. I'm getting only 13Mbps even if my laptop is next to the router! (wired connection worked ok)
 
I have tried all sort of setting combinations, 2.4GHz/5GHz; N only/ G,N Mixed;  Auto/20MHz bandwidth; different channels; WPA2 encrypted vs open; disable firewall; wmm enabled/disabled; 1.0.0.26/1.0.1.0 firmware... no matter what I try, I always get only 10 - 15Mbps speed.
 
Once I replace this router with my old router, it worked perfectly --- getting 70 - 80Mbps with exactly the same testing environment and configuration.
 
I really expect this router to offer much faster wireless speed according to this review: [URL]

View 12 Replies View Related

Cisco Routers :: Workgroup Accessibility With RV220W

Apr 30, 2013

I'm using a RV220W in my home office. Before this router I was. using a Sitecom router which did not cause any problems. I have setup a home network. The RV220W connects to the provider modem. The client components connect to the RV220W. Which acts as DHCP gateway. The DHCP features of the modem are disabled. I have assigned all network client devices to the same workgroup. I have to windows 7 PC's. one of them acts as fileserver. when trying to acces it from the other fixed PC or via a laptop the fileserver is visible but not accessable. I can not open it and access the shared folders.It has worked for a brief moment, but without changing any settings it stop working. I have never had accessability problems with the sitecom router. I have installed the latest firmware and tried rebooting the router several times. I have also started again with the factory defaults.

View 3 Replies View Related

Cisco Routers :: How To Configure QoS For VoIP In RV220W

Jan 8, 2012

I have a cisco RV220W router used in a home environment. Recently I purchased a Siemens Gigaset A 580 IP phone. It works OK so far but I would like to optimize the configuration for VoIP traffic and apply QoS for VoIP on this router. Any guide with the recommended configuration and preferred settings of the same? I have not used QoS previously

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved