Cisco WAN :: ASR1002 - How Does It Differ From SFP-GE-L Adapter
Feb 5, 2009Is the GLC-LH-SM SFP compatible with the ASR1002 and how does it differ from the SFP-GE-L adapter?
View 4 Replies
ADVERTISEMENT
Cisco WAN :: How To Configure NAT On ASR1002
Aug 25, 2012I am going to configure the NATing on ASR1002 and expecing to have near about 1Million nat translation. Will ASR1002 support 1million nat translations ? how many NAT translations are supportable on the ASR1002 ?I am going to configure NAT on ASR1002-5G/K9 U& have FLASR1-FWNAT-RED.
View 1 Replies View RelatedCisco WAN :: ASR1002 IOS Upgrade From 2.x To 3.x?
May 29, 2013Right now I have a ASR1002 running a very old IOS version.Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNE, RELEASE SOFTWARE (fc1) asr1000rp1-ipbasek9.02.05.00.122-33.XNE.bin – 25-NOV-2009?
I am looking to upgrade to a newer version.I was wondering if there are any tricks when upgradeing this IOS. Is it as easy as loading the IOS onto the ASR and then changing the bootpath or is there an upgrade path I must follow? Also would there any need for a licence between 2.x and 3.x.
Cisco WAN :: ASR1002 Web Logon
Jan 27, 2011The loopback of the ASR1002 is 2.2.2.2. When I use a browser to access it, I got the authentication dialog box asking for username/password. I input the information and submit. But authentication box comes back again and ask for the username/password.
The username/password is test okay. But somehow, the web GUI just does not use it.
Cisco WAN :: ASR1002 How To Attach L2 Interface
Mar 11, 2012We have an ASR1002 with asr1000rp1-adventerprisek9.03.05.01.S.152-1.S1.bin software.I couldn't find any documentation on how to attach an L2 interface, in my case a subinterface with a single dot1q vlan, to a BDI interface.I'm able to create a bridge-domain interface but it's down down.The command bridge-domain on the subinterface url...
View 2 Replies View RelatedCisco WAN :: ASR1002 - Inspection Of ACL Hits
Aug 17, 2011I'm aware ACL's are handled in hardware on the ASR platform but wondered if there was any way to inspect how many hits we get on each line of an ACL on the ASR, I can't seem to find a command to do this.
Using LOG is not possible due to the large number of hits.
Cisco WAN :: Load Balancing On ASR1002?
Jun 25, 2012One of our customer just purchased ASR1002 router, they have three internet links from different ISPs and they dont have any remote site, they have three different public IP pool as their respective ISPs. So, is it possible to load balance the internet traffic using all three link on Cisco ASR router ( IOS - Advance Enterprise Services)
View 3 Replies View RelatedCisco WAN :: BVI Configuration On ASR1002 Router
Oct 14, 2012We have a cisco7206 router which is going to be replaced with an ASR1002 router. The 7206 has some interfaces in a BVI-group - the config of which i am trying to translate over into IOS XE (which runs on the ASR1002). How to translate this config from IOS to IOS XE.
View 3 Replies View RelatedCisco WAN :: BGP Flapping Peer With ASR1002
Oct 18, 2011We are having an issue with BGP flapping peer. We have a ASR1002 as Route Reflector and it work fine with all peers except with 2 peers.
View 3 Replies View RelatedCisco VPN :: Create VPN Between ASA5510 And ASR1002
Apr 6, 2013im trying to create a VPN between a Cisco ASA5510 and an ASR1002 when my Loopback interface is The Source IP . [code]
View 1 Replies View RelatedCisco WAN :: Configuring IP Accounting On ASR1002?
Oct 23, 2011what command is required to configure ip accounting on an interface?
I would have thought to what is required is on the interface, turn on Ip accounting i.e.
int gi0/0/0
ip accounting
However, there is no ip accounting command within the interface. We are running version Version 15.1(1)S2.
Cisco WAN :: Error During Boot IOS On ASR1002?
Dec 27, 2011During the boot ios we found the error messages below. How can i clear this messages?
Missing or illegal ip address for variable DEFAULT_GATEWAY Using midplane macaddr
Missing or illegal ip address for variable IP_ADDRESS
Missing or illegal ip address for variable IP_SUBNET_MASK
Cisco WAN :: ASR1002 With Full Bgp Table(s)
Jun 19, 2011I've inherited a project building an internet connectivity solution for a large corporate. It has its own AS and its own PI space. They are putting in 100Mbit connections from 5 different Tier1's , taking full internet routing from each. Cisco ASR1002's have already been specified and purchased for the job. I'm not familiar with the ASR platform at all - is it up to the job with full routing tables? multiple instances of full tables ? (not likely to put all 5 into one box!)
View 2 Replies View RelatedCisco WAN :: ASR1002 Dynamic NAT Entries Are Not Released
May 31, 2012we are using an ASR 1002 for dynamic NAT (with route maps). I do have a Problem with the usage of the NAT pool it self.The total NAT Translations for the pool are:
#sh ip nat stat
[Id: 1] route-map natted-host-01 pool nat-pool-01 refcount 136
pool nat-pool-01: netmask 255.255.254.0
start XX.XX.202.0 end XX.XX.203.255
type generic, total addresses 512, allocated 88 (17%), missee 0
If i now look into the NAT translation Table i do get less entries:
#sh ip nat translations filter map-id dynamic 1 total Total number of translations: 43
Only a deeper look into the QFP gives here the right values:
# sh platform hardware qfp active feature nat data The ouput count matches the values I get if i isue a sh ip nat stat
My question is how is it handled internally.
We do have a problem too, with raising usage of the pool over the time.Once allocated Pool entries are not released after a period of time. And no NAT translation occur for that used IP NAT pool Addresses.
The timer on the device are set:
ip nat translation timeout 300
ip nat translation tcp-timeout 900
ip nat translation pptp-timeout 900
ip nat translation udp-timeout 120
ip nat translation routemap-entry-timeout 900
ip nat translation max-entries 750000
Cisco WAN :: ASR1002 / 1006 SFP Compatibility With SPA Module?
Aug 15, 2011I am trying to bring up a couple of ASR's. They are fitted with SPA modules (SPA-8X1GE-V2). These have SFP modules GLC-T fitted into them. For the life of me I cannot get these ports to come up. If I have a look at the inv the SFP's show as GE-T's (physically they are GLC-T's)
Is there a compatability problem with these GLC-T's on ASR 100x?
Cisco WAN :: ASR1002-X L2TP Tunnels Up But No Ping
Jun 13, 2013we are testing an ASR1002-X which acts as LNS for L2TP tunnels.
- All tunnels are UP (sh vpdn all return list of tunnels)
- VirtualAccess interfaces are UP
- C routes are added in routing table
but ping remote IPs don't work !!! [code]
Cisco WAN :: Configure NetFlow Top Talkers On ASR1002?
Sep 5, 2012I am trying to configure the NetFlow Top Talkers function on an ASR1002 with ADVENTERPRISEK9-M, Version 15.2(4)S. With this new Hardware and Software I am surprised to see that the command:
ip flow-top-talkers
top 50
sort-by packets
cannot be found on the CLI - it's just not there.
Cisco WAN :: ASR1002 - Licensing Not Supporting Any Device
Jun 30, 2011I have recently purchased ASR1002-RP1-ESP5 with 2 x 4K Broadband licenses to be used as LNS. Cisco have sent me PAK files for the licenses however when I try to enter the licenses into the device I get an error message saying that Licensing is not supported on this platform.
Any experience with this platform and installation of the broadband licenses?
When I spoke to Cisco TAC they told me that for this particular model the licensing is on "trust" basis where you buy license and do not install it on the actual router - similar to what 7200 used to do.
Cisco WAN :: Management And BITS Ports On ASR1002
Aug 30, 2011We recently purchased a Cisco ASR1002 router with four on-board Gigabit SFP-style Ethernet ports. However, when I do a "show ip interface brief", I see that there's an extra Gigabit Ethernet port. See the last interface in the following output:
ASR_1002_router#sh ip int b
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0/0 unassigned YES manual down down
[Code].....
On the router itself, in addition to the four Ethernet SFP ports, there are four additional RJ-45 ports. They're labeled "BITS", "MGMT", "CON", and "AUX". I know what the Con and Aux ports are, but what are the Bits and Mgmt ports? And is one of them the Gigabit Ethernet interface that I see listed at the bottom of the output? And if it is, is there anything special about it, or is it just another routed Ethernet port? Can I do something special with it, like out-of-line managment?
Cisco WAN :: ASR1002 Running SubPackages And IOS Vulnerability?
Apr 19, 2012We have ASR1002 routers configured to run individual SubPackages, at this point everything is operating without problems.We just received a Cisco Security Advisory informing us SSHv2 is vulnerable in our version of router code.We have to upgrade to the recommended stable release, so we downloaded, installed and expanded the IOS to expose the SubPackages on the ASR routers bootflash.
Since we are running SubPackages, do we need to upgrade all SubPackages (I.E. complete IOS upgrade) of can we just upgrade the vulnerable SubPackage? How do you determine which SubPackage contains the SSHv2 application?
Cisco WAN :: ASR1002-X - L2TP Tunnels Up But No Ping?
Jun 13, 2013We are testing an ASR1002-X which acts as LNS for L2TP tunnels.
- All tunnels are UP (sh vpdn all return list of tunnels)
- VirtualAccess interfaces are UP
- C routes are added in routing table
but ping remote IPs don't work !
LNS1# sh ver
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version 15.3(2)S1, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[Code].....
Cisco Firewall :: ASR1002 - Implement ZBF On Router?
Jun 3, 2012We are trying to implement the ZBF on our router to assist us in limiting the intial impact of DDOS attacks.We have configured the below and it appears that it's not working, as when un der attack the statistics don't increae.
[code]...
Cisco WAN :: Configuring SSH On ASR1002 / Apply To Management Interface?
Jun 30, 2010How to configure SSH on a ASR 1002 and apply it to the Management Interface?
View 3 Replies View RelatedCisco WAN :: OSPF Route Between Nexus 7010 And ASR1002?
Sep 16, 2012I cannot receive any OSPF route from Nexus to ASR1002 even they are both OSPF neighbour. I have attached the config for both, Both Nexus and ASR part of Area0.
Config
ASR1002#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface10.165.117.12 1 FULL/BDR 00:00:35 10.231.175.226 GigabitEthernet0/0/0
[Code].....
Cisco WAN :: Management Port In ROMmon Mode - ASR1002
Jun 4, 2013Is it possible to use the mgmt port when in rommon mode? I use the Mgmt port when IOS is loaded and it works fine. I reboot the router, issue a break to put it in rommon and have set some variables but my Mgmt port never has link and I cannot ping it from the network. In rommon mode it looks like this:
PS1=rommon ! >
MCP_STARTUP_TRACEFLAGS=00000000:00000000
BOOT=bootflash:asr1000rp1-adventerprisek9.03.07.03.S.152-4.S3.bin,1;
IP_ADDRESS=10.71.50.101
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=10.71.50.3
BSI=0
RANDOM_NUM=1133006948
RET_2_RTS=13:38:27 EDT Wed Jun 5 2013
RET_2_RCALTS=1370453907
?=0
Cisco WAN :: ASR1002 / Loopback Interface Will Be Accessible From Internet
Apr 16, 2013I have a router asr1002 and I need that my loopback interface will be accessible from internet ISP adderss space I have
46.xx.x.64 255.255.255.192
interface TenGigabitEthernet0/2/0.301
description -=ISP=-
encapsulation dot1Q 301
ip address 46.xx.x.66 255.255.255.248
[code]...
packets transmitted 9received 0packet loss 100 %time 8063 ms
Cisco WAN :: ASR1002 / Unable To Use BGP Route-map Match Next-hop On Inbound?
Feb 28, 2011I am running ASR1002 with latest XE IOS version asr1000rp1-adventerprisek9.03.02.01.S.151-1.S1.bin configuration bellow
router bgp 65000 bgp router-id 1.1.1.1 bgp log-neighbor-changes timers bgp 5 15 ! address-family ipv4 vrf LABR01-VRF bgp router-id 1.1.1.1 neighbor bgprrclient peer-group neighbor bgprrclient remote-as 65001 neighbor bgprrclient password 7 1234 neighbor bgprrclient update-source Loopback0 neighbor bgprrclient version 4 neighbor bgprrclient route-reflector-client neighbor bgprrclient route-map set_weight in I then tried to create new route-map and get error that match next-hop can not be used on inbound
route-map set_weight permit 10 match ip next-hop prefix-list thirdparty match as-path 1 set weight 1000
LAB-ASR1002(config)#route-map set_weight permit 10LAB-ASR1002(config-route-map)# match ip next-hop prefix-list thirdparty% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match Not sure why Cisco is not supporting a pretty basic feature for BGP route maps.I tried looking into matching other variables but I am unable to get same result as I have same routes on bgp table from multible inbound peers.
I also get this message when configuring tacacs. I looked for "new" cli but no luck:LAB-ASR1002(config)#tacacs-server host 2.2.2.2 This cli will be deprecated soon. Use new server cli
Cisco VPN :: ASR1002 Responder-only With Dynamic Peering Partner?
Mar 20, 2011i have an Cisco ASR 1002 Router. I would like to connect our dezentral location to the Router.Unfortunately has this location an standard DSL connection with an dynamic offical IP Address.I have found an Config witch can handle an dynamic IP Addess (enclosed).
Is it possible to works witch the "set responder-only" command togehter with an dynamic crypto map? How I can configure it.
crypto isakmp policy 1 encr 3des hash md5 authentication pre-share group 2 lifetime 300crypto isakmp key xxx address 0.0.0.0 0.0.0.0 no-xauthcrypto isakmp identity hostnamecrypto isakmp keepalive 10 periodic
!
crypto ipsec transform-set dezentral-location esp-3des esp-md5-hmac
!
crypto dynamic-map fil 1 set transform-set dezentral-location set pfs group2 match address 150 reverse-route
!
crypto map Filialen 1 ipsec-isakmp dynamic fil
Cisco WAN :: Find Website Specification Of Power Cables For ASR1002
Jun 5, 2013I am trying to find on Cisco's web site the specification of their power cables for the ASR1002. I am particularly interested in the NEMA specification for the US power cable CAB-AC-RA .
View 2 Replies View RelatedCisco WAN :: ASR1002 Limit Of 32 Interfaces For NBAR Protocol-discovery
Feb 15, 2011How to hit the 32 interface nbar limit on an ASR? Our ASR1002 ESP5 is now grumbling: %NBAR-4-STILE_MAX_PD_INTF: NBAR protocol-discovery is enabled on maximum number of interfaces (32) supported by this platform..Is this expected to increase in future software revisions? (or is it a h/w limitation?)Is it the same limit regardless of ESP or will I get more (how many more?) if it is an e.g. ESP20?
View 1 Replies View RelatedCisco Switching/Routing :: ASR1002 NTP Update Calendar Not Accepted?
Nov 24, 2012Recently we have upgraded from a cisco 7200 environment to an ASR1002 having to migrate the configs as well.The command "ntp update-calendar" is not accepted in the config migration , any reason why ? doesnt the ASR have an internal hardware clock ?
View 2 Replies View RelatedCisco Switching/Routing :: ASR1002 Interfacing To ONS-14454 Via Mm Fiber
Feb 7, 2012I need to interface an ASR1002 to an ONS-14454 via multimode fiber The ASR1002 will use the 1000Base SFP-GE-S SFP module in one of the built-in Ethernet ports (in 1 of the four ports) The ONS-14454 will use 10/100/1000Base ONS-SI-GE-SX SFP in the Ethernet expansion blade.
Cisco docs indicate each module is supported in specific ASR and ONS but does not indicate interfacing between the two. If these two modules will communicate without error via multimode fiber?
Cisco AAA/Identity/Nac :: ASR1002 / How To Directly Login To Number Prompt
May 28, 2012I am having a ASR 1002 V 12.2(33)XND2t which is running on Tacas?I want when i login it shoudl directly go into the # prompt. I am not interested in typing enable on > prompt.
The configs are:
aa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default none
!aaa authorization console
!aaa authorization config-commands
[code]....