Cisco WAN :: GRE Tunnel Support On 3925 Router
Feb 21, 2012To have GRE tunnel support in a Cisco3925 do I need any specific license (DATA, SEC, etc) or it is include in the UNIVERSAL IOS?
View 1 Replies
ADVERTISEMENT
Cisco VPN :: 3925 - LAN-LAN IPsec Tunnel Command Unavailable
Apr 14, 2011I'm looking to utilize one of my 3925's to create a LAN-LAN IPsec VPN tunnel with another site.
I was under the impression that I needed to get a securityk9 license installed and then I would be good to go. I got a temporary 60 day trial license and successfully installed it, but none of the commands that I need to create the tunnel are showing up for me.
I'm trying to use the "crypto isakmp" command, but that is not showing up: Router(config)#crypto ? ca Certification authority key Long term key operations pki Public Key components
Here's my show license:
Index 2 Feature: securityk9
Period left: 633 weeks 4 days
Period Used: 0 minute 0 second
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
Cisco WAN :: How Many Crypto Maps Would 3925 Support
Feb 18, 2011I have a network architecture like the one HERE but with alot more spokes (32). Would my cisco 3925 be able to support so many crypto maps?
View 2 Replies View RelatedCisco VPN :: Which Router Can Support 100k Or 50k On L2TP Tunnel Session
Jul 30, 2011I have a request from my customer asking to provide a model of cisco router that can support 100k or 50k L2TP tunnel session. I have searching around the cisco website but cannot find the right answer.
View 1 Replies View RelatedCisco Routers :: RV016 Split VPN Tunnel Support?
Jan 25, 2013I read a rumor that the RV016 does not support split VPN tunnels.
[URL]
My understanding is that VPN tunnels on my RV042 routers will send internet traffic out the local gateway, and only send traffic thru the VPN tunnel if it is destined for the remote subnet. That is my understanding of "split tunnel".
Is that not true with the RV016?
Cisco WAN :: Does Nexus 7000 Support Ipv6 6to4 Tunnel
Nov 23, 2011Does Nexus 7000 support ipv6 6to4 tunnel?
View 3 Replies View RelatedCisco VPN :: Performance Of 3925 Router?
Jul 6, 2011I have spend half day to look up this question in cisco official web site, but get nothing . Any infomation about vpn performance of 3925 router？Produce : cisco 3925 ( Cisco 3925 Security Bundle w/SEC license PAK )Question is , how much ipsec vpn tunnels can be carried as a vpn server of this bundle ? if more licenses may be bought, how much most tunnels can be held？
View 5 Replies View RelatedCisco WAN :: How To Setup NAT On A 3925 Router
Feb 26, 2011how to setup natting on a 3925 router.
View 1 Replies View RelatedForgot Password For Cisco 3925 Router?
Nov 30, 2012i said in the title i have forgot my password for my cisco3925 rourtor and how to reset my password
View 3 Replies View RelatedCisco WAN :: Install ATM Module In 3925 Router?
Mar 14, 2012I need to install an ATM module in a 3925 router. I would like to know if this card is that I have to buy with the transceiver(SFP)?
Will use a fiber cable LC LC singlemode fiber optic.
Module: NM-1A-OC3-POM
Transceiver :SFP-OC3-IR1
Cisco WAN :: How Many Numbers Of GRE Tunnels Are Supported On 3925 Router
Apr 29, 2013How many numbers of GRE Tunnels are supported on Cisco 3925 router?
View 2 Replies View RelatedCisco VPN :: How Many Numbers Of GRE Tunnels Are Supported On 3925 Router
Apr 28, 2013How many numbers of GRE Tunnels are supported on Cisco 3925 router?
View 1 Replies View RelatedCisco WAN :: Telnet Access Through Router 3925 Not Working?
Feb 18, 2013i have 68 sites with Routers. On each site I have one equipment DIRECTLY connected to the Router that needs to be accessed by telnet port 23.
I have 15 off this sites that the access via telnet to the equipment’s connected after the routers are not working. These sites are using Router Cisco 3925. The other sites that are working are using Routers Cisco MWR 2921.
Both router models are running the same configuration with no filter on it.
The equipment’s after the routers are all accessed directly via telnet without the router. If the router is directly plugged to the equipment the 15 sites with Router Cisco 3925 are not accessed via telnet.
There is any bug related with the IOS version that Router Cisco 3925 is using?:
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.1(2)T2, RELEASE SOFTWARE (fc1).ROM: System Bootstrap, Version 15.0(1r)M8, RELEASE SOFTWARE (fc1).System image file is "flash0:c3900-universalk9-mz.SPA.151-2.T2.bin"
Cisco WAN :: 3925 Router Not Routing IP Traffic Between Two GB Interfaces?
Jan 14, 2013We currently installed a 100Mbps fiber line with Ethernet hand-off. I purchased a Cisco 3925 ISR to be the gateway for this connection. I am not going to use it for any security purposes. I have an ASA5520 that will do that work. Right now I am currently just trying to get the router online.
I know the following
Laptop <--->GB 0/1((()))GB0/0<---->Ethern
et handoff from ISP.
I can ping and SSH to the outside interface of the router from outside the network. I can also ping and SSH to the router from the laptop that is directly attached to the routers GB0/1 port. From the Router's CLI I can ping IP addresses on the internet. From the laptop I can not. I can not access the internet through the router though. Here is my config.Building configuration...
Current configuration : 3724 bytes!! Last configuration change at 02:17:03 UTC Tue Jan 15 2013 by ggsis! NVRAM config last updated at 02:09:33 UTC Tue Jan 15 2013 by ggsis! NVRAM config last updated at 02:09:33 UTC Tue Jan 15 2013 by ggsisversion 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname XXXNAMEXXX!boot-start-markerboot-end-marker!!logging buffered 51200 warningsenable secret 4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX!no aaa new-modelmemory-size iomem 20!no ipv6 cefip source-routeip cef!!!!!no ip domain lookupip domain name XXXXXXXXXXXXXXDomainXXXXXXXXXXXmultilink bundle-name authenticated!!crypto pki token default removal timeout 0!crypto pki trustpoint TP-self-signed-XXXXXXXXXXXXXXXXenrollment selfsignedsubject-name cn=IOS-Self-Signed-Certificate-XXXXXXXXXXXXXrevocation-check nonersakeypair TP-self-signed-XXXXXXXXXXXXXX!!crypto pki certificate chain TP-self-signed-XXXXXXXXXXXXXXcertificate self-signed
[code]...
Cisco Switching/Routing :: Hostname Error On 3925 Router
Nov 8, 2011I was trying to give the following host name to my 3925 router.Iht comes up with the following error. DRT0(config)#hostname DRT#0 % Hostname contains one or more illegal characters.% Hostname "DRT#0" is not a legal LAT node name, Using "CISCO_000000" DRT#0(config)#
View 2 Replies View RelatedCisco WAN :: 1941 Router - Enable IPSec Virtual Tunnel Interface With Tunnel Mode IPv4
Sep 23, 2012I'm in process of purchasing a new Cisco routers for our branches that will be used primary to enable IPSec virtual tunnel interfce with "tunnel mode ipsec ipv4". does the default IOS IP Base supports this feature? or i need to purchase DATA license or SECURITY license?
View 4 Replies View RelatedLinksys Wireless Router :: Port Forwarding With EPC 3925
Nov 14, 2012Im going to change my NAT status to "open" on my xbox 360, but I don't have access to the router I think. Its my grandmas internet and im going to be here for 10 days so it could be nice if you could tell me the username and password so i can open the ports?
Model:Cisco EPC3925Vendor:CiscoHardware Revision:1.0 MAC Address:18:59:33:ad:b0:a0Bootloader Revision:2.3.0_R1Current Software Revision:EPC3925-ESIP-16-v302r125532-110504cFirmware Name:epc3925-ESIP-16-v302r125532-110504c.binFirmware Build Time:May 4 17:40:26 2011Cable Modem Status:OperationalWireless Network:Enable
Cisco Switching/Routing :: Enable AutoQoS On Giga Interface On 3925 Router?
Apr 3, 2012I was trying to enable AutoQoS on my router 3925 GE interfaces, but failed to do so !! But I was able to do so on FE interfaces !! I have Security/K9 and Data/K9 license on this router. Or do I still miss out anything ?? I am on IOS 150-1(M4).
I was able to enable AutoQoS on all my Cisco 2811 and 1841 routers !
Cisco VPN :: IKEv2 Site To Site Between ASA5515 And 3925 Router?
Nov 14, 2012how to configure a site to site tunnel using IKEv2 between our offices using an ASA 5515-X and a Cisco 3925 router running IOS 15.2 Connecting ASA to ASA and ASA to Router via IKEv1 works fine. Want to take advantage of the improvements in IKEv2 but I'm having difficulty with the ikev2 setup on the router. Here is the pertinent ASA side config--
ASA IP: 5.5.5.5
Router IP: 10.10.10.10
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1
[Code].....
Wireless :: Can Wireless Router Support Up To 100 User Including Support Network Printer
Feb 16, 2011can wireless router support up to 100 user including support network printer
View 1 Replies View RelatedCisco WAN :: 3925 BGP And IPSEC VPN
Jul 25, 2012I need 3925 router that support BGP as well as IPSEC VPN. is this correct part number i ordered? CISCO3925-SEC/K9. Its always hard to understand Cisco licensing, specially new one. will above package will have router wth ipbasek9+seck9?
View 4 Replies View RelatedCisco WAN :: 3925 ISR G2 - Configuration
May 24, 2011I have a new 3925 ISR G2 router with the universal IOS, 256kb flash in CF0, 1gb flash in CF1. When the router boots it prompts to enter initial config. Whether I say yes or no, enter the appropriate info, "write memory", and reload it comes up with a blank config. I've checked the config-register (2142), copied the start up-config to nvram:, flash0:, and flash1: but nothing works.
View 2 Replies View RelatedCisco WAN :: 3925 - Telnet Is Not Working
Apr 19, 2013I have one router 3925 equipment DIRECTLY connected to the Router that needs to be accessed by telnet port 23.
Please find the attached config details.
Cisco WAN :: 3925 CLI Is Rejecting Commands
Nov 6, 2012I have a Cisco 3925 router running IOS 15.2 I am trying to configure IP SLA on it. The configuration is supposed to be what is pasted below. but the CLI is rejecting the commands.Its taking oly the "ip sla responder" command after that if I enter "ip sla 1083180034" command it says invalid input. [code]
View 5 Replies View RelatedCisco Switching/Routing :: 3925 - How To Add New ACL
Nov 13, 2011I have a question regarding the 3925 router. In the past on my old 3660's, in order to add a new line to an ACL, I would have to remove the entire ACL and readd it when adding new ACL lines to the list. Is this required on the 3925's, or is it like the ASA 5520's where you can just add an ACL any 'ol time without having to remove/add the entire ACL list?
View 2 Replies View RelatedCisco WAN :: 3925 - No Frame On E1 Controller
Jan 25, 2012we are configuring a ras on 3925 router with e1 controller. when we connect the e1 controller to pbx we got on pbx a no frame alarm (detailed error is that we have nfas but we do not have cas). what could be the error? do the router need dsp to have a framed e1?
View 1 Replies View RelatedCisco WAN :: 7201 Option To Send All Traffic Through GRE Tunnel / L2TPV3 Tunnel
Jan 9, 2011i have a 7201 router with NPE-G2. i have a design which i have the option to send all the traffic through a GRE tunnel or a L2TPV3 tunnel.which method is more CPU consumption ?
View 1 Replies View RelatedCisco WAN :: What Is Procedure To Recover Password In 3925
Dec 20, 2010checked all the recovery doc, however, there is no one specific for 3900 series router
View 2 Replies View RelatedCisco WAN :: 3925 Cannot Swap Hwic Without Reload
Dec 20, 2012I have cisco router 3925 and i add install HWIC-4ESW, as i sew on cisco documents you can hot swap the hwic without reload the router but i it's not working at all. How to do it ?
View 1 Replies View RelatedCisco WAN :: 3925 Connected To Internet For VPN Backup
Mar 10, 2013I am trying to set up a redundant OSPF setup and I am seeing behavior I don't quite understand. At the main office I have two routers, a 3825 connected via full DS3 to the MPLS cloud, and a 3925 connected to the Internet for VPN backup.There are nine branches, but I am only going to talk about three. The three branches all connect together as well as having their own MPLS connections to the cloud. They are all 2821 routers with a 4.5 Mbps multilink interface into the cloud (three T1's). One of the branches has a backup IPSec/GRE Internet connection that I want any of them to be able to use in case of an MPLS problem (which there have been many lately, sometimes involving all of them going down at the same time). The connection into MPLS uses Inter-area OSPF with the provider. The Tunnel connection is also using IA OSPF (the main office is area 0 and this cluster of branches are all on area 100).
OSPF seems to be behaving oddly. At the main office, on the 3825 with the "backup" shut off, if I do "show ip route 10.51.0.0" it shows this output: [code]If the metric before was 24, why would it put in a route with a metric of 53 now? What's worse is that the branches all think they should connect over the MPLS and the main office sends everything over the VPN. It works, but I don't really want asymetric routing! I have included some configs as well... those which I consider relevant. I am including a diagram that has more on it than is relevant, but what I referenced is here (and yes, spanning-tree has been properly configured on the red fiber connections with the connection between FEC2960 and Hl2960 blocking, but try to ignore the LAN stuff because this is in a transitional phase right now anyway).
Cisco WAN :: 3925 - Access To LAN Through Internet Without VPN Client
Apr 12, 2012I want to connect my clients from the Windows WS to a VPN Tunnel using 3925 router w/o Cisco VPN client. Is there the way to use native IPSec client on Windows XP or Windows 7?
View 1 Replies View RelatedCisco :: 3925 H.323 Monitor Via SNMP (Solarwinds)
Apr 9, 2013Monitoring H.323? I've got a 3925 running15.1(3)T with 9 PRI's. Because of our volume, syslogging is not the desired solution. We want something that we can potentially graph over an 8 hour period, so while the RTMT is accurate, either it won't store the data for 8 hours, or we aren't using it correctly (plus, mgmt may want access to the stats/graphs, and we're not keen on granting them access). So far, we've used: [code] None of these seem to accurately portray utilization. cdsp Active Channels seems to get the closest, so perhaps I have to tweak it a little bit, but so far, nothing accurate.
View 3 Replies View RelatedCisco WAN :: 3925 - E1 Framing Over Microwave Link
May 8, 2011Recently fitted 2 3925 routers on a WAN Mulitlink (2 * 2Mb) which has been working reasonably well but have noticed CRC's and intremitteny up/downs on E1 links. This could be due to issues with Microwave links but on checking nothing stands out on these - no errors or traps form radios.
Anyway taing a closer look at E1 lines and had some questions:-
Microwave radios E1 circuits are set to UNFRAMED, router interfaces set to NO-CRC4, didnt think this was the same?
E1 card are VWIC3-2MFT-T1/E1 and also noticed the following:-
no network-clock-participate wic 0(same for 1 and 2), my card are in slot 0 and 1.
I see no slips etc on E1 controllers .