Belkin Routers :: N750 Router Rebooting Every Few Hours For No Reason
Nov 29, 2012
I have an N750 DB router and it has been rebooting every few hours for no reason. This has just started happening about 4 days ago. I don't know why but when I check the system logs its filled with the following. [code]
I purchased a new BelkinN750 DB router on 2/12/2013. It seems to think the date is Jan. 1 1970. How can i fix this problem or should I just return it and buy another brand?
N750 DB USB printer not connecting. I'm currently running a Canon MP480 multi-purpose printer connected through USB to the N750 DB router. I have both the printer driver and Belkin USB Print and Storage Manager software installed on a desktop PC that connects wirelessly to the router. The Belkin print manager software "sees" the printer, but when I try to connect it says please install printer drivers. I've installed and re-installed these drivers a few times, with no effects.
My N750 F1103 (f/w 1.10.16) LAN speed is limited to 5Mb why? I upgraded my Internet bandwidth to 20Mb+ tested and found it was only 5Mb, the cable company checked a few things and then I did some diagnostics and Isolated to the N750. I have two wired PC and same results with both PC's. This is supposed to have Giga bit LAN not Giggle bit LAN! I'm paying for something I cannot used to its full potential.
I have a N750 and I want to change the IP address through the browser. It is the standard 192.168.2.1 config. I change the IP to 192.168.15.x while hard wired and hit apply. The router reboots but still holds the same IP.
I cannot airprint. Contacted email support. Followed instructions to reset router. I did and I was able to print from my iPhone. ONCE. Then I installed my SSID and passwords and WIFI setup again and now I can't print. I have a brand-new airprint equipped HP 7520, an iPhone and 2 iPads.that I want to print from....the router is a N750 AV bought in July.
I've mounted a IPSec G2G tunnel with Cisco ASA one end & Cisco router 1802 another end. The 1802 is connected to a BT 2wire Gateway Router to join the BT network. But from time to time, the tunnel goes down for several hours (or several minutes) then goes up again without reason.I've checked the IPSec configuration, it seems correct. Anyone has experience on the BT 2wire Gateway Router ?
I have a belkin N750 DB router. I recently upgraded by internet service from 15Mbp to 30Mbp. If I connect my computer directly to the cable modem, I get 30Mbp throughput. However, if I connect the modem to the router my speed drops to 15Mbp. How do I get the router to support 30Mbp?
My N750, F9K1103 v1, with the latest firmware, 1.10.16n (2012/12/12 3:46:9), does not recognize the external hard drive when I plug it in. My USB printer works great, but not the hard drive.
Belkin N750 Part # F9K1103 v1000 disconnects me randomly. It's get really annoying do to I keep having to re-log into a session after disconnecting etc.
My ISP is Comcast and I own a Belkin N750 DBWireless N+ Router, I have a Synology NAS drive wired to the router. I am trying to set up the network configuration on the NAS drive so I can have internet access to the drive. My question is do I manually define the IP address, subnet mask, DNS, and gateway or do I select DHCP. If so what addresses should I use the address of the NAS drive form the router or the router address. I think I need to use the manual fields and use a static IP but do I get that IP address from the router or from my ISP (comcast)?
I have a n750 and I did the firmware update on the router and I have it check for firmware updates when I log in and i keep getting this message: "Cannot connect to the firmware information server,please double check the WAN connection." I have access to the internet.
I cannot install the printer drivers manually (HP Deskjet 970 CSE) onto my Belkin N750 DB router. The USB Print and Storage Manager does not appear on my computer
How do I utilize the dual band feature on my belkin N750 DB? Do I have to set up two separate networks? Even then how when my devices PC, iPod, gaming devices are only recognizing the 2.4GHz band network?
How can I update my router if my Internet won't work with the router connected? Right now my Ethernet line is going directly from my PC to my modem. Belkin N750.
I just bought a N750 DB router. On boot up, the 5Ghz side will show up for about 20-30 seconds and then it just "disappears". I was even able to connect to it @ 300mb with my laptop. The 2.4Ghz shows up just fine.
I have a Western Digital Mybooklive 3Tb hard drive connected to my N750 wireless router. It works fine, except that the new Media Server and the USB print and storage center says there are no USB devices plugged into it! Why is this?
Why My Belkin Router F5D8236-4 Ver 2 always rebooting itself. the router lamp is on and then the security lamp is on and then the router rebooting itself. this happening because im push the reset button. im already try to upgrade the firmware with recovering tool (Boot Loader / Tiny Kernel Version v0.02) from 192.168.2.1 but the problem still happening.
Belkin N750 Router - wired connection can not access Internet. I've tried direct to modem and have no problem, have tried old router, no problem, but if I shut down desktop completely (Win7) and restart, I get no connection. Uninstalling the NIC (Intel 82579V Giga) and restarting, then I get connection again. However, if I start in safe mode with networking, I have no problems at all. I've disabled my firewall to no avail.
Recently switched DSL providers and now have Cisco modem DPC3008. Able to connect to internet directly thru modem. Able to connect wired or wireless to router. Unable to get router to connect to internet via modem. Tried restart, reset, and new set-up. Called ISP (Charter) - no way, said contact Belkin.
I have a Belkin N750 router which I purchased because the box said it had filtering options. I didn't realize that the filtering was only sites that Norton kept track of. There are certain adware sites I know about that I would like to filter. Possible with this router?
I have an issue with my N750 Wireless router, F9K1103. I have a Windows Home Server, HP Media Smart Server – EX470, that at times causes the router to lose connection, with the front panel light going from Blue (connected) to Orange (disconnected). When I pull the net cable from the server, after about 30 seconds the blue light comes back on.
I would like to upgrade my older router to a new one that I can connect my laser printer and storage via USB. I was looking at the Belkin N750, but it seems to get bad reviews. Is there another router that someone would recommend that has 2 USB ports (one for printer and one for storage)?
I am having trouble keeping a stable internet connection when connecting through the router. I am on my third new router in one week thinking it was a router issue but I don't think so anymore. I am on cable internet using a motorola surfboard modem. The router I bought is a Belkin N750. I also tried a Cisco E1200 and EA2700 with no luck. I have been on the phone with support for probably ten hours total and tried all of their settings to no avail.
So i got time warner cable and internet but for some odd reason a "wired" connection works perfectly fine but i cannot get any life out of my belkin n750 DB wireless router. ive hooked it all up modem to router to pc nothing so i reset everything still nothing