Cisco :: VPN Tunnel Monitoring In LMS 4.0
Apr 11, 2011is there a way in LMS 4.0 to generate a notification when a VPN tunnel drops on an ASA 5500?
View 1 Replies
ADVERTISEMENT
Cisco VPN :: VPN Tunnel Monitoring With 2821
Nov 7, 2010We have around 20 VPN tunnel via Cisco Router 2821 (Intranet) and around 30 VPN tunnel via Cisco ASA (Internet) with 3rd Parties/Vendors.I wanna know if there is any monitoring tools from Cisco or any others providers who can give me information/trend report about VPN tunnel Up/Down time, Volumns of Traffic, Protocols etc.
View 2 Replies View RelatedCisco Firewall :: ASA 5505 / SNMP Monitoring Over VPN Tunnel?
Mar 27, 2008I am trying to monitor my ASA 5505. This asa is connect via a ip-sec tunnel to our network. I have no problems with snmp monitoring devices behind the ASA, but when trying to monitor the asa itself I do not get a SNMP response.
View 2 Replies View RelatedCisco VPN :: 5520 - Monitoring IPSec Tunnel Bandwidth Utilization
Sep 8, 2011We have a Cisco ASA 5520 supporting multiple VPNs - both remote-access and Lan-to-Lan. We would like to monitor the bandwidth utilization of the IPSec Lan-to-Lan tunnels.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ASA 5505 - Procedure For Monitoring Site-to-site VPN Tunnel?
Apr 30, 2012Need to know the step by step procedure for monitoring site-to-site VPN tunnel (up/down) using SNMP on Cisco ASA 5505.
View 1 Replies View RelatedCisco WAN :: 7201 Option To Send All Traffic Through GRE Tunnel / L2TPV3 Tunnel
Jan 9, 2011i have a 7201 router with NPE-G2. i have a design which i have the option to send all the traffic through a GRE tunnel or a L2TPV3 tunnel.which method is more CPU consumption ?
View 1 Replies View RelatedCisco WAN :: 1941 Router - Enable IPSec Virtual Tunnel Interface With Tunnel Mode IPv4
Sep 23, 2012I'm in process of purchasing a new Cisco routers for our branches that will be used primary to enable IPSec virtual tunnel interfce with "tunnel mode ipsec ipv4". does the default IOS IP Base supports this feature? or i need to purchase DATA license or SECURITY license?
View 4 Replies View RelatedCisco Routers :: Set A VPN IpSec Tunnel GW To GW Tunnel Between RV110W
Oct 17, 2012I am using a Cisco RV110W (Firmware 1.2.09) in a branch and I would like to create a VPN Tunnel to another site that has a Cisco RV042 (firmware v4.2.1.02)
What would be the correct Configuration? the current configuration I am using is
in the RV042 i am using
Check Enable
Local Group Setup
Local Security Gateway Type : IP Only
IP Address : RV042 Pulbic IP address
[Code].....
Networking :: To Tunnel All Routers Traffic Through SSH Tunnel With WRT300n
Jul 24, 2012Environment :linksys wrt300n v1.1 which can have ddwrt-mega. Willing to tunnel all lan's outbound traffic through an ssh tunnel.
View 2 Replies View RelatedCisco VPN :: Tunnel With WRVS4400N Need To Push 2 IPs Through Tunnel?
Jan 23, 2012There are a few situations were I'd like to be able to use the locally configured account on a device but still have ACS in place.I want to complete this WITHOUT adding the locally configured account into ACS.I have tried setting the advanced option under Identity for if an account is not found to "Continue" however this causes the account to be allowed as long as a password is typed (any password, as long as its not blank).
View 2 Replies View RelatedCisco :: DCNM 6.2(1) Not Monitoring VPC-s
May 12, 2013I have installed DCNM 6.2(1) on red hat 5.5 64bit and installed 4 evaluation (advanced) licenses on dcnm server:
DCNM-LAN-N3K-K9-EVAL
DCNM-LAN-N5K-K9-EVAL
DCNM-SAN-N5K-K9-EVAL
DCNM-SAN-M91-K9-EVAL
Licenses are activated on a total of 31 devices (nexus 5000 and 3000 series), data is being monitored, graphics are drawn. However under the Web user interface of DCNM, under Health, Virtual Port Channels (vPC) no data is shown. Performance, vPC is also empty. No vPC errors/notifications are displayed. The installed advanced-eval licenses should support all the bells and whistles (including vPC), but still- no monitoring is done about vPC-s. vPC-s are up and active. network is discovered and monitored via snmp v2c only. could this be limiting vPC discovery- needing snmpv3/ssh access?
Cisco :: Monitoring ASR 1002 With IOS-XE In IPM 4.2
Oct 26, 2011We are running LMS 3.2 with IPM 4.2 installed....and we are looking to do IPSLA monitoring on a couple of our Cisco ASR's with IOS-XE code installed.
I looked at the IPSLA feature mapping and it only talks about supported IOS code....do we need to upgrade our current IPM module to a current version?
Cisco :: MIB For Monitoring Temperature On 800
Sep 17, 2012if there is a MIB for monitoring temperature on a Cisco 800?
View 2 Replies View RelatedCisco :: ASA Monitoring Logical Interfaces
May 12, 2011Does any know why the ASA will monitor physical interfaces by default, but monitoring of logical interfaces is disabled by default? Or better yet, is anybody doing a monitor-interface for a subint without issue? I'd imagine it isn't enabled by default for a reason.
View 2 Replies View RelatedCisco :: ASR1000 Monitoring NAT Using Netflow 9
Feb 7, 2010I have a question regarding netflow and NAT. I have read some documentation (on ASR1000) regarding monitoring NAT process on Cisco ASR1000 that can be done using netflow version 9 (the term was called netflow event logging a.k.a NEL). The problem is, I have not found the netflow collector that can do that. I have queried several software such as manage engine "Netflow Analyzer" and Lancope, but they said their software can not do that.
View 11 Replies View RelatedCisco :: Srp527 Vpn Monitoring Setup
Feb 9, 2012I am trying to setup VPN monitoring for a srp527w Cisco.This is my first attempt at this so "easy to understand" instructions would be a great, i have done some searching and its difficult to decipher relevant and irrelevant information based on my limited exposure to this technology.
View 1 Replies View RelatedCisco VPN :: VPN Tunnels Monitoring On ASA5510 With IOS 7.0
Jul 8, 2012VPN Tunnels Monitoring on ASA5510 with IOS 7.0 (Monitoring through Nagios Server).I want to use Nagios to monitor each of the S2S Tunnels built on ASA 5510. I can use the icmp on Nagios by adding Nagios host in IPSEC network of each tunnel but in that case the change needs to be done at other end of Tunnel as well.
View 2 Replies View RelatedCisco :: Prime LMS 4.1 License For Monitoring
Jan 16, 2012I am proposing the Cisco Prime LMS 4.1 (i.e LMS-4.1-500-K9); Do I need to add the HUM license for monitoring or does that come inbuilt?
View 1 Replies View RelatedCisco Firewall :: Bandwidth Monitoring In PIX 535?
Sep 25, 2011Is there a way I can generate bandwidth reports on Cisco PIX 535 ?
View 1 Replies View RelatedCisco :: WLC 5500 Management And Monitoring?
May 11, 2011we are looking forward to monitoring the cpu, environment variables and the memory of a wireless lan controller via snmp. but we are not able to find in the mibs the right oid to manage this.can the exact oid be given in order to monitor these three elements on a cisco WLC 5500 series.
View 1 Replies View RelatedCisco VPN :: ASA 5520 - Monitoring SSL Connections
Sep 12, 2012On the ASA5520 we would like to create a report that gives us trending over 6 monthes for the amount of people logged in via the SSL VPN and for how long. Is there a way to do this on the ASA5520? Does it have this ability? Could I do this in SolarWinds? My boss mentioned a software package that Cisco has that will show a history - is this correct?
View 1 Replies View RelatedCisco WAN :: 3560 SLA Monitoring In Switch
Jun 26, 2011How to configure SLA monitoring in 3560 switch. I have 2 DSL links terminating in switch and want to do WAN failover. I know how to do in ASA and router. I found IP SLA and track commands on switch but don't know exactly how to use them.
View 2 Replies View RelatedCisco :: Monitoring 3g Data Usage On 887?
Oct 28, 2012Have a problem coming my way with regards monitoring 3g data usage on an 887 router. The router will carry two links - x1 primary over the serial port and x1 secondary failover link utilizing 3g.
The 3g sim has an allowance of 1Gb per month (traffic has been baselined and this seems sufficient - not by me though).I have a requirement to monitor the 3g link and trigger an alert at say the 60% mark (600Mb). Whatever mechanism is used to count the data also has to reset to 0 at the beginning of every month as data stats will be included in monthly reports.
Second conundrum, I also have to somehow split out the data usage stats to show my customers usage as well as my own. My own being management traffic (mainly snmp and icmp) and present this in the monthly report.
#1 - Does the 887 have some form of 3g accounting capability either via gui or cli that can fulfil my requirements above?
#2 - With splitting the data usage stats, could this be achieved using netflow and if it was possible, could i only have my flows sent down the Primary link (obviously only when it is active) and if the box fails to 3g have netflow just count the data until the Primary kicks in again.If no built in features can give me what i want i my go down the eem scripting route burt this is a last resort.
Cisco :: LMS 4.2.2 Device Interface Monitoring?
Sep 17, 2012On LMS 3.2 there was a way to disable the monitoring of Device Interfaces.Examples are ISDN30 Channels, which go up and down during calls. I could disable the channel monitor on the relevant device and only monitor the Circuit as this is the main device to monitor.I can not find the same option in 4.2.2
View 2 Replies View RelatedCisco Firewall :: IP SLA Monitoring On ASA Version 7.0 (6)?
Dec 20, 2011how to configure ip sla monitoring on asa ver 7.0 (6) ?
View 4 Replies View RelatedCisco Application :: PAT Limits And Monitoring - ACE 20?
Dec 14, 2011How to confirm the PAT limit on the ACE-20s. I initially read it as 1 million (the NAT limit), however I have since read that for PAT, its 4 million as it uses the connection record information and not xlate.
I've always wondered why the xlate line under 'show resource usage' is zero. If PAT does use the connection record then this would explain why, however its confusing as when running a 'show xlate' command you do see all the current PAT entries.
Cisco :: LMS 4.0 Interface Utilization / Monitoring?
Jul 18, 2011LMS is not reporting on all of my interfaces, utilization in particular. As an example, I have 1 location that is connected via DMVPN tunnels, when I run a utilization report, it only comes back with information for 1 interface, a random interface, port FA 1/7 on the switch module. If it was all of the switchports it might make more sense.
In DFM device detail the interfaces are being managed.
In the Link Utilization Poller, only 1 interface is listed (FA 1/7).
Cisco AAA/Identity/Nac :: ACS 5.2 - Monitoring And Reports?
Apr 3, 2012We're currently running on ACS 5.2.0.26.9 with 2 appliances (one primary and one secondary).Today, I wanted to get some reports from the Monitoring and Reports tool. At beginning, it seemed impossible to generate them. Later, I decided to reload first primary and then secondary. As soon as I've done it, I got an email alert telling me that it failed parsing NAD.
Cisco Secure ACS - Alarm Notification
Severity: Critical
Alarm Name
System Alarm [Collector]
Cause/Trigger
[code]....
I don't really find where I can find the Collector log...Anyway now when I generate a 30 days report, I only get data up to 23.03.2012. Nothing recent !
Monitoring Router Traffic?
Jan 17, 2012We've had problems with our internet router losing connection to the internet. All traffic stops, a reboot resolves the problem. The router only has a public IP and it's connect through a dummy switch to the ASA as shown. I want to be able to monitor netflow or something and wondered if I could add a static route to the 10.x.x.x network and then add the netflow commands. Here is kind of how it looks, I simplified it some by removing unnecessary devices
View 2 Replies View RelatedHow To Prevent Network Monitoring
Feb 21, 2012I live in a shared flat. And all 20 rooms are connected to this switch I believe. Is there any method to prevent the landlord/tech guy monitoring our internet activity (e.g. bandwidith activity, websites we looked at, etc.
View 5 Replies View RelatedNetwork Diagram For 50 PCs With Monitoring
Jan 19, 2013I need A network diagram for 50 PCs with Network monitoring
View 3 Replies View RelatedMonitoring Traffic Going On In Network??
Aug 5, 2012I have a questions about protecting my network. My parent's have rented out my room, since I'm going to college, and I was wondering if there was a way to monitor the traffic that is going on in my network. Once the guy moved in, the wireless connection speed drastically decreased. I was barely able to sure the internet on my laptop. I currently have about 8 devices connected to my network. I am running a wired connection for my desktop so I don't feel any lag, but everything else runs on wifi.
View 1 Replies View RelatedMAC 10.7 Monitoring Available Bandwidth On Network
Jul 18, 2013I was wondering if there is a way to monitor the total bandwidth available at any given time? My ISP claims and is charging me for a certain amount of bandwidth but I suspect that during the day I am getting much less.
I would like to track available bandwidth continuously (or every 5, 10, 15 minutes) and log that data so I can show them the results. I'm on a Mac 10.7 but can use Windows XP also.