Cisco Routers :: RV220W - Very Slow Wi-Fi Connection?

Aug 5, 2011

I'm an IT professional with more than 10 years experience. I have spent last 5 days trying to figure out why the wifi connection to this router is so slow, but still no luck. I'm getting only 13Mbps even if my laptop is next to the router! (wired connection worked ok)
 
I have tried all sort of setting combinations, 2.4GHz/5GHz; N only/ G,N Mixed;  Auto/20MHz bandwidth; different channels; WPA2 encrypted vs open; disable firewall; wmm enabled/disabled; 1.0.0.26/1.0.1.0 firmware... no matter what I try, I always get only 10 - 15Mbps speed.
 
Once I replace this router with my old router, it worked perfectly --- getting 70 - 80Mbps with exactly the same testing environment and configuration.
 
I really expect this router to offer much faster wireless speed according to this review: [URL]

View 12 Replies


ADVERTISEMENT

Cisco Routers :: RV220W Wireless File Transfer Slow At 2MBps?

Jul 23, 2012

I have a RV220W operating in 2.4GHz N-only mode. Channel bandwidth is set to 20MHz, channel to 6 (a site survey shows that channel as completely clear), WPA2/AES. I am connected to a TrendNet wireless bridge. The admin page for that wireless bridge shows a link quality of 100% with a signal strength of 71%. If I select a higher channel (11), the signal strength drops to 51%.
 
I have a Windows 7 PC connected to the Trendnet bridge and a Windows 7 server connected to the RV220W, both via a 1Gbps LAN port. When I transfer a file from the server to the PC or vice versa, I get a lowsy 2MBps (~20Mbps) transfer rate. That seems awfully slow. I tried channel bonding from 20 to 40 MHz

View 2 Replies View Related

Cisco Routers :: RV220W - Setup An IPv6 Connection

Jan 25, 2012

My ISP provides IPv6 connectivity in the form of dual stack IPv4/IPv6 with DHCPv6 Prefix Delegation. Using a Cisco IOS-based router I managed to make such a connection by using as a template the Cisco IOS configuration file that my ISP has posted as an example in the following link:
 
[URL]
 
The main point on this configuration is a PPPoE connection with:
 
interface Dialer46
ipv6 address autoconfig default
ipv6 enable

[Code].....
 
configure this router according the Cisco IOS configuration file I linked on the top in order to have a working IPv6 connection?

View 4 Replies View Related

Cisco Routers :: Setting Up IPSec Connection On RV220W?

Aug 26, 2012

We bought a RV220W in order to get a VPN in our Small Business. The RV220W will only be used to let clients connect to it and not a tunnel between another VPN box.We could use QuickVPN, but it won't be working in our case, because in order to use QuickVPN, the router wants to change its IP 10.x.y.1. Because we have multiple servers/services that are using a static IP, it would be quite painful to change the subnet. Therefore, we would like to stay on the same subnet and change it in worst case scenario only. This is why QuickVPN is not an option here.We could use SSL VPN, but most of our clients who will connect to the VPN are using Windows 7 x64. I have tried the Windows 7 x64 fix told in the latest firmware release notes, but I can't get it to work on my computer, which is a Win7 x64. It might still be broken. Many of them are not very tech-savyy, so I can't tell them to use a virtual machine to connect.We want a secure connection, therefore IPSec is better than PPTP. I've been trying to setup IPSec for the past hours but I can't get it working. At first, I wanted to use an SSL certificate, but having no luck with this, I switched to a Pre-shared Key (PSK) in order to get things simpler. Eventually I would like to use an SSL certificate, however I would like to get PSK working first to confirm that the IPSec connection is working.
 
I have attached with this post, screenshots of the IKE and VPN Policies. I have used the VPN Wizard in order to complete these fields. The local identifier is the WAN DynDNS FQDN. However, as for the remote FQDN, there should be none really, because clients are connecting to it, so the RV220W won't know in advance who's connecting and from where. I have read that when using the Responder type, the remote settings should not matter. Also, the PSK is 25 caracters long.After setting the RV220W up, I have set up a L2TP/IPSec VPN connection on my Windows 7­. I have set up the connection to connect to the DynDNS address and set up the PSK in the Advanced settings. After I typed my IPSec username and password to connect (which was created in the IPSec users section), Windows tries to connect and times out :
 
Error 789 : The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.
 
At the same time on the RV220W, this error shows up in the logs :
 
2012-08-26 23:45:24: [rv220w][IKE] ERROR:  Could not find configuration for 24.54.xx.xx[500]
 
I can't figure out what I am doing wrong. I've read the Administration manual quite a few times and it seems that I have followed everything by the book.I have tried to enable/disable my Windows firewall, but did not get any luck. The RV220W is located at a remote office, to make sure that I can connect from the outside, before you think that I'm trying to connect to the outside, from the inside I have changed few settings in the IKE policy to try to make it work. Settings such as the Exchange Mode, because I've read that the Aggressive mode had issues. At this moment, the settings are back to default, once the wizard has been run. I'm thinking about setting a PPTP to confirm that this works, then move up to IPSec PSK, then to IPSec SSL Certificate.

View 1 Replies View Related

Cisco Routers :: RV220W Connection Drops Intermittently?

Jul 12, 2011

I installed the RV220W Router in my office about 2 weeks ago and everything works perfectly for 3-4 days but then my connection drops out and the router must be restarted to restore connectivity.  When I say the connection drops basically the internet connection drops out and my network connections drop shortly thereafter.  Usually the wireless connections lose connectivity followed within a few minutes by the wired connections.
 
Is there something in my firewall settings that could cause this issue?  I have checked with my ISP to verify there are no problems on their end.

View 12 Replies View Related

Cisco Routers :: RV220W WAN Connection Drops Frequently?

Apr 14, 2011

I'm on firmware 1.0.0.26 and I'm seeing frequent drops in the WAN connection. Most network clients don't notice the drop because it reconnects, but the X11 windows server running over a VPN drops the session and I have to re-establish it. Also, at the same time I experience a 15-20 second silence gap on my VoIP phone connected to vonage (not over VPN). Never happened on my Linksys router, but it happens many times a day on the rv220w. When the drop happens I get the errors listed below in the router log:
 
Fri Apr 15 09:53:21 2011(EDT) [rv220w][System][PLATFORM] platformHandleDBUpdate:dot11STA op=18 row=1Fri Apr 15 09:53:21 2011(EDT) [rv220w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 1 failed. status=-1Fri Apr 15 09:53:21 2011(EDT) [rv220w][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=1Fri Apr 15 09:53:23 2011(EDT) [rv220w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OKFri Apr 15 09:53:23 2011(EDT) [rv220w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OKFri Apr 15 09:53:34 2011(EDT) [rv220w][System][PLATFORM] platformHandleDBUpdate:dot11STA op=9 row=1Fri Apr 15 09:53:35 2011(EDT) [rv220w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 9 dot11STA 1 failed. status=-1Fri Apr 15 09:53:35 2011(EDT) [rv220w][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=1

View 12 Replies View Related

Cisco Routers :: RV220W - How To Configure SSL VPN Users Connection

Jun 25, 2012

how can i configure the SSL VPN users connexion to connecte from my remote PC (Windosws 7 32 & Internet Explorer

View 1 Replies View Related

Cisco Routers :: PPTP Connection To RV220W Fails?

Jun 4, 2012

I've got trouble using PPTP connections with the RV220W small business router.When trying to connect to the router of a branch office with the Windows PPTP client (i.e. on Windows 7) from outside the companies network first everything seems to be in working order (user name and password are checked, the device is registered in the remote subnet) but then a window pops up saying there has been an error connecting.
 
Here is some information on my setup:RV220W with firmware 1.0.3.5It connects to the Internet using PPPoE dialindyndns account configured and workingAnother router working in "Act as a DSL modem" mode is used as a modem (AVM FRITZ!Box 7170)The RV220W is maintaining a IPSec tunnel to a main office, which is working finethere are 2 local VLANs (one with access to VPN tunnel, one without), each with a own subnet (192.168.201.0/24 and 192.168.202.0/24)PPTP users are on a seperate subnet (192.168.203.101 - 192.168.203.111) My first guess was, that the intermediate router acting as the modem could be a problem, but i verified all settings on that router and it should not filter anything. After all port forwardings, the IPSec tunnel and so on are working.

View 6 Replies View Related

Cisco Routers :: RV220W Cannot Establish PTPP VPN Connection Over WAN

Sep 22, 2011

I am not able to establish a PTPP connection with my iPhone over WAN. When I am in my local Wireless LAN it works nice using the external FQDN of the RV220W. But when I test the VPN access over 3G (meaning I am coming in over the WAN port) I get and error message that the connection to the PPP server could not be established.
 
Some more Info

- Running latest firmware
- Port 1723 is open to the Internet
- ISP doesn't filter anything
- No Firewall settings blocking anything at the moment
- Nothing in the logs indicating what the problem is
 
So what needs to be done here to get it running over the WAN port and not only over the LAN ports?

View 2 Replies View Related

Cisco Routers :: RV220W Won't Recognise Internet Connection

Sep 11, 2011

My RV220W is sitting behind a Dynalink RTA1046VW ADSL Modem.
 
Can't get the RV220W to detect an internet connection through the WAN port. Have got the PPPoE profile set up etc. Have tried the Dynalink in bridging mode, but to no success. Tried the setup wizard.
 
Firmware is current: v1.0.2.4. The connection is picked up ok through the ethernet ports.

View 5 Replies View Related

Cisco Routers :: RV220W WAN Connection Drops Every Hour

Aug 24, 2011

Lately (after upgrading to 1.0.2.1 and 1.0.2.4) I have been seeing these particular errors in my syslog server:
 
10.0.0.1 01/02/11 17:54:47 08/24/11 12:54:58  kernel Warning  rv220w "KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK"
10.0.0.1 01/02/11 17:54:47 08/24/11 12:54:58  kernel Warning  rv220w "KERNEL [Kernel]

[Code].....

View 11 Replies View Related

Cisco Routers :: RV220W SSL Connection Via Open VPN Client

Sep 27, 2011

I'm wondering if it's possible to setup SSL VPN connection via OPEN VPN client?I'm a Mac OS 1.7 user with Tunnelblick.
 
I tried to use "built-in" SSL VPN Tunnel client but unfortunately it's not working - during installation Java exception appears saying that either I don't have admin privileges or there is not enough space.. Of course I'm admin and there is plenty of space...

View 5 Replies View Related

Cisco Routers :: RV220W - How To Make Successful VPN Connection

Jan 16, 2012

I'd like to enable client to router VPN connections. I have a question how to make any sucessful VPN  connection to RV220W. From all the tests I made only SSL VPN on Windows XP x86 client machine was working.
 
For IPSec VPN I always receive this message: [rv220w][IKE] ERROR:  Could not find configuration for XXX.XXX.XXX.XXX[500]. I tried with windows and shrewsoft vpn client.
 
Can't make SSL VPN to work in Windows 7 x64 client because the drivers are not digitally signed. It only works in Windows XP x86 but this is not acceptable. I need universal solution for win clients.
 
I also need working solution for Android Phone? Router firmware 1.0.3.5. I also tried this step by step guide. No go.

View 2 Replies View Related

Cisco Routers :: RV220W Remote PPTP VPN Connection Fails?

Jan 23, 2012

i'm having problems connecting to my RV220W using PPTP. The first time I set up PPTP on the box, everything worked just fine. Now, however, PPTP just won't work. No matter how I try to tweak various settings on the router, the connection fails. I have tried connecting with Windows 7, Android and OSX with no success.The router came with version 1.0.1.0, and I have tried downgrading to 1.0.0.26 and upgrading to 1.0.3.5, but alas, I can't seem to make PPTP work again.

View 1 Replies View Related

Cisco Routers :: Make IPSec VPN Connection From IPhone To RV220W

Aug 22, 2011

i have try to make a IPSec VPN Connection from my iPhone to my RV220W.
 
On the iPhone i get the message "The VPN Server was not found".
 
It is possible to make a IPSec Connection or only a PPTP ?

View 4 Replies View Related

Cisco Routers :: RV220W - VPN User Connection Status Table Empty?

Feb 15, 2012

I was wondering if anyone has seen their VPN User Connection Status Table empty even though you know for sure clients are connected?  I connect with my iPhone to the PPTP VPN successfully and it works fine but there's no entry for the connection on the VPN User Connection Status Table.  Is that normal?  Does the router only collect data about Windows clients?

View 3 Replies View Related

Cisco Routers :: RV220W Verifying Network Doesn't Complete Connection

Jan 10, 2013

We have RV220W at corporate office...intent is to have (5) groups of (3) users each connecting via VPN. Had assumed would be using QuickVPN and have set up users, etc and connections at current locations are quick, smooth, reliable. I have set up (2) locations (6 users so far). However, after 4th connection (no matter where or in what order) client hangs at "Verifying Network" and doesn't complete connection. So, I have unique usernames, etc but each of the (3) at a location are hitting the router with the same IP. Is this the problem? I'm sure the RV220W can handle 15 simultaneous connections, but can the router deal with (3) connections from the same external IP?

View 3 Replies View Related

Cisco Routers :: RV100W - Connection Is Slow / Go Down?

Dec 20, 2012

i got an issue with vpn and cisco rv100w, router is configured well and computers and iphone can connect with PPTP. Problem became when we map NAS drive from computer or we move data (1-4 Mb). Seems connection go down, speed is so slowly and drop the connection.Is it from router? or from Internet provider?
 
More data, If I connect to http of router/NAS .. all go fine, only when we need data from NAS (map drive by windows) copy, open files, ..., connection is so slowly and drop connection.
 
I saw in the logs of the router

[code]...

View 1 Replies View Related

Cisco Routers :: RVS4000 Slow With Fiber Connection?

Jan 8, 2012

I've recently upgraded from a 512k adsl connection to a 16mb fiber optic connection.Whereas I never had a problem previously, my rvs4000 slows to a crawl once or twice per week. The only solution seems to be to cycle the power since the admin interface freezes. I also have to cycle the power on my two wireless ap to get them back up.I believe I have the latest firmware, is this a common problem on a faster connection?

View 1 Replies View Related

Routers / Switches :: Internet Connection Has Become Weak And Slow?

Nov 17, 2012

My ISP tested my connection and told me my signal is very weak. I can no longer play games online because I lag tremendously. I can't steam videos while someone else is using the internet either. Also I can't access it on wireless devices unless I am in view of the router. I'm not sure what caused my connection to suck butI have the essential plan from cox.com. When I test my connection on speedtest.com I average 75ms/ping, 3.25mbps/dwnld spd, and

View 2 Replies View Related

Belkin Routers :: Very Slow Internet Connection With N300

Feb 10, 2013

Belkin N300 - bought two weeks ago and have had very slow internet connection since.

View 1 Replies View Related

Belkin Routers :: Play F7D4402Uk Connection Slow?

Nov 21, 2012

My Router has been gone from running at bout 7Mb download speed to 500Kb download speed. When the router is restarted using the menu software it will run quicker, but only for 20-30 second then back to a slow speed. It was off while we were on holiday in August and has not been any good since. Its a shame as it only 2 years old.

View 2 Replies View Related

Belkin Routers :: Slow Internet Connection With N600

Feb 13, 2013

Having an issue with my Belkin N600 router - when initially installed it was working fine but in the past week it has gtten slower - if I connect directly to my DSL modem my speed is 1.5 MBS when I use the router connection my speed drops to .1 MBS - tried resetting to factory defaults & that did not work also tried resetting my modem *& router still having the same issue.

View 9 Replies View Related

Belkin Routers :: N150 Slow Wifi Connection

Nov 20, 2012

My N150 wireless router sees 25mb+ speed from my internet connection but my wireless connects at 1mb. Why is the WiFi being resricted?

View 2 Replies View Related

Cisco Routers :: RV220W / What Exactly Is QuickVPN

Apr 2, 2012

what exactly is QuickVPN?Is it a IPSec VPN?Is it a PPTP?Is it a SSLVPN?can I resolve my local hostnames? That means, can I configure a lokal DNS Server?

View 3 Replies View Related

Cisco Routers :: RV220W VPN Setup

Aug 24, 2012

I am trying to setup and configure a VPN on the RV220W that uses IPSEC so I can use the Cisco VPN Client I use at work, I have gone through the user manual 11 or 12 times now but still cannot work it out. I cannot find where on the Rv200W iset up the phase 1 authentication username and password which will then lead me onto the phase 2 stage of asking for a username password to allow me access.

View 8 Replies View Related

Cisco Routers :: Static IPs Behind RV220W

Jul 3, 2012

Picked up a pair of RV220W's for a project I'm working on.  I have several IP's available, 4 of which are assigned to/in use by a server behind the RV220W.  All 4 of these IP's are static external IPs.  How I can configure the RV220W so that requests to those 4 IP's get routed to the server.
 
Prior to purchasing this, I was under the impression what I was trying to do was called one-to-one NAT, but after reading the 'Help' document on the one-to-one NAT page, I don't think this is right.  Emphasis added below: Cisco RV220W Wireless-N Network Security Firewall Help FirewallOne-to-One NATOne-to-one NAT is a way to make systems behind a firewall and configured with private IP addresses appear to have public IP addresses.One-to-One-NAT Rule TableThis table lists the list of available One-To-One NAT rules configured by the user. Private Range Begin: start ip address in private (LAN) ip addressPublic Range Begin: start ip address in the public ip address (WAN IP), Public IP Subnet Mask: The Subnet Mask of the public IPRange Length: Range length maps one to one private address to public address up to the given range.Service: This column shows service to be accepted by LAN Host.The actions that can be taken on One-to-One-NAT rules are:(Check Box At First Column Header): Selects all the entries in the table.Add: Opens the One-To-One NAT Configuration page, to add a new entry. Edit: Opens the One-To-One NAT Configuration page, to edit the selected entry.Delete: Deletes the selected entries.
 
So according to their documentation, the server in question would need to be configured with a private IP.  Unfortunately, one of the applications I use is licensed via IP address and my understanding is that I cannot use the software with private/non-routable IP addresses.
 
Is the RV220W capable of not only securing the line (firewall, access rules, content filtering, port trigering & forwarding etc) but also doing what I was hoping to do (keeping the external IP's on the server, and routing appropriately)?

View 9 Replies View Related

Cisco Routers :: Dynamic DNS With RV220W

May 15, 2012

I'm using a RV220W router, and recently got shifted to a dynamic IP solution.Now, I've got a no-ip.org address, but the update service seems to be on no-ip.com. So, I try to enter mydomain.no-ip.org OR mydomain.no-ip.com in the dynamic dns settings, under Host and Domain Name, but when saving the settings it says
 
'The hostname specified does not exist in this user account' ,which seems to indicate that it manages to login to the update service but gets a negative reply.Is it possible to use the RV220W with no-ip.org/com?

View 5 Replies View Related

Cisco Routers :: RV220W Won't Allow Web Access Across VPN

Dec 12, 2012

We have 2 sites connected thru 2 RV220W routers via VPN and most things are working fine. I have noticed however, that any device that has a web interface, i.e. our Sharp Copier and our Freenas server, is inaccessible. The page tries to come up but then I get the Cisco "server is down" page generated by the RV220W.
 
I can pull up the web interface pages if I use a machine on the local LAN but not on any machine across the VPN. The only commonality I can think of is the RV220W blocking that traffic for some reason..

View 8 Replies View Related

Cisco Routers :: RV220W IPsec VPN On Mac OS?

Sep 28, 2011

Cisco support write down manual (workaround), how to setup IPsec VPN connection on Mac OS 1.7?

View 5 Replies View Related

Cisco Routers :: Associate Name To IP - RV220W

Nov 27, 2011

Is there anyway to associate a name to an IP in the RV220W?  I am coming from a WRVS4400N v2.  Folks are complaining that they can't connect, for example via Real VNC, via the PC name any longer.  They have to use the IP address.  In the past I put the names of the PCs in the WRVS4400N when I reserved IPs via MAC addresses (some call this assigning static IPs).  There isn't any place in the RV220W to put the name.  Even when I look at the DHCP list a lot of them show up as "unknown".  I am sure this is a NETBIOS thing but I'd rather fix this in the router as I have always done in the past.

View 4 Replies View Related

Cisco Routers :: RV220W Firmware - Getting 1.0.2.1 Or 1.0.2.3?

Jul 22, 2011

i have a RV220W  and absolutely nothings functional on this stupid Router, no NAT , no Port Forwarding and I cant access my Network from Outside. Any firmware link for downloading. This address works, its handling special webrequest.

View 1 Replies View Related

Cisco Routers :: Set Up PPTP VPN With RV220W

Jul 19, 2012

I set up a PPTP VPN with an RV220W recently.  It was working flawlessly until a recent power outage and now users are getting the 807 error when attempting to connect.  I have PPTP passthrough enabled and TCP/UDP 1723 open.  As far as I can tell GRE 47 is open as well. Why it was working and is not working after a power outage?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved