Licenses are activated on a total of 31 devices (nexus 5000 and 3000 series), data is being monitored, graphics are drawn. However under the Web user interface of DCNM, under Health, Virtual Port Channels (vPC) no data is shown. Performance, vPC is also empty. No vPC errors/notifications are displayed. The installed advanced-eval licenses should support all the bells and whistles (including vPC), but still- no monitoring is done about vPC-s. vPC-s are up and active. network is discovered and monitored via snmp v2c only. could this be limiting vPC discovery- needing snmpv3/ssh access?
if i have a LMS server the newest version, and i bout Nexus 7K with its DCNM ver 5.2 (DCNM-N7K-K9) can i install the (DCNM-N7K-K9) license on the Cisco Prime LMS 4.1 Base so that i can manage Nexus through LMS?if this works Can I manage all Nexus switches also?
I have installed the new version of DCNM Prime (Version: 6.2(1) and all installation process went well without any error or warning, DCNM SAN client works well I can loggin and manage my MDS and UCS, but I have big issue to run DCNM LAN client after successful logging I have window that freezing and nothing is displayed (see printscreen attachment) I reinstalled several time Java, installed four version different of Java, tried this client from three different PC and still have the same issue.
I have installed DCNM 5.2(2c) on windows box to manage Nexus 7K devices.\ have for the time being one device that i have manage and i see often the following text:Discrepancy in device accounting log,Recommended action: clear the accounting log and discover the device. Device details are not available.How can i delete the accounting log and why do i have this message ?
I've recently installed a Prime DCNM 6.1(2) to a Windows 2008 R2 SP1 64 bit version. It seems to be working fine, apart from the DCNM-LAN client.If I login with the Java client, I got the GUI, however it remains blank - I can see the menu, but no data at all. It seems it cannot cummunicate with the DCNM server. DCNM-SAN client, the WEB client and the Device manager works fine, but I just cannot make this work.Tested it from Win2k3 SP2, Windows 7, and the server itself, with Java 1.6.31, 1.6.37, 1.7.13.
I am unable to discover 2 Nexus 5548 with the SAN client of DCNM 5.2(2e)
These Nexus are used like LAN and SAN switch. Each Nexus is a SAN fabric. I would want to use DCNM in order to configurate the zone/zoneset via GUI. These Nexus 5548 run 5.1(3)N2(1b) release.
The Nexus ARE NOT managed via the Mgmt interface (OOB) but they are managed via an interface vlan (InB)
I could not configure rightly
- the snmp-server user (SNMP user V1/v2 or V3 + group ? ) CLI on Nx
- to configure the discovery in order that DCNM discover each fabric either from web GU interface or java SAN client
It's been discovering a 6513 for over 90 minutes. Is this an expected duration or is something likely malfunctioning or is it just the sheer # of interfaces that it must process? The Nexus 5k's that it has discovered progressed fairly quickly.
I am trying to get our DCNM to discover the 5548. When I put my credentials for that appliance. I get this error .Failed Device x.x.x.x OS Version 5.1(3)N1(1) is not supported . The DCNM version we have is 5.2(1)S74.
we are having trouble logging into the webinterface of our DCNM installation.
(Cisco Prime DCNM 6.1(2), Windows 2008 R2 SP1 64 bit version, US)
Everything seems to be working fine so far, except the login to the webinterface.
When calling https://<SERVER_IP> (we're using 443 and 8443 in our setup), the login page appears. Entering the credentials results in the message "Authentication Failed. Please try again.". We tried that from a remote machine and the server itself and are using local authentication (not RADIUS or LDAP, ...).
On the other hand, when running the DCNM LAN Client (using the same credentials not working for the webinterface), there is a link (see image below: "here") pointing to the webinterface.
if i have just DCNM-N7K-K9 (DCNM for LAN Enterprise License for one Nexus 7000 Chassis) installed on a server, i can manage all nexus switches like 5k and 2k??
We've gotten two Nexus 7009's in and I'm starting to configure them when I found I couldn't add VDCs. I found there was no license installed but the only licenses I found that came with them are "Cisco DCNM for LAN Enterprise Lic for one Nexus 7000 Chassis". So my question is this - do I need to configure a DCNM server to get the license pushed to these two 7009s or should there be another PAK for each chassis that I can register and get my enterprise services?
Does any know why the ASA will monitor physical interfaces by default, but monitoring of logical interfaces is disabled by default? Or better yet, is anybody doing a monitor-interface for a subint without issue? I'd imagine it isn't enabled by default for a reason.
I have a question regarding netflow and NAT. I have read some documentation (on ASR1000) regarding monitoring NAT process on Cisco ASR1000 that can be done using netflow version 9 (the term was called netflow event logging a.k.a NEL). The problem is, I have not found the netflow collector that can do that. I have queried several software such as manage engine "Netflow Analyzer" and Lancope, but they said their software can not do that.
I am trying to setup VPN monitoring for a srp527w Cisco.This is my first attempt at this so "easy to understand" instructions would be a great, i have done some searching and its difficult to decipher relevant and irrelevant information based on my limited exposure to this technology.
VPN Tunnels Monitoring on ASA5510 with IOS 7.0 (Monitoring through Nagios Server).I want to use Nagios to monitor each of the S2S Tunnels built on ASA 5510. I can use the icmp on Nagios by adding Nagios host in IPSEC network of each tunnel but in that case the change needs to be done at other end of Tunnel as well.
We have around 20 VPN tunnel via Cisco Router 2821 (Intranet) and around 30 VPN tunnel via Cisco ASA (Internet) with 3rd Parties/Vendors.I wanna know if there is any monitoring tools from Cisco or any others providers who can give me information/trend report about VPN tunnel Up/Down time, Volumns of Traffic, Protocols etc.
we are looking forward to monitoring the cpu, environment variables and the memory of a wireless lan controller via snmp. but we are not able to find in the mibs the right oid to manage this.can the exact oid be given in order to monitor these three elements on a cisco WLC 5500 series.
On the ASA5520 we would like to create a report that gives us trending over 6 monthes for the amount of people logged in via the SSL VPN and for how long. Is there a way to do this on the ASA5520? Does it have this ability? Could I do this in SolarWinds? My boss mentioned a software package that Cisco has that will show a history - is this correct?
How to configure SLA monitoring in 3560 switch. I have 2 DSL links terminating in switch and want to do WAN failover. I know how to do in ASA and router. I found IP SLA and track commands on switch but don't know exactly how to use them.
Have a problem coming my way with regards monitoring 3g data usage on an 887 router. The router will carry two links - x1 primary over the serial port and x1 secondary failover link utilizing 3g.
The 3g sim has an allowance of 1Gb per month (traffic has been baselined and this seems sufficient - not by me though).I have a requirement to monitor the 3g link and trigger an alert at say the 60% mark (600Mb). Whatever mechanism is used to count the data also has to reset to 0 at the beginning of every month as data stats will be included in monthly reports.
Second conundrum, I also have to somehow split out the data usage stats to show my customers usage as well as my own. My own being management traffic (mainly snmp and icmp) and present this in the monthly report.
#1 - Does the 887 have some form of 3g accounting capability either via gui or cli that can fulfil my requirements above?
#2 - With splitting the data usage stats, could this be achieved using netflow and if it was possible, could i only have my flows sent down the Primary link (obviously only when it is active) and if the box fails to 3g have netflow just count the data until the Primary kicks in again.If no built in features can give me what i want i my go down the eem scripting route burt this is a last resort.
On LMS 3.2 there was a way to disable the monitoring of Device Interfaces.Examples are ISDN30 Channels, which go up and down during calls. I could disable the channel monitor on the relevant device and only monitor the Circuit as this is the main device to monitor.I can not find the same option in 4.2.2
How to confirm the PAT limit on the ACE-20s. I initially read it as 1 million (the NAT limit), however I have since read that for PAT, its 4 million as it uses the connection record information and not xlate.
I've always wondered why the xlate line under 'show resource usage' is zero. If PAT does use the connection record then this would explain why, however its confusing as when running a 'show xlate' command you do see all the current PAT entries.
LMS is not reporting on all of my interfaces, utilization in particular. As an example, I have 1 location that is connected via DMVPN tunnels, when I run a utilization report, it only comes back with information for 1 interface, a random interface, port FA 1/7 on the switch module. If it was all of the switchports it might make more sense.
In DFM device detail the interfaces are being managed.
In the Link Utilization Poller, only 1 interface is listed (FA 1/7).
We're currently running on ACS 5.2.0.26.9 with 2 appliances (one primary and one secondary).Today, I wanted to get some reports from the Monitoring and Reports tool. At beginning, it seemed impossible to generate them. Later, I decided to reload first primary and then secondary. As soon as I've done it, I got an email alert telling me that it failed parsing NAD.
Cisco Secure ACS - Alarm Notification Severity: Critical Alarm Name System Alarm [Collector] Cause/Trigger
[code]....
I don't really find where I can find the Collector log...Anyway now when I generate a 30 days report, I only get data up to 23.03.2012. Nothing recent !
We've had problems with our internet router losing connection to the internet. All traffic stops, a reboot resolves the problem. The router only has a public IP and it's connect through a dummy switch to the ASA as shown. I want to be able to monitor netflow or something and wondered if I could add a static route to the 10.x.x.x network and then add the netflow commands. Here is kind of how it looks, I simplified it some by removing unnecessary devices
I live in a shared flat. And all 20 rooms are connected to this switch I believe. Is there any method to prevent the landlord/tech guy monitoring our internet activity (e.g. bandwidith activity, websites we looked at, etc.
