what command is required to configure ip accounting on an interface?
I would have thought to what is required is on the interface, turn on Ip accounting i.e.
int gi0/0/0
ip accounting
However, there is no ip accounting command within the interface. We are running version Version 15.1(1)S2.
How to configure SSH on a ASR 1002 and apply it to the Management Interface?
View 3 Replies View RelatedIf I choose to authenticate NCS users through Cisco ACS (5.4 in this instance) via TACACS, do I still have the ability to do accounting to track what changes they have made? I'm not getting anything in the TACACS accounting reports and I don't see anywhere to configure TACACS for accounting within NCS gui like I can on a WLC. I know that NCS has an internal audit trail but if a users account is both a local account on NCS as well as an account being authenticated through ACS does the Audit trail on NCS for that local user still contain the information about changes the user made? I ask because it looks like it does but I want to make sure I'm not going mad. Here is my example:
Local account username: NCS_Admin2AD account via TACACS username: NCS_Admin2
Audit trail for the NCS_Admin2 account on NCS looks like changes are being logged to NCS even though the user is logging in with their AD credentials via TACACS.
it seems there is no option for flexconnect registered AP's to work with external accounting server.I am using zeroshell server to authenticate with the radius server,which works perfectly!but there is no option under flexconnect security group to specify accounting server.is there a way to redierct AP to a local acoouting+authentication radius ?
View 5 Replies View RelatedI've got an issue with my ACS 5.1 implementation not updating any of the RADIUS or TACACS authz, authc, or acct records. Nothing is showing up, even though i've logged in via TACACS to several devices, and there are numerous wireless devices authenticated and online via RADIUS right now.
View 3 Replies View RelatedHow to configure ACS 5.1 local administrator accounting and where have to check the accounting log . suppose administrator logged in to ACS and created some user or delete users where will see the log , which user have they created or deleted.
View 1 Replies View RelatedACE is configured to point accounting to ACS servers but ACS servers are not seeing all the accounting logs. I can only see accounting logs from ACE for watchdog, start and stop.
View 5 Replies View RelatedFollowing best practices on cisco documentations we did set aaa acounting update periodic 5 with 250 switches in the deployment every single switch is geneating and sending 9.990 acct records this is too much the new testing parameterswe are using is aaa acounting update newinfo periodic 15 and this lowered accts by 2/3 (3500) moreover from switch monitoring the most accts records sent by it are related to the trunk-port any suggestion to mitigate this informations storm rather than raising the 15 min period to higher values?are this records generating from the trunk port normal?
View 1 Replies View RelatedI am working on cisco ACS 5.0, authentication is working fine on netscreen. Can acs be used for authorization and accounting of netscreen devices. if yes, what will be the configurations.
View 1 Replies View RelatedHow does one find the top user or IP accounting with this ASA5505 v7.22 device?
-With 1841 ISR:
-sh ip accounting
-sh ip flow top
Very lame if they don't have similar commands or capabilities on the ASA series.
I am setting up reports for tacacs accounting on ACS 5.3. However, accounting only seems to work after entering enable mode on the switch. I would like to see all commands, even the enable command when in privlage 1 mode.
View 2 Replies View RelatedI have installed DCNM 5.2(2c) on windows box to manage Nexus 7K devices.\ have for the time being one device that i have manage and i see often the following text:Discrepancy in device accounting log,Recommended action: clear the accounting log and discover the device. Device details are not available.How can i delete the accounting log and why do i have this message ?
View 4 Replies View Relatedis command accounting for Radius supported on ACS 5.2 ? provided vendor's radius implementation supports this capability.
View 1 Replies View Relatedi changed from ACS 4 to ACS 5.2. Everything works fine but i have authentication failed in the Radius accouting reports every time when users connect through ASA or Juniper into our network. Juniper amd ASA only send accounting informations to ACS. The users are not configured on the ACS, authentication is done via external LDAP. So my question is why do o see authentication error on ACS because Juniper and ASA only send accounting packets ?
View 2 Replies View RelatedI have a WLAN configured with 802.1x PEAP pointing to an external RADIUS server. It works fine for the most part, but I'm having problem closing accounting sessions in RADIUS. I've found this is related to the client table in the WLC. The user session does not end in RADIUS unless the WLC officially removes the client from the db, which takes 5-6 minutes from what I can see (probably due to the default idle timeout of 300 seconds).
For example:
1. I connect my tablet to the test WLAN. It associates and authenticates successfully and the WLC sends the accounting info to my RADIUS server, opening up a user session. If I turn off the wifi in the tablet, the client entry stays in the WLC client table until it times out. The WLC removes my tablet from the client table after 5-6 minutes, and then the session closes in the accounting table. I can force the session to close much earlier by manually removing the client from the WLC.
2. Same as #1, but this time instead of turning of the wifi in the tablet, I choose to connect to a different WLAN in the WLC. The user session in the accounting DB never closes. If I reconnect back to the original test WLAN with 802.1x, it opens up yet another user session in RADIUS accounting. Now I have a "dead" user session in accounting that is going to be open forever unless I delete it from SQL.
Is this an issue with the end user client not sending the disassociation frame properly, or a config problem with the WLC? How can I make it so that every time a client drops from an AP or moves to a different WLAN, the WLC would immediately send accounting updates to my RADIUS server and close the user session properly?
Enabling IP Accounting or capture packets in Cisco ASA 5510 ( 8.2 ).
View 2 Replies View RelatedStruggling to find any documentation that states both "ip accounting & netflow" are supported on the new ME3600 switches. I have tried both a 12 and 15 release of software. Netflow produces no data what so ever, ip accounting only produces data (of the global network) when configured on my uplink (running MP-BGP network) unable to get specific data for user networks in seperate VRFs. Is this a case of the commands being there but not being supported?
View 0 Replies View RelatedI have a Cisco 2621XM router with two ethernet interfaces that sits before a vendor supplied VPN router. I need to see the IP traffic incoming to my router from the WAN side (fasteth0/1 below). I setup ip cef, and ip flow ingress on the interface. However -- it seems that what I see when I use "ip cache flow" command doesn't have a very long history or life. What commands am I missing so that I can see a summary of the stats over say the last 5, 10 or 15 minutes? Is this the best config that can be used for this, or can I create a more summarized report just using the router HW and IOS? Basic current configuration:version 12.3service timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname Littleboy!ip subnet-zeroip cef table event-log size 1024ip cefip cef accounting per-prefix non-recursive prefix-lengthip cef traffic-statistics load-interval 180!ip flow-cache entries 2048ip flow-cache timeout inactive 60!interface FastEthernet0/1 description Littleboy to vpn-wan ip address 10.1.0.1 255.255.255.252 ip flow ingress?
View 5 Replies View RelatedI have an error when i try to generate radius accounting.
View 4 Replies View RelatedThe "Cisco Small Business 300 Series Managed Switches Administration Guide" and the data sheet indicate that this switch can do accounting requests with a Radius server. On the SF300 switch interface/CLI, there is only the authentication port, the accounting port can not be set (and nothing is sent by the switch to the default port). I suppose that the SF300-08 does not handle accounting. Maybe I have to change for another model.
View 4 Replies View RelatedI've set up my 5540 ASA to accounting commands on TACACS+.Every moviment done through ASDM is logged on TACACS+ by this form: cmd=perfmon interval 10.What does that mean?Why doesn't it record the exaclty command I'd issued?
View 1 Replies View Relatedon the dashboard of the "Monitoring & Report Viewer" I see a lot of system alarms related to the database.The explanation of the alarm says to look at the Collector logs for the details.
View 3 Replies View RelatedI am using the CISCO SG300-28 with firmware version 1.0.0.27. I enabled RADIUS authentication and accounting. Authentication is working but there are no accounting requests/replys (Accounting on, accounting off, accoun ting start, accounting stop) when running RADIUS in debug mode. I also did a packetcapture and there are no accounting packets.
So i updated the firmware image up to version 1.1.2.0. When I now want to configure accounting in RADIUS settings then there isn't any option to set an accounting port.
Ich checked the data sheet of the switch and it says that accounting is supported:
===============================================
802.1X: RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions [URL]
===============================================
I did a second packet capture with the new firmware image and there are still no accounting packets.
The RADIUS server is configured correct for accounting because when using another NAS like a WLAN-AP with DD-WRT accounting is workings. It is working with pfsense Captive Portal (an open source firewall and routing solution with a hotspot portal).
Need deployed accounting method to log Anyconnect session details ? Do you do it via a radius server or via logging messages to a syslog server ?
Any appropriate configuration ? I am looking to log successful and unsuccessful authentications as well as session length, log on and log off times.
I've been playing around with Anyconnect authenticating to AD via ACS 5.1 but can't seem to get the accounting details I require. Similarly I have tried to catch appropriate syslog messages but again without much success.
I am going to configure the NATing on ASR1002 and expecing to have near about 1Million nat translation. Will ASR1002 support 1million nat translations ? how many NAT translations are supportable on the ASR1002 ?I am going to configure NAT on ASR1002-5G/K9 U& have FLASR1-FWNAT-RED.
View 1 Replies View RelatedRight now I have a ASR1002 running a very old IOS version.Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNE, RELEASE SOFTWARE (fc1) asr1000rp1-ipbasek9.02.05.00.122-33.XNE.bin – 25-NOV-2009?
I am looking to upgrade to a newer version.I was wondering if there are any tricks when upgradeing this IOS. Is it as easy as loading the IOS onto the ASR and then changing the bootpath or is there an upgrade path I must follow? Also would there any need for a licence between 2.x and 3.x.
The loopback of the ASR1002 is 2.2.2.2. When I use a browser to access it, I got the authentication dialog box asking for username/password. I input the information and submit. But authentication box comes back again and ask for the username/password.
The username/password is test okay. But somehow, the web GUI just does not use it.
Whether ISE-3315-K9 with ise version: Service Engine: 1.0.4.573 , supports the command level accounting
Bascially , we have integrated Cisco Switches with Cisco ISE for Device Authentication using Radius , we are able get the authentication logs on to the devices , but for any command changes or update done on Cisco devices we are not able to get the command accounting.
I do not see any start records in Radius Accounting reports but do see only Stop records ?
btw I am running ACS 5.2
How to delete the accounting/authorization Reports or logs ?
View 2 Replies View RelatedIs the GLC-LH-SM SFP compatible with the ASR1002 and how does it differ from the SFP-GE-L adapter?
View 4 Replies View RelatedWe have an ASR1002 with asr1000rp1-adventerprisek9.03.05.01.S.152-1.S1.bin software.I couldn't find any documentation on how to attach an L2 interface, in my case a subinterface with a single dot1q vlan, to a BDI interface.I'm able to create a bridge-domain interface but it's down down.The command bridge-domain on the subinterface url...
View 2 Replies View RelatedI'm aware ACL's are handled in hardware on the ASR platform but wondered if there was any way to inspect how many hits we get on each line of an ACL on the ASR, I can't seem to find a command to do this.
Using LOG is not possible due to the large number of hits.