Cisco WAN :: ASR1004 -IOS Upgrade Site
Apr 14, 2013I have just got a ASR1004 and try to upgrade it, but, I can not find the instruction, I guess it may just same as other production by copy. but, it is good to see in writing.
View 1 Replies
ADVERTISEMENT
Cisco VPN :: ASA 5510 - Site To Site Tunnel Breaks On Upgrade To 8.3.2?
Jan 29, 2011I have a site to site tunnel (bidirectional) configured between two ASA 5510's (head office and remote office) running 8.2.2. I'm trying to upgrade one end (head office) of the tunnel to 8.3.2 but when I do that, traffic from the remote office to the head office isn't transported. Traffic from the head office to the remote office is still fine (remote desktop sessions, etc).
A quick comparison of the 8.2.2 config and the 8.3.2 config on the head office ASA look identical in terms of the crypto/site-to-site commands.Is there any Cisco guide created yet for creating site/site tunnels under 8.3.2? I'm able to upgrade both ASA at the same time if that's determined to be a prerequisite.
Cisco Firewall :: ASA 5520 K8 - IOS Upgrade And Site To Site VPN
Feb 20, 2013I have asa 5520 k8 model presently i am running with IOS version 8.0(4) i am upgrading to 8.2(5) is ? any license required from Cisco to upgrade to this IOS, and also let me know how many site to site vpn can be configure on this device.
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
Inside Hosts : Unlimited
Failover : Active/Active
[code]...
This platform has an ASA 5520 VPN Plus license. Serial Number: JMX1051K2S5.
Cisco WAN :: ASR1004 SSH 2 Sessions Terminating
Apr 24, 2013I've got a problem with an ASR1004 running "asr1000rp2-adventerprisek9.03.02.00.S.151-1.S.bin".
When I'm performing extended ping tests using a tclsh script i'm geting this error message:
ASR_X1A2#ping 172.27.1.250
% Authorization failed.
When i'm pinging 12 diffrent destinations this happens to about 3 of them.
Checking the logs I found this:
Apr 24 19:42:56.071: %SSH-4-SSH2_UNEXPECTED_MSG: Unexpected message type has arrived. Terminating the connection
In my entire backbone this is happening only in this equipment, I've checked the connection between my ASR and the TACACS and it's OK, no packet loss. CPU and MEM are OK too.
Cisco WAN :: ASR1004 - QoS / Match Protocol Command
Apr 1, 2011If I want to use the command match protocol xxxx when configuring traffic classification for QoS, is necessary to have the following licence?
-FLASR1-FPI-RTU
-Flexible Packet Inspection RTU Feature License for Cisco ASR 1000 Series.
Cisco WAN :: ASR1004 Multi Frame-Relay Switching?
Dec 14, 2010As U know cisco feature for frame-relay is creating mfr link and binding them to physical interfaces I did so but my MFR links doesn't get up?
PS. router is ASR1004
frame-relay switching
interface MFR0 description Virtual FR ---> Serial0/0/0 no ip address encapsulation frame-relay IETF frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 908 interface Serial0/0/0 908!interface MFR1 description Virtual FR ---> Serial0/2/4:0 no ip address encapsulation frame-relay IETF frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 900 interface Serial0/2/4:0 900
interface Serial0/0/0 (Smart serial interface) description Serial ---> E1 no ip address encapsulation frame-relay MFR1
interface Serial0/2/4:0 (E1 serial interface) description Link ---> S no ip address encapsulation frame-relay MFR0
Cisco WAN :: ASR1004 / Show Ip Cache Flow Is Slow And Stalls?
Jun 30, 2012Ever since we switched to ASR1004 running XE15.1(2)S1, we have seen that the output of "show ip cache flow" stalls and is super slow to complete. We have a few interfaces with "ip flow ingress" defined. What can be causing this slowness? Any recommendations of commands to speed up the output?
View 1 Replies View RelatedCisco Switching/Routing :: Radius-server Attribute 61 Extended On ASR1004
Nov 9, 2011We faced with problem after upgrade ASR from 12(2) 33 XNE2. I know that this is an old XE release but our Radius deny authization from ASR with more new XE version. Here is our radius attribute configuretion:
!
radius-server attribute 44 include-in-access-req
radius-server attribute nas-port format d
radius-server host x.x.x.x auth-port 1812 acct-port 1813 non-standard
[Code]....
How can I add in my configuration that ASR send necesserry NAS-Port-Type - VPDN
I couldn't found out any info ((( for radius-server attribute 61 extended
Cisco WAN :: 819 - Upgrade And Add Comm To Remote Site?
Sep 25, 2011I'm working on a project to upgrade and add comm to a remote site. We are going to add a 900 Mhz ethernet radio to send data to a permanent site. We also plan on adding another ethernet radio to shoot to another permanent site as a backup path. Both permanent sites are on different subnets so I figure I'll need a router at the remote site. I was told on that the Cisco 819 hardened version would probably work but after looking at the specs I'm not so sure. At this time speed isn't a big issue but in the future this remote site may be a backup path for the other permanent sites as they are both spurs off the main microwave network in this area.
View 1 Replies View RelatedCisco VPN :: 5510 Site To Site VPN Access To Servers With Overlapped Remote Site
May 18, 2012I have a requirement to create a site to site vpn tunnel on ASA 5510 from a remote site to my HO, ihave already other site-to-site tunnels are up and running on the ASA.The issue is my remote site has got the network address which falls in one of the subnet used in HO(192.168.10.0/24).My requirement is only My remote site need to accees couple of my servers in HO which is in 192.168.200.0/24 subnet.
View 2 Replies View RelatedCisco VPN :: 5520 Requirement To Terminate Site-to-site VPN From Remote Site
Jun 17, 2012We have ordered a pair of Cisco ASA5520 (ASA5520-BUN-K9).Now there is a requirement to terminate site-to-site VPN from remote site. Do we need VPN plus licence for this and how much it cost?
View 1 Replies View RelatedCisco VPN :: 877 / How To IPsec Site To Site Vpn Port Forwarding To Remote Site
Jun 13, 2012The scenario where a Site to Site VPN tunnel has been established between Site A and Site B. Lan on Site A can ping Lan on Site B. My problem is a Printer behind Site B needs to be accessed by using the WAN IP address of Site A. Also i could not ping the remote lan or printer from the router.
Below are my configure on the Cisco 877 in site A.
Building configuration...
Current configuration : 5425 bytes
!
! Last configuration change at 15:09:21 PCTime Fri Jun 15 2012 by admin01
!
version 12.4
no service pad
[code]....
Cisco VPN :: 5505 - Site To Site Connected But Cannot Ping Remote Site
Oct 11, 2011cisco products and am struggling getting a VPN going between an ASA 5505 and 5510. I have a VPN created (using the VPN wizward on both) and it shows the VPN is up, but I can't ping the remote site (from either side).
View 11 Replies View RelatedCisco VPN :: ASA 5505 / Site To Site Vpn With One Site Always Initiate A Tunnel?
Feb 7, 2011I have ASA 5505, i configured site to site vpn between central site and remote site and is working. Now the problem is we use remote site for troubleshooting purpose, so we need to create a tunnel from remote site to central site. I need to configure such a way that remote site can craete a tunnel to central site, but central site not able to create a tunnel, it just respond to remote site.
View 3 Replies View RelatedCisco VPN :: ASA 5505 Site To Site Connection / Remote Site?
Mar 6, 2011i have 2 router asa 5505 with base license i wanna make site to site vpn connection and remote site using vpn client to connect first i have hdsl router with 5 public ip i wanna try it by giving 1 public ip to each router and try the vpn but nothing work?
View 1 Replies View RelatedCisco VPN :: ASA5510 - Site To Site With Dynamic IP In One Site
Jan 27, 2012i want configure VPN between backoffice which have ASA5510 firewall with static IP and site which have cisco router 1861 with dynamic IP.
how i can configure the site to site between them?
Cisco Switching/Routing :: 1941 / K9 Unable To Ping Over Site To Site IPSEC
Jul 12, 2012I am trying to set up a site to site ipsec connection. AT site A, I have Vlan's 652-10.55.216.0/24, Vlan653 -10.55.217.0/24, Vlan 654-10.55.217.0/24 and Vlan655-10.55.219.0/24 and at site B, Vlan650-10.55.214.0/24 and Vlan651-10.55.215.0/24.The problem is that I am unable to get any associations when i do a "sh crypto isakmp sa"/"sh crypto ipsec sa" on either router at each site.I am also unable to ping by pluging in a laptop into the site at each site. Laptop at site A is set to access vlan 655 and laptop at site B is set to acess vlan 651. I can ping all the devices from one end to the other.I have turned on debug crypto isakmp, debug crypto ipsec, debug crypto ipsec errors but dont get anything at all as output.I have attached the sh run for each router Cisco (1941/K9) and switch (Catalyst 3750) at each site.
View 4 Replies View RelatedCisco Switching/Routing :: ASA 5525 - Configure Site-To-Site IPsec VPN To 3 Peers
Nov 21, 2012I have an ASA 5525 and need to configure site to site ipsec vpn to 3 peers. I currently have an existing /28 public address from my ISP that is used by other services.Is there a way to use this existing ip range to configure IPSEC tunnels to 3 peers ?
View 10 Replies View RelatedCisco Security :: ASA 5510 - Site To Site IPSEc VPN Configuration Access List
Sep 12, 2011I configurated Ipsec vpn at asa 5510. my inside ip 192.168.10.156my public ip: 85.x.x.xmy peer ip : 62.x.x.x
the project is that:
the remote site want the interesting traffic like that:
source ip 172.16.1.104 can access destination ip 10.0.154.27
My inside ip is 192.168.10.0/0 and i can not to change it 172.16.1.0/24 and i can not to add this ip at my network.
Cisco VPN :: 2901 / 2921 / 5505 ASA - Router Versus Firewall Site To Site VPN?
May 30, 2013I would like to know both Cisco 2901 or 2921 router and Cisco 5505 ASA can build site to site VPN.
1) what is the different to build site to site VPN between router and firewall ?
2) which is the best choice if using in site to site VPN connection ?
Cisco VPN :: 5510 Site-to-Site VPN Internet Access From Branch Office For Group
Mar 6, 2013Our Headquarter (asa 5510) is running a site to site vpn connection with a Branch office (router 2811). All remote users are accesing the internet through the VPN and also accesing headquarter file servers.I want to know if there is a way for some remote users to be able to use the vpn for accesing the file servers but to access the internet through the branch office. The rest of the remote users will be still accessing the internet through VPN.
View 2 Replies View RelatedCisco VPN :: 5505 Connection To Mapped File Shared Dropping On A Site-to-Site VPN
Nov 27, 2011We've just deployed a site-to-site VPN using a 5505 ASA on the client's site and a checkpoint Nokia FW on our site. Everything seems to be fine except that the user's connections to their file shares seem to be intermittently dropping. One minute the connection to the shares is there, next thing it's lost. There is no logic to it because no two users are experiencing issues at the same time, as a matter of fact even on the same PC where a user has access to 3 shares on 3 different servers, one could be showing as connected whereas the other two be dropping. [code]
As you can see the Duplex and Speed are set to auto, I've rectified this since then and I'm keeping a close eye on the output errors, and collisions. However, I'm afraid that this did not rectify the issue and the users are still experiencing intermittent connection dropping to their file shares over the VPN!
Cisco Firewall :: ASA 5505 / Site To Site VPN Using Public Addresses On Local Network
Jul 28, 2011I have a request to establish a site to site VPN with a customer. While collecting the information I give them our local network subnet which is a private subnet (192.168.5.0). They asked me if I could give them a public address instead. They can not work with the 192.168.5 subnet. Is this possible?
My side of the VPN is an ASA 5505 running 8.2(2). The other side i believe is a Checkpoint.
Cisco VPN :: ASA 5510 Implicit Deny Access Rule Blocking Site-to-Site VPN?
Apr 22, 2012I've setup a site to site vpn on an ASA 5510 using ASDM (as I have many times before) and the tunnel appears to be up but I am not able to pass traffic. When I run the packet tracer from my inside network to the remote destination network, it shows that it is blocked by the implicit deny ip any any rule on my inside incoming access list.
View 5 Replies View RelatedCisco Firewall :: ASA 5505 Site To Site RTP Traffic Is Hitting Deny All Rule?
Aug 13, 2012Got an ASA5505 connected to another endpoint running IPsec and being NAT'd at each end to a 10.0.0.0/24 network. I can pass other types of traffic through the ASA 5505 but not RTP traffic. The moment it is NAT'd and hits the firewall rules it gets denied by the default deny at the bottom of the list.
Currently the rules are as follows
Incoming External
allow ip any any
allow tcp any any
allow udp any any
default deny
[code].....
It wont allow us to setup a voip call...however when the same call manager sets up a voip call NOT using this ipsec tunnel it works just fine.
Cisco VPN :: ASA 5510 - AnyConnect Users Cannot Access Remote Office Over Site-to-site
Jul 15, 2012we have two ASA 5510s one in 8.4(4) and one in 8.2(5) in a site-to-site VPN setup. All internal traffic is working smoothly.Site/Subnet A: 192.160.0.0 - local (8.4(4)) Site/Subnet B: 192.260.0.0 - remote (8.2(5)) VPN Users: 192.160.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible.
Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise.There are also some weird NAT rules that I am not happy with that were created after I upgraded Site A ASA to 8.4
Site A internal: 192.160.x.x External: 55.55.555.201(main)/202(mail)
Site B (over site-to-site) is 192.260.x.x External: 66.66.666.54(all)
I pretty much just have the basic NAT rules for VPN, Email, Internet and the site-to-site.What do I need to add for the VPN to be able to access the site-to-site network?
Here is my NAT config:
nat (inside,Outside) source static DOMAIN_LOCAL DOMAIN_LOCAL destination static VPN_Network VPN_Network no-proxy-arp route-lookup
nat (inside,Outside) source static DOMAIN_LOCAL DOMAIN_LOCAL destination static DOMAIN_REMOTE DOMAIN_REMOTE no-proxy-arp route-lookup
!
object network DMZ_Network
nat (DMZ,Outside) dynamic interface
object network DOMAIN_LOCAL
[code]....
Cisco VPN :: Remote Client Cannot Connect To Local Network Or Site To Site ASA 5510
Jul 21, 2011I setup RA-VPN under local asa 5510 IP pool (192.168.127.0/24) and all was working fine. I got internet and local network access.
Then i have 5 site to site VPN working fine but when im traying to access to those L2L VPNs from the remote acces client im not able to do that. So after that i decided to obtain IP addresses from my DHCP server so i can obtain IPs from my local network (172.17.16.0/16) and then access normally to the VPN site to site. But the surprise was that the VPN cisco client is getting local IP address (172.17.16.222) perfectly but im not able to access even to my local network.
I have the same-security-traffic permit inter-interface same-security-traffic permit intra-interface enable.
Cisco WAN :: 2911 - Site-to-site IPsec Vpn / Unable To Ping Remote Network
Apr 3, 2013I have two Cisco routers - 2911 in HQ and RV180 in branch office. Because in HQ LAN network I have some development servers, to which guys from branch office need to have acces, I decided to setup VPN site-to-site between HQ and branch office. Everything went quite smoothly, on both devices I see, that ipsec connection is established. Unfortunately I am not able to ping resources from one network to other one and vice versa. Below is the configuration of 2911 router (I skipped som unimportant (imho) configuration directives) :
crypto isakmp policy 1
encr 3des
hash md5
[Code].....
Cisco VPN :: ASA 8.2(1) / ASDM 6.2(1) - Site-to-site Connection Creation Broke AnyConnect Access
Feb 7, 2012ASA = 8.2(1)
ASDM = 6.2(1)
Recently I used the wizard to create an IPsec site-to-site connection, which went very smoothly; however, I now noticed that when I connect via Anyconnect 2.5.0217 I cannot get to local and subnatted resources on the network.
I rolled back to saved config file, which was taken before the site-to-site vpn was created, but that did not work as well.What should I check to see why I can no longer get to different subnets after the site-to-site vpn connection.
Cisco Firewall :: ASA 5510 Identity NAT Configuration For Remote Access VPN And Site-to-Site
Mar 9, 2011I am try to configure ASA 5510 with 8.3 IOS version.My internal users are 192.168.2.0/24 and i configured dynamic PAT and are all internet .
i want configure identity NAT for remote access VPN.Remote users IP pool is 10.10.10.0 to 10.10.10.10
i know to configure NAT exemption in IOS 7.2 version. But here IOS 8.3 version. configure NAT exemption for 192.168.2.0/24 to my remote pool( 10.10.10.0 to 10.10.10.10).
Cisco VPN :: ASA 5510 - ISP Site To Site Failover With Single Remote Peer Address
Apr 16, 2011I have a ASA 5510 actve/standby and create one site to site VPN with remote peer ip address xx.xx.xx.xx, Our VPN traffic running on 6 mb internet link for video conferancing traffic.Now client give another link 2 mb internet and client told to us our data traffic runnig on 2 mb link but this data traffic running on the same remote peer IP xx.xx.xx.xx.
Secondly request also they need failover over the ISP link.
how we immplement the same on ASA 5510.
Cisco :: ASA 5505 Site To Site RTP Traffic Is Hitting Deny All Rule?
Aug 14, 2012Got an ASA5505 connected to another endpoint running IPsec and being NAT'd at each end to a 10.0.0.0/24 network. I can pass other types of traffic through the ASA 5505 but not RTP traffic. The moment it is NAT'd and hits the firewall rules it gets denied by the default deny at the bottom of the list.
Currently the rules are as follows
Incoming External
allow ip any any
allow tcp any any
allow udp any any
default deny
[code]....
It wont allow us to setup a voip call...however when the same call manager sets up a voip call NOT using this ipsec tunnel it works just fine.
Cisco Firewall :: Adding Multiple Site To Site VPNs In ASA 5510
Oct 10, 2012I have a ASA 5510 at our corporate HQ that has one site to site VPN. I need to add 6 additional site to site VPN's to this ASA for our remote branches. How can I add them without affecting the existing site to site VPN? The 6 site to site VPN's will all have the same settings however these settings are different from the existing site to site that I already have set up. How can I set it up so the 6 additional VPN's use their own crypto map and all use the same settings?
View 1 Replies View Related