Cisco VPN :: RV082 Connecting A Network Printer To Access Over VPN

May 15, 2011

I have recenly installed a RV082 with two ADSL modems connected to Broadband lines. Access to our networks is done via VPN accounts configured on Windows Vista laptops. The VPN network works fine and everyone has access to their network data and the Intranet/Internet.
 
I'm having problems with connecting a network printer to access over the VPN. We have managed to get a IBM1532 network printer working using the following network details by allowing the IP address of the printer through our VPN network/firewall.
 
We had to connect a Xerox C2424 workstation printer on site, so we configured the device using the same network details as the IBM printer, connected it to one of the available ports on one of the Broadband modems but we could not get the printer to be seen or connected to using this setup.
 
However I connect  my own Home Laptop PC configured with the IP port settings above directly to the same modem as the Xerox printer this works but only after we changed the IP gateway address on the printer to match the modem.
 
If I switch on DHCP on the printer it finds the IP gateway address of the RV082 but will not allow us to send anything to it.As the ADSL lines are on a Dynamic IP rather than Static.

View 2 Replies


ADVERTISEMENT

Cisco Routers :: Unable To Connect To Network Printer Through RV082

Oct 2, 2011

I installed a RV082 at my remote branch and I successfully created a VPN tunnel to my ASA5510 at our core data center.
 
The PC's that I plug into any of the 8 ports are working fine. However, when I plug in a network printer, it does not work from the network, only from a PC that is also plugged into the RV082, basically locally, using TCPIP
 
From our data center, I can ping the printer, but the printer shows 'Off-Line'. I even tried to add a TCPIP port, in the printer setup, and it does not see it.

View 1 Replies View Related

IP4820 Connecting Printer For Wireless Access

Jun 26, 2012

I have a iP4820, Canon printer that has a USB port and a pictbridge port. It is currently connected to my desktop vis the USB port. Is there anyway I can connect the printer to the Belkin wireless router so that I can print from my laptops as well as my desktop?

View 1 Replies View Related

Connecting To Printer That Is On Another Network?

Jan 23, 2013

We have a Verizon T1 line providing internet for our backoffice network. On this network, we have 4 network printers that are shared between the facility. We recently opted to go with new web based software that neccesitates a high speed internet connection, and 12 wireless devices across the building. We signed a contract with Comcast Business Class internet, so that in the event of an external failure with one ISP, we would have the other offer redundancy with the new wireless router.It has now become clear that our nurses that are on the Comcast wireless network, now need to print from their wireless devices regularly. At the time this is obviously not possible, because the network printers are only on our backoffice network. Buying a wireless inkjet printer is out of the question. How can I make this happen? All of the printers have a local static IP on our backoffice network (Verizon). I have heard of software that will essentially send the print job to another computer, which would relay the print job to the designated printer.

View 1 Replies View Related

Connecting To Printer On Network?

Jul 13, 2012

I have; iMac connected to Netgear DG834G router with ethernet cable and epson RX620 printer connected with USB cable/ Laptop running windows XP Media edition which connects ok to network and printer works ok too.Now have new HP desktop running Windows 7 64-bit. I have tried installing vista driver for printer, as per epson site,but I cannot get the printer to work wirelessly over the network.

View 3 Replies View Related

Belkin Router Printer Not Connecting - Access Blocked?

Nov 2, 2012

Uninstalled McAfee. Installed Frontier Secure, which uses the Windows Firewall. Received Windows Security Alert message that my Belkin USB Storage Center (where the printer is listed) was being blocked, and would I like to allow access. I selected "Allow Access". Printer has not been connecting all week. No error messages - it tries to connect, and then just stops. Can't find issues with the router or the printer - only with the firewall. Everything looks the way I assume it should - the printer is listed in the Belkin storage center. The Belkin storage center is listed in the firewall. There is no tech support for the firewall. There is no tech support for the printer.

View 4 Replies View Related

Connecting Printer To Computer Via Network?

Nov 26, 2012

i have 2 printer one is connected through usb, i want to connect one more printer through lan using switch....how to connect?

View 3 Replies View Related

Connecting A Network Printer P4015n?

Mar 21, 2012

I would like to know how to install and connect my HP laser jet p4015n

View 1 Replies View Related

Connecting Wireless Printer To Network?

Jan 18, 2013

We have printers connected to the network, but I need a standalone printer connected to my workstation due to the confidential nature of some of my printing.I chose a small wireless printer as I already am being strangled with wires and cables.I went thru the wireless installation, and was told to connect PC to printer via USB.I finally got a connection, but not the one I wanted. We also have a wireless router, but connecting to itI got message saying "a connection was made but your PC is not connected to your printer".

View 5 Replies View Related

Home Network :: Connecting PCs On Different Subsets To Network Printer?

Jul 1, 2012

I'm running into an issue with allowing all the PCs to use the one printer connected to devpc. I have a westell 7500 from CenturyLink and a Belkin Wireless G router. This is the layout:

View 6 Replies View Related

Connecting A HP 9000dn Printer To Home Network?

Oct 29, 2011

I'm having issues connecting a HP 9000dn printer to my home network. I have windows 7 x64 with a Belkin wireless router. I have the printer (via a jetdriect 615n driver) connected to my router and the computer will not see the printer. I'm a newbie to networking

View 3 Replies View Related

Connecting A Wired Network AR-M450 Printer Wirelessly?

Mar 3, 2012

My buddy just purchased a Sharp AR-M450 multifunction printer for his small business and it has the optional network card. He wants to take advantage of the network printing capabilities but we want to avoid having to run an ethernet cable from the printer to the wireless router. The entire network is wireless because running cables would be a huge pain in the building he is in. What could we use to connect the printer to the network without running cables?

View 1 Replies View Related

Home Network :: Connecting Local Printer And VPN Client Software Enabled PC?

Dec 11, 2012

i use cisco vpn client software to connect my laptop to my company's network when i at home. using dsl modem.

i wonder if it is technically possible to connect my local printer to dsl router and in such a way establish connection between my laptop and printer?

View 5 Replies View Related

Access Internet Using Wireless Network And Printer Using Separate Wired Network At Time?

Apr 4, 2012

I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?

View 7 Replies View Related

How To Access Network Printer Remotely In Domain Network

Mar 29, 2011

i want to know how to access printer remotely,mean when the user is not in the network. .in domain network

View 1 Replies View Related

Cisco Routers :: RV082 - Site Not Connecting To DNS Server?

Aug 21, 2012

We use the RV082 at some our sites. One particular site will not connect to the DNS server but all others will. I've checked every setting I can think of with no joy.               

View 2 Replies View Related

How To Access Network Printer From Wireless Macintosh

Feb 24, 2012

I am using a Macintosh (Lion) on a wireless network. I want to print to a printer on land line ethernet. I have the printer's IP address. I attempted to add the printer on the Macintosh using first LPD protocol and then IPP protocol. Neither worked.I chose Autoselect to select the driver and it would revert to Generic PostScript Printer.When I selected Add, screen said "Setting up " with the IP address for a while and then said "Unable to verify the printer on your network"

View 4 Replies View Related

Can't Access Canon MP495 Printer Through Network

Apr 17, 2012

My Canon MP495 3-in-1 inkjet XPS printer is connected through my mother's computer, and up until a few days ago I was able to print from it through our Home network. My mother can still print from it directly, so it is not a hardware issue. On my computer when I go to print, underneath the printer selection it says server offline. I have checked both computers and they are both on the Home network with all sharing options on. I can see her media and documents from my computer and she can see mine vise-versa. When I open the Network and Sharing Center and view the full network map, my mother's computer runs to a question mark then to the router, while mine is shown to be fine. When you click on the router within the map it brings up a page saying "Important Update. To avoid a conflict with your Internet Service Provider, your router's IP address has been updated to 10.0.0.1. You must now update the IP addresses in your router's configuration settings for each relevant service,such as port forwarding and IP address reservation." I do not know if this is the problem and it is starting to go beyond my realm of understanding. Also, possibly related, we had a bad storm that did NOT knock our power out, but the internet went down and we had to reboot the modems. This occurred right before the problems began. Last piece of information: We are going through 2 routers due to lack of jacks in the house. The line goes through the first router which connects to a second one in the back of the house. Both computers are linked to the second router, and it is the second router which shows on the network map. I go to an online college and it is necessary for me to access the printer.

View 7 Replies View Related

HL-2250DN / Remote Access For Network Printer

Jun 27, 2013

I have a network printer (HL-2250DN) that I want to also reach from outside the home network. In the network it is reachable by 192.168.0.103 Now I used a DNS service to map my external IP to a domain name. How can I now access my printer? myprinter.no-ip.org is mapping to my external ip. But how can I forward this to my printer?On my router I'm forwarding port 80, 631 and 646 for the IP 192.168.0.103. But still it is not working.

View 1 Replies View Related

HL-2250DN - Remote Access For Network Printer

Sep 5, 2011

I have a network printer (HL-2250DN) that I want to also reach from outside the home network. In the network it is reachable by 192.168.0.103

Now I used a DNS service to map my external IP to a domain name. How can I now access my printer? myprinter.no-ip.org is mapping to my external ip. But how can I forward this to my printer?$

On my router I'm forwarding port 80, 631 and 646 for the IP 192.168.0.103. But still it is not working. W

View 4 Replies View Related

Wireless :: Connecting Printer To Wireless Network?

Oct 11, 2011

We have a Brothers 7820N Printer and would like to connect it to our wireless network.

View 1 Replies View Related

Routers / Switches :: Netgear Fs605 Ethernet - Wifi Printer Access In Network?

Apr 5, 2013

I use a Netgear FS605 Ethernet Switch to connect a wifi modem to my network and thus to the internet. People in that room can jump online via the wifi modem. You can also print to the wireless printer in that room via that wifi modem being local. However, I can no longer print to the wifi printer from anywhere else in my network (I could before I got a new router and wifi modem in there).Would this be a problem with this Switch or with the modem e.g.

View 1 Replies View Related

Linksys Access Point :: WAP610N - WLAN Printer Network / DHCP Server?

Oct 27, 2011

I use the WAP610N as an Accesspoint for only an small Mobilephone to WLAN Printer Network.My big Problem is that i have therefore no DHCP Server in this special small WLAN Network.And now i need an own DHCP Server from the Accesspoint side because otherwise i must use static IP Adresses in all Mobilephones to connect with the WLAN Network .In the WAP610 unfortunately there is only the choose between static IP Adress and IP Adress FROM an existing DHCP server .

View 2 Replies View Related

Home Network :: Connecting 2 Network To Access NAS?

Apr 9, 2013

I split my network into 2 to make it more accessible during peak time and to minimize internet traffic. However by doing this only the first network can access our Network Access Storage, the other network can access it because the two are separated by different router and switch also the supervisor need to see both network at the same time for monitoring purposes..

View 6 Replies View Related

Canon MF8300 Printer - Unable To Locate Printer On Network

Mar 21, 2011

I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.

I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.

View 15 Replies View Related

Cisco VPN :: ASA 5505s - Computer Network Connecting To Remote Access Setup

Dec 4, 2012

I am looking up setting a VPN using ASA 5505s so we can connect a mobile network of computers to our base network of computers. The base network has a static public IP address, but the mobile site will not. I was thinking of using a remote access VPN setup, but I am unsure if I can have a network of computers connecting in to the remote access VPN setup.

View 5 Replies View Related

Connecting One Printer On Two Networks?

Jul 1, 2012

So basically I need to hook up a HP LaserJet P2015 to a business and home network. LaserJet P2015 user guide. I would like to keep the printer's ip static so it will stay the same on each network individually. am using a business router (Linksys RV120 W Wirless-N VPN Firewall) with two VLAN (business and home network) built using this router. Also I have two access points both being used to expand this signal through out the building, but not as an extender. They are two Linksys WAP54G access points. The access points are used to expand the home network, and not the business network.

View 1 Replies View Related

Cisco Routers :: Connecting Two RV082 Back To Back

Jan 7, 2013

I'm looking for instructions on how to setup and connect two RV082 routers together with a crossover cable between their WAN ports. This is to connect two separate LANS together via an ethernet connection. For staging we are setting everything up with a crossover cable in our shop.  Ultimately the crossover cable will be replaced by a microwave link between the two LANS several miles apart.  There will be no internet connection.

View 7 Replies View Related

Cisco Firewall :: Unable To Access Remote Network After Connecting ASA 5510 And 5505

Sep 24, 2011

I am using two firewalls to connect two different offices. Firewall 5510 is running ASDM 6.3 and 5505 is running ASDM 6.2, Problem is that even after connecting two sites, i am unable to ping remote network from either side. I am mentioned static route as tunneled.

View 1 Replies View Related

Linksys Wired Router :: RV082 Gateway To Gateway VPN Not Connecting?

Jan 24, 2012

I recently swapped out an RV082 with a newer model (still RV082 but black and a different interface). I configured the Gateway to Gateway VPN exactly as it was before but none of the three other RV082's will connect. I have tried deleting the connections several times to no avail. I have aggressive mode disabled and have tried with the firewall on and off. Below are the settings (IP's have been X'd out) and the log.

Settings:
IP OnlyIP Address : X0X.X0X.20.31Local Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask :  Remote Group Setup
Remote Security Gateway Type : IP OnlyIP AddressIP by DNS Resolved : Remote Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : AES-192AES-256AES-128 AES-192AES-256  AES-128 IPSec Setup3DES  Keying Mode : ManualIKE with Preshared keyPhase 1 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 1 Encryption : DES Phase 1 Authentication : MD5SHA1Phase 1 SA Life Time : secondsPerfect Forward Secrecy : Phase 2 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 2 Encryption : NULLDES3DES Phase 2 Authentication : NULLMD5SHA1Phase 2 SA Life Time : secondsPreshared Key : Minimum Preshared Key Complexity : EnableLOG:

[code].....

View 1 Replies View Related

Connecting USB Printer To Wireless Router?

Sep 27, 2011

I have a new n series Belnet wireless router that can take a usb printer. I have a Lexmark 2200 Series 1 Printer (with usb connection). I have used this printer with my laptop (runs Windows xp) by connecting the printer usb directly. I have also connected my laptop to the wireless router. I have plugged the printer into the wireless router's usb port. Is it possible to access the printer this way? I do not know what I should do next. The laptop cannot access the printer through the wireless.

View 5 Replies View Related

Connecting To A Printer From A Remote Desktop?

Mar 14, 2012

My problem is when i try and connect a printer from windows 7 that is connected to a local pc via usb onto a remote desktop it doesnt connect but when i try and connect from wins xp it does. On the remote desktop i click to add a printer and then i select network printer. Then i type\ip-address-of-pcprinter share name. It says it cannot connect to printer but when i try this method on an xp computer it accepts it.

View 6 Replies View Related

Routers / Switches :: Connecting A Printer To Two Different Modem?

Apr 23, 2012

Currently I have 2 different modem running in my working area which is modem A and modem B. Whenever user from Modem A(192.168.0.1) or Modem B(192.168.0.10) would like to print or scan something using the shared printer, I need to manually plug the cable into either Modem A or Modem B depends on the network the user are currently using.How I do previously is only set DHCP on Modem A and disable DHCP for modem B so that Modem B will share DHCP assigned by Modem A. Both modems connect to the same Switch with the printer cable so both network user can use it together.But the problem now is I have to enable DHCP for both modems and causing the previously method can't be use anymore. So is there any other way that I can link both Modem A and Modem B with each assign different DHCP to link with 1

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved