My carrier is dropping off a single mode fiber on LC connection 10gig port but on myrouter I am using XFP-10G-MM-SR modules. Can I still use a SMF to connect from handoff to this router or do I need a different module?
View 3 RepliesWe have a core switch with the following ios and supervisor engine. Can we add a16 port LR (x2)or LRM(X2) ON the core switch?if not what modifications has to be done?if an ios upgrade is necessary is it a costly affair?At present we have two 1gb up link modules in single and multimode fiber .
#sh moduleMod Ports Card Type Model Serial No.--- ----- -------------------------------------- ------------------ ----------- 1 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL0803T308 2 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SAD07500600 5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SAL1439UMZK
#sh versionCisco IOS Software, s72033_rp Software (s72033_rp-IPBASE-M), Version 12.2(33)SXI4a, RELEASE SOFTWARE (fc2)Technical Support: [URL] Copyright (c) 1986-2010 by Cisco Systems, Inc.Compiled Fri 16-Jul-10 19:51 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1) uptime is 1 year, 27 weeks, 4 days, 23 hours, 30 minutesUptime for this control processor is 1 year, 27 weeks, 4 days, 22 hours, 58 minutes(code)
I want to connect a Cisco small business switch (sf302-8) to a Cisco catalyst 2960S over a multi mode fiber. The transceiver I am using in the catalyst is a GLC-SX-MM. I presume in the SF302, I will have to use a MGBSX1. My question is "are these transceiver compatible with each other and if not, is there a transceiver that will suit both pieces of hardware?
View 2 Replies View RelatedWe have LMS 3.2.1 and WLC version 7.0.116. I want WLC syslog to be managed by LMS. How can i acheive that..? Any special package need to app d for LMS ..?
View 4 Replies View RelatedWe have LMS 4.0.1 with 300 devices license and we want to upgrade it to 4.1, pls. let me now if it's free or any cost is assocated with it.Earlier when we directly installed LMS 4.0 license on 4.1, it was not accepting.
View 1 Replies View RelatedThe ISE compatibility Matrix (June 5, 2013), does have a row for WLC 5760 in its tables.
The WLC 5760 Release Notes says it is compatible with with ISE without specfying which features. Why is the WLC 5760 missing from the ISE Compat Matrix and how can I get specific ISE feature support (ie CoA, DACL).
I am trying to build a site-to-site VPN between cisco 1811W at a main office and SRP541W at a remote office.
I already have the configuration for the 1811W through SMD, but can't install the SDM on the SRP541W.
Does the SRP541 is compatible with SDM; and if not is there any other GUI to configure a VPN tunnel on SRP541.
I am new to fiber connections. We are have a SM fiber comming into our data center. It will terminate with Single Mode SC Unicam connectors in the fiber panel. I want to connect these to a 3760 GB switch using Cisco GLC-SX-MM Gbics. I'm guessing all I need is a SC to LC fiber connection. My question is this; is there any issue going from Single mode to Multi-mode? Do I need an adapter or do I need to find SM GBICS? The distance between the patch panel and switch is only about 10 feet.
View 9 Replies View RelatedIs there any way to provide QoS using Cisco Routers and switches and MCafee FW? ( I don't mind the model of the devices, I just need to know if there's a posibility).
View 5 Replies View RelatedI would like to know whether CSM 4.3 is compatible with ASA version 9.1(1). Any appropriate url that contains information about these two version's compatibility?
View 2 Replies View RelatedSince we have now got a go for upgrading the IOS I have a little difficaulties finding if the current IOS will upgrade correctly to the advised version without any loss.Current version is (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF7 In the realease notes for IOS 12.2(33)SXJ I can't find any upgrade matrix or upgrade train.Will this version upgrade without causing any mishaps on current WiSM(ver.1) and switch config?I didn't get any adequate answer, but since NO ONE did mention any repercussions, we did the upgrade......and we did loose configuration !Still the WiSM (version 1) is working all right, but where did the related WiSM configuration go?.How can you do a span session if you have no interface to tie onto?
View 7 Replies View RelatedTransceiver integration within Cisco 3945.I need to supervise the DOM (Digital optical monitoring) capability of LX laser integrated within CISCO 3945.But after study of the Cisco DataSheet on transceiver module compatibility:
[URL]
I've seen that the SFP-GE-L model which supports DOM cannot be integrated within Cisco 3945.As specified in the datasheet, the only model of LX lasers compliant with CISCO 3945 is GLC-LH-SM (without DOM).However, after study of this datasheet, I can see that Cisco propose this Tranceiver model with DOM capability: GLC-LH-SMD But, so far I can't figure out if this model (GLC-LH-SMD) with the DOM capability is supported on Cisco 3945 and can be monitored through monitoring tools? If not, is there an other alternative to supervise the DOM capability with transceiver (LX) to be intergated within Cisco 3925?
We have cisco ace 30 modules installed in cisco 6500 switches. For application availability purpose from the internet, we need to have some global site selector/3rd party devices with similar feature set that of cisco gss.
whether cisco ace is compatible to ge tintegrated with other 3rd party devices like F5 GTM?
I have 3 WLC's currently running version 7.0.116 and a WCS on version 7.0.220. I am looking at upgrading the versions and am uncertain as to the compatibility.
1. Upgrade the WCS to 7.0.240, and upgrade the WLC's to 7.3. Resulting in my WCS just not able to manage the "new features" in the latest WLC code?
2. Upgrade the WLC's to 7.3 resulting in WCS completely unable to manage the WLC's? I am aware there is WLC 7.4 code however I've read there is an issue with 1142 AP's rebooting.
I have inherited a 3945E router with an NM-8CE1T1-PRI card installed in slot 2 using the SM-NM adapter card. The command 'card type E1 2' has been issued but I only see interfaces Serial2/0:0 to Serial2/0:30.
Since it as 8 port card I was also expecting there to be
Serial2/1:0 to Serial2/1:30
Serial2/2:0 to Serial2/2:30
etc etc.......
Serial2/7:0 to Serial2/7:30
The router will not allow me to issue a sub slot number with the card type command.
Am I missing something in the configuration or is there an issue with this card and router combination? The show inventory has the following:
NAME: "Network Module Adapter for SM Slot on Slot 2", DESCR: "Network Module Adapter for SM Slot"
PID: SM-NM-ADPTR , VID: V01, SN: FOCxxxxxxxx
NAME: "8 port channelized and PRI T1/E1 NM on Slot 2", DESCR: "8 port channelized and PRI T1/E1 NM"
PID: NM-8CE1T1-PRI , VID: V01 , SN: FOCxxxxxxxx
It doesn't give any errors when booting up and the router is running c3900e-universalk9-mz.SPA.152-1.T.bin IOS.
I'd like to deploy ISE on my network and I have two big 4500R switches : a 4510R and a 4507R. A Cisco vendor told me that these last are incompatible with ISE and that I need to buy two 4500E. When I see the price of those products i'm a bit suspiscious, since I've read on that page : [URL]
Device
#Minimum OS Version
#MAB
[Code]....
The only thing is that the minimum RAM for the version 12.2(54)SG1 is not present because it's 64Mb and those models have 32Mb. If I buy RAM and update IOS, will ISE work properly on those devices ?
I need some fiber to run between a Cisco Nexus and an IBM server with Intel NIC. It's 30meters, and LC-LC connectors.What is the difference between 62.5/125 vs 50/125?
View 1 Replies View RelatedI am specking a SRW2008P-K9 switch for a customer. They are using MM 62.5 fiber. I need to know what Gig SFP will work for them. I am also quoting them a WS-C3750X-24P-S.
View 1 Replies View RelatedWe've recently moved from using FiberChannel across an OC-48 between two data centers to GigabitEthernet. Data replication throughput has dropped from 700Mbps down to 45Mbps. The telco provider has demonstrated 1Gb throughput via UDP andTCP using T-Berts. However, when we connect two computers or servers, we do not get near the throughput performance.
View 1 Replies View Relatedi want to pick a 3g gateway HUAWEI B683 Router for my official use, but my computer is running for Mac OS, i don't know whether it is compatible with my Mac OS or not,
View 1 Replies View RelatedI am trying to connect a second desktop computer running Windows 7 to a linksys wrt160nv3 Router. The router is currently connected via Ethernet cable to a desktop running Windows XP. I tried to connect the Windows 7 computer to the router via an Ethernet cable, but that does not seem to work.
View 1 Replies View RelatedIs Huawei usb modem EC159 (ISP : Reliance Netconnect+ ,India) compatible with ASUS RT-N56U and Linksys E3200 dual band routers?
View 1 Replies View RelatedI need to understand if ASA 5550 ver 8.2(1) is comptible with IPv6, if not what is the upgrade path to make it IPv6 compatible. The requirement is dual stack of IPv4 and IPv6 should run in the same HA cluster and later will shift IPv6 completely.
The existing infrastructure is equipped with ASA with HA Active/Active mode. The command output for required details are attached here in txt mode.
I am trying to bring up a couple of ASR's. They are fitted with SPA modules (SPA-8X1GE-V2). These have SFP modules GLC-T fitted into them. For the life of me I cannot get these ports to come up. If I have a look at the inv the SFP's show as GE-T's (physically they are GLC-T's)
Is there a compatability problem with these GLC-T's on ASR 100x?
Are 887VAM-W-E-K9 and 800-IL-PM2 compatible? We have got both of them but it seems that router has a 30W power source and module has a 80W power source.
View 1 Replies View RelatedI have a WS-X6748-GE-TX with the WS-F6700-CFC daughter card. Is it possible to replace the WS-F6700-CFC daughter card with a WS-F6K-DFC4-AXL to make this compatible with the SUP-2T? Or, are there differences between the CFC and DFC base modules?
View 11 Replies View RelatedI have question about compatibility. I had set up two Cisco AP AIR-AP1131AG-E-KP. They are set under one SSID whith clients roaming between them. I want to add one or two new APs. I would like to use AIR-AP1142N-E-K9. Are they compatible? Are there any issuess using these two types together?
View 2 Replies View RelatedWhat kind of DRAM memory compatible with 3845?
View 4 Replies View RelatedI have WS-C3750X-24T-S switch with C3KX-NM-1G and now i want to put a transceiver GLC-EX-SMD= in the switch SFP port, is this GLC-EX-SMD= compatable with that switch ?. i thoroughly check the product datasheet and compatible chart but their i don't have seen ?
View 1 Replies View RelatedWe have a pair of 6500s with Sup720 running 12.2(33)SXI3. Each has an ACE-20 (s/w A2(2.0)) and FWSM (s/w v3.2(15)). We have reached a limit on the number of rules we can configure on the FWSM, and have determined that we shall upgrade to 4.1(5), with ASDM to 6.2(2)F. A question has been raised regarding the s/w on the ACE-20 modules. Do we need to upgrade them as well?
View 2 Replies View Relatedis the LMS 4.1 supports Nexus 7000 baundle ?
View 2 Replies View RelatedWe have connected a single F5 box with dual links to 2 different Cisco Catalyst switches using 802.1Q trunks. F5 is configured with RSTP mode and on Cisco Switch RPVST+ is configured.STP root bridge is hardcoded on the Cisco side. Loop Guard is globally enabled.On F5 STP link type is Auto, STP Edge port is disabled since that port is connected to the cisco switch.When we are failing over the F5 primary link to the secondary link we see 'Loop Inconsistent' on the cisco switch and things dont work after the failover.We have tried configuring the F5 as STP passthrough but that doesn't fix out the issue.I have checked out the forums and found out following recommendations
1. Configuring MSTP bw F5 and Cisco for better compatibility (Not possible from Cisco side because of a major change in large production setup)
2. Configuring VSS in Cisco switches (not possible due to hardware limitation)
3. Connecting F5 using single links to each switch (redundancy compromised)
I am wondering that on which default vlan does the F5 STP instance0 sends the STP BPDUs ? the term used on Cisco side is native vlan and others use PVIDs; that F5 default vlan should match the native vlan on cisco trunk side.
If I implement IKE V2 on Cisco ASR 1006 Router or on firewall and sets up IPsec with IKEv1 device ( Cisco Router , Juniper etc )will it work or not ?
View 6 Replies View Related