Cisco Routers :: RV220W Wireless File Transfer Slow At 2MBps?
Jul 23, 2012
I have a RV220W operating in 2.4GHz N-only mode. Channel bandwidth is set to 20MHz, channel to 6 (a site survey shows that channel as completely clear), WPA2/AES. I am connected to a TrendNet wireless bridge. The admin page for that wireless bridge shows a link quality of 100% with a signal strength of 71%. If I select a higher channel (11), the signal strength drops to 51%.
I have a Windows 7 PC connected to the Trendnet bridge and a Windows 7 server connected to the RV220W, both via a 1Gbps LAN port. When I transfer a file from the server to the PC or vice versa, I get a lowsy 2MBps (~20Mbps) transfer rate. That seems awfully slow. I tried channel bonding from 20 to 40 MHz
View 2 Replies
ADVERTISEMENT
Apr 22, 2012
I have a wireless network with 2 desktop hooked up wired, and one laptop that's wireless. Accessing files on the desktop with xp installed is quick and transfers files at around 5-7mb/s. When I connect to my main pc with windows 7 on it, file transfer is EXTREMELY slow and almost always stutters and freezes. I've tried removing the drive from 'shared' and then adding it again, reinstalling my ethernet driver, swapping ethernet ports on the back of my router, and resetting it altogether. Still a slow transfer speed.I use workgroup all around, for xp and for 7.
View 3 Replies
View Related
Nov 7, 2011
I am having incredibly slow connection while transferring files using file sharing.I have the below hardware:
108Mbps TPLINK Wireless Router
TL-WR642G 108Mbps TPLINK Wireless Access Point acting as repeater
Laptops accessing internet and folder sharing enabled for local file transfer
Transfering of files excessively slow (after playing around with the settings was able to get 500KBps). I have set all wireless adapters on the laptops to 802.11g only.Tried setting the router and access point to both 54Mbps and 108Mbps 802.11G only as well as b/g.
View 1 Replies
View Related
Feb 23, 2012
1 newer build computer connected to D-link 655 via Cat6.1 laptop computer connected to same D-link 655 via Wireless N minicard. (Intel) (130Mbps connected) Router on a 10 foot shelf, always have full bar in wireless strength on 2nd computer.
Both computers can upload and download as expected from the internet. Transfers between the two computers though are slow. Both computers are loaded with Windows 7. Transferring files to or from the laptop transfers at 1.5MB/sec to 2 MB/sec.
View 1 Replies
View Related
Feb 10, 2011
just bought a WD my book world edition 2 NAS and have been trying to tranfer files wirelessly to it but a 700mb file is taking 25mins to trans. my book is connected by ethernet to netgear dgnd3300 router and my laptop has sitecom 300n usb doongle.is there some sort of setting i've missed or is this speed normal?
View 5 Replies
View Related
Mar 3, 2011
I have two machines that both have WUSB600N wireless network adaptors with a Cisco WRT160N router. The file transfer speeds between the two devices maxes out at 1.6Mbs. If I run speed tests off the internet I hit 15 to 20 and downloads are excellent. I have played with all kinds of settings for the driver and router but nothing seems to work. Both these devices are running Windows 7. I tried a file transfer with an XP device as well and it maxes at about 1.6. how to increase the bandwidth??
View 1 Replies
View Related
Mar 24, 2012
I have recently purchased a Cisco E4200 to replace my D-LINK DIR-655, which I thought was defective because I was getting slow wirless file transfer speed, regardless of setting, location and client.Using the E4200, when I transfer a file from a PC to another, both connected at 300mb on the 2.4ghz band, the file transfer rate reported by windows 7 and networx is from 2MB/s to 3.5MB/s. I think those transfer rates are not acceptable. Is that a good assumption ? I would expect something in the range of 10MB/s (which is what I get with a cheap dlink router, wired)
I also had great difficulty finding a channel. I had to try them all one-by-one as the auto channel selection made my PCs connect at 130mb.The E4200 is setup as follows:
-WPA-Personal
-Channel 5
-802.11n only
I have tried 3 different computers with different network adapters and they all underperform (IMO..).There are no other wireless networks in my area.I also took the E4200 to my office which is very crowed. Every single channel is occupied by several wireless networks. I get a file transfer speed PC to PC of about 2MB.I basically could have kept my DIR-655 as the speeds are identical.
View 4 Replies
View Related
Mar 12, 2011
Just relised this problem after trying to leech some stuff from a friend from his pc at a lan My connection seems to go REALLLY slow. Heres a pic nobody else is file copying and its the same from every pc.
View 7 Replies
View Related
Apr 7, 2011
i am running windows server 2008 with the hyper V role installed.i have installed windows 7 Professional as a guest OS. assigned 2 GB of Ram to the machine. the point behind the VM is to virtualize my FTP server and incase a format is required i have the VM file on my 2nd partition, host OS on another. i use Cerberus FTP Server on the Win7 OS. i configured the server to accept SFTP and TLS connections. on the host OS i installed Fire FTP and File Zilla, both Clients will at max download a 4 MB file at 64 KB/Sec .. i have seen both jump to about 80 KB but was only a split second and never held.. however if i login without SFTP and transfer over standard protocol, i download at 1 MB/sec. which is my normal speeds. would this be only to the encryption process?, in the Cerberus Server there are options to adjust download speeds, i have left it default, and altered it to allow its max configuration. My ISP is not limiting any connections that shouldnt be.
View 1 Replies
View Related
Jun 27, 2011
I recently switched from an older 10/100 linksys to this gigabit router from D-Link. However, when I try to transfer files from one computer to another on the LAN, the file transfers are ridiculously low, right around 16KB/s. I have CAT6 cable for all connections, but am baffled by what could cause such a slow speed. I'm trying to transfer files from my desktop (win7) to my server (Windows Home Server 2011).
View 3 Replies
View Related
Mar 16, 2013
I am getting very slow window file transfer speed (4 Mbps per second) between two connecting servers in Cisco 6509 switch. I have connect the two laptops in 6509 switch in same module using the same vlan and try to copy the files from one laptop to another and vice versa and got the same speed on 4 to 5 Mbps per second. Switch utilization is not more than 10% and both the laptops are connected in 1 Gbps full duplex.
I have checked by removing the gateway in both laptop but the output is same.
View 7 Replies
View Related
Apr 20, 2012
originally had two Netgear FVS318s set up with a VPN tunnel and everything worked as expected. I could connect to the server at the office from a machine at home and browse the files and more importantly do nightly backups of files that had changed at the office over the VPN to the house. The problem with the FVS318s was that for wireless I had to have another device and that the WAN to LAN throughput was something like 7Mbps. Kind of limiting when you consistently get 22Mbps from the ISP.So, I bought two Cisco RV220Ws to replace them with. I started by replacing the one at home and was able to get it going with the FVS318 at the office. The VPN was stable and I had no problem browsing the files on the server as I had already been doing. A couple weeks later I replaced the FVS318 at the office with the other RV220W and the VPN came up fine but I lost all ability to file share between the two sites. I've watched the phase 1 and 2 negotiations and they look good from both ends. =
View 4 Replies
View Related
Jun 16, 2012
anything I put into my hosts file, will not go through the Cisco RV220W router. This is part of the set up:
192.168.1.10 << RV220W
192.168.1. 15 << A client machine
192.168.1.99 << Internal DNS with forwarder to OpenDNS (208.67.222.222 & 208.67.220.220) + a laptop that's not on the internal network at all.
Now, the client machine and the laptop both have an entry in their hosts files:
174.156.12.81 insight.hello.com
From the laptop, I can both browse to insight.hello.com, and I can ping it in Xterm.
From the client machine (192.168.1.15) which is behind the Cisco Router/FW, I can ping insight.hello.com, but I can not browse to it. This is especially strange since the ping goes through the Router every bit as much as the http traffic does, so why is the router giving me a DNS error on that, but the ping goes through just fine?
The hosts file is supposed to supercede any other information from anywhere, so it out to not be a problem for the router either. Yet, it obviously is.
I have tried to disable the internal DNS server as well as OpenDNS and just run the ISP's DNS servers, but no change - I still get that blue DNS error screen from the CIsco router.
Above IP's & hosts are fictitious.
The hosts file doesn't get blocked in a sense, but what happens is that if you have "Content Filtering" checked - even without any rules - the router can not verify that 174.156.12.81 is in fact insight.hello.com in this case, since it doesn't exist in the public DNS system.
So, I unchecked Content Filtering and now it works as it should.
View 1 Replies
View Related
Jul 26, 2011
I am noticing the following issue with one of our VPN connections:
Site A is connected to the Internet with an ISA Firewall
Site B is connected to the Internet with a CISCO 5505
Both sites are connected together via a VPN ,Both sites have around a 6MB up and 6MB down connection to the Internet
If I sent a 100MB file from Site A to B it takes around 30-45 minutes to copy, which to me seems excessive.
I've run Wireshark on the server sending the file (from Site A) and the desktop receiving the file (Site B). Initially, the server sending the file was generating a large number of TCP DUP ACK, TCP FAST RETRANSMISSION, TCP PREVIOUS SEGMENT LOST AND TCP OUT-OF-ORDER messages. I narrowed it down to IPv4 Checksum Offload and IPv4 Large Send offload which I disabled on the server. This sped up the file copy and massively reduced the errors in Wireshark, but not to what I think it should be. I then performed Wireshark logging on the desktop receiving the file which was also generating a large amount of TCP DUP ACK, TCP FAST RETRANSMISSION, TCP PREVIOUS SEGMENT LOST AND TCP OUT-OF-ORDER messages. I disabled IPv4 Checksum Offload and IPv4 Large Send offload options on the network card of the desktop and tried resending the file, which made no difference in speed and still generated the above messages in Wireshark.
I have run an mturoute between site A and B and get the following:
C: emp>mturoute.exe 10.0.66.2 (to PC on site B)
* ICMP Fragmentation is not permitted. *
* Speed optimization is enabled. *
* Maximum payload is 10000 bytes. *
.[Code]....
View 2 Replies
View Related
Jan 25, 2012
I am trying to configure this router to obtain an IPv6 address from my ISP who offers a dual stack IPv4/IPv6 DHCPv6 Prefix Delegation service.
I did a WAN packet capture to see the type of DHCPv6 packets the router sends to the ISP in order to obtain an IPv6 address and I saw that the router is sending DHCPv6 solicitation packets of type IA_NA i.e. for Identity Association for Non-temporary Address. However, most ISPs that offer a dual stack IP4/IPv6 service, they use DHCPv6 Prefix Delegation in which case the router is expected to send DHCPv6 solicitation packets of type IA_PD i.e. for Identity Association for Prefix Delegation.
I then downloaded its configuration file and saw the following:
dhcpv6c = {}
dhcpv6c[1] = {}
dhcpv6c[1]["renewTime"] = "3600"
[Code].....
So, the option for the DHCPv6 client to perform a prefixDelegation request is disabled. Does that mean that if I set this flag to "1" it is going to work? Well, I edited the configuration file and changed this flag but the router refuses to load it! It complains about the file being changed. How does it know that? Is it computing some type of checksum? How can I manually edit this flag and update the router's configuration?
View 2 Replies
View Related
Aug 5, 2011
I'm an IT professional with more than 10 years experience. I have spent last 5 days trying to figure out why the wifi connection to this router is so slow, but still no luck. I'm getting only 13Mbps even if my laptop is next to the router! (wired connection worked ok)
I have tried all sort of setting combinations, 2.4GHz/5GHz; N only/ G,N Mixed; Auto/20MHz bandwidth; different channels; WPA2 encrypted vs open; disable firewall; wmm enabled/disabled; 1.0.0.26/1.0.1.0 firmware... no matter what I try, I always get only 10 - 15Mbps speed.
Once I replace this router with my old router, it worked perfectly --- getting 70 - 80Mbps with exactly the same testing environment and configuration.
I really expect this router to offer much faster wireless speed according to this review: [URL]
View 12 Replies
View Related
Jan 9, 2013
I have RS232 GSM/GPRS modem SIM900,by using this i can send/receive messages, make call.But now my Query is "By using this modem can i able to transfer files between two systems which are located at diffenent places",it is possible or not?
View 3 Replies
View Related
Nov 23, 2012
because I have a problem with my wireless connection and have everything configured correctly have done according to the link URL
Every Time I copy a file or multiple files over LAN switch from a PC to PC b become each restart the wireless module and am lost file.
View 6 Replies
View Related
Sep 13, 2011
I spoke with two different support agents with a well respected routermanufacturer. I got two different answers - No surprise.So, I ask the forum, what file transfer speeds should I expect when transfering a good sized amount of data (10gig) from wired PC on a 10/100/1000 network router to another PC via wireless connection 20 (feet away + two walls) using 802.11N.Both PC's are new / newer with win 7 64 bit. - Current transfer speeds - Both wired and wireless internet download speed tests are arond 21 meg per second. Both PC's wired and wireless get around 3.7 meg per second internet download (speed tests).At this point - no real difference in internet access between PC's and wired / wireless.
However, when I copy a file from PC1 to PC 2 (both wired) I get 68 megs per second. When I transfer the same data set (10 gig) from PC1 wired to PC 2 wireless, the data transfer falls to 3.7 meg per second. One rep told me to expect about 80% of my wired rate or about 54 megs per second (when using my 802.11N 300meg) equipment. The other rep (same company) told me that the 3.7 meg per second ia about the best I can expect. A transfer rate of 3.7 megs per second simply does not appear to be a reasonable speed given that all my wireless equipment is pretty new and supports numbers that are much higher
View 1 Replies
View Related
May 6, 2012
My XBOX started complaining when I began using Windows Media Center to stream videos from my PC to my XBOX. I found out that I had a wireless G router provided by verizon which wasn't fast enough to stream videos. SO, I went out and purchased a 4500EA router expecting it to be the fastest thing I had ever seen.
Now it seems a bit slow when trying to stream video from my laptop to the XBOX and i'm a tad bit confused as to why. So I did a file transfer from a desktop wired directly to the router from a laptop in the same room wirelessly connected to the network and my speed is about 4mbps. 4MBPS!? This device is supposed to be capable of moving packets LAN side at 450MBPS.
Both of my PC's are quad core, newer model PCs. I've tried moving files now for several hours with the same results. I've toyed around with my wireless adapters, changed power settings, full duplex, half, changed mtu sizes, changed security settings. I'm out of ideas.
Is getting about 1% of the advertised bandwidth normal?
View 2 Replies
View Related
Dec 10, 2012
From 6.0.199.4 to AIR-CT5500-K9-7-3-101-0.aes. Get the error below halfway through download of file to controller.
*Dec 11 14:18:55.775: %UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:4158 Error FTP file Transfer [ftp_get], <28>, No space left on device.
I have no idea how to delete files form the storage on the 5508? TFTP transfer gives me this error after the upload is done:
% Error: Code file transfer failed - Error while writing output file
*Dec 11 15:11:45.514: %TFTP-3-FILE_WRITE_FAIL: tftp_client.c:517 Error while writing 512 bytes to file. Tftp error.
*Dec 11 15:11:45.514: %TFTP-3-WRITE_NOCLOSE_FAIL: tftp_client.c:147 Error while writing the local file: No space left on device
*Dec 11 15:11:45.514: %OSAPI-3-FILE_WRITENOCLOSE_FAILED: osapi_file.c:582 Failed to write 512 bytes (FileDesc:64). file write no close failed
View 6 Replies
View Related
May 13, 2013
Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
wdr3500 problem with usb external hard drive when I try to transfer files from computer to usb on the router it'll work for small files like MP3. But files like MKV where they can be 1-2gb will cause a disconnect and fail to transfer the file. The whole drive would disconnect and windows will give an I/O error.
View 8 Replies
View Related
Nov 3, 2012
This is another E3000 "connection drops" thread. Some background: I have two E3000's that are cascaded. The main router is in my basement connected to my cable modem and is my DHCP server. The second one is on the main floor and provides my wireless signal (no DHCP, and is hard connected to the main router).I have lots of connection drops with the wireless router on the main floor. Lately I have noticed a trend, though. My connection drops mostly when I browse my network (usually browsing pictures on another computer) or when large files or videos are being transferred. If I connect a cable, I have no problems. When wireless, I have signal drops.I have tried every trick and tip that I've seen on this forum or been provided in the Linksys FAQ. I've changed the beacon interval, fragmentation threshold to 2306 and CTS to 2307, I've tried changing channels, I've checked and unchecked boxes for NAT, Filters, etc. I've tried different combinations of WPA2 passwords. I've tried dynamic routing, static routing, blah blah blah...
When I set the 5Ghz channel to Auto(DFS) it defaults to channel 36 and 144Mbps. When I use other channels, I get 300Mbps. Either way, my connections still drops.
I have the latest firmware 1.0.04 Build 6.I even have the router sitting on top of a laptop cooling pad to keep it cool.No matter what I do, as soon as I start browsing my network the wireless connection drops.I am so frustrated! I upgraded my WRT-160N to this E-300 router to get the faster speed and dual band but have had nothing but trouble. I never had a connection drop with my 160N.
EDIT: I notice that when my signal drops, I can see the power LED blinking on the router, like it's going through a reboot cycle.
View 9 Replies
View Related
Feb 19, 2013
I have 4 - WAP 321's in an office all connected to a POE gigabit switch. Each WAP shows connected at 1GB but when I am sitting within a couple feet of the WAP and attempt to transfer a 972MB file it takes around 9 minutes to complete. speeding this up? All 4 AP's are setup as a cluster as well.
View 1 Replies
View Related
Jan 31, 2013
I currently had 6 WAP321 setup in our work environment on 2 floor building as Single Point Setup cluster. When I do a 470MB ISO files transfer between the server and the laptop, the speed is very slow, rate at 130KBs and sometime it go up to 30Mbps.Is there anyway to tweek teh WAP to get FULL speed of wireless all the time?
View 5 Replies
View Related
Apr 9, 2011
I'm having problem with slow wireless trasnfer speeds. 129kb/s slow. So here is my set up. Desktop with a 100MB nic card, running windows 7 ultimate, connected to linksys wrt320n running dd-wrt. then i have my laptop running windows 7 ultimate, connected to my wireless network.
I have tried coping files in the homegroup and outside of the homegroup.
View 9 Replies
View Related
Dec 25, 2011
I am using a DIR 825 and I experience slow data transfer speed within my internal network under the wireless connection (2.4 Ghz), 2 Mbs. I can videostream from the internet OK, no problems there, but when I want to transfer data between two external HDD (NAS devices) it can get as slow as 2 Mbs.
View 1 Replies
View Related
Dec 4, 2011
I recently bought a new TP-Link TL-WR741N, I'm transferring data from my desktop wired network, windows 7 to net book windows xp wireless. i'm getting only 2 mbps.
View 3 Replies
View Related
Oct 16, 2012
IPsec VPN configured between ASA5525-X and Linksys RV042 ,While transfering some exe from ASA5525-X side to Linksys RV042 side over VPN hash-sum of this file changes, so, when you open transferred file, you have an error message "File is corrupted". If you try to transfer file from Linksys side, hash-sum is ok. Also, work with oracle application is interrupted because of unknown reason. IPsec works only if using router instead of ASA.
View 2 Replies
View Related
Sep 26, 2011
I have a laptop and a desktop pc both connected to the same wifi network, both running win 7. File transfers are not quick enough for my liking over wifi so when I need to move a few files about I tend to hook the two together with an ethernet cable. When I try to copy a file however it defaults to using the wireless connection. I'm getting around this at the moment by just turning the wifi off on the laptop while I do the transfers but it would be nice to not have to.
View 1 Replies
View Related
Jun 2, 2012
I am transferring music files from an External HDD link by USB to my laptop to a Synology 410J NAS, I have both a wired and a wireless connection. The NAS is connected to a 2wire modem and router, and so is the laptop. I am getting speeds of between 450KB to 600KB a second i.e. 0.45 to 0.6MB per second. How can I make this faster?
View 1 Replies
View Related
Jun 29, 2011
My transfer speed from HDD which connected to linksys e4200 reach max 2,3MB/s how it is possible to watch fullHD movie if its required minimum 5MB/s? Maybe I should make some adjustments? HDD-WD My Passport 750Gb Also connection speed max reach 144mb/s?? how to make 300mb/s ? wifi adapter is Intel advanced N + WiMax 6250 AGN last driver installed, also E4200 last firmware installed 1.0.0.2 all settings by default Max download speed 75Mb/s by utorrent but provider gives 100Mb/s By cable its ok, max speed 100Mb/s as giving provider
View 9 Replies
View Related
Dec 27, 2012
I have a home network running on a Linksys WAG320n and i have attached to it a WD MyBookLive (w Gigabit Ethernet). I am connected on the network via my Dell with a Intel(R) WiFi Link 5300 AGN. I am not able though to connect on N range. I have installed the latest drivers from Intel but nothing changed. When i try to copy a file from my computer to the WD Network drive the transfer rates are very slow. I get Max 2MB/s - 3MB/s while if i connect my computer with a wire the speed goes up by 3-4 times more.
View 5 Replies
View Related
